Solid-phase reagent containing the 3,5-dinitrophenyl tag for the improved derivatization of chiral and achiral amines, amino alcohols and amino acids in high-performance liquid chromatography with ultraviolet detection

A solid-phase reaction technique is described for improved derivatization of aliphatic amines, amino alcohols and amino acids. A polymeric activated ester is used for the immobilization of the 3,5-dinitrobenzoyl group, which can then be used for derivatizations of strong or weak nucleophiles, while avoiding solution-phase derivatization conditions. The reagent is easily prepared and can be regenerated after use to attain its original reactivity. The resulting chromatograms are free of system peaks due to excess derivatizing reagent, and sample handling is kept to a minimum. The reagent can be used in conjunction with both reversed- and normal-phase chromatography and can be used for off-line gas chromatographic or high-performance liquid chromatographic (HPLC) derivatizations. In addition, the reagent can be used on-line for derivatization in HPLC. Since the labelling reagent is a strong pi-acid, chiral substrates can be derivatized and separated on a Pirkle-type pi-donor column. The confirmation and quantitation of amphetamine in urine was accomplished using a polymer containing two labelling moieties, p-nitrobenzoyl and 3,5-dinitrobenzoyl. The derivatization and separation of chiral and achiral amines, amino alcohols and amino acids is described.     

Selective determination of trimethylamine in air by liquid chromatography using solid phase extraction cartridges for sampling

The selective determination of trimethylamine (TMA) in air by liquid chromatography is reported. Sampling is effected by flushing air through C18-packed solid-phase extraction (SPE) cartridges at a flow rate of 15 mL/min for 15 min. Next, TMA is desorbed from the cartridges and injected into the chromatographic system. The analyte is then selectively retained on a precolumn (20 mm x 2.1 mm i.d., packed with 30 microm, Hypersil C18 phase), and derivatized on-line by injecting 9-fluorenylmethyl chloroformate (FMOC). Finally, the TMA-FMOC derivative is transferred to the analytical column (125 mm x 4 mm i.d., LiChrospher 100 RP18, 5 microm), and monitored at 262 nm. The method was applied to the measurement of TMA in air in the 0.25-2.5 microg interval (equivalent to concentrations of TMA of 1.1-11 mg/m3), providing good linearity, reproducibility and accuracy. The mean recovery of TMA was (96 +/- 7%) (n = 12), and the limit of detection was 0.05 microg. The proposed procedure allows the selective determination of TMA in the presence of other primary and secondary short-chain aliphatic amines.     

Miniaturization of solid-phase reactors for on-line post-column derivatization in narrow-bore liquid chromatography

Summary The use of solid-phase reactors for post-column derivatization in narrow-bore HPLC (1.0mm i.d. analytical columns) is evaluated. Two systems are described, viz. for the determination of N-methylcarbamate pesticides and for that of urea and ammonia. The solid-phase reactor is packed with a strong anion exchange resin and urease immobilized on silica, respectively, to effect the catalytic hydrolysis of the solutes eluting from the analytical column. In both systems, the hydrolysis product is reacted with o-phthalaldehyde followed by fluorescence monitoring. Analytical data are presented and band broadening from various parts of the reaction detector system is discussed. An on-line trace enrichment procedure via a micro precolumn is descried for the trace level determination of N-methylcaramates in surface water samples.     

