Imidazolium ionic liquids as bifunctional materials (morphology controller and pre-catalyst) for the preparation of xerogel silica’s

This article describes the preparation of xerogel silica’s by the sol–gel technique in the presence of the ionic liquids (ILs) 1-triethylene glycol monomethyl ether-3-methylimidazolium methanesulfonate 1 and 1-monoethylene glycol monomethyl ether-3-methylimidazolium methanesulfonate 2, using tetraethoxysilane as precursor. The addition of water to these ILs resulted in the formation of protonic acid. As a consequence, the ILs functioned as morphology controller and acid pre-catalyst at the same time. Characterization of these materials was performed by photography, scanning electron microscopy, thermogravimetric analysis and powder X-ray diffraction. Compact lamellar monoliths with interlamellar distances of approximately 1.5 nm and flat surfaces were obtained with both ILs. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Extraction of Metal Ions from Aqueous Solutions Using Imidazolium Based Ionic Liquids

This article represents a step towards how to choose an ionic liquid as the solvent to improve metal ion (Ag⁺ and Pb²⁺) extraction. The liquid-liquid solvent extraction is proposed with the following imidazolium ionic liquids (ILs): 1-ethyl-3-ethylimidazolium, or 1-butyl-3-ethylimidazolium, or 1-hexyl-3-ethylimidazolium bis{(trifluoromethyl)sylfonyl}imide [EEIM][NTf₂], or [BEIM][NTf₂], or [HEIM][NTf₂], or 1-butyl-3-ethylimidazolium hexafluorophosphate [BEIM][PF₆], or 1-hexyl-3-ethylimidazolium hexafluorophosphate [HEIM][PF₆] and the popular 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆] for comparison. The effect of anion type (NTf₂⁻ versus PF₆⁻) and the effect of structural components of an ionic liquid including alkyl chain length at the cation and the ethyl substituent instead methyl at the cation, on the extraction and re-extraction processes by using dithizone as a metal chelator, were studied at 296 K. Dithizone was employed to form neutral metal-dithizone complexes with heavy metal ions to extract them from aqueous solution into the ILs. Electronic Supplementary Material  The online version of this article () contains supplementary material, which is available to authorized users. Presented at the 236th ACS National Meeting, August 17–21, Philadelphia, USA.     

The confinement and anion type effect on the physicochemical properties of ionic liquid/halloysite nanoclay ionogels

This work is the first attempt to study the physicochemical properties of ionogels - quasi-solid hybrid materials formed by ionic liquids (ILs) − 1-butyl-3-methylimidazolium (BMIm⁺) salts with dicyanamide- (DCA⁻), bis(trifluoromethylsulfonyl)imide- (TFSI⁻), and trifluoromethanesulfonate- (Otf⁻) anions - and halloysite, a powdered clay filler with nanotube particles (at the IL:Hal molar ratio of 2:1) in order to find possible new applications of ionic liquids and industrial minerals. The electron microscopy, TG, and DSC analysis, FTIR spectroscopy, X-ray diffraction analysis, conductometry and cyclic voltammetry methods are used to investigate the anion effect on the IL interaction with halloysite. It has, for the first time, been found that the distinguishing feature of halloysite interaction with an IL determining the structural changes in the clay mineral and electrochemical characteristics of the ionogels is partial dehydration of the clay and absorption of the released water by the ionic liquid. It is shown that the halloysite dehydration effect depends on the IL hydrophilicity determined by the anion type, corresponds to the series: BMImDCA > BMImOtf > BMImTFSI. The electrochemical and thermal behaviour of ILs confined within a halloysite matrix differs from that of bulk ILs and is controlled by the anion type. Temperature dependences of the structural resistance of the halloysite filler are radically different for the ILs with high and low hydrophilicity. The effects resulting from the formation of halloysite-based ionogels can be of interest to those who develop quasi-solid ionic conductors that can work within a wide temperature range.     

