Cobalt(II) octacyanotungstate(V) organic-inorganic hybrid ferromagnetic materials with pyrazine and 4,4'-bipyridine

Two new ferromagnetic organic-inorganic hybrid materials [Co(II)3(H2O)6(pyz)3[W(V)(CN)8]2].3.5H2O (1) and [Co(II)3(H2O)4(4,4'-bpy)3[W(V)(CN)8]2].1.5(4,4'-bpy).6H2O (2) have been synthesised and characterised. The structure of the compounds have been investigated combining EXAFS (extended X-ray absorption fine structure), ES-MS (electrospray mass spectrometry), IR (infrared spectroscopy), UV-VIS electronic spectroscopy and TGA (thermogravimetric analysis) coupled with QMS (quadrupole mass spectrometer) experiments. The studies reveal that both compounds consist of Co(II)-NC-W(V) and Co(II)-L-Co(II) linkages (L = pyrazine (1) or 4,4-bipyridine (2)). Both networks are created by cyano-bridged Co(II)3W(V)2 chains joined by organic linkers into a 2D architecture. A difference of cobalt coordination numbers in both compounds derived from EXAFS study is consistent with the ES-MS conclusion. The ac magnetic characterisation exhibits the transition to the ferromagnetic phase at T(C) = 26 K (1) and to the spin glass-like phase at T(G) = 16 K (2). The frequency dependent chi'(T) and chi'(T) signals indicate the presence of some disorder in spin alignment below ordering temperatures. Both networks are also characterised a by magnetic hysteresis loop of coercive field H(c) = 750 Oe (1) and 1200 Oe (2) at T = 4.2 K.     

Functional-template directed self-assembly (FTDSA) of mesostructured organic-inorganic hybrid materials

Since the discovery of a surfactant directed self-assembly approach for the fabrication of mesoporous silica in 1992, increasing attention has been focused on the design and synthesis of mesostructured functional materials. Organic functionalization is becoming a major topic in this research field, since highly ordered mesostructured organic-inorganic hybrids offer novel functionalities and enhanced performance over their individual components. We begin with a brief overview of the three fundamental methods (post-synthetic grafting technique, co-condensation method, and preparation of periodic mesoporous organosilicas) for the preparation of organically functionalized mesostructured silica, and focus on one of the most promising approaches, which herein was named as functional-template directed self-assembly (FTDSA) approach, and in the eyes of the authors it has a special position in the preparation of this class of hybrid materials. A comprehensive overview of the state of research in the area of FTDSA and its potential applications will be given.     

The first synthesis of organic-inorganic hybrid materials with chiral bis(oxazoline) ligands

Condensation of tetraethoxysilane with silane-functionalized bis(oxazolines) in the presence of dodecylamine leads to hybrid materials whose textural and catalytic properties depend on both the ligand and the spacer structure.     

Molecular design of luminescent organic-inorganic hybrid materials activated by europium (III) ions

Luminescent hybrid materials consisting in rare-earth (Eu³⁺, Gd³⁺) organic complexes covalently attached to a silica-based network have been obtained by a sol–gel process. Four dicarboxylic acids with different aromatic subunits (dipicolinic acid, 4-phenyl-2,6-pyridinedicarboxylic acid, 4-(phenylethynyl)-2,6-pyridinedicarboxylic acid and 2,6-Bis(3-carboxy-1-pyrazolyl)pyridine) have been chosen as ligands for Ln³⁺ ions. They were grafted to 3-aminopropyltriethoxysilane (APTES) to give organically modified alkoxysilanes that were used as molecular precursors for the preparation of hybrid materials. Ln³⁺ first coordination sphere, composition of the siloxane matrix and connection between the organic and inorganic parts have been characterized by infrared spectroscopy, by ¹³C²⁹Si solid-state NMR as well as by elemental analyses. UV excitation in the organic component resulted in strong emission from Eu³⁺ ions due to an efficient ligand-to-metal energy transfer. As compared to reference organic molecules, hybrid samples exhibited similar emission properties under UV excitation in addition to mainly unchanged excited states lifetimes. However, by direct excitation of the Eu³⁺-⁵D₀ energy level, the presence of two different site distributions were evidenced in the four hybrid compounds. Emission features related to each of these site distributions and their respective attribution were investigated. Variations in the relative emission intensities were observed according to the nature of the organic chromophore. These variations were discussed in relation to the ATE (Absorption-Transfer-Emission) mechanism and to the relative energy positions of the ligand and the rare-earth ions respectively.     

