Controlled formation of polyamine crystalline layers on glass surfaces and successive fabrication of hierarchically structured silica thin films

The formation of silica films on the glass plate whose surface was precoated by crystalline linear poly(ethylenimine) (LPEI) in advance was systematically investigated via controlling the surface-specific crystallization of the LPEI on the glass plate. Immersing glass substrates into a hot aqueous solution of LPEI containing additives such as transition metal ions and acidic compounds and retaining them on 30 °C for desired periods resulted in the formation of crystalline LPEI layers on the substrates. Subsequently dipping this LPEI-coated glass into silica source solutions afforded successfully hierarchically structured silica film which coated continuously the surface of the substrates. In this two-step process, we found that the formation of hierarchically structured silica films strongly depended on the LPEI layer formed from the LPEI aqueous solutions containing different additives. The LPEI layer formed by changing the kinds of additives and their concentrations provides the differently structured silica films composed of turbine-like structures flatly lying-on and/or vertically standing-on as well as ribbon network structures on the surface of the substrates. Moreover, we functionalized these silica films by the introduction of hydrophobic alkyl chains or emissive Eu(III) complexes and investigated their wettability and emission properties.     

Thin film formation of silica nanoparticle/lipid composite films at the fluid-fluid interface

We report a new and simple method for the formation of thin films at the interface between aqueous silica Ludox dispersions and lipid solutions in decane. The lipids used are stearic acid, stearyl amine, and stearyl alcohol alongside silica Ludox nanoparticle dispersions of varying pH. At basic pH thin films consisting of a mixture of stearic acid and silica nanoparticles precipitate at the interface. At acidic and neutral pH we were able to produce thin films consisting of stearyl amine and silica particles. The film growth was studied in situ with interfacial shear rheology. In addition to that, surface pressure isotherm and dynamic light scattering experiments were performed. The films all exhibit strong dynamic rheological moduli, rendering them an interesting material for applications such as capsule formation, surface coating, or as functional membranes.     

Reactive layer-by-layer films from solutions containing silicic acid and a Ti(IV) complex: preferential incorporation of silica and interactions of the obtained films with hexacyanoferrate anions

The concept of reactive layer-by-layer (LBL) deposition allows the build-up of films containing polycations and oxide particles, namely, silica and poorly crystalline anatase. Because polyelectrolyte multilayer films have been produced from blended polyanions or polycations solutions and since preferential incorporation of one of the partners of the blend has been found in most cases, one should wonder if a preferential polycondensation of either silica or titania should occur when the reactive deposition is performed from a solution containing a precursor of both inorganic species. X-ray photoelectron (XPS) and UV-visible spectroscopies show that the reactive LBL films made from the blend and poly(diallyldimethylammonium chloride) (PDADMAC) incorporate predominantly silica over TiO(2) over the whole molar fraction range of the silicic acic/hydrosoluble Ti(IV) complex. The transparency of the films below 365 nm, corresponding to the band edge of TiO(2), can easily be modulated. The silica/TiO(2) films are all able to bind hexacyanoferrate owing to the presence of the polycation allowing the binding of the oxide particles to the substrate. However, the binding capacity of the film does not scale proportionally to its thickness. The films made from eight dipping cycles showed a sudden decrease in their binding capacity for hexacyanoferrate when the molar fraction of the titanium complex was higher than ～0.6 in the blend. For the same films, electrochemical impedance spectra (EIS) showed marked differences with a change in film composition: the more TiO(2) in the film, the higher the resistance to electron and to mass transfer. Therefore, EIS helps to explain the reduced surface concentration measured by means of cyclic voltammetry for films rich in TiO(2).     

