A novel polymeric membrane electrode for the potentiometric analysis of Cu in drinking water

Based on a novel ionophore, an ion-selective electrode has been developed for the determination of Cu²⁺ in drinking water. Its selectivity behavior is characterized and its lower detection limit optimized for measurements with different electrolyte backgrounds. The lower detection limit was 2 × 10⁻⁹ M Cu²⁺ for samples with low ionic background and 1 × 10⁻⁷ M Cu²⁺ with ionic background typically found in drinking water.     

Uranium analysis by K X-rays from geological samples

Uranium analysis at trace levels from geological samples was performed by K X-ray fluorescence using a semiconductor detector and radioisotope excitation. The exciting⁵⁷Co-source was constructed in such a way as to produce a high peak to background ratio. Using 10 minutes counting times the detection limit with a 0.26 GBq source was 24 μg/g improving to about 9 μg/g with a ten times stronger source. The detection limits for tin, cerium, tungsten and thorium were also measured.     

Simultaneous voltammetric determination of dihydroxybenzene isomers using a poly(acid chrome blue K)/carbon nanotube composite electrode

A novel modified electrode was fabricated by electropolymerization of acid chrome blue K at a multi-walled carbon nanotubes modified glassy carbon electrode. The electrode developed was used for simultaneous determination of the isomers of dihydroxybenzene in environmental samples using first order linear sweep derivative voltammetry with background subtraction. A linear relationship between peak current and concentration of hydroquinone, catechol and resorcinol was obtained in the range of 1 × 10⁻⁶–1 × 10⁻⁴ mol L⁻¹, and the detection limits were estimated to be 1 × 10⁻⁷, 1 × 10⁻⁷ and 9 × 10⁻⁸ mol L⁻¹, respectively. The constructed electrode showed excellent reproducibility and stability. Real water samples were analyzed and satisfactory results were obtained. This method provides a new way of constructing electrodes for environmental and biological analysis.     

Separation of Organomercury Species Using Nonaqueous Capillary Electrophoresis Coupled with Sample Stacking and Electrokinetic Injection Techniques

A nonaqueous capillary electrophoresis (NACE) method, 30 mM ammonium acetate in methanol as background electrolyte (BGE), was developed for separation of the organomercury species without complexing reagents. The effects of different solutes and solvents in BGE were studied. Three species of organomercury, methylmercury, ethylmercury and phenylmercury, were separated well and all the number of theoretical plates were over 10⁶. The present NACE method was also coupled with sample stacking and electrokinetic injection techniques to enhance the detection sensitivity. Under the optimum conditions, the limit of detection (S/N = 3) is 18 ng mL⁻¹ and the linear relation range from 40 to 750 ng mL⁻¹ were obtained for methylmercury.     

Sol particle immunoassays using colloidal gold and neutron activation

The feasibility of performing immunoassays with colloidal gold labels and detection of¹⁹⁸Au by neutron activation has been demonstrated with measurements of human immunoglobulin and of serum antibodies to human immunodeficiency virus type 1. The detection sensitivity achieved after activation in a high flux reactor or with a water moderated²⁵²Cf source, by gamma-counting or by autoradiography, is similar to the sensitivity obtained with absorbance measurements in the more common enzyme immunoassays. The reactor based neutron activation assay allows detection of 10^–16 mol of analyte in routine operation with possible extension to 10^–20 mol. The sensitivity with the 1.3 Ci²⁵²Cf source is limited to about 10^–15 mol. The practical limitations of the assay's sensitivity at this point are due to background signals from reagents and/or nonspecific binding of the gold labeled reagent.     

Quantification of biogenic amines by microchip electrophoresis with chemiluminescence detection

