Organic acid catalyzed production of platform chemical 5-hydroxymethylfurfural from fructose: Process comparison and evaluation based on kinetic modeling

Fructose was converted to 5-hydroxymethylfurfural (HMF), an important biomass-derived platform chemical, under mild conditions (100–130 °C) with several organic acids including p-toluene sulfonic (pTSA), oxalic, maleic, malonic and succinic acids as the catalysts. The process kinetics was compared considering fructose dehydration to HMF as the objective reaction and condensation of fructose and HMF to humin and rehydration of HMF as the main side reactions. DMSO was found to be the most effective solvent reaction medium to obtain high fructose conversion and HMF yield. Observed kinetic modeling illustrated that the rehydration and condensation of HMF in DMSO actually could be neglected, especially for the oxalic acid catalyzed system. The determined observed activation energy for fructose conversion to HMF and humin in DMSO medium was 33.75 and 24.94 kJ/mol for pTSA catalyzed system, and 96.51 and 78.39 kJ/mol for oxalic acid-catalyzed system, respectively. HMF yields of 90.2% and 84.1% were obtained for pTSA and oxalic acid catalyzed systems, respectively.     

磺酸官能化的磁性核壳结构的纳米材料用于果糖脱水制备5-羟甲基糠醛(英)

通过反相微乳液法制备了以Fe₃O₄为核,磺酸官能化的硅基材料为壳层的磁性酸性催化剂.首先制备纳米Fe₃O₄磁核,然后涂层包覆苯基修饰的纳米级硅层,最后进行苯基磺化修饰,制得固体酸催化剂Fe₃O₄@Si/Ph-SO₃H.在果糖脱水制备5-羟甲基糠醛反应中,该催化剂表现出较好的催化活性,优于传统催化剂A-15,且与均相无机酸催化活性相当.当采用二甲基亚砜作溶剂,在110℃下反应3 h,果糖转化率达到99%,5-羟甲基糠醛收率为82%.另外,该催化剂经磁法回收后可多次重复使用.     

磺酸多相催化剂用于二甲基亚砜中C6-单糖脱水制5-羟甲基糠醛（英）

Sulfonic acid-functionalized heterogeneous catalysts have been evaluated in the catalytic dehydration of C(,monosaccharides into 5-hydroxymethylfurfural(HMF) using dimethyl sulfoxide(DMSO)as solvent.Sulfonic commercial resin Amberlyst-70 was the most active catalyst,which was ascribed to its higher concentration of sulfonic acid sites as compared with the other catalysts,and it gave 93 mol%yield of HMF from fructose in 1 h.With glucose as the starting material,which is a much more difficult reaction,the reaction conditions(time,temperature,and catalyst loading) were optimized for Amberlyst-70 by a response surface methodology,which gave a maximum HMF yield of 33 mol%at 147 °C with 23 wt%catalyst loading based on glucose and 24 h reaction time.DMSO promotes the dehydration of glucose into anhydroglucose,which acts as a reservoir of the substrate to facilitate the production of HMF by reducing side reactions.Catalyst reuse without a regeneration treatment showed a gradual but not very significant decay in catalytic activity.     

离子液体中树脂催化转化果糖为5-羟甲基糠醛

开发了以离子液体1-丁基-3-甲基咪唑氯盐([BMIM]Cl)为溶剂, 固体酸离子交换树脂NKC-9为催化剂转化果糖为5-羟甲基糠醛的绿色工艺. 在此催化体系中, 100 ℃下反应10 min时5-HMF的产率达到78.0%, 其反应时间远远小于已有文献报道的长达数小时的反应时间. 在此催化体系中, 果糖起始浓度的增加对5-HMF产率影响不大, 因而此工艺同样适用于处理高浓度的果糖溶液. 离子液体[BMIM]Cl和树脂组成的催化体系可以循环使用, 经过9次重复使用后仍能保持稳定的催化活性.     

A green development of Bernthsen 9-substituted acridine synthesis in the absence of solvent catalyzed by p-toluenesulphonic acid (p-TSA)

Abstract

Bernthsen reaction has been carried out under microwave irradiation in the presence of p-TSA (10 mol%) as catalyst in a solventless reaction to provide 9-substituted acridines. In the present report, time economy and better yields as compared to conventional Bernthsen reaction are described.     

