Lattice gas model for O on Ni(110)

We consider the unusual behavior of the chemisorption system O on Ni(110). At a coverage of about$\text{1}\text{3}$, as the temperature is increased from room temperature to about 300°C, a wellordered (3 × 1) structure changes reversibly into a poorly organized (2 × 1) structure. This has been observed for a Ni crystal saturated with oxygen in the interior. We propose a two-dimensional lattice gas model with anisotropic and competing interactions between the adsorbed atoms to explain this behavior. Monte Carlo calculations on a 30 × 30 lattice show a transition of this type for coverages near$\text{1}\text{3}$.     

A leed-aes study of the structure of sulfur monolayers on the Mo(100) crystal face

The formation of ordered phases of sulfur on the molybdenum (100) crystal face has been studied by Low Energy Electron Diffraction (LEED), Auger Electron Spectroscopy (AES) and Thermal Desorption Spectroscopies (TDS). Sulfur was deposited from a S₂ molecular flux streaming out of an Ag₂S containing electrochemical cell inside the UHV chamber. The use of a controlled flux of S₂ allowed the careful determination of saturation values for the monolayer, as well as the formation of multilayers of sulfur. This allowed the calibration of Auger intensities in terms of sulfur coverage. Various ordered structures, c(2 × 2), (1 × 2), $\text{2}\text{1}\text{?}\text{1}\text{1}$ and c(2 × 4), were observed by LEED for different values of the S coverage. Real space models for these structures are proposed that satisfy the coverage values observed and place sulfur atoms only on high symmetry four-fold sites on the (100) molybdenum surface.     

The properties of K and coadsorbed CO + K on Ru(001): I. Adsorption,desorption, and structure

An extensive photoemission and LEED study of K and CO+K on Ru(001) has been carried out. In this paper the LEED and some XPS results together with TPD and HREELS data are presented in terms of adsorption, desorption. and structural properties, and their compatibility is discussed. Potassium forms (2 × 2) and $\text{(}\text{3}\text{×}\text{3}\text{)R30°}$ overlayers below and near monolayer coverage, and multilayer bonding and desorption is similar to that of bulk K. The initial sticking coefficients for CO adsorption on K predosed surfaces are correlated with the initial K structure, and s₀ and CO saturation coverages decrease with increasing K coverage. Two well-characterized mixed CO+K layers have been found which are correlated with predosed (2 × 2) K and $\text{(}\text{3}\text{×}\text{3}\text{)R30°}\text{K}$. They have CO to K ratios of 3:2 and 1:1, and lead to LEED patterns with (2 × 2) and (3 × 3) symmetry, respectively. The molecule is believed to be sp² rehybridized under the influence of coadsorbed K, leading to stronger CO-Ru and weaker C-O bonds as indicated by the TPD and HREELS results, and to stand upright in essentially twofold bridges.     

Characterization of oxygen,carbon, and sulfur adlayers on W(211)

Adlayers of oxygen, carbon, and sulfur on W(211) have been characterized by LEED, AES, TPD, and CO adsorption. Oxygen initially adsorbs on the W(211) surface forming p(2 × 1)O and p(1 × 1)O structures. Atomic oxygen is the only desorption product from these surfaces. This initial adsorption selectively inhibits CO dissociation in the CO(β₁) state. Increased oxidation leads to a p(1 × 1)O structure which totally inhibits CO dissociation. Volatile metal oxides desorb from the p(1 × 1)O surface at 1850 K. Oxidation of W(211) at 1200 K leads to reconstruction of the surface and formation of p(1 × n)O LEED patterns, 3 ? n ? 7. The reconstructed surface also inhibits CO dissociation and volatile metal oxides are observed to desorb at 1700 K, as well as at 1850 K. Carburization of the W(211) surface below 1000 K produced no ordered structures. Above 1000 K carburization produces a c(6 × 4)C which is suggested to result from a hexagonal tungsten carbide overlayer. CO dissociation is inhibited on the W(211)?c(6×4)C surface. Sulfur initially orders into a c(2 × 2)S structure on W(211). Increased coverage leads to a c(2×6)S structure and then a complex structure. Adsorbed sulfur reduces CO dissociation on W(211), but even at the highest sulfur coverages CO dissociation was observed. Sulfur was found to desorb as atomic S at 1850 K for sulfur coverages less than $\text{7}\text{6}$ monolayers. At higher sulfur coverages the dimer, S₂, was observed to desorb at 1700 K in addition to atomic sulfur desorption.     

