A Bioinspired Switchable and Tunable Carbonate‐Activated Nanofluidic Diode Based on a Single Nanochannel

A smart nanofluidic diode that exhibits both ion gating and ion current rectification has been developed using a 1‐(4‐amino‐phenyl)‐2,2,2‐trifluoro‐ethanone‐functionalized, conical nanochannel in a polyimide (PI) membrane. The switch‐like property can be tuned by controlling the wettability and charge distribution with carbonate ions. Such a nanodevice is advantageous for precisely controlling conductive states with an ultrahigh gating ratio of up to 5000, and a high rectification ratio of 27. By virtue of the high selectivity and sensitivity for carbonate ions, this nanofluidic diode may find applications in carbonate or carbon dioxide detection.     

Functionalization of a poly(vinyl alcohol) in the solid state with a swelling agent by methacrylic anhydride

Poly(vinyl alcohol‐co‐vinyl acetate) was functionalized by methacrylic anhydride to introduce functional groups by a new process that consisted of modifying a polymer directly from a powder form in the solid state. To favor the diffusion of the reagents, a swelling agent composed by a mixture of ethylene carbonate and propylene carbonate was used. N‐methylimidazole was used as a basic catalyst of the esterification reaction, adjusting the reaction times. This work presents the process and the effects of the formulation on anhydride conversion. The side reactions were also determined; they all involved N‐methylimidazole. Decarboxylation reactions of the carbonates were characterized, that is, going from ethylene carbonate to ethylene glycol, which is able to react with two anhydride molecules by esterification reactions to, respectively, form 2‐hydroxyethyl 2‐methylpropenoate and ethyl 1,2‐bis(2‐methyl propenoate). The same side reactions are possible with propylene carbonate but are less reactive than the starting ethylene carbonate. Model anhydrides such as hexanoic and heptanoic anhydrides, less reactive than methacrylic anhydride, were used to characterize a new anhydride decarboxylation reaction. The homogeneity of the grafting is also discussed, especially its dependence on the polymer properties, the diffusion modes of the reagents (carbonate mixture and the anhydride), and the competition between the diffusional and chemical kinetics of methacrylic anhydride. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1618–1629, 2004     

Orthogonally functionalizable copolymers based on a novel reactive carbonate monomer

A novel N‐hydroxy succinimide‐based carbonate monomer that allows direct synthesis of polymers incorporating a reactive carbonate group in the side chain was synthesized. This new monomer was copolymerized with methyl methacrylate and poly(ethylene glycol) methylether methacrylate using free‐radical polymerization to obtain organo‐ and water‐soluble reactive copolymers. Copolymerization of the activated carbonate monomer with an azide‐containing monomer and N‐hydroxy succinimide‐containing activated ester monomer provided orthogonally functionalizable copolymers. The pendant reactive carbonate groups of the copolymers were functionalized with amines to obtain carbamates. Polymers capable of orthogonal functionalization could be selectively functionalized as desired using subsequent 1,3‐dipolar cycloaddition or amidation reactions. The novel monomer and the copolymers were characterized by ¹H‐NMR, ¹³C‐NMR, and infrared spectroscopy. The efficient stepwise orthogonal functionalization of the copolymers were examined via ¹H‐NMR spectroscopy. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

3D and Porous RGDC‐Functionalized Polyester‐Based Scaffolds as a Niche to Induce Osteogenic Differentiation of Human Bone Marrow Stem Cells

Polyester‐based scaffolds covalently functionalized with arginine‐glycine‐aspartic acid‐cysteine (RGDC) peptide sequences support the proliferation and osteogenic differentiation of stem cells. The aim is to create an optimized 3D niche to sustain human bone marrow stem cell (hBMSC) viability and osteogenic commitment, without reliance on differentiation media. Scaffolds consisting of poly(lactide‐co‐trimethylene carbonate), poly(LA‐co‐TMC), and functionalized poly(lactide) copolymers with pendant thiol groups are prepared by salt‐leaching technique. The availability of functional groups on scaffold surfaces allows for an easy and straightforward method to covalently attach RGDC peptide motifs without affecting the polymerization degree. The strategy enables the chemical binding of bioactive motifs on the surfaces of 3D scaffolds and avoids conventional methods that require harsh conditions. Gene and protein levels and mineral deposition indicate the osteogenic commitment of hBMSC cultured on the RGDC functionalized surfaces. The osteogenic commitment of hBMSC is enhanced on functionalized surfaces compared with nonfunctionalized surfaces and without supplementing media with osteogenic factors. Poly(LA‐co‐TMC) scaffolds have potential as scaffolds for osteoblast culture and bone grafts. Furthermore, these results contribute to the development of biomimetic materials and allow a deeper comprehension of the importance of RGD peptides on stem cell transition toward osteoblastic lineage.     