Thermophysical properties of 1-hexyl-3-methyl imidazolium based ionic liquids with tetrafluoroborate, hexafluorophosphate and bis(trifluoromethylsulfonyl)imide anions

The thermophysical properties of 1-hexyl-3-methyl imidazolium based hydrophobic room temperature ionic liquids (RTILs); with tetrafluoroborate (BF₄), hexafluorophosphate (PF₆), and bis(trifluoromethylsulfonyl)imide (Tf₂N) anions, namely density ρ (298.15 to 348.15) K, dynamic viscosity η (288.2 to 348.2) K, surface tension σ (298.15 to 338) K, and refractive index n_D (302.95 to 332.95) K have been measured. The coefficients of thermal expansion α_p values were calculated from the experimental density data using an empirical correlation. The thermal stability of all ILs is also investigated at two different heating rates (10 and 20) °C · min⁻¹) using thermogravimetric analyzer (TGA). The experimental results presented in this study reveal that the choice of anion type shows the most significant effect on the properties of ILs. The chloride and water contents of ILs (as impurities) are also investigated and reported in the present work.     

Temperature dependence of the microstructure of 1-butyl-3-methylimidazolium tetrafluoroborate in aqueous solution

Many applications of ionic liquids (ILs) are closely related with their microstructure in mixtures. For example, morphology and pore size of the MCM-41 prepared in aqueous ILs are greatly dependent on the aggregation behavior of the ILs in water. Therefore, the study on the microstructure of ILs in aqueous solutions is of great importance. In this work, ¹H NMR, dynamic light scattering and attenuated total reflection infrared spectroscopy have been used to investigate the temperature effect on the structures of aqueous 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) solutions. It was shown that the size of the IL aggregates becomes larger with decreasing temperature. When the system temperature is below the upper critical solution temperature (UCST) of the binary mixture at about 4 °C, the aggregate size of the IL is larger than 1000 nm. Additionally, the two-dimensional IR results reveal that at low IL concentrations, H₂O can interact with [BF₄]⁻ prior to the CH groups of the imidazolium ring, whereas cation and anion of the IL tend to form aggregate at high IL concentrations. With the decrease of temperature, the interactions between cation and anion of the IL become stronger, but those between the IL and water become weaker, thereby resulting in the growth of the aggregate of cation with anion of the IL. This result may give a reasonable explanation for the origin of the UCST behavior of aqueous [C₄mim][BF₄] solution.     

Association of methanol and water in ionic liquids elucidated by infrared spectroscopy using two-dimensional correlation and multivariate curve resolution

Water and methanol associations in ionic liquids (ILs) have been studied by means of FTIR spectroscopy. Spectra at different concentrations of water or methanol in ILs were obtained by means of on-line dilution using a flow injection analysis system. Spectral features in the OH stretching region revealed that most of the water and methanol molecules tended to be isolated from each other and to interact with the anion of the IL via H bonding. By means of two-dimensional correlation spectroscopy, the formation of methanol and water dimers was also detected. Multivariate curve resolution was used to recover pure spectra and concentration profiles of the different species. Methanol dimers form at concentrations higher than 0.8% (w/w) in the three studied ILs, 1-ethyl-3-methylimidazolium tetrafluoroborate (emimBF4), 1-butyl-3-methylimidazolium tetrafluoroborate (bmimBF4), and 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF6). Self-association of water molecules takes place in emimBF4 and bmimBF4 at a molar ratio similar to that of methanol molecules; however, water dimers cannot be detected in bmimPF6, the most hydrophobic IL studied. No evidence was found that bigger water clusters are formed in these ILs at the studied cosolvent concentrations.     

Density functional computations of alkynylation of nitrones catalyzed by chiral zinc(II)-complexes

The alkynylation of nitrones catalyzed by chiral zinc(II)-complexes was studied by means of the density functional theory (DFT). All the intermediates and transition states were optimized completely at B3LYP/6-31G(d,p) level. Calculation results confirm that this alkynylation of nitrones was endothermic and the total absorbed energy was about 14 kJ/mol. The formation of the M5 complexes was the rate-determining step and the chirality-limiting step for this alkynylation. The transition states TS3-re involve a H(8)–O(2)–Zn(6)–C(9)–C(14)–N(13)–O(12) 7-membered ring, and thus the transition states TS3-si involve a Zn(6)–C(9)–C(14)–N(13)–O(12) 5-membered ring. The dominant reaction is the attack of nitrones from the re-surface of M4. The reactivity of anti-nitrones was stronger than that of syn-nitrones for zinc-catalyzed alkynylation of nitrones. The dominant reaction channel was cata → TS1b → M1b → M2 → M3b → TS2b → M4b → TS3b1-anti-re → M5b1-anti-re → Pro-R. The dominant products predicted theoretically were of R-chirality, (2R)-N-hydroxy-N-methylpent-3-yn-2-amine. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Using the solvation parameter model to characterize functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion

