反相高效液相色谱法测定离子液体及其中的高沸点有机物

建立了反相键合相液相色谱分析离子液体咪唑类离子液体[bmim]PF6[、bmim]BF4、吡啶类离子液体[bupy]BF4的纯度及其中高沸点有机物的方法.以缓冲溶液控制流动相pH值,显著改善了峰形.保留时间定性,外标法定量.     

咪唑阴离子型碱性离子液体的合成及其催化Knoevenagel缩合反应

设计合成了由1-丁基-3-甲基咪唑阳离子与咪唑阴离子搭配的[bmim]Im新型碱性离子液体并对其碱性进行研究.[bmim]Im离子液体的碱性与[bmim]OH的碱性接近且强于[bmim]OAc.在水溶液及室温条件下,2%的[bmim]Im离子液体对系列芳香醛与活泼的亚甲基化合物之间的Knoevenagel缩合反应具有较好的催化性能,目标产物的收率达到86%～95%,选择性为100%.同时,该催化剂体系具有良好的循环性能.     

烷基咪唑型离子液体与牛血清白蛋白的相互作用研究

应用荧光光谱、紫外吸收光谱、傅立叶变换红外光谱和核磁共振波谱研究了烷基咪唑型离子液体[bmim][PF6]及其前体物质[bmim]Cl与牛血清白蛋白(BSA)分子间的相互作用.研究表明:在生理pH值条件下,[ bmim][ PF5]和[bmim] Cl均对BSA的内源性荧光产生猝灭,其猝灭程度[bmim][ PF6]＞...     

咪唑类离子液体中合成β-烯胺酮的研究

本文通过修饰阴阳离子合成了一系列咪唑型离子液体,以β-烯胺酮的合成为反应探针,考察离子液体结构和活性之间的关系。结果表明:阴阳离子对离子液体的活性都有显著的影响。阴离子为BF4-时,阳离子活性顺序为[Hmim]+[bmim]+,[emim]+[bmmim]+,其中[Hmim]BF4作反应介质,反应时间为10min,产率可达96%。当阳离子为[Hmim]+时,阴离子BF4-,Tsa-,Br-和NO3-活性均较高,产率达到93%以上,但阴离子HSO4-显著降低离子液体的活性,反应30min,产物收率仅有60%;阳离子为[bmim]+时,[bmim]Br[bmim]PF6[bmim]BF4,产率达到85%以上;而阴离子为HSO4-和H2PO4-时,离子液体活性变差,收率低于70%。离子液体[Hmim]BF4重复使用5次,β-烯胺酮产率基本不变,反应10min后,仍达89%。     

离子液体作为溶剂/催化剂用于卤代烃对胺的选择性烷基化反应

在三乙胺存在下,在离子液体([bmim]I和[bmim]PF6)中进行了各种卤代烃对胺类化合物中氨基的选择性烷基化反应.反应在相对温和的条件下进行,转化率和选择性优异.离子液体可以回收并重复使用.     

Pb^2+对核糖核酸酶活性及其结构的影响

通过各种光谱学手段研究了Pb^2+对核糖核酸酶活性的影响及其作用机制。结 果表明低浓度的Pb^2+可提高酶活性，高浓度则严重抑制酶活性，这是因为在高浓 度下Pb^2+能完全竞争出核糖核酸酶中的Ca^2+，荧光滴定显示核糖核酸酶可结合3 个Pb^2+。利用EXAFS表征出Pb^2+已结合到核糖核酸酶方链氨基酸残基上，与N或O 发生了配位，Pb-N(或O)键长分别为0.242nm和0.312nm，配位数均为2。圆二色谱测 试进一步表明高 浓度的Pb^2+结合使核糖核酸酶的二级结构遭到严重破坏，α－螺 旋含量、β－折叠及β－转角大量下降，无规则卷曲则明显增加。     

