Favorable interactions of amine- and ester-terminated PAMAM with cationic surfactants: photophysical and transport studies

Conductivity (kappa), turbidity (tau), and fluorescence (I1/I3) studies of hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) in aqueous poly(amido amine) (PAMAM) dendrimers of generations 0 to 2.5 G have been carried out. The complexation of surfactant monomers with the PAMAM surface groups is demonstrated by the critical aggregation concentration (cac), which is two to three orders of magnitude less than the micellization of cationic surfactants in aqueous PAMAM and denoted by critical micelle concentration (cmc*). In the presence of aqueous amine-terminated PAMAM, the cmc* value for each surfactant was much lower than the cmc in pure water, while they remain close to each other in the presence of aqueous ester-terminated PAMAM for each surfactant. The fluorescence studies demonstrated that both amine- and ester-terminated PAMAM interact with the cationic surfactants, though the mode of interaction varied due to the different nature of surface groups.     

Head-group-influenced mixed micellization of sodium deoxycholate with conventional hydrocarbon surfactants of identical hydrocarbon tails

Conductivity, viscosity, turbidity, and NMR measurements were performed over most of the mole fraction range for sodium deoxycholate (SDC) with hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl). All studies demonstrate that the mixed-micelle formation is more favorable in SDC plus HTAB rather than SDC plus HPyBr or SDC plus HPyCl mixtures. The results showed that the bulky pyridinium head groups of HPyBr or HPyCl create steric incompatibility with rigid SDC monomers in the mixed state.     

Head-group-induced structural micellar transitions in mixed cationic surfactants with identical hydrophobic tails

The mixed micelle formation by hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium chloride (HPyCl) with benzylhexadecyldimethylammonium chloride (BHDACl) was studied with the help of conductivity, 3, and viscometric measurements. Each 3 curve for HTAB, HPyBr, and HPyCl showed a single break, whereas double breaks were observed in the case of BHDACl and its binary mixtures with HTAB, HPyBr, and HPyCl. The first break, c_1,M, was due to mixed-micelle formation, whereas the second one, c_2,M, was due to the structural micellar transitions in the mixed micelles formed during the first break. The quantitative analysis of the mixed-micelle formation corresponding to the first break was carried out with the help of regular solution and Motomura's approximations. The BHDACl plus HTAB and BHDACl plus HPyBr mixtures showed weak synergistic interactions, whereas the BHDACl plus HPyCl mixture was close to ideal. A variation in the degree of dissociation corresponding to the first and second breaks demonstrated a similar variation over the whole mixing range and this was attributed to the identical nature of synergism in both kinds of micellar aggregates available at c_1,M, and c_2,M. They were rich in BHDACl over most of the mole fraction range. Unlike conductivity measurements, the relative viscosity demonstrated that the micellization of HTAB, HPyBr, and HPyCl proceeded through a minimum, whereas that for BHDACl and its mixtures showed a strong maximum in each case, being stronger in the case of the BHDACl plus HTAB and BHDACl plus HPyCl mixtures.     

NMR studies of mixed cationic surfactants with similar tails and dissimilar bulky head groups

The mixed micelle formation by benzyldimethylhexadecylammonium chloride (BHDACl) with hexadecyltrimethylammonium bromide (HTAB), hexadecylpyridinium bromide (HPyBr), and hexadecylpyridinium choride (HPyCl) has been studied with the help of ¹H and ¹³C NMR studies influenced by both the head-group modifications as well as mutual hydrophobicity. The results showed that the mixed micelles of BHDACl+HPyBr and BHDACl+HPyCl mixtures are significantly affected by the steric factors originating from the bulkiness of the pyridinium head group of both cosurfactants in the stern layer. The result is that BHDACl+HPyBr and BHDACl+HPyCl mixed micelles are in the state of loose micellar arrangements rather than the mixed micelles of the BHDACl+HTAB mixture. A relative comparison between Br ^- and Cl ^- counterion effect suggests that the stronger binding ability of Br ^- than Cl ^-produces relatively compact mixed micelles.     