Liquid chromatographic determination of trimethylamine in water

A method for the selective determination of trimethylamine (TMA) in aqueous matrices by liquid chromatography is reported. The proposed procedure is based on the derivatization of the analyte with 9-fluorenylmethyl chloroformate (FMOC) in a precolumn (Hypersil C18, 30 microm, 20 mm x 2.1 mm i.d.) connected on-line to the analytical column (LiChrosphere 100 RP18, 5 microm, 125 mm x 4 mm i.d.). Gradient elution was performed with a mixture of acetonitrile-water-0.05 M borate buffer (pH 9.0). The method has been applied to the direct determination of TMA in water within the 0.25-10.0 microg/ml concentration interval, and can also be adapted to the determination of TMA over the range 0.05-1.0 microg/ml by incorporating a preconcentration stage with C18 solid-phase extraction (SPE) cartridges. Good linearity, reproducibility and accuracy was achieved within the tested concentration intervals. The limits of detection at 262 nm were 50 and 5 ng/ml for the direct method and for the method involving preconcentration, respectively. The proposed conditions allowed the selective determination of TMA in the presence of other primary and secondary short-chain aliphatic amines. The utility of the described procedure has been tested by determining TMA in different water samples.     

Quantification of biogenic amines in human plasma based on the derivatization with N-hydroxy-succinimidyl fluorescein-O-acetate by high-performance liquid chromatography

An HPLC method for the determination of biogenic amines based on the precolumn derivatization with N-hydroxysuccinimidyl fluorescein-O-acetate (SIFA) has been developed. The derivatization was performed at 45 degrees C for 30 min in borate buffer (pH 8.0). The derivatives were separated on a ZORBAX Eclipse XDB-C8 column (150 mm x 4.6 mm id; 5 mum) and monitored by fluorescence detection (excitation, 469 nm; emission, 512 nm). The LODs (S/N = 3) for spermine, spermidine, putrescine, cadaverine, and phenethylamine were 0.4, 0.2, 0.3, 0.5, and 0.4 nM, respectively. The developed method has been successfully applied to the determination of biogenic amines in human plasma of three healthy volunteers and four cancer patients. Average recoveries for plasma samples ranged from 94 to 106% and coefficients of variation ranged from 1.8 to 4.6%. Deproteinization of plasma was accomplished with ACN to precipitate interfering substances and the centrifuged supernatant was used directly for analysis.     

New polymeric benzotriazole reagents for off-line derivatizations of amines and polyamines in HPLC

New polymeric reagents are synthesized, based on a polystyrene-bound benzotriazole containing an o-acetylsalicyl or 9-fluorenyl labelling moiety. This is used in an off-line mode, prior to high performance liquid chromatography (HPLC), for derivatizations of trace primary and secondary amines, polyamines, and related compounds in connection with HPLC. Standards are prepared, characterized by physical and spectral properties, and then used as external standards to determine percent derivatizations. The polymeric reagents are characterized by elemental analyses and loading determinations. The feasibility and applicability of this reagent for derivatization of nucleophiles is confirmed with a number of amines under optimized conditions. The activated labelling moiety, bonded to the polymeric support, makes the derivatization reactions extremely rapid and efficient under mild reaction conditions. This alone provides significant advantages over the analogous solution derivatizations for the same amines. A comparison of solution and solid phase derivatization reactions is reported. The limits of detection are 1 to 2 pmol for polyamines, such as cadaverine, putrescine, and 1,7-diaminoheptane, using the benzotriazole fluorenyl reagent followed by fluorescence detection.     

High-performance liquid chromatographic determination of peptides in biological fluids by automated pre-column fluorescence derivatization with fluorescamine

Peptides containing a free alpha- or epsilon-amino group react with fluorescamine under mild alkaline conditions to generate a highly fluorescent but unstable reaction product and, consequently, practical high-performance liquid chromatographic (HPLC) approaches to analysis have typically involved the use of postcolumn derivatization. An automated precolumn approach is reported in which peptides are reacted with fluorescamine just prior to HPLC analysis by a commercially available autoinjector with derivatization capabilities. The autoinjector added base and fluorescamine reagent solutions to a sample vial containing peptide analytes, and the derivatization reaction was allowed to proceed for 5 min at room temperature prior to injection into the HPLC system. The derivatized peptides were analyzed by reversed-phase HPLC with fluorescence detection (excitation at 390 nm; emission 470-nm cut-off filter) on an octylsilica column. Optimization of the precolumn reaction conditions and the use of narrower HPLC columns (2 mm I.D.) resulted in a typical on-column detection limit of 30-50 fmol of peptide, which was substantially lower than that in previously reported post-column methods. This approach was applied to the HPLC of several naturally occurring and synthetic peptides containing alpha- and epsilon-amino groups. In combination with solid-phase extraction, prior to automated precolumn fluorescence derivatization and chromatographic analysis, the methodology was used for the determination of a synthetic growth hormone-releasing peptide in plasma samples.     