A highly sensitive microchip electrophoresis (MCE) method with chemiluminescence (CL) detection was developed for the determination of biogenic amines including agmatine (Agm), epinephrine (E), dopamine (DA), tyramine, and histamine in human urine samples. To achieve a high assay sensitivity, the targeted analytes were pre-column labeled by a CL tagging reagent, N-(4-aminobutyl)-N-ethylisoluminol (ABEI). ABEI-tagged biogenic amines after MCE separation reacted with hydrogen peroxide in the presence of horseradish peroxidase (HRP), producing CL emission. Since no CL reagent was added to the running buffer, the background of the CL detection was extremely low, resulting in a significant improvement in detection sensitivity. Detection limits (S/N = 3) were in the range from 5.9 × 10⁻⁸ to 7.7 × 10⁻⁸ M for the biogenic amines tested, which were at least 10 times lower than those of the MCE–CL methods previously reported. Separation of a urine sample on a 7 cm glass/poly(dimethylsiloxane) (PDMS) microchip channel was completed within 3 min. Analysis of human urine samples found that the levels of Agm, E and DA were in the ranges of 2.61 × 10⁻⁷ to 4.30 × 10⁻⁷ M, 0.81 × 10⁻⁷ to 1.12 × 10⁻⁷ M, and 8.76 × 10⁻⁷ to 11.21 × 10⁻⁷ M (n = 4), respectively.     

高精度四极质谱检测限测试和影响因素分析

高精度四极质谱仪(QMS)的气体分压精确测量功能与其使用方法关系密切.采用包含有四极质谱仪、真空系统和进样系统的质谱参数测试装置,针对工作及系统参数对质谱测试结果的影响开展研究.试验结果表明:无论是扫描速率、质量数分辨率、电压和探测器等质谱工作参数,还是真空本底、工作真空和气体种类等系统参数都会对质谱测试结果尤其检测限产生一定影响.试验获得了特定条件下的最优参数并进行比较.采用获得的最优参数组合,通过测量空气中极低含量稀有氪气和氙气的同位素谱图,可获得一定条件下法拉第杯(FC)、二次电子倍增器(SEM)和离子计数器(CP)等3种探测器的最小可检浓度,分别为17.3×10-9、0.34×10-9和0.15×10-9.其中SEM和CP的检测限最低,适合用于微量气体分析.     

Indirect conductimetric detection of cyclodextrins in liquid chromatography

Indirect conductimetric detection of cyclodextrins (CDs) was investigated in liquid chromatography (LC). The mobile phase contained an electrolytic substance which maintained high background, and CDs were indirectly detected owing to a depression of the background signal due to dilution of the mobile phase by the analyte molecules. The dynamic reserve, defined as the ratio of the background to its noise level, was (1–2) × 10⁵, and the detection limits at S/N = 3 were 23–40 ng for CDs when a microcolumn LC system was employed.     

Analysis of amino acid neurotransmitters by capillary electrophoresis and laser-induced fluorescence using a new fluorescein-derived label

A capillary electrophoresis laser-induced fluorescence detection method (CE-LIF) was developed for the separation of eight neurotransmitters tagged on their amino function with 6-oxy-(N-succinimidyl acetate)-9-(2′-methoxycarbonyl) fluorescein (SAMF), a new fluorescent reagent synthesized in our lab. Derivatization was performed in boric acid buffer (pH = 7.75) at 37 °C over 15 min. The pH-independent fluorescence of SAMF (pH 4–9) permits background buffers over a wide range of pH. It was demonstrated that an acidic running buffer offers a better resolution compared to basic medium in terms of resolution and peak shapes. Employing Cu²⁺ as the additive, the molecules were baseline-separated using a running buffer consisting of 40 mM sodium acetate and 2 mM Cu²⁺ (pH 6.0). The detection limits ranged from 1 to 2 × 10⁻¹⁰ M. The method has been validated for the characterization of lymphocyte samples. The results obtained illustrate the advantages of combining SAMF derivatization with CE-LIF for determining neurotransmitters.     

Detection of paracetamol by capillary electrophoresis with chemiluminescence detection