Synthesis and characterization of organic-inorganic hybrid mesoporous silica materials with new templates

1-Hexadecane-3-methylimidazolium bromide and 1-hexadecane-2,3-dimethylimidazolium bromide were used as new templates for the syntheses of periodic mesoporous organosilica (PMO) materials; using these new templates, ethane-bridged PMO materials were successfully synthesized and characterized under basic conditions.     

Bulk weak ferromagnet in ferrimagnetic chains of organic-inorganic hybrid materials based on BDH-TTP and paramagnetic thiocyanato complex anions: (BDH-TTP)[M(isoq)(2)(NCS)(4)], M = Cr(III), Fe(III)

The preparation, X-ray crystal structures, and magnetic properties of two new isostructural charge transfer salts, (BDH-TTP)M(isoq)(2)(NCS)(4) (M = Cr(III) (1), Fe(III) (2), BDH-TTP = 2,5-bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene, isoq = isoquinoline), are reported. Crystal data for 1: monoclinic, space group C2/c (#15), a = 16.1363(9) A, b = 19.0874(12) A, c = 12.5075(6) A, beta = 95.70(4) degrees, V = 3833.2(4) A(3), Z = 4, R = 0.0516 for 2844 reflections with I > 2 sigma(I); for 2: monoclinic, C2/c (#15), a = 16.1938(8) A, b = 19.1117(11) A, c = 12.5100(10) A, beta = 94.265(3) degrees, V = 3861.0(4) A(3), Z = 4, R = 0.0479 for 2969 reflections with I > 2 sigma(I). The crystal structure consists of zigzag mixed organic and inorganic layers, and each layer is formed by mixed columns of BDH-TTP radical cations and paramagnetic metal complex anions. Short intermolecular atomic contacts between donor and anion are observed within the column in the c-direction. The two compounds have weak room-temperature electrical conductivities. ESR measurements show a single signal without separating the donor and anion spins, suggesting a pi interaction between the d and pi electrons. For both compounds ferrimagnetic interactions are observed between the nonequivalent donor and anion spins. These materials exhibit bulk canted weak ferromagnetism below 7.6 K for both 1 and 2.     

Hydrothermal synthesis of organic-inorganic hybrid materials: network structures of the bimetallic oxides [M(Hdpa)2V4O12] (M = Co, Ni, dpa = 4,4'-dipyridylamine)

The hydrothermal reactions of MCl(2).6H2O (M = Co, Ni) NaVO3, 4,4'-dipyridylamine (dpa), and H2O yield materials of the type [M(Hdpa)2V4O12] (M = Co (1), Ni (2)). The two-dimensional structures of 1 and 2 are constructed from bimetallic oxide networks (MV4O12)n2n- with monodentate Hdpa projecting the protonated ring into the interlamellar region. The oxide network may be described as ruffled chains of corner-sharing (VO4) tetrahedra linked by (NiO4N2) octahedra into the two-dimensional assembly. Crystal data: C10H10Co0.5N3O6V2(1), monoclinic P2(1)/c, a = 10.388(1) A, b = 7.6749(7) A, c = 16.702(2) A, beta = 102.516(1) degrees, Z = 4. C10H10N3Ni0.5O6V2 (2), monoclinic, P2(1)/c, c = 10.3815(2) A, b = 7.7044(2) A, c = 16.6638(4) A, beta = 102.573(1) degrees, Z = 4.     