Benzylic and pyridinium head groups controlled surfactant-polymer aggregates of mixed cationic micelles and anionic polyelectrolytes

The oppositely charged electrostatic interactions between cationic single and mixed micelles of benzyldimethylhexadecylammonium chloride (BHDACl), hexadecylpyridinium bromide (HPyBr), hexadecylpyridinium chloride (HPyCl), and their mixtures with anionic polyelectrolytes, namely carboxymethylcellulose sodium salt (CMC) and polystyrene sulfonate sodium salt (PSS) were studied with the help of conductivity (), viscosity (), turbidity (), and NMR studies. showed single aggregation process, which was represented by apparent critical micelle concentration, acmc, of each surfactant in aqueous polyelectrolyte solution. Both and demonstrated strong electrostriction effects in the case of BHDACl-polyelectrolyte systems due to weak electrostatic interactions in view of steric hindrances created by benzylic group of BHDACl. ¹H NMR results showed that the head group proton resonances of BHDACl upon incorporation of HPyBr or HPyCl in the presence of CMC or PSS remained identical to that in pure water, which demonstrated very weak interactions between BHDACl and polyelectrolytes. A less shielding of pyridinium head group protons by BHDACl in the presence of polyelectrolytes in comparison to that in pure water indicated favorable electrostatic interactions between pyridinium head groups and anionic polyelectrolytes. HPyBr in comparison to HPyCl showed stronger interactions with polyelectrolytes.     

Head-group-modification-controlled mixing behavior of binary cationic surfactants: conductometric,viscometric, and NMR studies

The mixed-micelle formation by hexadecyltrimethylammonium bromide (HTAB) with hexadecyltriphenylphosphonium bromide (HTPB) and hexadecyltributylphosphonium bromide (HTBB), and by hexadecylpyridinium bromide (HPyBr) with HTPB and HTBB has been studied with the help of conductivity, viscometry, and NMR studies. The conductivity studies showed close-to-ideal mixing in all cases with weak synergistic interactions. The relative viscosity is more sensitive than the conductivity and demonstrated that the micellization of HTAB, HPyBr, HTPB, and HTBB proceeded through the appearance of a minimum, whereas their mixtures showed a strong maximum in each case. NMR measurements suggested that bulky head groups of HTPB and HTBB induce significant steric hindrance in the mixed state upon mixing with HTAB and HPyBr. The appearance of the maximum shown by the relative viscosity in the mixed-micellization process is due to steric compulsions, which may also lead to some structural transitions.     

Interactions between cationic mixed micelles and poly(vinyl pyrrolidone)

 The conductances of trimethyltetradecylammonium bromide (TTAB) + trimethylhexa decylammonium bromide (HTAB) and TTAB + trimethyldodecylammonium bromide (DTAB) mixtures over the entire mole fraction range were measured in aqueous poly(vinyl pyrrolidone) (PVP) containing 1–10 wt% PVP at 30 °C. Each conductivity (κ) curve for the TTAB + HTAB mixtures showed two breaks corresponding to two aggregation processes over the whole mole fraction range, except in the case of pure TTAB, where a single break corresponding to the conventional critical micelle concentration (cmc) was observed. In the case of TTAB + DTAB mixtures, each κ curve at a particular mole fraction of TTAB showed only one break, which was quite close to a similar one in pure water. In TTAB + HTAB mixtures, the first break is called the critical aggregation concentration. It is close to the conventional cmc and is attributed to the polymer-free micelle formation, whereas the second break is due to the polymer-bound micellar aggregates. However, no polymer-bound micellar aggregation process was observed in the case of TTAB + DTAB mixtures. Therefore, the presence of micelle–PVP interactions in the TTAB + HTAB case have been attributed to the stronger hydrophobicity of HTAB or TTAB + HTAB micelles in comparison to that of single or mixed micelles of TTAB + DTAB mixtures. From the conductivity data, various micelle parameters in the presence of PVP have been computed and discussed in terms of micelle–polymer interactions. The mixing behavior of TTAB +  HTAB corresponding to the first break, and that of TTAB + DTAB mixtures in the presence of PVP, is close to ideal and is also identical to that in pure water. Received: 26 August 1999 Accepted: 6 November 1999     