Viscosity Investigations on the Binary Systems of (1 ChCl:2 Ethylene Glycol) DES and Methanol or Ethanol

In this study, the viscosity behavior of two mixtures of Ethaline (1 ChCl:2 ethylene glycol) with either methanol or ethanol were investigated over the temperature range of 283.15–333.15 K at atmospheric pressure. The measured viscosities of neat Ethaline, methanol, and ethanol showed reliable agreement with the corresponding reported literature values. The mixture viscosities were modeled by an Arrhenius-like model to determine the behavior of viscosity with respect to temperature. The data were also modeled by the four well-known mixture viscosity models of Grunberg–Nissan, Jouyban–Acree, McAllister, and Preferential Solvation. All of the model results were reliable, with the Jouyban–Acree and Preferential Solvation models showing the most accurate agreement with the experimental measurements. The Jones–Dole viscosity model was also investigated for the measured viscosities, and by analyzing the results of this model, strong interactions among Ethaline and the alcohol molecules were proposed for both systems. As a final analysis, viscosity deviations of the investigated systems were calculated to study the deviations of the viscosity behaviors with respect to ideal behavior. Both systems showed negative viscosity deviations at all of the investigated temperatures, with the negative values tending towards zero, and hence more ideal behavior, with increasing temperatures. Moreover, in order to correlate the calculated viscosity deviations, the Redlich–Kister model was successfully used for both systems and at each investigated temperature.     

Phase behaviour and electro-optical response of systems composed of nematic liquid crystals and poly (2-ethylhexylacrylate)

Experimental studies of phase diagram and morphology of mixtures composed of linear poly(2-ethylhexylacrylate) (poly-2EHA) of molecular weight M_w = 92000g/mol and E7, an eutectic blend of nematic liquid crystals (LCs), were performed. The latter consists of four cyanoparaphenylenes, i.e. 4-cyano-4?-n-pentyl-biphenyl (5CB), 4-cyano-4?-n-heptyl-biphenyl (7CB), 4-cyano-4?-n-oxyoctyl-biphenyl (8OCB) and 4-cyano-4?’-n-pentyl-p-biphenyl (5CT). Thermal properties of the poly-2EHA/E7 system were studied by differential scanning calorimetry and the sample morphologies were investigated by optical microscopy. Phase diagram analysis revealed an increase of the nematic–isotropic transition temperature when E7 was added to poly-2EHA, compared to pure E7. This effect, related to a preferential miscibility phenomenon of E7 components towards poly-2EHA, was evidenced by gas chromatography analysis coupled to mass spectrometry, allowing to qualify and quantify the content of phase separated LC domains. Thermograms of model LC mixtures including 5CB, 7CB, 8OCB and 5CT, which correspond to their composition in segregated LC domains of poly-2EHA/E7, present strong deviations from eutectic behaviour. In order to access the impact of such variations for practical applications, such a model LC mixture was introduced in photochemically crosslinked 2-EHA (polycross-2EHA). Surprisingly, the electro-optical response of the obtained polycross-2EHA/LC films was considerably improved compared to the original polycross-2EHA/E7 system.     

Application of model-fitting and model-free kinetics to the study of non-isothermal dehydration of equilibrium swollen poly (acrylic acid) hydrogel: Thermogravimetric analysis

The dehydration kinetics of equilibrium swollen poly (acrylic acid) hydrogel is analyzed by both model-fitting and model-free approaches. The conventional model-fitting approach assuming a fixed mechanism throughout the reaction and extract a single values of the apparent activation energy (E_a) and pre-exponential factor (A) and was found to be too simplistic. The values of Arrhenius parameters obtained in such a way are in fact an average that does not reflect changes in the reaction mechanism and kinetics with the extent of conversion. The model-free approach allows for a change of mechanism and activation energy, E_a, during the course of a reaction and is therefore more realistic. The complexity of the dehydration of poly (acrylic acid) hydrogel is illustrated by the dependence of E_a and A on the extent of conversion, α (0.05 ≤ α ≤ 0.98). Under non-isothermal conditions, E_a decreases with α for 0 ≤ α ≤ 0.50, followed by an approximately constant value of E_a during further dehydration. For 0 ≤ α ≤ 0.50, dehydration is complex, which probably involving a combination of several processes. In the constant-E_a region, non-isothermal dehydration follows the three-dimensional phase boundary model (R3). The complex hydrogen-bond pattern in poly (acrylic acid) hydrogel is probably responsible for the observed dehydration behavior. An existence of compensation effect is accepted and explanation of compensation effect appearance during the hydrogel dehydration is suggested.     