Ionic liquids (ILs) containing the tris(pentafluoroethyl)trifluorophosphate anion [FAP]⁻ have attracted increased attention due to their unique properties including ultrahigh hydrophobicity, hydrolytic stability, and wide electrochemical window. In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. The role of the functional groups, nature of the counter anion, and cation type on the system constants were evaluated. ILs containing [FAP]⁻ possessed lower hydrogen bond basicity than NTf₂-based ILs having the same cationic component; in the case of hydroxyl-functionalized cations, the presence of [FAP]⁻ led to an enhancement of the hydrogen bond acidity, relative to the NTf₂-analogs. The system constants support the argument that [FAP]⁻ weakly coordinates the cation and any appended functional groups, promoting properties of the cation which might be masked by stronger interactions with other anion systems. The chromatographic performance of the IL stationary phases was evaluated by examining the retention behavior and separation selectivity for chosen analytes. The results from this work can be used as a guide for choosing FAP-based ILs capable of exhibiting desired solvation properties while retaining important physical properties including high thermal stability and high hydrophobicity. Figure In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with tris(pentafluoroethyl)trifluorophosphate [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Ionic liquids as porogens in the microwave-assisted synthesis of methacrylate monoliths for chromatographic application

Several imidazolium-based ionic liquids (ILs) with varying cation alkyl chain length (C₄–C₁₀) and anion type (tetrafluoroborate ([BF₄]⁻), hexafluorophosphate ([PF₆]⁻) and bis(trifluoromethylsulfonyl)imide ([Tf₂N]⁻)) were used as reaction media in the microwave polymerization of methacrylate-based stationary phases. Scanning electron micrographs and backpressures of poly(butyl methacrylate-ethylene dimethacrylate) (poly(BMA-EDMA)) monoliths synthesized in the presence of these ionic liquids demonstrated that porosity and permeability decreased when cation alkyl chain length and anion hydrophobicity were increased. Performance of these monoliths was assessed for their ability to separate parabens by capillary electrochromatography (CEC). Intra-batch precision (n = 3 columns) for retention time and peak area ranged was 0.80–1.13% and 3.71–4.58%, respectively. In addition, a good repeatability of RSD_{Retention time} = <0.30% and ∼1.0%, RSD_{Peak area} = <1.30% and <4.3%, and RSD_Efficiency = <0.6% and <11.5% for intra-day and inter-day, respectively exemplify monolith performance reliability for poly(BMA-EDMA) fabricated using 1-hexyl-3-methylimidazolium tetrafluoroborate ([C₆mim][BF₄]) porogen. This monolith was also tested for its potential in nanoLC to separate protein digests in gradient mode. ILs as porogens also fabricated different alkyl methacrylate (AMA) (C4–C18) monoliths. Furthermore, employing binary IL porogen mixture such as 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim][BF₄]) and 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₄mim][Tf₂N]) successfully decreased the denseness of the monolith, than when using [C₄mim][Tf₂N] IL alone, enabling a chromatographic run to be performed with 1:1 ratio produced baseline separation for the analytes. The combination of ILs and microwave irradiation made polymer synthesis very fast (∼10 min), entirely green (organic solvent-free) and energy saving process.     

Evaluation of Spectroscopic and Morphological Properties of PMMA Modified with ILs

Summary: In recent years, an important class of new compounds, ionic liquids (ILs), has been investigated as additives for polymers. In this work, we carried out the synthesis of 4 different ILs: 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM.BF₄), 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM.PF₆), and the chiral ILs acetyl-(−)menthol-1-buthylimidazole tetrafluoroborate ([amebim]BF₄) and acetyl-(−)menthol-1-buthylimidazole hexafluorophosphate ([amebim]PF₆). These ILs were added to poly(methyl methacrylate) (PMMA) in 10, 20 and 30% ratios by weight and the ILs, PMMA and the obtained materials (PMMA:ILs) were characterized by infrared, visible spectroscopy and atomic force microscope. The ILs added to PMMA did not provide significant changes in the infrared spectra, compared to pure PMMA. However, the absorption spectra in the visible region of the PMMA:ILs materials showed differences, compared to the spectrum of pure PMMA.     