From hydroxyurethane methacrylates to hybrid nonisocyanate polyurethanes

New hybrid polyhydroxyurethane networks were quantitatively synthesized by radical polymerization of new hydroxyurethane methacrylate (HUMA) prepolymers. These HUMAs were synthesized in several steps. First, bis(cyclic carbonate) poly(propylene oxide) was reacted with two different diamines (ethylene diamine and 2,2′‐(ethylenedioxy)diethylamine) in excess. Then, these end‐functionalized hydroxyurethane prepolymers were converted into end‐functionalized hydroxyl prepolymers by ring opening of ethylene carbonate. Finally, a methacrylate function was grafted to the hydroxyl functions. All these steps were performed at room temperature. These prepolymers were thermally either homopolymerized or copolymerized using benzylmethacrylate or poly(ethylene oxide) bisphenol A dimethacrylate as comonomers, leading to new hybrid nonisocyanate polyurethane networks with various properties. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Self-Assembled Bimetallic Aluminum-Salen Catalyst for the Cyclic Carbonates Synthesis

Bimetallic bis-urea functionalized salen-aluminum catalysts have been developed for cyclic carbonate synthesis from epoxides and CO₂. The urea moiety provides a bimetallic scaffold through hydrogen bonding, which expedites the cyclic carbonate formation reaction under mild reaction conditions. The turnover frequency (TOF) of the bis-urea salen Al catalyst is three times higher than that of a μ-oxo-bridged catalyst, and 13 times higher than that of a monomeric salen aluminum catalyst. The bimetallic reaction pathway is suggested based on urea additive studies and kinetic studies. Additionally, the X-ray crystal structure of a bis-urea salen Ni complex supports the self-assembly of the bis-urea salen metal complex through hydrogen bonding.     

Environmentally benign synthesis of β-hydroxy sulfides using cyclic carbonates catalyzed by large-pore zeolites

Abstract

An efficient one-pot synthesis of β-hydroxy sulfides from thiophenol and cyclic carbonates catalyzed by large-pore zeolites has been reported. Reaction of thiophenol with ethylene carbonate in the presence of the Na-X zeolite catalyst gave the highest yield of 2-(phenylthio)ethanol (100%), while reaction with propylene carbonate a highest yield of regioselective product 1-(phenylthio)propan-2-ol was obtained (97%). Enantiomerically pure 1,2-propylene carbonate gave highly regioselective and stereospecific phenylthiopropanol, demonstrating that original chirality of propylene carbonate is retained. A plausible mechanism has been proposed for zeolite-catalyzed transformation involving a chemoselective nucleophilic attack of thiophenoloxide ion onto the less-substituted carbon of cyclic carbonate. The Na-X zeolite catalyst is recyclable and provides advantages of green chemistry approach to the synthesis of β-hydroxy sulfides without the use of any solvent.     

携带叠氮和氨侧基的脂肪族聚酯的合成和表征

通过丙交酯(LA)与环状碳酸酯单体共聚的方法制备了一种侧链带有溴原子的脂肪族聚酯, 并将溴原子用叠氮基团取代, 通过Cu(Ⅰ)催化的Click反应将其氨基化, 得到了侧链带有氨基的脂肪族聚酯.     

Formal Synthesis of Indolizidine and Quinolizidine Alkaloids from Vinyl Cyclic Carbonates

Cyclic carbonates have long been considered relatively inert molecules acting as protecting groups in complex multistep synthetic routes. This study shows that a concise, yet modular synthesis of indolizidine and quinolizidine alkaloids can be developed from vinyl-substituted cyclic carbonate (VCC) intermediates. Through a highly stereoselective palladium-catalyzed allylic alkylation reaction, these alkaloid motifs can be assembled in four synthetic and only two column purification steps. The combined results help to further advance functionalized cyclic carbonates as useful and reactive intermediates in natural product synthesis.     

可X射线显影的新型碘代聚碳酸酯的设计与合成

以丝氨醇、 4-碘苯甲酰氯和氯甲酸乙酯为原料, 通过酰胺化和分子内关环两步反应合成了一种新型的碘代环碳酸酯功能单体——4-碘-N-(2-氧代-1,3-二噁烷-5-基)苯甲酰胺(IBTMC). 以异戊醇为引发剂, 1,5,7-三叠氮双环(4.4.0)癸-5-烯(TBD)为催化剂, 使IBTMC与三亚甲基碳酸酯(TMC)进行开环共聚, 合成了一系列具有X射线不透过性的碘代聚碳酸酯材料, 并采用核磁共振氢谱( ¹H NMR)、 凝胶渗透色谱(GPC)、 差示扫描量热仪(DSC)、 热重分析(TGA)和X射线计算机断层成像系统(Micro-CT)表征了其化学结构与组成、 分子量与分子量分布、 热力学性能及X射线不透过性. 研究结果表明, 本文合成的碘代聚碳酸酯具有较窄的分子量分布、 良好的热稳定性及可调的X射线不透过性. 小鼠体内埋置实验结果表明, 碘代聚碳酸酯具备体内X射线成像的能力.     