Indirect detection of paracetamol was accomplished using a capillary electrophoresis-chemiluminescence (CE-CL) detection system, which was based on its inhibitory effect on a luminol-potassium hexacyanoferrate(III) (K₃[Fe(CN)₆]) CL reaction. Paracetamol migrated in the separation capillary, where it mixed with luminol included in the running buffer. The separation capillary outlet was inserted into the reaction capillary to reach the detection window. A four-way plexiglass joint held the separation capillary and the reaction capillary in place. K₃[Fe(CN)₆] solution was siphoned into a tee and flowed down to the detection window. CL was observed at the tip of the separation capillary outlet. The CL reaction of K₃[Fe(CN)₆] oxidized luminol was employed to provide the high and constant background. Since paracetamol inhibits the CL reaction, an inverted paracetamol peak can be detected, and the degree of CL suppression is proportional to the paracetamol concentration. Maximum CL signal was observed with an electrophoretic buffer of 30 mM sodium borate (pH 9.4) containing 0.5 mM luminol and an oxidizer solution of 0.8 mM K₃[Fe(CN)₆] in 100 mM NaOH solution. Under the optimal conditions, a linear range from 6.6 × 10⁻¹⁰ to 6.6 × 10⁻⁸ M (r = 0.9999), and a detection limit of 5.6 × 10⁻¹⁰ M (signal-to-noise ratio = 3) for paracetamol were achieved. The relative standard deviation (R.S.D.) of the peak area for 5.0 × 10⁻⁹ M of paracetamol (n = 11) was 2.9%. The applicability of the method for the analysis of pharmaceutical and biological samples was examined.     

The determination of calcium in yttrium oxide by alpha-particle activation analysis

The determination of calcium in yttrium oxide through the⁴⁰Ca(α, p)⁴³Sc reaction was studied, using a post-irradiation radiochemical separation procedure. The half-life of⁴³Sc was determined to be 3.87 hr. The chemical recovery was about 70%. The detection limit was about 10 ppb, for a 30 min irradiation at an alpha-particle beam current of 1 μA (E_α=13.4 MeV) and γ−γ coincidence counting (background counts being<1, cpm), with counting starting at 4 hours after the end of irradiation. Four samples of a batch of yttrium oxide (A.R.) were analyzed, and found to contain 13.9±1.0 ppm of calcium.     

Trace metal analysis on hafnium silicate deposited Si wafer by Total Reflection X-ray Fluorescence

Hafnium silicate is a so-called high-k material, which is a new key material in the semiconductor field. This material is difficult to analyze by a conventional W-Lβ1TXRF source due to the high background originating from Hf-Lα lines. In this paper, the capability of Ir source TXRF analysis on hafnium silicate films is investigated with intentional contamination of Ti, Cr, Fe, Ni and Cu elements. The spectral fitting is discussed where X-ray resonant Raman scattering and escape peak of Ir-Lα overlap with Ni-Kα peak. The detection limits are estimated to 0.9 × 10¹⁰ to 2 × 10¹⁰ atoms/cm² for the transition metals.     

Carbon dots as a fluorescent probe for label-free detection of physiological potassium level in human serum and red blood cells

A unique photoluminescence carbon dots (CDs) with larger size were prepared by microwave-assisted method. Complex functional groups on the surface of the CDs facilitate the nanoparticles to form affinity with some metal ions. Taking advantage of the effective fluorescence quenching effect of K⁺, a highly sensitive CD-based fluorescence analytical system for label-free detection of K⁺ with limit of detection (LOD) 1.0 × 10⁻¹² M was established. The concentrations of potassium ion in biological samples such as human serum are usually found at millimolar levels or even higher. The proposed method begins with a substantial dilution of the sample to place the K⁺ concentration in the dynamic range for quantification, which covers 3 orders of magnitude. This offers some advantages: the detection of K⁺ only needs very small quantities of biological samples, and the dilution of samples such as serum may effectively eliminate the potential interferences that often originate from the background matrix. The determined potassium levels were satisfactory and closely comparable with the results given by the hospital, indicating that this fluorescent probe is applicable to detection of physiological potassium level with high accuracy. Compared with other relative biosensors requiring modified design, bio-molecular modification or/and sophisticated instruments, this CD-based sensor is very simple, cost-effective and easy detection, suggesting great potential applications for successively monitoring physiological potassium level and the change in biological system.     

Pharmaceutical formulation analysis of thalidomide by solid surface room temperature phosphorimetry

A rapid and simple method of analysis for thalidomide formulations has been reported based on solid surface room temperature phosphorimetry. Thalidomide phosphorescence was enhanced by Hg(II) ions deposited on paper substrates previously treated for background reduction. A calibration curve with a linear dynamic range of three orders of magnitude was obtained (1.37 × 10^–6 M – 10^–3 M) and a 1.8 ng absolute limit of detection was estimated. The recovery of the method was tested in pharmaceutical formulations containing thalidomide as the only active ingredient. The values obtained were 96.3 ± 6.6% (employing the calibration curve procedure) and 98.0 ± 5.3% (employing the standard addition procedure), which show the potential of the technique for the analysis of thalidomide in dosage forms.     