Interaction and Stability of Mixed Micelle and Monolayer of Nonionic and Cationic Surfactant Mixtures

Interaction and stability of binary mixtures of cationic surfactants hexadecyltrimethylammonium bromide (HTAB) or hexadecylpyridinium bromide (HPyBr) with nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) have been studied at different mole fraction of cationic surfactants by using interfacial tension measurements and fluorescence probe techniques. From interfacial tension measurements, the critical micellar concentration and various interfacial thermodynamic parameters have been evaluated. The experimental cmc's were analyzed with the pseudophase separation model, the regular solution theory, and the Maeda's approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTAB + Mega-10 were obtained. It has been observed that the aggregation number of mixed micelles deviates negatively from the ideal behavior. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio and found to be increase with the increase of ionic content. The polarization of fluorescence probe Rhodamine B was monitored at different mole fraction of cationic surfactants.     

ESR and NMR studies of poly (amidoamine) dendrimers with ionic surfactants in different media

The electron paramagnetic resonance (EPR) study has been carried out for the micellar solutions of various ionic surfactant solutions as well as various generations of aqueous dendrimer both in their respective presence as well as their absence at 25°C and in different media. From these measurements, the rotation correlation time (τ_B) have been calculated for all the ionic surfactant + PAMAM + water system. A variation in the τ_Bvalue remains mostly constant for the dodecyltrimethyammonium bromide (DTAB) and tetradecyltrimethylammonium bromide (TTAB) + PAMAM + water ternary mixtures. The τ_Bvalue shows an increase with the increase in the amount of PAMAM for SDS in basic medium and for 12-2-12 in acidic medium. It has been concluded from these results that SDS undergo complexation with all generations of PAMAM in basic medium and 12-2-12 in acidic medium and produce stronger hydrophobic environment. The nuclear magnetic resonance study (NMR) allowed us to evaluate the spin–spin relaxation (T₁) times of SDS in the presence of all generations of PAMAM. The T₁ values for all the tail protons of SDS showed a slight decrease with the increase in the constant amount of PAMAM suggesting the adsorption of PAMAM molecules on the micelle surface.     

HEXADECYLTRIMETHYLAMMONIUM BROMIDE + TETRADECYLTRIMETHYL-AMMONIUM BROMIDE MIXED MICELLES IN AQUEOUS GLYCOL OLIGOMERS

The conductances of hexadecyltrimethylammonium bromide (HTAB) + tetradecyltrimethylammonium bromide (TTAB) mixtures over the entire mole fraction range of HTAB (α_HTAB) were measured in pure water as well as in the presence of various aqueous ethylene glycol oligomers containing 5, 10 and 20 wt% of each additive in their respective binary mixtures at 30°C. From the conductivity data, the critical micellar concentration (cmc), degree of counter ion association (χ) and the standard free energy of transfer of the surfactant hydrocarbon chain from the medium to the micelle (ΔG^O _HP ) for HTAB and TTAB were computed. From the conductivity data of mixed surfactants systems, apart from cmc and χ, the regular solution theory parameters were also computed in order to explore the non-ideality in the mixed micelle formation in the presence of additives. The micellar parameters of both kind of surfactants and their mixtures show a significant dependence on the amount as well as on the number of repeating units of glycol oligomers. However, the non-ideality of mixed micelle formation remains unaffected in the presence of additives. These results have been explained on the basis of the medium effects of aqueous additive and it has been concluded that there are no significant interactions of glycol oligomers with the micelles of single and mixed surfactants.     