Mechanism of ring-opening and elimination cooligomerization of cyclic carbonates and ε-caprolactone: Formation of cyclic cooligomers

The cooligomerization reactions of the comonomers ethylene carbonate-propylene carbonate, ethylene carbonate-ε-caprolactone and propylene carbonate-ε-caprolactone initiated by the p-tert-butylphenol/KHCO₃ system were investigated by means of electrospray ionization mass spectrometry combined with liquid chromatography. Three major cooligomer series were found in each case which were identified such as cooligomers with tert-butylphenol and hydroxyl headgroups. The presence of cyclic cooligomers was also unambigously observed. In addition, cooligomers carrying carbonate linkages were also identified, however, their fraction was very small compared to the cooligomer series without carbonate linkages. Besides the cooligomerization reaction, homooligomerization of ethylene and propylene carbonate was observed, as well as no linear homooligomers of ε-caprolactone were detected. Based on the LC-ESI MS results a mechanism is proposed for the formation of cyclic co-oligomers and the chain degradation of cooligomers containing carbonate linkages.     

UV-light induced photodegradation of bisphenol a in water: Kinetics and influencing factors

The synthesis of dimethyl carbonate (DMC) from methanol and ethylene carbonate (EC) without using any solvent was investigated in the presence of ionic liquids as catalysts. The conversion of ethylene carbonate was affected by the structure of ionic liquid. For a series of 1-alkyl-3-methylimidazolium ionic liquids, the one with shorter alkyl chain and the one with more nucleophilic anion showed higher reactivity. The conversion of EC also increased with CO₂ pressure and reaction temperature. Esterification of EC and methanol can be considered as a pseudo-first order reaction with respect to EC concentration. The activation energy was estimated as 50.1 kJ/mol.     

甲醇和碳酸丙烯酯合成碳酸二甲酯的研究

采用浸渍法以ZrO2为载体，以碱金属氢氧化物和碳酸盐为前驱体制备了不同的固体碱催化剂，在温和反应条件下考察了催化剂的酯交换扳应性能，并通过BET、XRD和CO2－TPD等方法对催化剂进行了表征，结果表明：Na2CO3负载到不同载体上，其催化性能明显不同，Na2CO3/ZrO2催化剂获得了较高的酯交换活性。载体的比表面和孔结构与催化剂的反应活性无一定的依存关系。而催化剂表面的酸碱性是影响酯交换活性的重要因素。     

Preparation of pure monodisperse calcium carbonate particles

The non-template synthesis of monodisperse spherical particles of calcium carbonate is reported. Particles of a 3.5–4.5 μm size were produced by precipitation of calcium carbonate from alcohol solution at subzero temperatures.     

Interaction of dimethyl carbonate with anilines in the presence of potassium methylate: Kinetics and the role of the base

The kinetic patterns of the reaction between dimethyl carbonate and anilines in the presence of a potassium methylate as a catalyst were studied. The mechanism of aminolysis was clarified, which includes the detachment of the proton from the amino group of aniline and the subsequent attack of the resulting anion on the carbonyl group of dimethyl carbonate. It is shown that when the reaction occurs in the dimethyl carbonate-methanol 3:1 system, the process can be described as an irreversible first-order reaction in the aniline though the target reaction is complicated by side interaction between potassium methylate and dimethyl carbonate. The rate constants of the target reaction with substituted anilines and of the side reaction in the temperature range of 70-90°C were determined. It is shown that the influence of the substituent on the reaction rate is described by the Hammett equation, with the constant of the reaction series being positive and the best correlation being achieved for σ-scale. The results obtained are consistent with the proposed mechanism of the reaction and are explained by the facilitation of the aniline deprotonation with increasing acceptor properties of the substituent. Effective activation energies for the reaction of various anilines with dimethyl carbonate are found.     