Estimates of Internal Pressure and Molar Refraction of Imidazolium Based Ionic Liquids as a Function of Temperature

Estimates of the internal pressure (∂ U/∂ V) _T of the ionic liquids (ILs) 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF₆], and 1-methyl-3-octylimidazolium tetrafluoroborate [OMIM][BF₄] were made from experimentally determined densities and speeds of sound in the temperature range 283.15 to 343.15 K. Values (∂ U/∂ V) _T for all the ILs studied are higher than those of water and molecular organic liquids. We also measured the refractive indices n _D in the temperature range 288.15 to 343.15 K and estimated the molar refraction R _M. Refractive indices of ILs were also higher than those of normal organic liquids but were comparable to those of long hydrocarbon chain organic solvents.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Characterization of Supported Ionic Liquid Phase (SILP) materials prepared from different supports

Supported ionic liquid phase (SILP) materials are a recent concept where a film of ionic liquid (IL) is immobilized on a solid phase, combining the advantages of ILs (non volatility, high solvent capacity, etc.) with those of heterogeneous support materials. In this work, new SILP materials were prepared using a series of supports with different porosity and chemical nature. An imidazolium-based IL, 1-methyl-3-octylimidazolium hexafluorophosphate (OmimPF₆), was confined at variable contents (5–60% w/w) in three different activated carbons (ACs), silica (SiO₂), alumina (Al₂O₃) and titania (TiO₂).     

Phase equilibria of imidazolium ionic liquids and the refrigerant gas, 1,1,1,2-tetrafluoroethane (R-134a)

A number of applications with ionic liquids (ILs) and hydrofluorocarbon gases have recently been proposed. Detailed phase equilibria and modeling are needed for their further development. In this work, vapor–liquid equilibrium, vapor–liquid–liquid equilibrium, and mixture critical points of imidazolium ionic liquids with the hydrofluorocarbon refrigerant gas, 1,1,1,2-tetrafluoroethane (R-134a) was measured at temperatures of 25 °C, 50 °C, 75 °C and pressure up to 143 bar. The ionic liquids include 1-hexyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)amide ([HMIm][Tf₂N]), 1-hexyl-3-methyl-imidazolium hexafluorophosphate ([HMIm][PF₆]), and 1-hexyl-3-methyl-imidazolium tetrafluoroborate ([HMIm][BF₄]). The effects of the anion and cation on the solubility were investigated with the anion having greatest impact. [HMIm][Tf₂N] demonstrated the highest solubility of R-134a. The volume expansion and molar volume were also measured for the ILs and R-134a. The Peng–Robinson Equation of State with van der Waals 2-parameter mixing rule with estimated IL critical points were employed to model and correlate the experimental data. The models predict the vapor–liquid equilibrium and vapor–liquid–liquid equilibrium pressure very well. However, the mixture critical points predictions are consistently lower than experimental values.     

A study on the liquid–liquid equilibria of 1-alkyl-3-methylimidazolium hexafluorophosphate with ethanol and alkanes

This work demonstrates the ability of the 1-alkyl-3-methylimidazolium hexafluorophosphate to act as an extraction solvent in petrochemical processes for the removal of alkanes from their azeotropic mixture with ethanol. LLE (liquid–liquid equilibrium) of the ternary systems hexane + ethanol + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆) or 1-octyl-3-methylimidazolium hexafluorophosphate (OMIM PF₆) and heptane + ethanol + OMIM PF₆ are carried out at 298.15 K and atmospheric pressure. Experimental liquid–liquid data are correlated by using different equations. The solute distribution ratio and the selectivity, determined from tie-line data, suggest the efficiency of the ILs used as solvents. A comparison with other IL, in terms of solvent capacity, is included. The liquid–liquid extraction process is simulated by using conventional software and the obtained results are shown.     