Fluorescence studies of interactions of ionic surfactants with poly(amidoamine) dendrimers

The pyrene fluorescence measurements have been carried out for the micelle formation of sodium dodecyl sulfate (SDS), dodecyltrimethylammonium bromide (DTAB), and dimethylene bis(dodecyldimethylammonium bromide) (12-2-12) in the presence of fixed different amounts of various generations of poly(amidoamine) (PAMAM). The critical micelle concentration (cmc) of SDS decreases with an increase in the fixed amount of PAMAM, suggesting the facilitation of micellization due to the participation of SDS-PAMAM complex in the micelle formation. This behavior has not been observed for DTAB/12-2-12 in the presence of various generations of PAMAM. The results indicate that SDS always has stronger interactions with all the generations of PAMAM in comparison to those of DTAB and 12-2-12.     

Sodium dodecyl sulfate-poly(amidoamine) interactions studied by AFM imaging, conductivity, and Krafft temperature measurements

The conductivity, kappa, and Krafft temperature, TK, of sodium dodecyl sulfate (SDS) with poly(amidoamine) dendrimers (PAMAM) of 0.0, 0.5, and 1.0 generations (G) have been determined at different surfactant as well as PAMAM concentrations. The critical micelle concentration of SDS increases with the increase in the amount of each generation and the additive effect of 0.5G is maximum. TK of SDS shows a systematic decrease with maximum reduction in the presence of 0.5G. Atomic force microscopy (AFM) captures a layered pattern of 1.0G in the form of nanorods and no AFM images are detected for 1.0G in the presence of SDS. All results demonstrate that SDS has favorable interactions with ester-terminated 0.5G PAMAM rather than amine-terminated 0.0G and 1.0G.     

Interfacial and aggregation properties of some anionic/cationic surfactant binary systems II. Mixed micelle formation and surface tension reduction effectiveness

Mixed micelle formation and surface tension reduction effectiveness (γ_cmc) were investigated for the following systems: triethanolammonium dodecylpoly(oxyethylene)sulfate (TADPS, containing about two ethylene oxide units)/dodecyltrimethylammonium bromide, TADPS/hexadecyltrimethylammonium bromide and TADPS/hexadecylpyridinium chloride. For all these anionic/cationic systems, the mixed critical micelle concentration (cmc) values reflect a strong synergism in mixed micelle formation, with β^M values ranging from −13.8 to −18.3. The mixed micelle composition is mixing-ratio dependent and, for equimolar mixtures, the mixed micelle is richer in the surfactant with the lower cmc. Precipitation is inhibited to a certain extent, thanks to the presence of ethylene oxide groups in the anionic species. The conditions for synergism in γ_cmc, differently expressed in the literature, can be derived from the surface tension equations established in our previous article. They can be conveniently described by a few characteristic constants: Γ _i ^∞ (saturated Gibbs excess), K _i (constant in the Szyszkowski equation), the cmc of the individual surfactants and the interaction parameters, β^S and β^M, of their mixtures. Excellent agreement between theoretically predicted and experimental results is obtained. With the increase in surfactant chain length, the β^M values decrease faster than the β^S ones and this can result in the loss of synergism in γ_cmc. Received: 11 June 2000 Accepted: 4 September 2000     

Synthesis,surface activity,and corrosion inhibition of dentritic quaternary ammonium salt-type tetrameric surfactants