离子液体耦合有机过氧化物脱除二苯并噻吩的研究

以12-磷钨酸为催化剂,研究了离子液体耦合有机过氧化物脱除二苯并噻吩(DBT)。研究结果表明,单独使用离子[bmim]BF4、[bmim]PF6液体为萃取剂,脱硫率为27.78%~38.76%。以由等体积的H2O2与甲酸制成有机过氧化物为氧化剂,不使用催化剂和离子液体,温度70℃,反应时间6 h,DBT氧化为二苯并噻吩砜的比例为76.6%。在催化剂作用下,将离子液体与氧化剂耦合使用时,脱硫率明显提高。当催化剂与DBT的摩尔比为0.20∶1,氧化剂与DBT的体积比为10∶1,[bmim]PF6离子液体与DBT的体积比为1∶1,在70℃反应6 h后,脱硫率可达98.60%。耦合体系重复使用五次后,氧化脱硫活性没有明显降低。     

功能离子液体复合体系中钯催化的Heck偶联反应

在[BMIM][TPPMS]离子型膦配体和碱性离子液体 [BMIM][OAc] 组成的功能离子液体复合体系中, PdCl2(CH3CN)2可以有效地催化溴苯和丙烯酸乙酯的交叉偶联(Heck)反应, 产物肉桂酸乙酯(反式)的收率达到60%. 锚定在功能离子液体复合体系中的Pd催化剂循环使用11次后仍保持良好的活性和稳定性. 该催化剂体系的良好活性和稳定性可归因于三个方面: [BMIM][TPPMS]和[BMIM][OAc]间的协同配位效应; 以[BMIM][OAc]作为Heck反应的缚酸剂, 避免了无机盐粘稠物的形成; 生成的副产物[BMIM]Br可以有效溶解钯黑, 避免了钯黑的析出. 该离子液体催化体系对不同底物的Heck偶联反应也表现出良好的普适性.     

离子液体中卤素交换氟化合成七氟醚

在离子液体作为反应介质的条件下,以六氟异丙基氯甲基醚的氟代反应合成了七氟醚。 探讨了氟代反应机理,考察了[bpy]BF4、[bmim]BF4、[bepy]BF4、[bmim]PF6对反应产率的影响,研究了氟化剂、水和温度对反应产率的影响。 结果表明,以[bepy]BF4为反应介质,高比表面积的KF和微量的水有利于固态KF的部分离解进入有机相形成高活性的F-从而减少副产物,收率达到94.6%。 离子液体可重复使用3次以上,其活性没有明显下降。     

离子液体中β-葡萄糖苷酶生物催化合成红景天甙

比较了聚乙二醇修饰的β-葡萄糖苷酶在三种离子液体([bmim]PF6,[bmim]BF4,[bmim]Tf2N)及两种常用有机溶剂(1,4-二氧六环、正己烷)中的催化性能,确定了适宜的反应介质;考察了底物浓度、温度、体系含水量和反应时间等因素对β-葡萄糖苷酶催化合成红景天甙反应的影响.结果表明,在最佳反应介质[bmim...     

Enzymatic polyester synthesis in ionic liquids

The enzymatic synthesis of polyesters by ring-opening polymerization (ROP) and polycondensation in three ionic liquids, i.e., [bmim][Tf₂N], [bmim][PF₆] and [bmim][BF₄] was investigated. For the enzymatic ROP of ε-caprolactone it was found that [bmim][PF₆] and [bmim][BF₄] result in an inhomogeneous reaction mixture upon polymerization, causing polymerization characteristics similar to bulk polymerization. In contrast, for [bmim][Tf₂N] characteristics similar to toluene were observed. Molecular weights of 7000-9500 g/mol were obtained. In the polycondensation of dimethyl adipate and dimethyl sebacate, respectively, with 1,4-butanol the low volatility of ionic liquids was successfully utilized to perform the reactions in an open vessel at temperatures close to the boiling point of the condensation by-product. Molecular weights up to 5400 g/mol were obtained. This, in combination with the tunable solvent hydrophilicity of ionic liquids could offer an advantage in the polymerization of highly polar monomers with low solubility in organic solvents.     