In situ solvent formation microextraction based on ionic liquids: A novel sample preparation technique for determination of inorganic species in saline solutions

In this research, a novel microextraction technique based on ionic liquids (ILs) termed in situ solvent formation microextraction (ISFME) is developed. In this method, small amount of sodium hexafluorophosphate (NaPF₆, as an ion-pairing agent) was added to the sample solution containing very small amount of 1-hexyl-3-methylimidazolium tetrafluoroborate ([Hmim][BF₄], as hydrophilic IL). A cloudy solution was formed as a result of formation of fine droplets of 1-hexyl-3-methylimidazolium hexafluorophosphate [Hmim][PF₆]. After centrifuging, the fine droplets of the extractant phase settled to the bottom of the conical-bottom glass centrifuge tube.ISFME is a simple and rapid method for extraction and preconcentration of metal ions from water samples and can be applied for the sample solutions containing very high concentrations of salt. Furthermore, this technique is much safer in comparison with the organic solvent extraction.Reliability of the introduced methodology was evaluated by analyzing water reference material. ISFME was successfully applied to determining mercury (II) in several real water samples. Michler thioketone (TMK) was chosen as a complexing agent. Analysis was carried out using spectrophotometric detection method. Type and amount of IL, temperature and the other parameters were optimized. Under the optimum conditions, the limit of detection (LOD) was 0.7 ng mL⁻¹ and the relative standard deviation (R.S.D.) was 1.94% for 40 ng mL⁻¹ mercury.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Study of the Alkyl Chain Length on Laccase Stability and Enzymatic Kinetic with Imidazolium Ionic Liquids

The activity and stability of laccase and their kinetic mechanisms in water soluble ionic liquids (ILs): 1-butyl-3-methyl imidazolium chloride [C₄mim][Cl], 1-octyl-3-methyl imidazolium chloride [C₈mim][Cl], and 1-decyl-3-methyl imidazolium chloride [C₁₀mim][Cl] were investigated. The results show that an IL concentration up to 10% is satisfactory for initial laccase activity at pH 9.0. The laccase stability was well maintained in [C₄mim][Cl] IL when compared to the control. The inactivation of laccase increases with the length of the alkyl chain in the IL: [C₁₀mim][Cl] > [C₈mim][Cl] > [C₄mim][Cl]. The kinetic studies in the presence of ABTS as substrate allowed calculating the Michaelis–Menten parameters. Among the ILs, [C₄mim][Cl] was the suitable choice attending to laccase activity and stability. Alkyl chains in the ions of ILs have a deactivating effect on laccase, which increases strongly with the length of the alkyl chain.     

Hydrogen-bonded mononuclear nickel(II) benzoate complexes: synthesis and structural studies

[Tp^Ph,MeNi(Cl)Pz^Ph,MeH] (1) has been synthesized by the reaction of hydrotris(3-phenyl-5-methyl-pyrazol-1-yl) borate [Tp^Ph,Me], NiCl₂ · 6H₂O and 3-phenyl-5-methyl-pyrazole [Pz^Ph,MeH]. The reaction of 1 with variously substituted sodium p–X–benzoates resulted in the formation of complexes of the type [Tp^Ph,MeNi(p–X–OBz)Pz^Ph,MeH] (X = H for 2, F for 3, Cl for 4, NO₂ for 5, Me for 6, OMe for 7, OH for 8, CHO for 9 and CN for 10). Single crystal X-ray studies suggest that all these complexes have a five-coordinate metal center and the benzoate groups are monodentate in a square pyramidal geometry. The X-ray studies also reveal that the uncoordinated oxygen atom of the benzoate forms intramolecular hydrogen-bonds with the NH group of the coordinated pyrazole. The substituents present on the benzoate ring are involved in different types of intermolecular interactions and the complexes exhibit different crystal packing. Complexes 2–10 were tested for superoxide dismutase activity. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

High-pressure infrared spectroscopy of ionic liquids mixed with Tween 80

In this study, the possibility of using Tween 80 to disturb the microstructures of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF₄) and 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM]PF₆) was investigated under high pressures. The imidazolioum C H absorptions of pure ionic liquids (ILs) are significantly blue-shifted under high pressures. However, mild changes in imidazolioum C H stretching frequencies were observed for IL/Tween 80 mixtures. Tween 80 may hinder cations of ILs to form network structures with anions under high pressures via pressure-enhanced cation-Tween 80 interactions. Based on the experimental results, Tween 80-[BMIM]PF₆ interactions are more effective in disturbing the local structure of imidazolium C H than Tween 80-[BMIM]BF₄ interactions.