The dentritic quaternary ammonium salt-type tetrameric surfactant (4C₁₂tetraQ) was synthesized, and the molecular structure was confirmed by ¹H NMR and FTIR. The surface activity of 4C₁₂tetraQ was investigated by surface tension, and surface chemical parameters, such as critical micelle concentration (cmc), efficiency (pC₂₀), effectiveness (π_cmc), the surface tension value at cmc (γ_cmc), minimum surface area (A_min), maximum surface excess (Γ_max), and cmc/C₂₀ were obtained from the measurement results. The results show that the 4C₁₂tetraQ surfactant has higher surface activity than the traditional monomeric surfactants (dodecyl trimethyl ammonium bromide, DTAB). The Krafft points were taken as <0°C, indicating that the synthesized tetrameric surfactants had good water solubility. Free energies of micellization and adsorption show that 4C₁₂tetraQ display greater propensity to absorb at the interface than form micelle in the bulk of the aqueous solution, and that the two processes are spontaneous. The measurement results show that 4C₁₂tetraQ has good emulsification power and foam performance. The corrosion efficiency was evaluated with the loss weight method in 1?mol/L HCl solution, and the results show that the 4C₁₂tetraQ surfactant has good corrosion inhibition, and can be considered as a corrosion inhibitor.     

Enhanced interfacial properties of novel amino acid-derived surfactants: Effects of headgroup chemistry and of alkyl chain length and unsaturation

Amino acid-derived surfactants have increasingly become a viable biofriendly alternative to petrochemically based amphiphiles as speciality surfactants. Herein, the Krafft temperatures and critical micelle concentrations (cmc) of three series of novel amino acid-derived surfactants have been determined by differential scanning microcalorimetry and surface tension measurements, respectively. The compounds comprise cationic molecules based on serine and tyrosine headgroups and anionic ones based on 4-hydroxyproline headgroups, with varying chain lengths. A linear dependence of the logarithm of cmc on chain length is found for all series, and in comparison to conventional ionic surfactants of equal chain length, the new amphiphiles present lower cmc and lower surface tension at the cmc. These observations highlight their enhanced interfacial performance. For the 18-carbon serine-derived surfactant the effects of counterion change and of the presence of a cis-double bond in the alkyl chain have also been investigated. The overall results are discussed in terms of headgroup and alkyl chain effects on micellization, in the light of available data for conventional surfactants and other types of amino acid-based amphiphiles reported in the literature.     

Effect of head group size, temperature and counterion specificity on cationic micelles

The critical micelle concentration (cmc) and ionisation degree (α), of micelles of cetyltrimethylammonium bromide (CTABr), cetyltrimethylammonium chloride (CTACl), cetyltripropylammonium bromide (CTPABr) and cetyltripropylammonium chloride (CTPACl) have been measured over a narrow temperature range at 2 degree intervals using electrical conductivity. CTPACl and CTPABr are very soluble in water and were measured in the temperature range 275.15-323.15K. The Krafft temperatures for CTABr and for CTACl are 293.15K and 284.15K, respectively and established a lower temperature limit for our studies on these two surfactants. The cmc vs temperature curves have a smooth minimum near room temperature and α linearly increases with temperature. The changes of cmc and α with temperature are smaller than those associated with the modification of head group size or counterion nature. Using these results, basic thermodynamic quantities associated with the phenomena of micellization have been evaluated. Thermodynamic properties of the surfactant solutions were discussed in terms of temperature dependence of the free energy, enthalpy and entropy of micellization. A close similarity between the effects of change in temperature on protein folding and micellization process appears from the data.     

Supra-long chain surfactants with double or triple quaternary ammonium headgroups

Novel supra-long chain surfactants with double or triple quaternary ammonium salts (C(n)-2Am, C(n)-3Am, in which n represents a hydrocarbon chain length of 18, 20, and 22) were synthesized, and electrical conductivity and surface tension were used to characterize their properties depending on both the hydrocarbon chain length and number of hydrophilic groups. The Krafft temperatures decreased remarkably with an increase in the quaternary ammonium headgroups, resulting in a high solubility in water. The critical micelle concentration (cmc) increased with an increase in the number of quaternary ammonium moieties in the hydrophilic group, and the difference in the cmc was smaller for C(n)-2Am and C(n)-3Am than for C(n)-2Am and C(n)-Am of alkyltrimethylammonium bromide. The surface tension at the cmc was approximately 45 and 48 mN m(-1) for C(n)-2Am and C(n)-3Am with n=18-22, respectively. This indicated that the supra-long chain surfactants could not efficiently adsorb at the air/water interface and orient by themselves, as is known for conventional surfactants.     

