Matrix effects in inductively coupled plasma mass spectrometry: a review

Fundamental research on non-spectroscopic interferences, also known as matrix effects, in inductively coupled plasma (ICP) mass spectrometry with sample introduction using nebulization is critically and exclusively examined in this review, starting with fundamental processes that may be a source of matrix effects during sample introduction, ion generation in the ICP, ion extraction through the interface, and ion transport through the ion optics to the detector. Various methods for attenuating matrix effects are then reviewed and illustrated with some examples. Instead of exhaustively reviewing the literature, representative references are used to comprehensively describe the main issues, several of which are also common to ICP optical emission spectrometry.     

Frontiers in elemental analysis by mass spectrometry

New developments in inductively coupled plasma mass spectrometry (ICP-MS) and laser desorption-time-of-flight mass spectrometry (LD-TOF-MS) for inorganic analysis are described. These include fundamental studies of the ion extraction, process in ICP-MS, development of a highly efficient nebulizer, isotope tracer studies, measurement of elemental speciation by liquid chromatography with ICP-MS detection and characterization of the structures of solids by ion association. The possibilities of determining inorganic species in solutions by electrospray MS are also described.     

液相色谱/元素分析-同位素比值质谱联用法鉴定蜂蜜掺假

采用液相色谱/元素分析-同位素比值质谱联用法(LC/EA-IRMS)对国内蜂蜜掺假情况进行了研究。基于测定得到的38个纯正蜂蜜样品的碳同位素δ13C值数据,提出了纯正蜂蜜样品的δ13C值要求: 蛋白质和蜂蜜的δ13C差值(Δδ13CP-H)≥~0.95‰,果糖和葡萄糖的δ13C差值(Δδ13CF-G)在~0.64‰至0.53‰范围内,各个组分间的δ13C最大差值(Δδ13Cmax)＜2.09‰。对150个日常检测样品、蜂农和蜂蜜供应商的蜂蜜样品分别采用本文建立的LC/EA-IRMS和国家标准方法(EA-IRMS)进行鉴定,LC/EA-IRMS方法检出58个掺有C3或C4植物糖浆的阳性样品,而EA-IRMS方法仅检出7个掺有C4植物糖浆的阳性样品,可见新方法大大提高了对蜂蜜掺假的鉴别能力。     

Inductively coupled plasma mass spectrometry for stable isotope tracer investigations

Inductively coupled plasma mass spectrometry (ICP-MS) has now been developed for application to stable isotope tracer investigations of several minerals/trace elements. Use of this method for such purposes requires an understanding of a number of fundamental issues: analytical chemistry performance of the method of isotopic analysis, relationship of the level of enriched isotope administered to the subject with background level of the isotope already present, the issues of cost, and finally the specific details of the biological issues to be explored.In this paper, a brief discussion of these issues is presented. As an example, the discussion is presented in relation to selected aspects of metabolism of selenium, employing the three stable isotopes⁷⁴Se,⁷⁷Se, and⁸²Se in the rat as the biological model.Analytical performance of hydride generation/ICP-MS is discussed for the required analyses of selenium isotopes. It is shown that for solutions containing 10 ng/ml Se of natural isotopic composition, optimized signal/background ratios greater than 40/1 can be obtained, resulting in worst-case detection limits (ng Se) of 2 (⁷⁴Se), and 0.6 (^77,82Se). The precision and accuracy of isotope ratio measurements for the method used routinely in biological studies is 1%. The accuracy of the method for quantitative isotopic analysis is compared with hydride generation/atomic absorption spectrophotometry (HG/AAS). The following results are given (g Se/g or ml; mean + 1 SD,n = 3–5; first HG/ICP-MS, second HG/AAS): SRM 1577a [bovine liver] 0.697 ± 0.002 versus 0.69 ± 0.01; human blood plasma 0.098 ± 0.001 versus 0.135 ± 0.008; human red cells 0.211 ± 0.002 versus 0.216 ± 0.012; and human urine 0.0473 ± 0.0003 versus 0.0489 ± 0.0003.An experiment is described with the rat to show the feasibility of the method for studies of selenium metabolism. Rats were placed on Se-free diet for eight weeks, given their Se requirements in the drinking water in the form of⁷⁶SeO ₃ ^2– and a single-day (day 3) replacement of their water with that containing highly enriched⁷⁴SeO ₃ ^2– . Isotopic analysis of carcass and selected organs revealed a high degree of isotopic enrichment with respect to⁷⁴Se during the entire eight weeks of the experiment, indicating the feasibility of this approach for detailed investigations of selenium metabolism in the rat.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Fundamental properties of a touchable high‐power pulsed microplasma jet and its application as a desorption/ionization source for ambient mass spectrometry