Nucleophilicity in ionic liquids. 3. Anion effects on halide nucleophilicity in a series of 1-butyl-3-methylimidazolium ionic liquids

We have continued the study of halide nucleophilicity in ionic liquids, concentrating on the effect of changing the anion ([BF(4)](-), [PF(6)](-), [SbF(6)](-), [OTf](-), and [N(Tf)(2)](-)) when the cation is [bmim](+) (where bmim = 1-butyl-3-methylimidazolium). It was found that the nucleophilicities of all the halides were lower in all of the ionic liquids than in dichloromethane. Changing the anion affected the order of halide nucleophilicity, e.g., in [bmim][BF(4)] the order of nucleophilicity was Cl(-)>Br(-)>I(-) while in [bmim][N(Tf)(2)] the order was Cl(-)相似文献   

Bicyclic imidazolium-based ionic liquids: synthesis and characterization

We previously reported the use of imidazole as starting compound for preparing a bicyclic imidazolium ionic liquid, [b-3C-im][NTf₂], with an overall 29% isolated yield in four synthetic steps. This new room temperature ionic liquid was shown to be far more chemically stable than commonly used [bmim][PF₆], [bdmim][PF₆], and [bdmim][NTf₂]. Because of this intriguing chemical stability, it prompted us to develop a more generalized and high yielding synthesis so that molecular diversity of bicyclic ionic liquids may be explored. In this work, we amended the previous synthetic route by employing 4-chlorobutyronitrile or 5-chlorovaleronitrile as starting materials and successfully developed a five-step synthesis of a series of novel bicyclic imidazolium-based ionic liquids in 40-53% overall isolated yields. We investigated intrinsic reactivity of all bicyclic ionic liquids prepared and found that, under strongly basic conditions, among all tested ionic liquids the 5,5-membered [R-3C-im][NTf₂] ionic liquids were most stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] ionic liquid was 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. Under identical condition, the commonly used [bmim][NTf₂] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases, only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and all other ionic liquids gave no detectable exchanges even after 25 days at ambient temperature. Moreover, both [bmim][NTf₂] and [bdmim][NTf₂] ionic liquids were readily methylated at C-2 position with methyl iodide under basic condition at room temperature. Under the same condition, [R-3C-im][NTf₂] and [R-4C-im][NTf₂] ionic liquids were completely stable and chemically inert. We envisioned that [R-3C-im][NTf₂] should be well suited as solvents for organic synthesis.     

In situ crystallization of low-melting ionic liquids

Single crystals of five very low-melting ionic liquids, [emim]BF4 (mp -1.3 degrees C), [bmim]PF6 (+1.9 degrees C), [bmim]OTf (+6.7 degrees C), [hexpy]NTf2 (-3.6 degrees C), and [bmpyr]NTf2 (-10.8 degrees C), have been grown using a combined calorimetric and zone-melting approach and their crystal structures determined by X-ray diffraction.     

Speciation of uranyl complexes in ionic liquids by optical spectroscopy

Uranyl complexes dissolved in room-temperature ionic liquids have diagnostic absorption and emission spectra which reflect the molecular symmetry and geometry. In particular, the characteristic vibrational fine structure of the absorption spectra allows identification of the molecular symmetry of a uranyl complex. The concept of speciation of uranyl complexes is illustrated for the hydrated uranyl ion, the tetrachloro complex [UO2Cl4]2-, the trinitrato complex [UO2(NO3)3]-, the triacetato complex [UO2(CH3COO)3]-, and the crown ether complex [UO2(18-crown-6)]2+ in imidazolium and pyrrolidinium bis(trifluoromethylsulfonyl)imide ionic liquids. The competition between 18-crown-6 and small inorganic ligands for coordination to the uranyl ion was investigated. The crystal structures of the hydrolysis product [(UO2)2(mu2-OH)2(H2O)6] [UO2Br4](18-crown-6)4 and imidazolium salt [C6mim]2[UO2Br4] are described.     