新型脲基双子表面活性剂的合成及其性能

以N,N-二甲基-1,3-丙二胺、固体光气、溴代烷为原料合成了三种新型含脲基双子表面活性剂(LY-12、LY-14、LY-16),并通过1H NMR、ESI-MS和FT-IR表征了结构。测定了其Krafft点、乳化性能、起泡性能;通过测定表面张力γcmc以及不同温度下的临界胶束浓度(CMC)计算表面活性参数(Γmax、Amin、pc20)与热力学参数(ΔGmθ、ΔHmθ、ΔSmθ)。结果表明,LY-12、LY-14的Krafft点低于0℃,LY-16的Krafft点低于10℃;LY-12、LY-14、LY-16的乳化时间分别为173、275和338 s;LY-12的起泡性显著优于LY-14和LY-16;三种表面活性剂的表面张力γcmc分别为38. 77、37. 42和36. 59 m N/m;298. 15K条件下,其CMC值分别为0. 19、0. 15、0. 13 mmol/L。表面活性参数与热力学参数计算表明,三种表面活性剂均具有高的表面活性且胶束的形成是熵驱动的自发放热过程。     

Interaction between biosurfactant surfactin and cationic surfactant cetyl trimethyl ammonium bromide in mixed micelle

An anionic/cationic mixed surfactant aqueous system of surfactin and cetyl trimethyl ammonium bromide (CTAB) at different molar ratios was studied by surface tension and fluorescence methods (pH 8.0). Various parameters that included critical micelle concentration (cmc), micellar composition (X ₁), and interaction parameter (β ^m) as well as thermodynamic properties of mixed micelles were determined. The β ^m was found to be negative and the mixed system was found to have much lower cmc than pure surfactant systems. There exits synergism between anionic surfactin and cationic CTAB surfactants. The degree of participation of surfactin in the formation of mixed micelle changes with mixing ratio of the two surfactants. The results of aggregation number, fluorescence anisotropy, and viscosity indicate that more packed and larger aggregates were formed from mixed surfactants than unmixed, and the mixed system may be able to form vesicle spontaneously at high molar fraction of surfactin.     

Influence of β‐Cyclodextrin on the Mixed Micellization Process of Sodium Dodecyl Sulfate and Sodium Lauroyl Sarcosine and Formation of Inclusion Complexes

In this work, we have studied the influence of different concentrations of β‐Cyclodextrin (β‐CD) on the mixed micellization of anionic surfactants sodium dodecyl sulfate (SDS) and sodium lauroyl sarcosine (SLAS) at different SDS mole fractions (α_SDS). From conductivity data, the critical micellar concentration (cmc), the equivalent ionic conductivities of the monomeric species (Λ_m), the associated species (Λ_assc) and the micelle (Λ_mic), the degree of counterion dissociation (α) in the presence of β‐CD were evaluated from the slope of the conductivity versus concentration plots for the pure and binary mixtures. The apparent cmc of the surfactants vary linearly with the β‐CD concentrations. From the dependence of cmc of the surfactants on β‐CD concentration, we have deduced the association constant (K) of surfactant‐β‐CD inclusion complexes assuming 1∶1 stoichiometry. Theories of Clint, Regular solution, and Motomura's have been used for the evaluation of ideality or nonideality of the mixed system. Mixed micelles were found to be rich in SDS content at the cmc in the presence and the absence of β‐CD. The cmc values have been used to evaluate the transfer of standard free energy of micelles (ΔG⁰ _M,tr) from the aqueous medium to additive medium.