Second-sphere coordination in non-spherical anion binding: Synthesis, characterization and X-ray structure of cis-diazidobis(ethylenediamine)cobalt(III) 2-chloro,5-nitrobenzenesulphonate monohydrate

The dipole, quadrupole, and other second moments have been determined at the equilibrium structures of the halogen azides, isocyanates, and isothiocyanates, for both principal axes and inertial axes. The theoretical procedures used are Möller–Plesset (MP2) and DFT (B3LYP) methodologies, with TZVP and cc-pVTZ basis sets. There is systematic variation in the calculated directions of the dipole moments in the present series, where B3LYP and MP2 methodologies show differences up to ∼20° for the directions. This discrepancy is largest in ClN₃, but quite significant for several other compounds, such as XNCO (where X = Cl, Br and I). The dipole moments of the compounds rotate through a wide angle, as the halogen changes; in contrast, the axes of the second moments rotate to a much smaller degree. The properties are compared with the limited microwave spectral data so far available, in the hope that the present study will encourage further experimental study. There is an urgent need for new experimental data on the dipole moment a,b-components for these compounds.     

Polymeric structures in the metal complexes of 5-sulfosalicylic acid: The rubidium(I), caesium(I) and lead(II) analogues

The complexes of 3-carboxy-4-hydroxybenzenesulfonic acid (5-sulfosalicylic acid, H₃SSA) with rubidium(I), caesium(I) and lead(II) have been synthesized and characterized using single-crystal X-ray methods at 130 K. The rubidium(I) complex 1, [Rb₃(H₂SSA)(HSSA)(H₂O)₄]_n, is an unstable hydrate variant of a previously described complex [Rb(H₂SSA)(H₂O)]_n, and comprises three independent and different seven-coordinate metal polyhedra interlinked through oxygen donors of the sulfonate, carboxylate and phenolate groups of the 5-sulfosalicylate ligands (one of which is dianionic, the other monoanionic), and one bridging water, giving a three-dimensional hydrogen-bonded framework polymer structure. The anhydrous caesium(I) complex 2 [Cs(H₂SSA)]_n, which has been previously described in a room-temperature determination, has a three-dimensional framework polymer structure based on an irregular Cs–O₉ repeating unit. Complex 3 with lead(II), [Pb(H₂SSA)₂(H₂O)]_n, forms helical step-polymer ribbon substructures having an irregular Pb–O₇ coordination centre comprising a single monodentate water and six sulfonate-O donors bridging three separate metals. The carboxylic acid and phenol substituent groups of the 5-sulfosalicylate ligand link the ribbons peripherally through hydrogen bonds, giving a three-dimensional layered framework polymer structure.     

Preparation and swelling behavior of amphoteric superabsorbent composite with semi-IPN composed of poly(acrylic acid)/Ca-bentonite/poly(dimethyldiallylammonium chloride)

Amphoteric superabsorbent composite with semi-interpenetrating polymer networks (semi-IPN) composed of poly(acrylic acid) (PAA)/Ca-bentonite/poly(dimethyldiallylammonium chloride) (PDMDAAC) was prepared by a combination of intercalative polymerization and a sequential IPN method and the effects of reaction parameters on the swelling capacity were studied. PDMDAAC was used as a polycation to modify bentonite and form semi-IPN with lightly crosslinked PAA. FTIR and TG were used to characterize the amphoteric superabsorbent composites with semi-IPN. The thermal stability of the product was not degraded as in the case of using small molecular surfactant to modify bentonite. The contents of carboxylic groups and nitrogen had been determined. This indicated that the product with certain content of carboxylic groups and nitrogen is inclined to exhibit excellent swelling capacity. The presence of PDMDAAC improved the swelling capacity. The resulting amphoteric superabsorbent composite showed excellent swelling capacity of 1578 g/g in distilled water and 136 g/g in 0.9 wt% NaCl solution. Copyright © 2007 John Wiley & Sons, Ltd.     

Novel crystal engineering in the crown ether nickel maleonitriledithiolate complexes,synthesis and crystal structures of [Na(N15C5)2]2[Ni(mnt)2] and [Na(N15C5)]2[Ni(mnt)2]

Reactions of N15C5 (2,3-naphtho-15-crown-5) with nickel maleonitriledithiolate sodium complex, Na₂[Ni(mnt)₂] (mnt?=?maleonitriledithiolate) using different molar ratios (2?:?1 and 4?:?1) afforded two structurally different complexes [Na(N15C5)₂]₂[Ni(mnt)₂] (1) and [Na(N15C5)]₂[Ni(mnt)₂] (2). The sandwich [Na(N15C5)₂]⁺ and mono-capped [Na(N15C5)]⁺ organic cations are observed in the crystals of 1 and 2, respectively, with the same [Ni(mnt)₂]^2? inorganic conteranions. It is these structurally different organic cations that lead to the dissimilar structures. Complex 1 exhibits a one-dimensional (1D) chain-like structure assembled by intercantionic {[Na(N15C5)₂]⁺}_∞ π–π stacking interactions and electrostatic interactions, while 2 displays a novel two-dimensional (2D) corrugated sheet-like structure constructed by Na–N interactions which occur between the [Na(N15C5)]⁺ inorganic cations and [Ni(mnt)₂]^2? inorganic anions.     