A structural and kinetic study of chlorine and silver chloride on Ag(100): The transition from overlayer to bulk halide

Adsorption of chlorine on Ag(100) at 298 K leads to the formation of a chemisorbed over layer of Cl atoms with Δφ = 1.4 eV and exhibiting a sharp c(2 × 2) LEED pattern. This layer is impervious to electron stimulated desorption (ESD). At 430 K (well below the desorption temperature) Δφ decreases quite rapidly to +0.9 eV, the LEED pattern deteriorates and ESD is observed. The temperature dependence of the ($\text{1}\text{2}$, $\text{1}\text{2}$) LEED beam indicates that an irreversible change in surface Debye temperature has occurred. On raising the temperature further, evaporation of the adiayer occurs with AgCl as the sole desorption product. These results suggest that an overlayer → silver chloride transition has occurred, a conclusion which is supported by studying the properties of AgCl dosed surfaces. Chlorine dosing never leads to halide growth beyond the monolayer stage. Multilayer growth of AgCl is investigated by dosing with AgCl(g). It is found that the desorption spectra evolve in an unusual way and the observed energetics of AgCl evaporation are accounted for in terms of the reduced lattice energy of small adsorbed crystallites. LEED shows that these crystallites re-orient from (100) to (111) as their size increases.     

Structure and electronic properties of cleaved Si(111) upon Ge adsorption

The effect of ultrahigh vacuum deposition of Ge below and at monolayer coverage onto clean cleaved Si(111) surface held at room temperature is studied by low energy electron diffraction, Auger electron specroscopy and photoemission yield spectroscopy. A well ordered $\text{3}\text{×}\text{3}$ R 30° structure developes at $\text{1}\text{3}$ ML, where it replaces the 2 × 1 initial pattern; it persists at $\text{2}\text{3}$ ML before transforming into a 1 × 1 diagram which fades into increasing background at 1 ML and up. Si surface dangling bonds are replaced at $\text{1}\text{3}$ ML by states associated with Ge-Si bonds and Ge dangling bonds to which states due to Ge-Ge bonds added upon increasing coverage.     

Chemical shifts in auger electron spectra from silicon in silicon nitride

The chemisorption of nitric oxide on (110) nickel has been investigated by Auger electron spectroscopy, LEED and thermal desorption. The NO adsorbed irreversibly at 300 K and a faint (2 × 3) structure was observed. At 500 K this pattern intensified, the nitrogen Auger signal increased and the oxygen signal decreased. This is interpreted as the dissociation of NO which had been bound via nitrogen to the surface. By measuring the rate of the decomposition as a function of temperature the dissociation energy is calculated at 125 kJ mol^?1. At ～860 K nitrogen desorbs. The rate of this desorption has been measured by AES and by quantitative thermal desorption. It is shown that the desorption of N₂ is first order and that the binding energy is 213 kJ mol^?1. The small increase in desorption temperature with increasing coverage is interpreted as due to an attractive interaction between adsorbed molecules of ～14 kJ mol^?1 for a monolayer. The (2 × 3) LEED pattern which persists from 500–800 K is shown to be associated with nitrogen only. The same pattern is obtained on a carbon contaminated crystal from which oxygen has desorbed as CO and CO₂. The (2 × 3) pattern has spots split along the (0.1) direction as $\text{(m,}\text{n}\text{3}\text{)}$ and $\text{(}\text{m}\text{2, n}\text{)}$. This is interpreted as domains of (2 × 3) structures separated by boundaries which give phase differences of $\text{2π}\text{3}$ and π. The split spots coalesce as the nitrogen starts to desorb. A (2 × 1) pattern due to adsorbed oxygen was then observed to 1100 K when the oxygen dissolved in the crystal leaving the nickel (110) pattern.     