Near-infrared luminescent hybrid materials doped with lanthanide (Ln) complexes (Ln = Nd, Yb) and their possible laser application

The crystal structures of ternary Ln(DBM)(3)phen complexes (DBM = dibenzoylmethane, phen = 1,10-phenanthroline, and Ln = Nd, Yb) and their in situ syntheses via the sol-gel process are reported. The properties of the Ln(DBM)(3)phen complexes and their corresponding Ln(3+)/DBM/phen-co-doped luminescent hybrid gels obtained via an in situ method (Ln-D-P gel) have been studied. The results reveal that the lanthanide complexes are successfully in situ synthesized in the corresponding Ln-D-P gels. Both Ln(DBM)(3)phen complexes and Ln-D-P gels display sensitized near-infrared (NIR) luminescence upon excitation at the maximum absorption of the ligands, which contributes to the efficient energy transfer from the ligands to the Ln(3+) ions (Ln = Nd, Yb), an antenna effect. The radiative properties of the Nd(3+) ion in a Nd-D-P gel are discussed using Judd-Ofelt analysis, which indicates that the (4)F(3/2) --> (4)I(11/2) transition of the Nd(3+) ion in the Nd-D-P gel can be considered as a possible laser transition.     

Synthesis and characterizations of anion exchange organic-inorganic hybrid materials based on poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)

A series of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)-based organic-inorganic hybrid materials for anion exchange were prepared through sol-gel process of polymer precursors PPO-Si(OCH₃)₃. PPO-Si(OCH₃)₃ were obtained from the reaction of bromomethylated PPO with 3-aminopropyl-trimethoxysilane (A1110). These polymer precursors then underwent hydrolysis and condensation with additional A1110 to generate hybrid materials. The reaction to produce polymer precursors was identified by FTIR; while FTIR, TGA, XRD, SEM, as well as conventional ion exchange capacity (IEC) measurements were conducted for the structures and properties of the prepared hybrids. TGA results show that this series of hybrid materials possess high thermal stability; XRD and SEM indicate that the prepared hybrid materials are amorphous and the inorganic and organic contents show good compatibility if the ratio between them is proper. The IEC values of the hybrid materials due to the amine groups range from 1.13 mmol/gBPPO (material i) to 4.80 mmol/gBPPO (material iv).     

Vapour pressure measurements on M(CO)5L (M = Cr,Mo, W; L = piperidine,pyridine, pyrazine,pyrazole, thiazole)

The vapour pressures and enthalpies of sublimation for a number of M(CO)₅L-complexes (M = Cr, Mo, W and L = piperidine, pyridine, pyrazine, pyrazole, thiazole) have been determined by the Knudsen effusion method. The results are compared with similar complexes and dipole moment measurements from the literature.     

Selective chemisorption of carbon monoxide by organic-inorganic hybrid materials incorporating cobalt(III) corroles as sensing components

Twenty-one hybrid materials incorporating cobalt(III) corrole complexes were synthesized by a sol-gel process or by grafting the metallocorrole onto a mesostructured silica of the SBA-15 type. All the materials show an almost infinite selectivity for carbon monoxide with respect to dinitrogen and dioxygen in the low-pressure domain where the chemisorption phenomenon is predominant. This peculiar property is of prime importance for an application as a CO sensor. The selectivity slightly decreases at high pressures where nonselective physisorption phenomena mainly occur. The percentage of active sites for CO chemisorption ranges from 22 to 64 %. This low percentage may be attributable to interactions between the cobalt(III) corroles with silanol or siloxane groups remaining at the surface of the materials which prevent further coordination of the CO molecule. Notably, the most efficient materials are those prepared in the presence of a protecting ligand (pyridine) during the gelation or the grafting process. The removal of this ligand after the gelation process releases a cavity around the cobalt ion that favors the coordination of a carbon monoxide molecule. The CO adsorption properties of the SBA-15 hybrid were not affected over a period of several months thus indicating a high stability of the material. Conversely, the xerogel capacities slowly decrease owing to the evolution of the material structure.     