Cobalt(II) and nickel(II) chelates of some 5-pyrazolone-based,Schiff-base ligands

The cobalt(II) and nickel(II) chelates of Schiff bases, derived by condensing 4-butyryl-3-methyl-1-phenyl-2-pyrazolin-5-one (BMPP) with o-, m-, p-phenylenediamine, benzidine, and ethylenediamine have been synthesized and characterized by elemental analyses, thermogravimetric analyses (TGA), conductance data, magnetic measurements, IR, ¹H NMR, ¹³C NMR, mass, and electronic spectroscopies. Each of the Schiff bases was an ONNO donor to metal forming chelates formulated as [M(L)(H₂O)₂] _n with M = Ni(II) and Co(II) and L is the di-anion of the Schiff base. The monomeric (n = 1) and dimeric (n = 2) species of these metal chelates, based on available evidence, are suggested.     

FeIII in a high-spin state in bis(5-bromosalicylaldehyde 4-ethylthiosemicarbazonato-κ3O,N1,S)ferrate(III) nitrate monohydrate,the first example of such a cationic FeIII complex unit

The synthesis and crystal structure (100 K) of the title compound, [Fe(C₁₀H₁₁BrN₃OS)₂]NO₃·H₂O, is reported. The asymmetric unit consists of an octahedral [Fe^III(HL)₂]⁺ cation, where HL^? is H-5-Br-thsa-Et or 5-bromosalicylaldehyde 4-ethylthiosemicarbazonate(1?) {systematic name: 4-bromo-2-[(4-ethylthiosemicarbazidoidene)methyl]phenolate}, a nitrate anion and a noncoordinated water molecule. Each HL^? ligand binds via the thione S, the imine N and the phenolate O atom, resulting in an Fe^IIIS₂N₂O₂ chromophore. The ligands are orientated in two perpendicular planes, with the O and S atoms in cis and the N atoms in trans positions. This [Fe(HL)₂](anion)·H₂O compound contains the first known cationic Fe^III entity containing two salicylaldehyde thiosemicarbazone derivatives. The Fe^III ion is in the high-spin state at 100 K. In addition, a comparative IR spectroscopic study of the free ligand and the ferric complex is presented, demonstrating that such an analysis provides a quick identification of the degree of deprotonation and the coordination mode of the ligand in this class of metal compounds. The variable-temperature magnetic susceptibility measurements (5–320 K) are consistent with the presence of a high-spin Fe^III ion with a zero-field splitting D = 0.439 (1) cm^?1.     

Binding of a surfactant counterion to low-charge-density poly(acrylic acid) and poly(methacrylic acid)

The binding of a cationic surfactant, dodecylpyridinium (C12Py) chloride, with a low-charge-density poly (methacrylic acid) (PMA) was investigated in buffer solutions under the condition of constant pH. The binding isotherms with PMA consisted of two and three steps at a pH lower and higher than 3.2, respectively. Bindings in the first step were independent of pH and this step was considered to correspond to the solubilization of the hydrocarbon chains of C12Py into the nonpolar region of the compact form of PMA. This is the indication of the compact form from the binding isotherm. At pH higher than 3.2, the second step was discriminated and it depended on the pH. In the third step, a sharp rise in the degree of binding (β) was observed accompanying the solubilization of the precipitates of the PMA–C12Py complex. The binding with poly(acrylic acid) (PAA) and PMA in conventional unbuffered NaCl solutions was also examined and the pH profile of the solution during the binding process was determined. In the case of unbuffered NaCl solutions, the binding with PAA took place cooperatively at the critical association concentration (cac). The binding isotherm consisted of two steps and the pH decreased with the increase in β. The binding isotherm of PMA, on the other hand, consisted of three steps: the pH decreased slightly in the first step and considerably in the second step with the increase in β but it increased with β in the third step, exhibiting a pH minimum around 3.2. The binding in the first step coincided with that obtained in the buffered solutions. Linear relationships between β and the pH were found for both polymers. In the case of PMA, no cac was observed in both buffered and unbuffered NaCl solutions. Received: 24 January 2001 Accepted: 23 May 2001     