Determination of 234U/238U isotope ratios in environmental waters by quadrupole ICP-MS after U stripping from alpha-spectrometry counting sources

The ²³⁴U/²³⁸U isotope ratio has been widely used as a tracer for geochemical processes in underground aquifers. Quadrupole-based inductively coupled plasma mass spectrometry (ICP-MS) equipped with a high-efficiency nebulizer and a membrane desolvator was employed for the determination of ²³⁴U/²³⁸U isotope ratios in natural water samples. The instrumental limit of detection for ²³⁴U was at the low pg L⁻¹ level with very low sample consumption. Measurement precision (²³⁴U/²³⁸U) was 3–5% for bottled mineral water with elevated uranium concentration (>1 μg L⁻¹). For the analysis of groundwater samples from the Almonte-Marisma underground aquifer (Huelva, Spain), uranium was stripped from stainless steel planchets that had previously been used as radiometric counting sources for alpha-particle spectrometry. Potential spectral interferences from other metals introduced during the dissolution were investigated. Matrix-matched blank solutions were needed to subtract the background on ²³⁴U due to the formation of platinum argides, and to allow for mass bias correction and background correction. The Pt appears to be an impurity present in the stainless steel, either as a minor component by itself or after extraction from the anode and a subsequent uranium electrodeposition. The ²³⁴U/²³⁸U isotope ratio data were in very good agreement with those of alpha spectrometry, while precision was improved by a factor of up to 10 and counting time was reduced down to ~20 min (10 replicate measurements).     

The determination of lansoprazole in pharmaceutical preparation by capillary electrophoresis

Summary A capillary electrophoretic method for the determination of lansoprazole in pharmaceutical preparations is described. The analysis was performed in a fused silica capillary using 20 mM borate buffer at pH 8.7 as a background electrolyte. The best resolution was obtained by applying a potential of 30 kV and vacuum injection of 1 s. Detection was made at 200 nm. Phenobarbital sodium was a good internal standard and the migration times were 4.1±0.2 min (lansoprazole) and 5.7±0.2 min (phenobarbital sodium). A well-correlated calibration equation was found in the range of 1.12×10⁻⁵ and 2.24×10⁻⁴ M. Limit of detection (LOD) and limit of quantitation (LOQ) were 1.4×10⁻⁶ M (RSD 1.44%) and 4.42×10⁻⁶ M (RSD 1.49%), respectively. The method was validated and applied to the capsules containing enteric coated pellets of lansoprazole. The results of the proposed method were compared those of UV spectrophotometry. Insignificant differences were found between the two methods at the 95% probability level. The described CE method is selective, rapid, sensitive and accurate for the analysis of lansoprazole in quality control laboratories.     

A sensitive enzymatic method for paraoxon detection based on enzyme inhibition and fluorescence quenching

A sensitive and selective method for the paraoxon detection based on enzyme inhibition and fluorescence quenching was presented in this study. Under the catalytic effect of acetylcholinesterase (AChE), acetylthiocholine (ATCh) hydrolysis released thiocholine (TCh) which could react with N-(7-dimethylamino-4-methylcoumarin-3-yl) maleimide (DACM) to produce a blue fluorescence compound. Subsequently, AChE catalytic activity was inhibited with the addition of paraoxon, which caused TCh decreased, leading to a significant decrease of the blue fluorescent compound. Meanwhile, p-nitrophenol, the hydrolysis product of paraoxon, would lead to a quenching of the fluorescence. Therefore, fluorescence intensity of the system would decrease dramatically by a combined effect of enzyme inhibition and fluorescence quenching. Under optimal experimental conditions, an excellent linear relationship between the decrease of fluorescence intensity and paraoxon concentration over the range from 5.5 × 10⁻¹² to 1.8 × 10⁻¹⁰ mol L⁻¹ was obtained. Fluorescence background caused by nonenzymatic hydrolysis of ATCh or other matters was relatively low, the proposed approach offered adequate sensitivity for the detection of paraoxon at 3.5 × 10⁻¹² mol L⁻¹.     