Hydrothermal syntheses and structural characterizations of organic-inorganic hybrid materials of the M(II)-ligand/vanadium oxide system (M(II) = Mn(II), Cu(II) and Zn(II); ligand = 2,2'-bipyridine and 1,10-phenanthroline)

Three organic-inorganic hybrid compounds [Mn(bpy)V(bpy)V(3)O(11)] (bpy = 2,2'-bipyridine) (1), [Cu(bpy)V(2)O(6)] (2) and [Zn(phen)3][V(2)O(6)].10H(2)O (phen = 1,10-phenanthroline) (3) have been synthesized hydrothermally. Single crystal X-ray diffraction analyses revealed that compound 1 is the first example of bpy units coordinating to different transition metals in one molecule. Compound 2 is a new isomer of [Cu(bpy)V(2)O(6)] which was named the gamma-isomer by us. In compound 3, a 2-D water sheet with big holes filled by the "naked" [V(4)O(12)](4-) clusters is found.     

Hydrothermal syntheses and structural characterizations of organic-inorganic hybrid materials of the M(II)-ligand/vanadium oxide system (M(II) = Cu(II) and Zn(II); ligand = 2,2'-bipyridine and 2,2':6',2"-terpyridine)

Investigation into the incorporation of complex transition metal-organic units into vanadium oxide structures has resulted in the preparation of several novel composite materials. Hydrothermal reactions of V(2)O(5), 2,2'-bipyridine, an appropriate Zn or Cu starting material, and H(2)O under a variety of conditions yielded the organic-inorganic hybrid materials [[Zn(2,2'-bpy)](2)V(4)O(12)] (1) and [Cu(2,2'-bpy)V(4)O(10.5)] (2). Blocking an additional coordination site on the secondary metal center by using a tridentate organonitrogen ligand, 2,2':6',2' '-terpyridine in place of 2,2'-bipyridine, allowed the isolation of [Cu(terpy)V(2)O(6)] (3) and [[Zn(terpy)](2)V(6)O(17)] (4). The structure of 1 is a two-dimensional zinc vanadate layer, composed of rings containing four corner-sharing [VO(4)] vanadium(V) tetrahedra linked through six zinc square pyramids, with the 2,2'-bipyridine groups attached to the zinc centers and directed above and below the plane of the layer. In contrast to 1, the layer of 2 is based on a two-dimensional vanadium oxide substructure composed of vanadium(IV) square pyramids and vanadium(V) tetrahedra with copper square pyramids attached through corner-sharing interactions with vanadium tetrahedra such that the bipyridine ligands attached to the copper sites form staggered stacks above and below the plane of the layer. Compound 3 consists of one-dimensional vanadium oxide chains of corner-sharing tetrahedra linked through copper-terpyridine units into a two-dimensional bimetallic oxide of composition [CuV(2)O(6)], while the layer structure of 4 contains more complex one-dimensional vanadium oxide chains composed of fused rings of six corner-sharing vanadium oxide tetrahedra which are linked into a layer through [Zn(terpy)](2+) units.     

Synthesis, characterization, and photochromic properties of hybrid organic-inorganic materials based on molybdate, DABCO, and piperazine

Prompted by our interest in new photochromic organic-inorganic hybrid materials, the reactivity of [Mo7O24]6- toward a structure-directing reagent diamine such as 1,4-diazabicyclo[2.2.2]octane (DABCO) and piperazine (pipz) has been investigated, and three new molybdenum(VI)-containing compounds, namely, (H2DABCO)3[Mo7O24].4H2O (1), (H2DABCO)[Mo3O10].H2O (2), and (H2DABCO)2(NH4)2[Mo8O27].4H2O (3), have been synthesized and characterized. New synthetic routes to achieve the known compounds (H2DABCO)2(H2pipz)[Mo8O27] (4), (H2pipz)3[Mo8O27] (5), and (H2DABCO)2[Mo8O26].4H2O (6) are also reported. All of these compounds contain different poly(oxomolybdate) clusters, i.e., discrete [Mo7O24]6- blocks in 1, infinite polymeric chains 1/infinity[Mo3O10]2- in 2, 1/infinity[Mo8O27]6- in 3-5, and 1/infinity[Mo8O26]4- in 6, associated in a tridimensional assembly by hydrogen bonds with H2DABCO2+ and/or H2pipz2+ cations. Interconversion pathways and chemical factors affecting the stabilization of the different species are highlighted and discussed. At the opposite of 6, compounds 1-5 show photochromic behavior under UV excitation. Namely, compounds 1-5 shift from white or pale yellow to pale pink, reddish brown, or purple under UV illumination depending on the chemical nature of the mineral framework, with the kinetics of the color change being dictated by the nature of the organic component and by the organic-inorganic interface.     