Determination of aldehydes and ketones in natural gas combustion in the ppb range by high-performance liquid chromatography

Summary The reported identification and determination of trace compounds in flue products of natural gas burning equipment is based on DNPH precolumn derivatization and followed by HPLC separation. The optimized HPLC analysis has been applied to the determination of trace amounts of aldehydes and ketones in polluted air such as lab and ambient air as well as natural gas and oil combustion products in a hospital. The results obtained in a hospital show that the oil fuel combustion process emits a considerable amount of toxic acrolein, whereas the emission of acetone is predominant in natural gas combustion.

---

Bestimmung von Aldehyden und Ketonen bei der Erdgasverbrennung im ppb-Bereich mittels HPLC

     

Determination of biogenic amines in HeLa cell lysate by 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein and micellar electrokinetic capillary chromatography with laser-induced fluorescence detection

An MEKC-LIF method using 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxy-carbonyl) fluorescein (SAMF) newly synthesized in our lab as a labeling reagent for the separation and determination of eight typical biogenic amines was proposed. After careful study of the derivatization condition such as pH value, reagent concentration, temperature, and reaction time, derivatization reaction was accomplished as quickly as 10 min with stable yield. Optimal separation of SAMF-labeled amines was achieved with a running buffer (pH 9.3) containing 30 mM boric acid, 25 mM SDS, and 20% v/v ACN. The proposed method allowed biogenic amines to be determined with LODs as low as 0.25-2.5 nmol/L and RSD values from 0.4 to 4.5%. The present method has been successfully used to monitor biogenic amines in HeLa cells and fish samples. This study exploits the potential of MEKC-LIF with SAMF labeling as a tool for monitoring biogenic amines involved in complex physiological and behavioral processes in various matrices.     

Analysis of methylamine by solid-phase microextraction and HPLC after on-fibre derivatization with 9-fluorenylmethyl chloroformate

A method for the determination of methylamine (MA) in aqueous matrices is reported which uses solid-phase microextraction (SPME) for enrichment and derivatization of the analyte, and high performance liquid chromatography (HPLC). The fluorogenic reagent 9-fluorenylmethyl chloroformate (FMOC) has been used for derivatization. The SPME fibres were successively immersed in the samples and in the derivatization solutions to extract MA and FMOC, respectively. After a defined time of reaction, the derivatized analyte was desorbed into the chromatographic system, and chromatographed in a LiChrosphere 100 RP18, i.d., 5 μm, column under gradient elution. In order to improve the MA-FMOC peak profile, a precolumn ( i.d., packed with Hypersil C₁₈ phase, 30 μm) was connected on-line to the analytical column by means of a switching valve. The experimental conditions (including fibre coating, times of adsorption, reaction and desorption, and concentration of reagent) have been optimised, and the results have been compared with those achieved by using a method previously validated for aliphatic amines in which extraction and derivatization were carried into C₁₈ solid-phase extraction (SPE) cartridges. Although less sensitive, the SPME based method allowed the quantification of MA over the range 2.5-10.0 μg/ml with linearity, reproducibility and accuracy comparable to that of the SPE based method, the limit of detection being 0.75 μg/ml. The main advantages of the proposed SPME procedure are: sample handling involved in the extraction and derivatization steps was considerably reduced, it was free organic solvent and non-destructive. Moreover, the proposed conditions allowed the selective determination of MA in the presence of other primary and secondary short-chain aliphatic amines. The utility of the proposed procedure for the quantification of MA in different types of waters is discussed.     