On the determination of trace impurities in carbon concentrates used in the spectrochemical analysis of extra-pure substances

The effects of concentration of NaCl, employed as the carrier substance in a carbon collector, on line excitation conditions for trace impurities and on other factors which determine detection limita in spectrochemical analysis with a d.c. arc have been studied. It was shown that over the range 4–0.5 per cent NaCl the change in excitation conditions has but a slight effect on the intensity of spectral lines. The major role in the marked lowering of detection limits for trace impurities (Ag, Be, Bi, Cd, Cu, Ga, Ge, In, Mn, Zn, down to n × 10⁻¹⁰ g; Au, Ba, Co, Cr, Ni, Pb, Sb, Sn, Tl—to n × 10⁻⁹ g and for As, B, Pt, Te—n × 10⁻⁸ g) is played by a decline in background intensity and a better coefficient of vapour utilization. For some trace impurities this limit may be improved still further by re-shaping the upper electrode.     

Determination of glucose and ethanol after enzymatic hydrolysis and fermentation of biomass using Raman spectroscopy

Raman spectroscopy has been used for the quantitative determination of the conversion efficiency at each step in the production of ethanol from biomass. The method requires little sample preparation; therefore, it is suitable for screening large numbers of biomass samples and reaction conditions in a complex sample matrix. Dilute acid or ammonia-pretreated corn stover was used as a model biomass for these studies. Ammonia pretreatment was suitable for subsequent measurements with Raman spectroscopy, but dilute acid-pretreated corn stover generated a large background signal that surpassed the Raman signal. The background signal is attributed to lignin, which remains in the plant tissue after dilute acid pretreatment. A commercial enzyme mixture was used for the enzymatic hydrolysis of corn stover, and glucose levels were measured with a dispersive 785 nm Raman spectrometer. The glucose detection limit in hydrolysis liquor by Raman spectroscopy was 8 g L⁻¹. The mean hydrolysis efficiency for three replicate measurements obtained with Raman spectroscopy (86 ± 4%) was compared to the result obtained using an enzymatic reaction with UV-vis spectrophotometry detection (78 ± 8%). The results indicate good accuracy, as determined using a Student's t-test, and better precision for the Raman spectroscopy measurement relative to the enzymatic detection assay. The detection of glucose in hydrolysis broth by Raman spectroscopy showed no spectral interference, provided the sample was filtered to remove insoluble cellulose prior to analysis. The hydrolysate was further subjected to fermentation to yield ethanol. The detection limit for ethanol in fermentation broth by Raman spectroscopy was found to be 6 g L⁻¹. Comparison of the fermentation efficiencies measured by Raman spectroscopy (80 ± 10%) and gas chromatrography-mass spectrometry (87 ± 9%) were statistically the same. The work demonstrates the utility of Raman spectroscopy for screening the entire conversion process to generate lignocellulosic ethanol.     

New adsorptive square wave method for trace determination of prilocain in the flow injection system by a fast fourier analysis

The determination of prilocain, used to manage tonic-clonic seizures, has been carried out at micro gold electrode (Au UME) using continuous fast Fourier transform square wave voltammetry. The Au UME electrode exhibited an effective response towards prilocaine adsorption. The peak current was also found to be significantly increased. The determination was carried out in phosphate containing electrolyte in the pH of 2.0 and a well-defined change on the peak current were noticed. The peak current was found to be linearly dependent on concentration of prilocain in the concentration range 5.0 × 10⁻⁷–1.0 × 10⁻¹¹ M with a detection limit of 5.0 × 10⁻¹² M. This paper describes development of a new analysis system to determine of prilocain by a novel square wave voltammetry method to perform a very sensitive method. The method used for determination of prilocain by measuring the changes in admittance voltammogram of a gold ultramicroelectrode (in 0.05 M H₃PO₄ solution) caused by adsorption of the prilocain on the electrode surface. Variation of admittance in the detection process is created by inhibition of oxidation reaction of the electrode surface, by adsorbed of prilocain. Furthermore, signal-to-noise ratio has significantly increased by application of discrete Fast Fourier Transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as SW frequency, eluent pH, and accumulation time were optimized. The relative standard deviation at concentration 5.0 × 10⁻⁸ M is 5.8% for 5 reported measurements.