Magnetic spongelike behavior of 3D ferrimagnetic {[Mn(II)(imH)]2[Nb(IV)(CN)8]}n with Tc = 62 K

Fully reversible room temperature dehydration of 3D {Mn(II)2(imH)2(H2O)4[Nb(IV)(CN)8] x 4 H2O}n (1; imH = imidazole) of Tc = 25 K results in the formation of 3D ferrimagnet {[Mn(II)(imH)]2[Nb(IV)(CN)8]}n (2), with Tc = 62 K, the highest ever known for octacyanometalate-based compounds. The dramatic magnetostructural modifications in 2 provide the first example of magnetic spongelike behavior in an octacyanometallate-based assembly.     

Long-range ferromagnetic ordering in two-dimensional coordination polymers Co[N(CN)2]2(L) [L = pyrazine dioxide (pzdo) and 2-methyl pyrazine dioxide (mpdo)] with dual mu- and mu3-[N(CN)2] bridges

Two novel coordination polymers of Co(II) with dicyanamide (dca) were obtained by the addition of ancillary ligands of pyrazine dioxide (pzdo) and 2-methyl pyrazine dioxide (mpdo) into the Co-dca binary system, respectively. Co[N(CN)(2)](2)(pzdo) (1) crystallizes in the orthorhombic space group of Pnnm (No. 58) with a = 9.4699(5) A, b = 14.9984(3) A, c = 7.4313(7) A, and Z = 4, while Co[N(CN)(2)](2)(mpdo) (2) is in the monoclinic space group C2 (No. 5) with a = 16.5391(4) A, b = 9.6065(2) A, c = 7.5001(2) A, beta = 105.779(1) degrees, and Z = 4. Both complexes contain similar two-dimensional triangular Co-dca layers, which offer rare examples of mixed 1,5-mu- and mu(3)-dca bridging coordination polymers with long-range ferromagnetic ordering below ca. 2.5 K.     

Indium(III) one-dimensional polymers with pyrazine and pyrazine, 2-carboxylic acid as the spacer molecules

The reactions of indium(III) chloride tetrahydrate with pyrazine (C₄H₄N₂) and pyrazine, 2-carboxylic acid afford two polymeric frameworks, the structures of which were characterized in the solid state by single crystal analysis. The former is a one-dimensional infinite structure interlinked by the pyrazine spacer, while the latter is a one-dimensional ‘zigzag’ polymeric structure. A dimeric indium(III) pyrazine complex is also reported.     

Three iodometalate organic-inorganic hybrid materials based on methylene blue cation: Syntheses,structures, properties and DFT calculations

The functional dye of methylene blue (MB) has been employed for seeking new organic–inorganic hybrid photochromic materials. Although the photochromism has not been observed yet, three iodometalate compounds, namely (MB) (PbI₃) (DMF) (1), (MB)₄(Cu₂I₄)₂ (2), and (MB)₃(Bi₂I₉) (DMF)₂ (3), have been synthesized and characterized. The iodometalate anion features as a [PbI₃]_∞⁻ chain in 1, a dinuclear unit of Cu₂I₄^2- in 2, and a dinuclear unit of Bi₂I₉³⁻ in 3. Due to the synergy of cations and anions, the MB⁺ cations present supramolecular column stacks in 1 and 3, but a novel supramolecular octamer structure in 2. Their thermogravimetric analyses reveal that the polymeric inorganic anion structure is helpful to increase the stability of cation whereas the discrete structure is adverse. For seeking some clues which is significant to searching new photochromic systems, the density functional theory (DFT) studies have been performed on 1, in which the electronic structure analyses suggests that the stacking mode of cations and anions could be also an important factor influencing the charge transfer between them. In addition, dielectric hysteresis loop testing has been performed on 1 due to its polar space group of Cc.     