Sensitive determination of anandamide in rat brain utilizing a coupled-column HPLC with fluorimetric detection

A fluorimetric determination method for N-arachidonoylethanolamine (anandamide) was developed using a precolumn fluorescence derivatization followed by coupled-column high-performance liquid chromatography (HPLC). Anandamide extracted from the rat brain tissue was derivatized with 4-N-chloroformylmethyl-N-methylamino-7-N, N-dimethylaminosulfonyl-2,1,3-benzoxadiazole (DBD-COCl), purified by a solid-phase extraction (Emporetrade mark), and assayed by the coupled-column HPLC. The HPLC consisted of phenyl (100 x 4.6 mm i.d. ) and octadecylsilica columns (250 x 4.6 mm i.d.), both connected by a six-port valve. The concentration of anandamide in rat brain was 3. 37 +/- 0.73 pmol/g with 6.47 and 3.57% of intra- and inter-day precisions, respectively. Using this method, we investigated the alteration of anandamide concentration in rat brain 30 min after administration of anandamide (2 mg/kg, i.p.) to rats pretreated with or without phenylmethylsulfonyl fluoride (PMSF; 30 mg/kg, i.p.), an inhibitor of amidohydrolase. In rats pretreated with PMSF, the brain concentration of anandamide was approx. 16-fold higher than that of rats without PMSF (p < 0.01).     

Precolumn derivatization with glyoxal as a new approach to the highly sensitive HPLC-UV determination of unsymmetrical dimethylhydrazine

A procedure has been developed for the determination of unsymmetrical dimethylhydrazine (UDMH) based on precolumn derivatization with glyoxal and determination of the produced derivative, mono-1,1-dimethylhydrazone of glyoxal, by reversed-phase HPLC (RP-HPLC) with UV detection at 305 nm. It has been demonstrated that the reaction of UDMH with an excess of glyoxal in solution quantitatively yields one stable product within 20 min at 25°C at pH 3.5. To increase the sensitivity of UDMH determination it has been proposed to perform solid-phase extraction preconcentration of the derivative from a 25-mL sample portion on cartridges containing Strata SDB-L polymer adsorbent. The analytical range of UDMH determination in water is 0.5–10000 μg/L or 0.01–20 μg/L using preconcentration. The relative standard deviations of UDMH determination (n = 3) do not exceed 0.12 and 0.25 without and with preconcentration, respectively. The accuracy of UDMH determination is confirmed by the analysis of spiked samples and by RP-HPLC determination with preliminary derivatization with 4-nitrobenzaldehyde as independent method.     

Determination of quinolones and fluoroquinolones in hospital sewage water by off-line and on-line solid-phase extraction procedures coupled to HPLC-UV

In this work, the development of two solid-phase extraction procedures (off-line and on-line formats) for the identification and quantification of several (fluoro)quinolones in hospital sewage water by HPLC-UV is described. Both procedures are based on the use of C18 and anion exchange (SAX) sorbents for the preconcentration and clean-up steps, respectively, and all variables influencing both steps were optimised. In the off-line format, after its pH was adjusted to 2.5, sample was preconcentrated on a C18 cartridge and eluted with 4 mL of methanol/ammonia (94/6). The methanolic extract must be diluted up to 10 mL with water to allow quantitative retention of the analytes on the SAX cartridge. In the on-line format, the addition of 2.5% of NH4Cl to the sewage water sample (pH = 2.5) was necessary to increase the breakthrough volumes of the analytes in the C18 precolumn. Quantitative transfer of the (fluoro)quinolones from the C18 precolumn to the SAX precolumn was accomplished by pumping 2 mL of a mixture methanol/water (40/60, pH = 9.2) at 2 mL min(-1). Elution of the analytes from the SAX precolumn by means of the chromatographic mobile phase required the inclusion of an additional isocratic step at the beginning of the gradient program. Both off-line and on-line solid phase extraction procedures coupled to HPLC-UV were applied to the analysis of a sewage water sample collected in the sewer system at the output of the St Dimphna Hospital (Geel, Belgium). The fluoroquinolone ciprofloxacin was found in this sample and quantified at 5.8 +/- 0.4 microg L(-1) (off-line method) and 5.6 +/- 0.5 microg L(-1) (on-line method). The analysis of spiked samples containing the seven (fluoro)quinolones studied provided quantitative recoveries in all cases with low RSD values (from 6 to 12%), and all the analytes could be identified by means of their UV spectra with match factors varying from 950 to 985 depending on the (fluoro)quinolone.     