Plasma‐based ambient desorption/ionization mass spectrometry (ADI–MS) has attracted considerable attention in many fields because of its capacity for direct sample analyses. In this study, a high‐power pulsed microplasma jet (HPPMJ) was developed and investigated as a new plasma desorption/ionization source. In an HPPMJ, a microhollow cathode discharge is generated in a small hole (500 µm in diameter) using a pulsed high‐power supply. This system can realize a maximum power density of 5 × 10⁸ W/cm³. The measured electron number density, excitation temperature and afterglow gas temperature of the HPPMJ were 3.7 × 10¹⁵ cm^‐3, 7000 K at maximum and less than 60 °C, respectively, which demonstrate that the HPPMJ is a high‐energy, high‐density plasma source that is comparable with an argon inductively coupled plasma while maintaining a low gas temperature. The HPPMJ causes no observable damage to the target because of its low gas temperature and electrode configuration; thus, we can apply it directly to human skin. To demonstrate the analytical capacity of ADI–MS using an HPPMJ, the plasma was applied to direct solid sample analysis of the active ingredients in pharmaceutical tablets. Caffeine, acetaminophen, ethenzamide, isopropylantipyrine and ibuprofen were successfully detected. Application to living tissue was also demonstrated, and isopropylantipyrine on a finger was successfully analyzed without damaging the skin. The limits of detection (LODs) for caffeine, isopropylantipyrine and ethenzamide were calculated, and LODs at the picogram level were achieved. These results indicate the applicability of the HPPMJ for high‐sensitivity analysis of materials on a heat‐sensitive surface. Copyright © 2014 John Wiley & Sons, Ltd.     

Glow discharge mass spectrometry-a powerful technique for the elemental analysis of solids

A high resolution glow discharge mass spectrometer for the elemental analysis of solids is described. The analytical performance is reviewed and results are presented on a wide range of materials illustrating elemental and concentration coverage, quantitation and detection limits. Comparisons with other techniques are made.     

Classification of the distribution of trace impurities by spark source mass spectrometry analysis

Spark source mass spectrometry in combination with principal component analysis and clustering analysis was used to investigate the trace element distributions in metallic samples. The analysis of Zn and Cu samples and a comparison with direct imaging secondary ion microscopy demonstrated the consistency of the approach.On leave from Department of Chemistry, Nanjing Normal University, Nanjing, People's Republic of China.     

Assessment of local analysis by fourier transform laser microprobe mass spectrometry with external ion source

Laser microprobe mass spectrometry (LMMS) is a technique for local analysis of inorganic and organic constituents in the m range. This paper will focus on selected applications. First of all, element detection is illustrated by data from a 50-nm TiW layer on silicon and by the detection of residual Cr on HPLC column packing material. Speciation capabilities of LMMS are demonstrated on pure substances and on a coated neo-ceramic. Finally, the feasibility of organic analysis is shown in the case of a biologically active compound and dyed cloth fibres.     