Adsorption of CO on clean and oxygen covered Ni(111) surfaces

Adsorption of CO on Ni(111) surfaces was studied by means of LEED, UPS and thermal desorption spectroscopy. On an initially clean surface adsorbed CO forms a √3 × $\text{√3}\text{R30°}$ structure at θ = 0.33 whose unit cell is continuously compressed with increasing coverage leading to a c4 × 2-structure at θ = 0.5. Beyond this coverage a more weakly bound phase characterized by a $\text{√7}\text{2}$ × $\text{√7}\text{2R19°}$ LEED pattern is formed which is interpreted with a hexagonal close-packed arrangement (θ = 0.57) where all CO molecules are either in “bridge” or in single-site positions with a mutual distance of 3.3 Å. If CO is adsorbed on a surface precovered by oxygen (exhibiting an O 2 × 2 structure) a partially disordered coadsorbate 2 × 2 structure with θ_o = θ_co = 0.25 is formed where the CO adsorption energy is lowered by about 4 kcal/mole due to repulsive interactions. In this case the photoemission spectrum exhibits not a simple superposition of the features arising from the single-component adsorbates (i.e. maxima at 5.5 eV below the Fermi level with O_ad, and at 7.8 (5σ + 1π) and 10.6 eV (4σ) with CO_ad, respectively), but the peak derived from the CO 4σ level is shifted by about 0.3 eV towards higher ionization energies.     

Adsorption of sulfur dioxide and the interaction of coadsorbed oxygen and sulfur on Pt(111)

The adsorption of sulfur dioxide and the interaction of adsorbed oxygen and sulfur on Pt(111) have been studied using flash desorption mass spectrometry and LEED. The reactivity of adsorbed sulfur towards oxygen depends strongly on the sulfur surface concentration. At a sulfur concentration of 5 × 10¹⁴ S atoms cm^?2 ($\text{(}\text{3}\text{×}\text{3}\text{)R30°}$ structure) oxygen exposures of 5 × 10^?5 Torr s do not result in the adsorption of oxygen nor in the formation of SO₂. At concentrations lower than 3.8 × 10¹⁴ S stoms cm^?2 ((2 × 2) structure) the thermal desorption following oxygen dosing at 320 K yields SO₂ and O₂. With decreasing sulfur concentration the amount of desorbing O₂ increases and that of SO₂ passes a maximum. This indicates that sulfur free surface regions, i.e. holes or defects in the (2 × 2) S structure, are required for the adsorption of oxygen and for the reaction of adsorbed sulfur with oxygen. SO₂ is adsorbed with high sticking probability and can be desorbed nearly completely as SO₂ with desorption maxima occurring at 400, 480 and 580 K. The adsorbed SO₂ is highly sensitive to hydrogen. Small H₂ doses remove most of the oxygen and leave adsorbed sulfur on the surface. After adsorption of SO₂ on an oxygen predosed surface small amounts of SO₃ were desorbed in addition to SO₂ and O₂ during heating. Preadsorbed oxygen produces variations of the SO₂ peak intensities which indicate stabilization of an adsorbed species by coadsorbed oxygen.     

The chemisorption of carbon monoxide on a Co(0001) single crystal surface; studied by LEED,UPS, EELS,AES and work function measurements

The chemisorption of CO on Co(0001) has been investigated by LEED, UPS, EELS, Auger and sp measurements. CO is molecularly adsorbed on Co(0001) in the investigated temperature range from 100 to 450 K. This is deduced from the UPS and EELS results and the reversibility of the sp and LEED data. The isosteric heat of adsorption has a constant value of 128 kJ/mol up to a coverage of $\text{1}\text{3}$ and drops then to about 96 kJ/mol. This coincides with the completion of a (√3 × √3)R30° overlayer structure and the formation of a (2√3 × 2√3)R30° CO overlayer which is fully developed at 100 K.     

Low temperature ordering of sodium overlayers on RU(001)