Aqueous dip-coating route to dense and porous silica thin films using silica nanocolloids with an aid of polyvinylpyrrolidone

An aqueous dip-coating route without using volatile alcohols for preparing dense and porous silica thin films is presented. The films were prepared by dip-coating on Si(100) and silica glass substrates using aqueous suspension of 8–11 nm colloidal silica where no alcohols were added. The addition of polyvinylpyrrolidone (PVP) in the suspension greatly improved the wettability, allowing homogeneous films to be formed on the substrates while the substrates showed poor wettability without PVP. When the as-deposited films were fired at 500–1,000 °C, optically transparent porous films with smooth surface were obtained. The porous films had homogeneous distribution and packing of silica nanoparticles, refractive indices of 1.24–1.33, and pencil hardness lower than 6B. The porous films underwent significant densification by viscous sintering when fired at temperatures over 1,000 °C. The viscous sintering was accompanied by the progress of condensation reaction and by the structural relaxation of siloxane network, which was revealed in the infrared absorption spectra. The resulting dense films had optical transparency, smooth surface, pencil hardness over 9H and refractive indices close to that of silica glass.     

Preparation and properties of poly(vinyl alcohol)/silica nanocomposites derived from copolymerization of vinyl silica nanoparticles and vinyl acetate

Nanocomposites of poly(vinyl alcohol)/silica nanoparticles (PVA-SNs) were prepared by in-situ radical copolymerization of vinyl silica nanoparticles functionalized by vinyltriethoxysilane (VTEOS) and vinyl acetate with benzoyl peroxide (BPO, i.e., initiator), subsequently saponified via direct hydrolysis with NaOH solution. The resulting vinyl silica nanoparticles, PVA-SNs were characterized by means of fourier transformation spectroscopy (FTIR), transmission electron microscopy (TEM) and the elemental analysis method. Effects of silica nanoparticles on viscosity and alcoholysis of PVA-SNs were studied by a ubbelohode capillary viscometer and the back titration method. The morphological structure of PVA-SN films was investigated by scanning electron microscopy (SEM). Differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and tensile test were used to determine the thermal and mechanical properties of PVA-SN films. The results indicated that the content of vinyl groups on the surface of the vinyl silica nanoparticles was up to 3.02 mmol/g and vinyl silica nanoparticles had been successfully copolymerized with vinyl acetate. Furthermore, compared to pure PVA, silica nanoparticles bonded with polymer matrix in a low concentration affected the viscosity and alcoholysis of the PVA-SNs materials. At the same time, it resulted in the improvement of the thermal and mechanical properties of the PVA-SN materials due to a strong interaction between silica nanoparticles and the polymer matrix via a covalent bond. It could be found that the optical clarity of the membrane was changed through UV-Vis absorption spectrum due to the introduction of silica nanoparticles.     

Formation and surface properties of raspberry-like silica particles: effect of molecular weight of the coating poly(methacrylic acid) brushes

In this work, silica particles were firstly modified with poly(methyl methacrylate) and then converted to poly(methacrylic acid) (PMAA). The PMAA brushes with different molecular weight were used to modify the seed particles and learn the formation process of the raspberry-like particles. Silica particles with core–shell structure were obtained when the silica seed particles were modified only with carboxyl functional groups. With the increase of the molecular weight of PMAA brushes, uniform raspberry-like silica particles appeared gradually. But when the molecular weight of PMAA brushes was above 136,100, the morphologies became complicated. The electric charge of the polymer brushes was also found to have influence on the final morphologies of the particles. The contact angle (CA) tests showed that films composed of nanoparticles with uniform raspberry-like structures had an average CA of 157.2°, which indicated great prospects in the super-hydrophobic applications.     

Spontaneous wrinkling of layer-by-layer assembled polyelectrolyte films for humidity-responsive superhydrophobicity

The fabrication of smart films with reversible wettability enabled by the stimulus-induced morphology changes has attracted growing interest but remains a challenge. Here we report a smart film that can reversibly changes its wettability between transparent hydrophobicity to translucent superhydrophobicity through the humidity-induced wrinkling/de-wrinkling process. The film was fabricated by depositing hydrophobic SiO₂ nanoparticles (NPs) on poly(acrylic acid) (PAA)/poly(allylamine hydrochloride) (PAH) films, followed by partially exfoliating the films from the underlying substrates. The partially exfoliated PAA/PAH film can reversibly wrinkle and de-wrinkle when being alternately subjected to humid and dry environments. The deposition of hydrophobic SiO₂ NPs on the wrinkling PAA/PAH film does not hinder the humidity-enabled wrin-kling/de-wrinkling ability of the composite film. The hydrophobic SiO₂ NPs and the underlying humidity-wrinkling PAA/PAH film enable the composite film to spontaneously change from hydrophobic and transparent to superhydrophobic and translucent with the rise of environmental humidity.     