Preliminary investigation of a tangential flow torch with coupling probe injector for helium microwave induced plasma mass spectrometry

A stable, low gas-flow torch has been developed for use with a helium microwave induced plasma (MIP). A toroidal plasma with central analyte introduction is obtained by the addition of a tantalum coupling probe injector tube. This injector penetrates through 100% of the total cavity depth and aids in the efficiency of power transfer to the cavity, in plasma initiation, and in circumventing the effects of a lack of homogeneity in the microwave field on analyte distribution in the plasma. The tangential helium flow was 41/min and the microwave power was 60 W.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Matrix effects during phosphorus determination with quadrupole inductively coupled plasma mass spectrometry

A quadrupole inductively coupled plasma mass spectrometer was evaluated for use in the detection of phosphorus. The influences of nitric acid and methanol (simulating the composition of a sample solution after nitric acid digestion) on phosphorus determination were studied using two different measuring methods at different plasma conditions: detection of phosphorus ions at m/z 31 and detection of phosphorus oxide ions at m/z 47. The existence of polyatomic interferences at m/z 31 and 47 was explored. Nitric acid and methanol are shown to be the sources of polyatomic ions and therefore cause poorer detection limits. Better detection limits were achieved in such matrices when phosphorus was detected as ³¹P⁺. The presence of methanol improves the system sensitivity towards phosphorus sevenfold; however, this positive effect is hindered by the high background signal due to carbon-based polyatomic ions. For samples with an organic matrix an appropriate mineralization procedure should be applied (high excess of nitric acid and high temperature) to quantitatively oxidize organic compounds to carbon dioxide, which is easily removed from the sample, in order to achieve correct results.     

Application of inductively coupled plasma sector field mass spectrometry for low-level environmental americium-241 analysis

An improved and novel sample preparation method for ²⁴¹Am analysis by inductively coupled plasma sector field mass spectrometry has been developed. The procedure involves a selective CaF₂ pre-concentration followed by an extraction chromatographic separation using TRU™ resin. The achieved absolute detection limit of 0.86 fg (0.11 mBq) is comparable to that of alpha spectrometry (0.1 mBq) and suitable for low-level environmental measurements. Analysis of different kinds of environmental standard reference materials (IAEA-384 - Fangataufa lagoon sediment, IAEA-385 - Irish Sea sediment and IAEA-308 - Mixed seaweed from the Mediterranean Sea) and alpha spectrometry were used to validate the procedure. The chemical recovery of sample preparation ranged between 72 and 94%. The results obtained are in good agreement with reference values and those measured by alpha spectrometry. The proposed method offers a rapid and less labor-intensive possibility for environmental ²⁴¹Am analysis than the conventionally applied radioanalytical techniques.     

The laser as an analytical probe in glow discharge mass spectrometry

A pulsed dye laser was used alone and in combination with an auxiliary glow discharge for diagnostic studies. We have compared the mass ablation rate and ion signal in high vacuum and in the presence of an ambient buffer gas. Laser pulse energy and repetition rate were studied over the analytical range of the system. The effect of ambient gas pressure on redeposition was determined for three different gases: helium, neon, and argon. The laser/auxiliary discharge system was also shown to have analytical utility for the analysis of nonconducting samples. Spectra are included to illustrate the enhancement of the laser atomization/discharge ionization scheme over laser atomization/ionization.Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Spatially and time-resolved element-specific in situ corrosion investigations with an online hyphenated microcapillary flow injection inductively coupled plasma mass spectrometry set-up

A novel technique for in situ spatial, time-resolved element-specific investigations of corrosion processes is developed. The technique is based on an online hyphenation of a specially designed microflow-capillary set-up to inductively coupled plasma mass spectrometry (ICP-MS) using flow injection sample introduction. Detailed aspects of the method development, optimization of the sample microflow introduction and flow injection characteristics for the localized corrosion analysis are described. Moreover, specific challenges of the ICP-MS analysis as applied to the analysis of corrosion sample probes, e.g. high matrix load and limited sample volume, are discussed.     

Trends of development in plasma techniques for atomic spectrometric analysis: A review

Trends of development in atomic spectrometry with plasma sources for optical emission spectrometry and mass spectrometry are discussed, especially for inductively coupled plasmas and discharges under reduced pressure. Important fields of application such as materials analysis and environmental analysis with special reference to the speciation of traces of heavy metals are discussed.Introductory lecture at the Symposium on Plasma Techniques of the 1994 International Symposium on Microchemical Techniques, Montreux, May 16–20, 1994     

Paradigms in isotope dilution mass spectrometry for elemental speciation analysis

Isotope dilution mass spectrometry currently stands out as the method providing results with unchallenged precision and accuracy in elemental speciation. However, recent history of isotope dilution mass spectrometry has shown that the extent to which this primary ratio measurement method can deliver accurate results is still subject of active research. In this review, we will summarize the fundamental prerequisites behind isotope dilution mass spectrometry and discuss their practical limits of validity and effects on the accuracy of the obtained results. This review is not to be viewed as a critique of isotope dilution; rather its purpose is to highlight the lesser studied aspects that will ensure and elevate current supremacy of the results obtained from this method.     