Development and validation of an HPLC method to determine metabolites of 5‐hydroxymethylfurfural (5‐HMF)

The food component 5‐hydroxymethylfurfural is supposed to have antioxidative properties and is therefore used as an acting agent in a novel anticancer infusion solution, named Karal®, and an oral supplementation. Previous studies showed that after oral and intravenous application, the substance is completely decomposed to its metabolites: 5‐hydroxymethylfuroic acid, 2,5‐furandicarboxylic acid, and N‐(hydroxymethyl)furoyl glycine. The formation of a fourth metabolite, namely 5‐sulphoxymethylfurfural, is still not clarified according to literature. Due to commercial unavailability, synthesis of 5‐sulphoxymethylfurfural was conducted and a synthesis procedure for N‐(hydroxymethyl)furoyl glycine had to be developed. Identification of the synthesised compounds was proven by LC‐MS and NMR. An appropriate HPLC method was established to obtain good separation of the four possible metabolic substances and 5‐hydroxymethylfurfural within 12 min via a HILIC column (150 × 4.6 mm, 5 μm) using a gradient grade system switching from mobile phase A (ACN/ammonium formate 100 mM, pH 2.35, 95:5, v/v) to mobile phase B (ACN/ammonium formate 100 mM, pH 2.35, 85:15, v/v). The procedure was afterward validated following ICH guidelines in terms of selectivity, linearity, precision, LOD, and LOQ.     

Nb-P/SBA-15催化剂的制备及其对果糖水解制5-羟甲基糠醛的催化性能

果糖催化脱水制5-羟甲基糠醛（5-HMF）是生物质转化制高附加值化合物过程中的一个重要反应。采用自制的介孔SBA-15,浸渍法制备了Nb/SBA-15催化剂,再经磷酸化处理制得Nb-P/SBA-15催化剂,研究了该催化剂在果糖脱水制5-HMF反应中的性能。SEM、TEM、BET和XRD表征结果表明,Nb/SBA-15和Nb-P/SBA-15完好地保留了SBA-15的微观结构,其内孔道直径为10 nm,铌酸在孔内表面分布均匀;负载铌和磷酸化后,孔壁变薄。NH₃-TPD结果显示,Nb/SBA-15经磷酸预处理后,不仅弱酸性位有所增加,而且产生了中强酸和强酸性位,使得在含水两相体系果糖脱水反应中,Nb-P/SBA-15比Nb/SBA-15具有更高的催化活性和5-HMF选择性。同时考察了反应温度、溶剂比例、反应时间对果糖脱水的影响,结果表明,以水/MIBK（V/V=1/2）为溶剂时,160 ℃下反应1.5 h,果糖转化率和5-HMF收率分别高达96.1%和92.6%。Nb-P/SBA-15经循环使用四次后仍具有较好的催化活性,表明该催化剂具有较高的耐水稳定性。     

Poly(N,N-dimethylaminoethyl methacrylate) grafted poly(vinyl chloride)s synthesized via ATRP process and their membranes for dye separation

To functionalize poly(vinyl chloride)(PVC) for various applications, monomers containing tertiary amine group are incorporated into PVC via atom transfer radical polymerization(ATRP) initiated by the labile chlorines in their backbones. The kinetics of synthesis was carefully investigated, and it is proven that the grafting polymerization process can be effectively controlled by regulating the reaction time. The membranes are fabricated using PVC and copolymers by non-solvent induced phase separation(NIPS) process. The hydrophilicity and pore structure of copolymer membranes were enhanced as well, these membranes are endowed with positive charge. When PDMA%(i.e., the PDMA weight percentage in copolymer) is 31.1%, the flux and Victoria blue B rejection are 26.0 L?m?2?h?1(0.5 MPa) and 91.2%, respectively. Thus, the newly synthesized polymer is proven to be a promising material for dye separation with positive charges.     

Synthesis, Crystal Structure, Properties and Thermoanalysis of Complexes of Cu(II) and Ni(II) with Taurine-5-chlorosalicylaldelyde Schiff Base

Introduction The complexes of amino acid Schiff base have re-ceived considerable attention because of the interests in the biogical field.1-4 Taurine is a special amino acid in human beings. Recently, the complexes of taurine con-densation salicylaldelyde Schiff base have been re-ported,3-7 but the complexes of taurine condensation derived salicylaldelyde Schiff base have not been re-ported yet. In order to examine its anticancer and antibiosis ac-tivity of the complexes of taurine condensa…