Nonstoichiometric interpolyelectrolyte complexes as colloidal dispersions based on NaPAMPS and their interaction with colloidal silica particles

Preparation and characterization of some nonstoichiometric interpolyelectrolyte complexes (NIPECs) as stable colloidal dispersions by the interaction between poly(sodium 2-acrylamido-2-methylpropanesulfonate) (NaPAMPS) and three strong polycations bearing quaternary ammonium salt centres in the backbone, poly(diallyldimethylammonium chloride) (PDADMAC) and two polycations containing N,N-dimethyl-2-hydroxypropyleneammonium chloride units (PCA₅ and PCA₅D₁), have been followed in this study as a function of the polycation structure and polyelectrolyte concentration. Complex characteristics were followed by polyelectrolyte titration, turbidity and quasi-ellastic light scattering. Almost monodisperse NIPECs nanoparticles with a good storage stability were prepared when total concentration of polyelectrolyte was varied in the range 0.85-6.35 mmol/L, at a ratio between charges (n⁻/n⁺) of 0.7. NIPECs as a new kind of flocculants were used to flocculate a stable monodisperse silica suspension. The main advantage of NIPECs as flocculants is the broad flocculation window, which is a very important aspect for industrial applications.     

Nanoparticles of varying hydrophobicity at the emulsion droplet-water interface: adsorption and coalescence stability

The coalescence stability of poly(dimethylsiloxane) emulsion droplets in the presence of silica nanoparticles ( approximately 50 nm) of varying contact angles has been investigated. Nanoparticle adsorption isotherms were determined by depletion from solution. The coalescence kinetics (determined under coagulation conditions at high salt concentration) and the physical structure of coalesced droplets were determined from optical microscopy. Fully hydrated silica nanoparticles adsorb with low affinity, reaching a maximum surface coverage that corresponds to a close packed monolayer, based on the effective particle radius and controlled by the salt concentration. Adsorbed layers of hydrophilic nanoparticles introduce a barrier to coalescence of approximately 1 kT, only slightly reduce the coalescence kinetics, and form kinetically unstable networks at high salt concentrations. Chemically hydrophobized silica nanoparticles, over a wide range of contact angles (25 to >90 degrees ), adsorb at the droplet interface with high affinity and to coverages equivalent to close-packed multilayers. Adsorption isotherms are independent of the contact angle, suggesting that hydrophobic attraction overcomes electrostatic repulsion in all cases. The highly structured and rigid adsorbed layers significantly reduce coalescence kinetics: at or above monolayer surface coverage, stable flocculated networks of droplets form and, regardless of their wettability, particles are not detached from the interface during coalescence. At sub-monolayer nanoparticle coverages, limited coalescence is observed and interfacial saturation restricts the droplet size increase. When the nanoparticle interfacial coverage is >0.7 and <1.0, mesophase-like microstructures have been noted, the physical form and stability of which depends on the contact angle. Adsorbed nanoparticle layers at monolayer coverage and composed of a mixture of nanoparticles with different hydrophobisation levels form stable networks of droplets, whereas mixtures of hydrophobized and hydrophilic nanoparticles do not effectively stabilize emulsion droplets.     