Determination of aliphatic amines in water by liquid chromatography using solid-phase extraction cartridges for preconcentration and derivatization.

Bond Elut C18 solid-phase extraction cartridges were used for preconcentration and pre-column derivatization with 3,5-dinitrobenzoyl chloride (DNB) of aliphatic amines in water. Conditions for analyte preconcentration and derivatization (including the volume of sample, concentration of reagent, time of reaction and pH) were investigated, using ethylamine, isopropylamine and dimethylamine as model compounds. On the basis of these studies, a rapid and sensitive method for the determination of aliphatic amines in water is presented. The analytes are retained and purified on the cartridges and then derivatized and desorbed by drawing in succession the DNB solution and acetonitrile. The collected extracts are subsequently chromatographed in a Hypersil ODS C18 column using acetonitrile-water for elution. The DNB derivatives are monitored at 230 nm. The method provides satisfactory reproducibility and linearity within the 0.050-1.0 mg l(-1) concentration interval, the limits of detection being 2-5 microg l(-1). Analyte recoveries were in the 70-102% range, whereas the conversion yields compared with those observed for the solution derivatization were in the 79-107% range. The total analysis time (sample treatment plus chromatography) was about 15 min. The method was applied to the determination of ethylamine, isopropylamine and dimethylamine in tap and river waters.     

在线自动化柱前衍生-高效液相色谱法测定食品中组胺的研究

建立了在线自动化柱前衍生.高效液相色谱法测定食品中组胺的新方法.通过对测定过程中各个影响因素进行优化,如自动化衍生程序的设定,衍生试剂的用量,衍生体系pH影响等,确立了适宜的测定条件.在该条件下,对于组胺的检出限为0.01 μg/mL,在0.05～100 λg/mL范围内,线性关系良好(r2＞0.999).通过对样品基质进行加标,检出限为0.20 mg/kg.将所建立的方法应用于金枪鱼罐头,烟熏鲣鱼,冻鲭鱼等样品中组胺的测定,测得的组胺含量为0.59～167 mg/kg,加标回收率均大于97%,测定值的相对标准偏差均小于5%.所建立的方法适用于大量样品的常规分析测定.     

A new on-line sample preparation system for the liquid chromatography/time-of-flight mass spectrometry simultaneous analysis of pesticides in river water.

Current on-line solid-phase extraction methods combined with HPLC for shortening the clean-up operation are not suitable for simultaneously detecting compounds that have a wide variety of hydrophobicities. To solve these problems, we designed a new on-line sample preparation system. The system consists of an eluting pump, a mixing TEE connector, a 10-port 2-position valve and a solid-phase extraction precolumn. The eluate from the precolumn is diluted with a weak solvent from the HPLC at the TEE connection to load low hydrophobic compounds onto the analytical column. The proposed on-line sample preparation system was successfully applied to the simultaneous analysis of 21 pesticides in river water using LC/TOF-MS. In this method, the recoveries from river water samples were 67 to 126% (mean 83%), the reproducibility (CV%) was in the range from 1.1 to 11% (mean 5.6%), the calibration curve was linear in the range from 1 ppb to 500 ppb (r > 0.999) and the detection limits (S/N = 3) were in the range from 0.0034 ppb (daimuron) to 3.3 ppb (oxine-copper).     