The adsorption of alkali metals on transition metals can produce several technologically important effects, but only limited results have been reported on the geometrical structure of such adlayers, especially for adsorption temperatures below 300 K. We have examined the adsorption of Na on Ru(001) as a function of coverage and temperature using LEED to determine the adlayer structure and thermal desorption spectroscopy to characterize binding kinetics and relative Na coverages. The only Na LEED pattern observed following adsorption at 300 K was that of $\text{(}\text{3}\text{2}\text{×}\text{3}\text{2}\text{)}$ structure which occurred near saturation of the first layer. However, Na adsorbed at 80 K produces a progression of distinct, ordered LEED patterns with increasing coverage which does not include the $\text{(}\text{3}\text{2}\text{×}\text{3}\text{2}\text{)}$ pattern. These patterns result from increasingly compressed, hexagonal arrangements of adsorbate atoms which are uniformly spaced due to mutually repulsive interactions. The order-disorder transition temperature for each structure was also determined by LEED and used to develop a 2D phase diagram for Na on Ru(001). Ordered structures were observed only when Na thermally induced motion was sufficiently limited and the repulsive Na-Na interaction could force the uniform spacing of Na atoms. Thus, low coverage structures only developed where Na mobility was limited by low temperature. High coverage structures were stable to much higher temperatures since motion was inhibited by the high Na density.     

Coverage and adsorption-site dependence of core-level binding energies for tin and lead on Al(111) and Ni(111)

Thin layers (0.2–10 monolayers) of Pb and Sn were prepared on Al(111) and Ni(111) surfaces and characterized by means of LEED, AES, UPS and work-function measurements. The binding energy of the shallow Sn 4d and Pb 5d core-levels was investigated with respect to coverage and adsorption-site-dependent changes. On Al(111) the Sn and Pb monolayers exhibit ordered, two-domain, aligned but not in registry structures. For these layers core-level binding energies were found identical to those of the bulk metals. On Ni(111), Pb gives rise to a 3 × 3 structure, followed then by a 4 × 4 structure at higher coverages. The Pb 5d core-level binding energies shift continuously to higher values. A final shift of 0.42 eV is reached after about 2 monolayers. Sn on Ni(111) exhibits two welll separated peaks lying at 23.70 and 23.97 eV for the $\text{4d}{}_{\mathrm{<mtext>5</mtext><mtext>2</mtext>}}$ line. These two lines can be correlated with two different adsorption sites which have to be assumed for the $\text{(}\text{3}\text{×}\text{3}\text{)R30°}$ and the (2 × 2) structure found at different coverages. The binding energy shifts are discussed in a model based on a Born-Haber cycle.     

The adsorption of benzene and naphthalene on the Rh(111) surface: A LEED,AES and TDS study

The adsorption of benzene and naphthalene on the Rh(111) single-crystal surface has been studied by low-energy electron diffraction (LEED), Auger electron spectroscopy (AES) and thermal desorption spectroscopy (TDS). Both benzene and naphthalene form two different ordered surface structures separated by temperature-induced phase transitions: benzene transforms from a ($\text{3}\text{1}\text{1}\text{3}$) structure, which can also be labelled c($\text{2}\text{3}\text{× 4}$)rect, to a (3 × 3) structure in the range of 363–395 K, while naphthalene transforms from a ($\text{3}\text{3}\text{× 3}\text{3}$)R30° structure to a (3 × 3) structure in the range 398–423 K. Increasing the temperature further, these structures are found to disorder at about 393 K for benzene and about 448 K for naphthalene. Then, a first H₂ desorption peak appears at about 413 K for benzene and 578 K for naphthalene and is interpreted as due to the occurrence of molecular dissociation. All these phase transitions are irreversible. The ordered structures are interpreted as due to flat-lying or nearly flat-lying intact molecules on the rhodium surface, and they are compared with similar structures found on other metal surfaces. Structural models and phase transition mechanisms are proposed.     