分子模拟研究气体在室温离子液体中的溶解度

在作者先前建立的分子力场基础上, 采用Widom粒子插入法预测了CO₂、N₂、O₂、Ar及CH₄等5种气体在多种咪唑类离子液体中的溶解度, 包括2种侧链长度的阳离子和3种阴离子. 首先考察了256个离子对组成的体系中溶质分子插入次数对计算结果的影响, 在此基础上计算了不同温度下气体在1-丁基-3-甲基咪唑的四氟化硼盐([bmim][BF₄])和六氟化磷盐([bmim][PF₆])中的溶解度. 计算结果正确反映了CO₂气体溶解度的变化趋势, 在[bmim][BF₄]中溶解度的模拟结果与实验值符合很好, 且明显优于Pádua等的模拟结果；在[bmim][PF₆]中的溶解度较实验值偏高, 精度与文献模拟结果相当；并预测了较高温度下CO₂气体在[bmim][BF₄]和[bmim][PF₆]中的溶解度. 计算结果也正确地反映了5种气体在[bmim][PF₆]中溶解度实验值的相对大小. 另外考察了常温下几种气体在不同室温离子液体中的溶解度, 模拟结果表明气体在含有较长碳链和双-三氟甲基磺酰胺阴离子(Tf₂N^－)的离子液体中溶解度较大.     

Recyclable 2nd generation ionic liquids as green solvents for the oxidation of alcohols with hypervalent iodine reagents

Alcohols undergo smooth oxidation with iodoxybenzoic acid (IBX) or with Dess-Martin-Periodinane (DMP) in hydrophilic [bmim]BF₄ and hydrophobic [bmim]PF₆ ionic liquids at room temperature under mild conditions to afford the corresponding carbonyl compounds in excellent yields with high selectivity. IBX and DMP promoted oxidations are faster in ionic liquids when compared to conventional solvents such as DMSO, DMF, EtOAc and H₂O. The recovery of the byproduct iodosobenzoic acid (IBA) is especially simple in ionic liquids. The recovered ionic liquids can be recycled in subsequent reactions with consistent activity.     

Thermodynamic modeling of the phase behavior of binary systems of ionic liquids and carbon dioxide with the group contribution equation of state

The group contribution equation of state (GC-EOS) was applied to predict the phase behavior of binary systems of ionic liquids of the homologous families 1-alkyl-3-methylimidazolium hexafluorophosphate and tetrafluoroborate with CO2. Pure group parameters for the new ionic liquid functional groups [-mim][PF6] and [-mim][BF4] and interaction parameters between these groups and the paraffin (CH3, CH2) and CO2 groups were estimated. The GC-EOS extended with the new parameters was applied to predict high-pressure phase equilibria in binary mixtures of the ionic liquids [emim][PF6], [bmim][PF6], [hmim][PF6], [bmim][BF4], [hmim][BF4], and [omim][BF4] with CO2. The agreement between experimental and predicted bubble point data for the ionic liquids was excellent for pressures up to 20 MPa, and even for pressures up to about 100 MPa, the agreement was good. The results show the capability of the GC-EOS to describe phase equilibria of systems consisting of ionic liquids.     

Epoxidation of olefins catalyzed by manganese(III) porphyrin in a room temperature ionic liquid

The epoxidation of several alkenes catalyzed by (meso-tetrakis(pentafluorophenyl)porphinato) manganese(III) chloride (MnTFPPCl) was carried out in a 3:1 [bmim]PF₆ ionic liquid/CH₂Cl₂ mixed solvent. The conversion and the yield of epoxide are excellent. It was also found that [bis(acetoxy)iodo]benzene [PhI(OAc)₂] is a more efficient oxidant than PhIO. The catalyst in the ionic liquids can be recycled for several runs without substantial diminution in the catalytic activity.     

高活性离子液体-铑膦络合物体系催化1-己烯氢甲酰化反应

 The hydroformylation of 1-hexene catalyzed by rhodium-TPPTS complexes in the ionic liquid [bmim]BF4 was studied. The activity and selectivity of the rhodium-TPPTS complexes in [bmim]BF4 were much higher than those reported in other ionic liquids. The TOF of 1-hexene and selectivity for aldehyde were 1508 h-1 and 92%, respectively, under the optimum conditions. The high activity of the catalyst is ascribed to the absence of halide ions as well as the much higher solubility of hydrogen and rhodium-TPPTS complexes in [bmim]BF4 than in [bmim]PF6.