Determination of urinary free cortisol by high performance liquid chromatography with sulphuric acid-ethanol derivatization and column switching.

A rapid and highly sensitive determination method for urinary free cortisol has been developed using reversed phase high performance liquid chromatography (HPLC) with a precolumn for sulphuric acid-ethanol fluorescence derivatization and column switching. Urinary cortisol, eluted from the octadecylsilane-bonded silica (ODS) minicolumn with 90% aqueous ethanol, was derivatized with the addition of sulphuric acid only at ambient temperature. Cortisol derivatives injected directly onto the ODS precolumn were purified on-line. After switching the columns, the cortisol derivative was separated on an ODS analytical column with a retention time of 15.3 min and monitored at an emission wavelength of 520 nm (exitation wavelength of 365 nm) to decrease the detection limit to 0.26 microgram/dL (signal-to-noise ratio = 3). The automated HPLC operation resulted in good reproducibility and recovery of the stable cortisol derivative at 5 degrees C.     

HPLC post column derivatization of aromatic amines usingN-methyl-9-chloroacridinium triflate

An HPLC post column chemical derivatization procedure based on the interaction between an acridinium triflate and amines to form highly colored derivatives on-line is described for the determination of aromatic amines. Benzocaine and butesin, local anesthetic agents that contain the aromatic amine group, were used as model compounds. Reversed-phase HPLC conditions were developed for both the separation of analytes and the reaction between analytes and the acridinium triflate in the system. Three-dimensional knitted teflon shape coils and the internal diameter and length of the coils were important parameters in reducing band broadening and background noise.N-Methyl-9-chloroacridinium triflate was shown to be applicable to the determination of primary aromatic amines, selected secondary aromatic amines, hydrazides, and hydrazines. Application of the on-line chemical derivatization procedure to the analysis of pharmaceutical dosage forms containing procainamide (primary aromatic amine), isoniazid (hydrazide), and hydralazine (hydrazine) is also described.     

Application of matrix solid-phase dispersion and high-performance liquid chromatography for determination of sulfonamides in honey

A novel method for simultaneous determination of 8 sulfonamide residues (sulfathiazole, sulfapyridine, sulfadiazine, sulfamerazine, sulfamonome-thoxine, sulfachloropyridazine, sulfamethoxazole, and sulfadimethoxine) in honey samples by high-performance liquid chromatography (HPLC) has been developed on the basis of precolumn derivatization with 9-fluorenylmethyl-chloroformate (FMOC-Cl). Sulfonamide residues in honey samples were extracted and purified by matrix solid-phase dispersion with C18 as the solid support. The residues were derivatized by FMOC-CI, and the FMOC-sulfonamide derivatives were further purified by solid-phase extraction with silica gel as the solid support prior to HPLC analysis. The average recoveries for most sulfonamide compounds at different spiking levels (from 10 to 250 microg/kg) were > 70% with relative standard deviations < 16%, and their limits of detection were 4.0 microg/kg. The established analytical method has high sensitivity and repeatability and can be applicable for determining the sulfonamide residues in various honey matrixes.     

Reversed-phase HPLC determination of some noble metals as their thiazolylazoresorcinol chelates

The first use of 4-(2-thiazolylazo)resorcinol (TAR) as a chelating reagent in the reversed-phase HPLC separation and determination of Os, Rh and Ru is reported. A precolumn derivatization method is used, followed by separation on an octadecyl-bonded silica stationary phase with a methanol-water mobile phase. The coloured complexes of Os, Rh, and Ru are completely separated within 8 min with a 60:40 v/v methanol-water mixture (pH 4.0, tetrabutylammonium as counter-ion). The detection limits for Rh, Ru and Os at 550 nm are 5, 6 and 17 ng/ml respectively. Recoveries of 94-102% have been obtained for these trace noble metals in analysis of anode slime.