Abraham model enthalpy of solvation correlations for solutes dissolved in dimethyl carbonate and diethyl carbonate

Experimental data have been compiled from the published chemical and engineering literature on the enthalpies of solvation for 80 different inorganic gases and organic vapours in diethyl carbonate and for 57 different gaseous compounds in dimethyl carbonate. The compiled data are used to derive mathematical correlations based on the Abraham solvation parameter model. The derived expressions describe the experimental solvation enthalpies in diethyl carbonate and dimethyl carbonate to within standard deviations of 2.1 and 2.7 kJ mol^?1, respectively.     

Studies of the hydrolytic stability of poly(urethane-urea) elastomers synthesized from oligocarbonate diols

Polyurethane and poly(urethane-urea) elastomers synthesized from oligocarbonate diols are characterized by very good mechanical properties, biocompatibility and excellent resistance to both oxidation and hydrolysis and therefore are widely used in medical applications. In this paper the results of studies on hydrolytic stability of poly(urethane-urea) elastomers (PURC) obtained by moisture-curing of corresponding urethane prepolymers synthesized from isophorone diisocyanate (IPDI) and four different oligocarbonate diols (OCD) are presented. OCD were synthesized from dimethyl carbonate and 1,6-hexanediol, from cyclic ethylene carbonate and 1,6-hexanediol as well as from trimethylene carbonate. The changes of the sample weight, mechanical properties and surface properties after immersion in a standard phosphate buffer solution (pH = 7.4) for up to 3 months at 70 °C were monitored. It was shown that neither sample weight nor mechanical properties changed significantly for PURC obtained from OCDs synthesized from 1,6-hexanediol and dimethyl carbonate or ethylene carbonate what confirms good resistance to hydrolysis of those PURC. Also SEM studies of those samples before and after immersion did not reveal any surface degradation effects. However, PURC sample obtained from OCD synthesized from trimethylene carbonate showed significant changes in mechanical properties and distinct change of appearance and surface erosion after 3 months immersion. The initial decrease and later increase of stress at break observed for PURC samples during immersion, was explained by the reaction of residual NCO groups present in PURC with water leading to molecular weight increase which proceeded during immersion period in parallel to hydrolysis of carbonate bond.     

Highly active bifunctional cobalt‐salen complexes for the synthesis of poly(ester‐block‐carbonate) copolymer via terpolymerization of carbon dioxide,propylene oxide,and norbornene anhydride isomer: Roles of anhydride conformation consideration

This article describes an efficient synthetic route of defined reactive polyester‐block‐polycarbonate copolymers, utilizing a bifunctional SalenCoNO₃ complex as catalyst for the single‐step terpolymerization of norbornene anhydride (NA), propylene oxide, and carbon dioxide. The geometric isomer of NA plays an important role in polymerization efficacy and the resulting polymer microstructure, including carbonate content, sequence isomer of polycarbonate moiety, and molecular weight. A hydroxyl‐functionalized polyester–polycarbonate block copolymer was synthesized by a thiol‐ene reaction. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 789–795     

Microbiologically Induced Carbonate Precipitation in the Restoration and Conservation of Cultural Heritage Materials

Microbiologically induced carbonate precipitation (MICP) is a well-known biogeochemical process that allows the formation of calcium carbonate deposits in the extracellular environment. The high concentration of carbonate and calcium ions on the bacterial surface, which serves as nucleation sites, promotes the calcium carbonate precipitation filling and binding deteriorated materials. Historic buildings and artwork, especially those present in open sites, are susceptible to enhanced weathering resulting from environmental agents, interaction with physical-chemical pollutants, and living organisms, among others. In this work, some published variations of a novel and ecological surface treatment of heritage structures based on MICP are presented and compared. This method has shown to be successful as a restoration, consolidation, and conservation tool for improvement of mechanical properties and prevention of unwanted gas and fluid migration from historical materials. The treatment has revealed best results on porous media matrixes; nevertheless, it can also be applied on soil, marble, concrete, clay, rocks, and limestone. MICP is proposed as a potentially safe and powerful procedure for efficient conservation of worldwide heritage structures.     

Kinetics of the thermal decomposition of cadmium carbonate (CdCO3)

Cadmium carbonate used in the study was prepared from cadmium chloride, ammonium carbonate and ammonia. The X-ray powder diffraction, infrared spectral and chemical analysis conducted on the product show that the sample is of analytically acceptable purity. The thermal decomposition kinetics of cadmium carbonate was then studied by using the isothermal thermogravimetric method under a flow of dry nitrogen gas. The decomposition kinetics is best described by a two-dimensional phase boundary reaction mechanism (R ₂). An activation energy (E _a) of 135.006 kJ·mol^?1 and natural logarithm of the frequency factor (lnZ) of 16.754 were obtained in the range of 9 temperatures (400, 390, 380, 370, 360, 350, 340, 330 and 320°C).