Profiling of trace elemental impurities in caustic soda matrix by inductively coupled plasma mass spectrometric technique

An inductively coupled plasma mass spectrometric (ICP-MS) technique method is developed for simultaneous determination of Li, Cr, Mn, Fe, Ni, Co, Cu, Sr, Ag, Cd, Ba, and Pb at trace level in caustic soda. Operational parameters of the instrument were optimized and suitable accessory (argon gas dilution) was used in the method. Direct aspiration of high total dissolved solids (TDS) samples (beyond 0.2% TDS) and highly alkaline NaOH is not suitable for the instrument; therefore, strategy of neutralization of NaOH by HNO₃ was adopted to handle its high alkalinity. Suitable internal standards of low, mid, and high atomic masses were used with external calibration. Features such as matrix matching, calibration verification, interference correction, etc. were undertaken in this work. Neutralized caustic soda samples were spiked with the analytes with lower, middle, and higher concentration. The results of spiking with 30, 70, 140, and 200 ppb were examined. The method exhibited excellent accuracy and precision.     

Analytical evaluation of electrothermal vaporization/low-pressure inductively coupled plasma atomic emission spectrometry for trace elemental analysis in microliter samples

A novel method for the determination of trace elements in microliter samples using the tantalum filament electrothermal vaporization/low-pressure inductively coupled plasma (ETV/LP-ICP) atomic emission spectrometry has been developed. An improved tantalum filament ETV was directly coupled with LP-ICP system for efficient vaporization of microliter samples and further quantitative analysis. The experimental parameters including ETV current, rf power and mass flow rate of argon carrier gas were optimized using the copper emission signal produced by 5 μl of standard solution (5 μg/ml). Under the optimized condition, the analytical performances including linearity, precision and detection limit for the developed system were investigated. Absolute detection limits in the range of 22–391 pg for selected eight elements (Fe, Cu, Cr, Mn, Pb, K, Zn and Mg) were obtained with satisfactory precision (<8.9% RSD). The feasibility of the developed system has been demonstrated by analyzing wheat gluten NIST standard sample.     

介质阻挡放电离子源质谱分析

敞开式离子化质谱可对表面样品进行直接快速分析而受到关注,成为质谱分析的热点研究方向.介质阻挡放电离子源是一种基于等离子体放电机理的敞开式离子源,近年来得到了较快的发展.本文着重介绍该离子源的基本原理、性能特征以及应用进展,并对其发展趋势进行了展望.     

Nickel species analysis of human colonic tissue using liquid chromatography,gel electrophoresis and mass spectrometry

Studies to specify metal-binding species, such as metalloproteins that are present in trace amounts in colonic cell cytosol, using chromatographic separation methods in combination with inductively coupled plasma mass spectrometry (ICP-MS) as element-specific detection require an optimised sample preparation regarding the solubilisation of the proteins. Focus should be taken to avoid metal contamination, enzymatic digestion by different proteases and oxidation. In this article different sample preparation methods are studied to find a suitable method for the isolation and characterisation of Ni species previously found in cytosols from normal and malignant tissues of the human colon. The total Ni concentrations of the cytosols were determined as well as the total protein content. Thus, a Ni-containing protein could be isolated from cytosols of malignant human colonic tissues using size-exclusion chromatography with ICP-MS for element-specific detection. Ni-containing species in the molecular mass range from 10,000 to 20,000 Da were found and pre-concentrated. The determination of the molecular mass of the species was performed through online coupling of reversed-phase chromatography with electrospray ionisation quadrupole time-of-flight MS. Using identical chromatographic conditions and ICP-MS the detected protein was shown to contain Ni.