Bioassisted synthesis of catalytic gold/silica nanotubes using layer-by-layer assembled polypeptide templates

We report the bioassisted synthesis of gold nanoparticle/silica (Au NP/silica) tubes using layer-by-layer (LBL) assembled poly(L-lysine)/poly(L-tyrosine) (PLL/PLT) multilayer films deposited on the polycarbonate (PC) membrane pores as both mediating agents and templates. The novelty of this approach is the in situ synthesis of Au NP/silica tubes using PLL/PLT multilayer films for sequential growth of Au NPs and silicas. The experimental data revealed that the buildup of the LBL multilayer films was mainly driven by the formation of hydrogen bond and the polypeptide macromolecular assemblies adopted mainly β-sheet conformation. The as-prepared Au NP/silica tubes possessed promising catalytic activity toward the reduction of p-nitrophenol. The synthesis conditions such as the concentration of gold precursor and polypeptide molecular weight were found to influence the gold weight ratio and particle size in the tubes and the catalytic properties of the Au NP/silica tubes. This approach provides a facile, robust, and green method to obtain nonaggregated metal nanoparticles immobilized in porous oxide network at ambient conditions. Using the synergy between biomimetic or bioassisted synthesis of nanostructured materials and LbL assembly technique, a variety of structures such as films, tubes, and capsules comprising of multiple compositions can be obtained.     

Influence of polymeric additives on biomimetic silica deposition on patterned microstructures

Microstructured polymer films prepared by photochemical grafting of different polymers were used as restricted reaction areas in silica deposition experiments. Linear and branched poly(alkyleneimines) and poly(allylamine hydrochloride) in pure aqueous or phosphate-containing solutions were used as additives to silica precursor solutions. The silica deposits obtained by spin-coating these solutions onto microstructured polymer films were investigated by scanning electron microscopy and atomic force microscopy. Experiments with poly(alkylene imines) in the silica precursor solution show the deposition of smooth and granular silica structures that closely mimic the natural patterns. The structure formation can be explained by physicochemical processes. Hypotheses that have been made for the natural silification processes can be evaluated on this basis.     

Control over the Wettability of Colloidal Crystal Films by Assembly Temperature

Summary: A facile method to fabricate colloidal crystal films with tunable wettability from an amphiphilic material polystyrene‐block‐poly(methyl methacrylate)‐block‐poly(acrylic acid) is presented. The wettability of the film can be tuned from superhydrophilic (CA, 0°) to superhydrophobic (CA, 150.2°) by varying the assembly temperature, while the position of the photonic bandgap of the colloidal crystal films remains virtually unchanged. The method could open new application fields of colloidal crystals in diverse environments.

The relationship of assembly temperature with water CA (inset is the water droplet profile of the relative water CA).     

A new kind of polyion complex nanoparticles and the covalent drug-loading pattern for doxorubicin and pH-controlled release

The one-pot synthesis method was developed for the preparation of complex nanoparticles with a narrow size distribution and stable morphology. The vinyl monomers of (2-dimethylamino)ethyl methacrylate (DEMA) and diacetone acrylamide (DAA) were copolymerized in the presence of alginic acid in an aqueous solution without any organic solvents or surfactants, yielding stable complex nanoparticles in one-pot synthesis. The nanoparticle was composed of the complex of poly(DEMA-co-DAA) and alginic acid. The complex was formed via electrostatic interaction between polycations of DEMA and polyanions of alginate. The residual alginate segment around the core formed the shell of the nanoparticles. The average diameter of the nanoparticles varied from 120 to 213 nm when the molar percentage of DAA changed from 0.5 to 0 with respect to DEMA. The anti-cancer drug doxorubicin could be loaded onto the nanoparticles with a high-loading efficiency through the formation of polymer–drug conjugate. The drug release could be controlled by adjusting the pH value of the medium.     