Octahedral Ru(II) amido complexes TpRu(L)(L')(NHR) (Tp = hydridotris(pyrazolyl)borate; L = L' = P(OMe)3 or PMe3 or L = CO and L' = PPh3; R = H,Ph, or tBu): synthesis,characterization, and reactions with weakly acidic C-H bonds

The octahedral Ru(II) amine complexes [TpRu(L)(L')(NH(2)R)][OTf] (L = L' = PMe(3), P(OMe)(3) or L = CO and L' = PPh(3); R = H or (t)Bu) have been synthesized and characterized. Deprotonation of the amine complexes [TpRu(L)(L')(NH(3))][OTf] or [TpRu(PMe(3))(2)(NH(2)(t)Bu)][OTf] yields the Ru(II) amido complexes TpRu(L)(L')(NH(2)) and TpRu(PMe(3))(2)(NH(t)Bu). Reactions of the parent amido complexes or TpRu(PMe(3))(2)(NH(t)Bu) with phenylacetylene at room temperature result in immediate deprotonation to form ruthenium-amine/phenylacetylide ion pairs, and heating a benzene solution of the [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] ion pair results in the formation of the Ru(II) phenylacetylide complex TpRu(PMe(3))(2)(C[triple bond]CPh) in >90% yield. The observation that [TpRu(PMe(3))(2)(NH(2)(t)Bu)][PhC(2)] converts to the Ru(II) acetylide with good yield while heating the ion pairs [TpRu(L)(L')(NH(3))][PhC(2)] yields multiple products is attributed to reluctant dissociation of ammonia compared with the (t)butylamine ligand (i.e., different rates for acetylide/amine exchange). These results are consistent with ligand exchange reactions of Ru(II) amine complexes [TpRu(PMe(3))(2)(NH(2)R)][OTf] (R = H or (t)Bu) with acetonitrile. The previously reported phenyl amido complexes TpRuL(2)(NHPh) [L = PMe(3) or P(OMe)(3)] react with 10 equiv of phenylacetylene at elevated temperature to produce Ru(II) acetylide complexes TpRuL(2)(C[triple bond]CPh) in quantitative yields. Kinetic studies indicate that the reaction of TpRu(PMe(3))(2)(NHPh) with phenylacetylene occurs via a pathway that involves TpRu(PMe(3))(2)(OTf) or [TpRu(PMe(3))(2)(NH(2)Ph)][OTf] as catalyst. Reactions of 1,4-cyclohexadiene with the Ru(II) amido complexes TpRu(L)(L')(NH(2)) (L = L' = PMe(3) or L = CO and L' = PPh(3)) or TpRu(PMe(3))(2)(NH(t)Bu) at elevated temperatures result in the formation of benzene and Ru hydride complexes. TpRu(PMe(3))(2)(H), [Tp(PMe(3))(2)Ru[double bond]C[double bond]C(H)Ph][OTf], [Tp(PMe(3))(2)Ru=C(CH(2)Ph)[N(H)Ph]][OTf], and [TpRu(PMe(3))(3)][OTf] have been independently prepared and characterized. Results from solid-state X-ray diffraction studies of the complexes [TpRu(CO)(PPh(3))(NH(3))][OTf], [TpRu(PMe(3))(2)(NH(3))][OTf], and TpRu(CO)(PPh(3))(C[triple bond]CPh) are reported.     

Acetylacetone, an interesting anchoring group for ZnO-based organic-inorganic hybrid materials: a combined experimental and theoretical study

Acetylacetone (acacH) adsorption on ZnO (10-10) surface has been studied by a theoretical periodic approach using density functional theory. Two dissociative adsorption modes were investigated and compared to the most stable adsorption mode of formic acid. Acetylacetone appears as a suitable anchoring group for hybrid materials, with adsorption energies of the same order of magnitude as formic acid. IR spectra of the acac/ZnO systems were computed in order to determine the spectral signature of adsorption and, possibly, of each adsorption mode to follow the coordination of acac on ZnO at the experimental level. The results have been compared to Fourier transform infrared (attenuated total reflection-IR) experimental spectra. The present investigation points out the interest of acetylacetone as an anchoring group for the development of new ZnO-based functionalized hybrid layers for corrosion protection, light emitting diodes, photocatalytic systems, and dye-sensitized solar cells.