Displacive surface phases formed by hydrogen chemisorption on W {001}

A detailed LEED study is reported of the surface phases stabilised by hydrogen chemisorption on W {001}, over the temperature range 170 to 400 K, correlated with absolute determinations of surface coverages and sticking probabilities. The saturation coverage at 300 K is 19(± 3) × 10¹⁴ atoms cm^?2, corresponding to a surface stoichiometry of WH₂, and the initial sticking probability for both H₂ and D₂ is 0.60 ± 0.03, independent of substrate temperature down to 170 K. Over the range 170 to 300 K six coverage-dependent temperature-independent phases are identified, and the transition coverages determined. As with the clean surface $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$ displacive phase, the c(2 × 2)-H phase is inhibited by the presence of steps and impurities over large distances (～20 Å), again strongly indicative of CDW-PLD mechanisms for the formation of the H-stabilised phases. These phases are significantly more temperature stable than the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$, the most stable being a c(2 × 2)-H split half-order phase which is formed at domain stoichiometries between WH_0.3 and WH_0.5. LEED symmetry analysis, the dependence of half-order intensity and half-width on coverage, and I-V spectra indicate that the c(2 × 2)-H phase is a different displacive structure from that determined by Debe and King for the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$. LEED I-V spectra are consistent with an expansion of the surface-bulk interlayer spacing from 1.48 to 1.51 Å as the hydrogen coverage increases to ～4 × 10¹⁴ atoms cm^?2. The transition from the split half-order to a streaked half-order phase is found to be correlated with changes in a range of other physical properties previously reported for this system. As the surface stoichiometry increases from WH to WH₂ a gradual transition occurs between a phase devoid of long-range order to well-ordered (1 × 1)-H. Displacive structures are proposed for the various phases formed, based on the hypothesis that at any coverage the most stable phase is determined by the gain in stability produced by a combination of chemical bonding to form a local surface complex and electron-phonon coupling to produce a periodic lattice distortion. The sequence of commensurate, incommensurate and disordered structures are consistent with the wealth of data now available for this system. Finally, a simple structural model is suggested for the peak-splitting observed in desorption spectra.     

Superlattices formed by interaction of hydrogen bromide and hydrogen chloride with Pt(111) and Pt(100) studied by LEED,Auger and thermal desorption mass spectroscopy

HBr and HCl react with Pt(111) and Pt(100) surfaces to form adsorbed layers consisting of specific mixtures of halogen atoms and hydrogen halide molecules. Exposure of Pt(111) to HBr yielded a (3×3) LEED pattern beginning at $\text{Θ}{}_{\mathrm{Br}}\text{=}\text{2}\text{9}$ and persisting at the maximum coverage which consisted of $\text{Θ}{}_{\mathrm{<mtext>Br</mtext>}}\text{=}\text{1}\text{3}$ plus $\text{Θ}{}_{\mathrm{<mtext>HBr</mtext>}}\text{=}\text{1}\text{9}$. The most probable structure at maximum coverage, Pt(111)[c(3 × 3)]-(3 Br + HBr), nas a rhombic unit cell encompassing nine surface Pt atoms, and containing three Br atoms and one HBr molecule. On Pt(100) the structure at maximum coverage appears to be Pt(100)[c(2√2 × √2)]R45°-(Br + HBr), $\text{Θ}{}_{\mathrm{<mtext>Br</mtext>}}\text{= Θ}{}_{\mathrm{<mtext>HBr</mtext>}}\text{=}\text{1}\text{4}$; the rectangular unit cell involves four Pt atoms, one Br atom and one HBr molecule. Each of these structures consists of an hexagonal array of adsorbed atoms or molecules, excepting slight distortion for best fit with the substrate in the case of Pt(100). Treatment of Pt(100) with HCl produced a diffuse Pt(100)(2 × 2)-(Cl + HCl) structure at the maximum coverage of Θ_Cl = 0.13, Θ_HCl = 0.11. Exposure of Pt(111) to HCl produced a disordered overlayer. Thermal desorption, Auger spectroscopy and mass spectroscopy provided coverage data. Thermal desorption data reveal prominent rate maxima associated with the structural transitions observed by LEED. Br and HBr, Cl and HCl were the predominant thermal desorption products.     

Angle-resolved photoemission of the c(2 × 2) and c(3 × 1) oxygen overlayers on Fe(110)

Angle-resolved photoemission spectroscopy utilizing synchrotron radiation has been used to study the band structure of the c(2×2) and (3×1) oxygen overlayers on Fe(110). The symmetries of the O-2p-derived states at the center of the surface Brillouin zone $\text{(}\text{Γ}\text{)}$ were identified using polarized light. At $\text{Γ}$ the p_xp_y- and p_z-derived levels are at about 5.5 and 7.0 eV below the Fermi level, respectively, for both ordered overlayers. The p-states of the c(2×2)-O structure show very little dispersion (?0.1 eV) with $\text{k}{}_{\mathrm{}}$. On the other hand, the c(3×1)-O overlayer exhibits considerable dispersion of ～1.6 eV. The essential features of the measured dispersion are reproduced well by the dispersion predicted in a qualitative way for an isolated c(3×1) oxygen monolayer.     