Suppression of surface pattern formation in spin‐coated polymer films by the addition of polydimethylsiloxane‐grafted silica nanoparticles

Polydimethylsiloxane (PDMS)‐grafted nanoparticles and PDMS were added, respectively, to inhibit the dewetting of polymer films and the formation of surface patterns in spin coating. Uniform and flat films were successfully achieved with the addition of PDMS‐grafted silica nanoparticles or PDMS. Time‐of‐flight secondary ion mass spectrometry depth profiling indicated that PDMS‐grafted silica nanoparticles and PDMS preferentially segregated to the surface. A high concentration of bromine end groups was observed at the interface. The surface layer of PDMS or PDMS‐grafted silica nanoparticles can decrease the surface tension of the polymer solutions and reduce the evaporation rates of the solvents, providing more time for the bromine end groups to anchor themselves at the silicon substrates. Copyright © 2016 John Wiley & Sons, Ltd.     

Silver nanocomposite layer-by-layer films based on assembled polyelectrolyte/dendrimer

Silver nanocomposite multilayer films were prepared through the in situ method. Multilayer thin films, prepared through the sequential electrostatic deposition of a positively charged third-generation poly(amidoamine) dendrimer (PAMAM) and negatively charged poly(styrenesulfonate) (PSS) and poly(acrylic acid) (PAA), were utilized as nanoreactors for the formation of silver nanoparticles. The silver ions were preorganized in layer-by-layer (LBL) films composed of PAMAM dendrimers and subsequently reduced with hydrogen to prepare the silver nanoparticles. The UV-vis spectrum and profilometer were used to characterize the regular growth of bilayers. UV-vis absorption from plasmon resonance at 435 nm and TEM images indicated the formation of the silver nanoparticles in the multilayer films. The silver nanocomposite LBL films were also constructed on the indium tin oxide-glass and investigated using cyclic voltammetry. The silver nanoparticles in the multilayer films have a stronger negative redox potential. The silver nanocomposite LBL films may have a potential application in the catalysis of reduction of 4-nitrophenol with sodium borohydride.     

Preparation and properties of biocompatible polymer-grafted silica nanoparticle

Grafting of biocompatible polymer onto the surface of silica nanoparticles was achieved by radical graft polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC), initiated by azo groups previously introduced onto the surface or by a system consisting of Mo(CO)₆ and trichloroacetyl groups on the silica surface. Both of these systems have the ability to initiate graft polymerization of MPC, resulting in the formation of poly(MPC)-grafted silica, but the percentage of poly(MPC) grafting for the latter initiating system was much higher than that of the former. The amount of moisture that could be adsorbed onto the silica surface was found to increase with increasing poly(MPC) grafting. This indicates that grafting of poly(MPC) onto the silica surface markedly increases the hydrophilic nature of the surface. The contact angle of water in composites prepared from poly(vinyl alcohol) and poly(MPC)-grafted silica was found to decrease with increasing poly(MPC)-grafted silica content. When poly(MPC)-grafted silica was added to water containing a small amount of chloroform, it was found to act as stabilizer for droplets of chloroform. In addition, according to tests by the Lee-White method, poly(MPC)-grafted silica shows non-thrombogenic characteristics.     

Direct surface force measurements of polyelectrolyte multilayer films containing nanocrystalline cellulose

Polyelectrolyte multilayer films containing nanocrystalline cellulose (NCC) and poly(allylamine hydrochloride) (PAH) make up a new class of nanostructured composite with applications ranging from coatings to biomedical devices. Moreover, these materials are amenable to surface force studies using colloid-probe atomic force microscopy (CP-AFM). For electrostatically assembled films with either NCC or PAH as the outermost layer, surface morphology was investigated by AFM and wettability was examined by contact angle measurements. By varying the surrounding ionic strength and pH, the relative contributions from electrostatic, van der Waals, steric, and polymer bridging interactions were evaluated. The ionic cross-linking in these films rendered them stable under all solution conditions studied although swelling at low pH and high ionic strength was inferred. The underlying polymer layer in the multilayered film was found to dictate the dominant surface forces when polymer migration and chain extension were facilitated. The precontact normal forces between a silica probe and an NCC-capped multilayer film were monotonically repulsive at pH values where the material surfaces were similarly and fully charged. In contrast, at pH 3.5, the anionic surfaces were weakly charged but the underlying layer of cationic PAH was fully charged and attractive forces dominated due to polymer bridging from extended PAH chains. The interaction with an anionic carboxylic acid probe showed similar behavior to the silica probe; however, for a cationic amine probe with an anionic NCC-capped film, electrostatic double-layer attraction at low pH, and electrostatic double-layer repulsion at high pH, were observed. Finally, the effect of the capping layer was studied with an anionic probe, which indicated that NCC-capped films exhibited purely repulsive forces which were larger in magnitude than the combination of electrostatic double-layer attraction and steric repulsion, measured for PAH-capped films. Wherever possible, DLVO theory was used to fit the measured surface forces and apparent surface potentials and surface charge densities were calculated.     