Halogen adsorption on Fe(100): I. The adsorption of Cl2 studied by AES,LEED, work function change and thermal desorption

The initial sticking probability of chlorine on Fe(100) at room temperature is calculated to be 0.13, and there is evidence to suggest that the chlorine adsorbs into a short lived mobile precursor state above the surface. The work function change, Δφ, is proportional to coverage and reaches a maximum value of 1.43 eV at saturation. At this coverage a c(2 × 4) LEED pattern is formed. On heating, chlorine is lost from the surface, but the mechanism is such that no detectable loss is incurred at a constant elevated temperature. The c(2 × 4) pattern is shown to be a coincidence structure formed from a $\text{(}\text{1}\text{2}\text{3}\text{?1}\text{2}\text{3}\text{)}$ net of chlorine atoms on the Fe(100) substrate. This structure is a special case of the more general $\text{(}\text{1}\text{2}\text{tan}\text{α}\text{?1}\text{2}\text{tan}\text{α}\text{)}$ structure formed at lower concentrations of chlorine. The c(2 × 4) is formed when α = 56.31°, which gives the chlorine atoms a hard sphere diameter of 0.345 nm and a concentration of 0.75 atoms per four-fold site.     

Adsorption of ethylene on the Pt(100) surface

Clean Pt(100) surfaces with bulk-like 1×1 structure, or the stable, reconstructed 5×20 structure and held at 200 or 330 K were exposed to ethylene. Ultraviolet photoemission spectroscopy identified the nature of the adsorbed species which depends on the structure and temperature of the clean surface and the amount adsorbed. It is ethylene on the 5 × 20 structure at 200 K, a vinyl radical on the same surface at 300 K up to half a monolayer, the remainder being added as acetylene; it is acetylene on the 1 × 1 surface at 330 K and a mixture of acetylene, vinyl and ethylene on the 1 × 1 surface at 200 K. Whatever the nature of the adsorbate, the surface coverage θ increased with exposure ? as $\text{(1 ? θ = C?}{}^{\mathrm{<mtext>?</mtext><mtext>1</mtext><mtext>3</mtext>}}\text{)}$. By contrast, on a surface covered with any C₂ hydrocarbon acetylene adsorbs with Langmuir kinetics. The kinetics are explained in terms of the relationship between the attraction an approaching molecule experiences from the bare surface and its Van der Waals repulsion from preadsorbed molecules.     

Effect of Bragg-Williams disorder on reconstructed polar surfaces of tetrahedrally coordinated compound semiconductors by optically simulated leed patterns

Laser generated optical diffraction patterns obtained from two-dimensional model gratings have been used to simulate the surface reconstructions observed by LEED with the polar surfaces of tetrahedrally coordinated compound semiconductors. The 2 × 2 and $\text{4}\text{3}\text{× 4}\text{3}\text{?30°}$ reconstructions conform ideally with the $\text{1}\text{4}$-monolayer criterion dictated by bonding ionicity [Nosker, Mark and Levine, Surface Science 19 (1970) 291] while the 3 × 3, $\text{3}\text{×}\text{3}\text{?30°}$ and $\text{19}\text{×}\text{19}\text{?23.4°}$ reconstructions do not. It is shown that the introduction of Bragg-Williams disorder that preserves long-range order into the latter structures does permit the achievement of conformity with the $\text{1}\text{4}$-monolayer criterion without altering the symmetry of the diffraction pattern. Specifically the intensities of the fractional order beams are reduced relative to those of the integral order beams. Thus all the observed reconstruction LEED patterns can be consistent with the $\text{1}\text{4}$-monolayer criterion, provided account is taken of the insensitivity of LEED to surface defect structure.     

A study of water vapour adsorption on the (110) surface of copper

The adsorption of water vapour on the (110)Cu face has been studied by AES and Δφ measurements in the 5 × 10^?9 to 3 × 10^?7 Torr range between 75 and 500°C. At lower temperatures, an initial physisorption of oriented water dipoles produces a fast initial Δφ decrease. Further adsorption causes no important changes of the Cu surface potential. At higher temperatures (above 100°C) a partial dissociation of the water molecules leads to a dissociative chemisorption producing a Δφ increase after the initial Δφ decrease due to water physisorption.