Development of biopolymer/cellulose/silica nanostructured hybrid materials and their characterization by NMR relaxometry

The objective of this study was to investigate the preparation and properties of hybrid materials composed of poly(lactic acid) (PLA) and poly(lactic acid)/poly(lactic-co-glycolic acid) (PLA/PLGA) blends employing cellulose nanocrystals (CNCs) and/or organophilic silica (R972) as nanoparticles. The CNCs were obtained by acid hydrolysis of commercially available microcrystalline cellulose (MCC). The materials were produced in film form by solution casting. Organophilic silica was incorporated at a ratio of 3 wt.%, and CNCs were added at ratios of 3 wt.% and 5 wt.% in relation to the weight of the polymer matrix. Two series of films were obtained. The first was prepared using only PLA as the matrix, and the second was obtained using blends of PLA and PLGA. The properties of the films were evaluated by X-ray diffractometry, nuclear magnetic resonance, Fourier-transform infrared spectroscopy and measurement of mechanical properties. The results revealed that each nanoparticle, whether added individually or combined with the other type of nanoparticle, induced different final material properties. Cellulose nanocrystals can act as nucleating agents for the crystallization of PLA. There was an improvement in the mechanical performance of films with the addition of CNCs. Further, the incorporation of silica combined with CNCs resulted in the generation of films with the strongest mechanical properties. The results of this study indicate that silica decreases the surface tension between PLA-cellulose and PLA/PLGA-cellulose.     

pH-sensitive nanostructured architectures based on synthetic and/or natural weak polyelectrolytes

This study aims to evidence the influence of polyelectrolytes structure and the number of double layers on the properties of some new nanostructured architectures formed by layer-by-layer self-assembly of complementary weak polyelectrolytes on planar surfaces. For this purpose, we used chitosan and poly(allylamine hydrochloride) as polycations, and poly(acrylic acid) and poly(2-acrylamido-2-methylpropanesulfonic acid–co-acrylic acid) as polyanions. To get a direct image on the polyelectrolyte multilayers formation and properties, gravimetry, infrared spectroscopy, and atomic force microscopy have been used. The capacity of the polyions to overcompensate the complementary polyions charges, and thus to influence the swelling degree in water of thin films, was strongly influenced by the chain structure and flexibility. A special attention was paid to the responsiveness of the new composite materials to the pH of the swelling environment.     

Electroresponsive Performances of Ecoresorbable Smart Fluids Consisting of Various Plant-Derived Carrier Liquids

This paper proposes the fabrication of a new type of electrorheological (ER) fluid with ecoresorbable features as well as excellent electroresponsive performance. The proposed ER fluid consists of biocompatible Mg-doped silica/titania hollow nanoparticles (ST HNPs) suspended in vegetable oils (canola, grapeseed, olive, and soy). The effects of biodegradable plant-derived carrier liquids on the ER performance are analyzed. The polarizability and wettability of the fabricated ER fluids are studied. The high polarizability of the nanoparticles contributes to the highly electroresponsive performance by inducing electrostatic interactions between the nanoparticles under electric fields; this enables the formation of a rigid and strong fibril structure. A suitable wettability, which represents the favorable interaction between the oil and the nanoparticles, allows the nanoparticles to disperse evenly in the oil and prevents their aggregation, thereby making the formation of a rigid and strong fibrillar structure under the electric field easier.