Vacuum Ultraviolet Excited Photoluminescence Properties of Y202S:Eu3+,Bi3+ Phosphor

As an Hg-free lamp using phosphor,the Bi3+ and Eu3+ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum uitraviolet(VUV) excitation were investigated.The VUV photolumineseent intensity of Y2O2S:Eu3+ was weak,however,considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S:Eu3+,Bi3+ systems.Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S:Eu3+,Bi3+ at 147 nm is mainly because the Bi3+ acts as a medium and effectively performs the energy transfer process: Y3+-O2→Bi3+→Eu3+,while the intense emission band at 172 nm is attributed to the absorption of the characteristic 1So-1P1 transition of Bi3+ and the direct energy transfer from Bi3+ to Eu3+.The Y2O2S:Eu3+,Bi3+ shows excellent VUV optical properties compared with the commercial (Y,Gd)BO3:Eu3+.Thus,the Y2O2S:Eu3+,Bi3+ can be a potential red VUV-excited candidate applied in Hg-free lamps for backlight of liquid crystal display.     

白光LED用黄色荧光粉Ba(Y1-0.5x-yAly)2S4:xHo3+的合成和发光特性

采用高温固相法合成了Ba(Y1-0.5x-yAly)2S4:xHo3+系列荧光粉。在465 nm蓝光激发下,荧光粉的发射光谱呈多谱带发射,主峰位于492、543和661 nm处,分别对应于Ho3+的5F3→5I8,(5S2,5F4)→5I8和5F5→5I8跃迁发射。研究了Ho3+和Al3+掺杂量对BaY2S4:Ho3+发光性能的影响。结果表明,随着Ho3+掺杂量的逐渐增大,荧光粉的发光颜色由绿色逐渐向红色转变;适量Al3+取代Y3+可以提高BaY2S4:Ho3+荧光粉的发光强度。荧光粉Ba(Y0.665Al0.3)2S4:0.07Ho3+在蓝光(465 nm)激发下发射黄光,是一种潜在的白光LED用黄色荧光粉。     

稀土二膦酸配合物的合成、结构和荧光性质

合成并表征了3个同构的稀土二膦酸化合物Ln(hpyedpH₂)(hpyedpH₃)·2H₂O [Ln=Gd (1)，Eu (2)，Tb (3)；hpyedpH₄=1-hydroxy -2-(3-pyridyl)ethylidene-1，1-diphosphonic acid，C₇H₁₁NO₇P₂]，测定了化合物1的单晶结构。发现它们具有链状结构，其中Ln通过3个或4个O-P-O基团交替连接，链与链之间存在氢键和π-π堆积作用。探讨了化合物2和3的荧光性质。     

采用一阶导数光谱研究[PtCl6]2-的可控水解

通过紫外吸收光谱、导数光谱以及溶液电导率的变化研究了紫色光对[PtCl6]2-水解过程的影响规律.     

(Ca1-x-yLuy)MoO4∶xEu3+红色荧光粉的化学共沉淀合成与光致发光

使用NH4HCO3-NH3.H2O混合沉淀剂,采用化学共沉淀法合成(Ca1-x-yLuy)MoO4:xEu3+红色荧光粉,通过XRD、EDS、荧光光谱和CIE色度图研究该荧光粉的晶体结构、成分组成及发光性能。结果表明,实验按照理论化学计量比成功合成了(Ca1-x-yLuy)MoO4:xEu3+红色荧光粉,该荧光粉为CaMoO4白钨矿结构;(Ca1-x-yLuy)MoO4:xEu3+具有7F0→5L6(394 nm)和7F0→5D2(465 nm)的强电子吸收,且在613 nm处可发射高强度红光,其色坐标为(0.666 5,0.332 9),明显优于传统的Y2O2S:Eu3+红色荧光粉;此外,当Lu含量为30mol%时,荧光粉发光强度最佳。     

Preparation and photoluminescence properties of Y2SiO5:Eu3+ nanocrystals

The sol-emulsion-gel method is used for the preparation of about 5-7 nm size Eu2O3 doped and coated Y2SiO5 nanoparticles at 1300 degrees C. Here, we report the role of surface coating, dopant concentration and temperature of heating on the modification of crystal structure and the photoluminescence properties of Y2SiO5:Eu3+ nanocrystals. It is found that photoluminescence properties are sensitive to the crystal structure which is again controlled by surface coating, concentration and heating temperature. The decay times are 0.76, 1.14, 1.23 and 1.40 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals prepared at 1100 degrees C (X1-Y2SiO5). However, in X2-Y2SiO5 crystal phase (at 1300 degrees C) the average decay times are 1.05, 1.35, 1.55 and 1.60 ms for 0.25, 0.5, 1.0 and 2.5 mol% Eu2O3 doped Y2SiO5 nanocrystals, indicating the photoluminescence properties depend on both the crystal structure and the concentration of ions. The emission intensity of the peak at 612 nm (5D0-->7F2) of the Eu3+-ions is found to be sensitive to the doping and surface coating of Y2SiO5 nanocrystals. The decay times are 1.55 and 1.70 ms for 1300 degrees C heated 1.0 mol% Eu2O3 doped and coated Y2SiO5 nanocrystals, respectively. Our analysis suggests that the site symmetry of ions plays a most important role in the modification of radiative relaxation mechanisms and as a result on the overall photoluminescence properties.     

The fabrication of one-dimensional Ca4Y6(SiO4)6O: Ln3+ (Ln=Eu, Tb) phosphors by electrospinning method and their luminescence properties

One-dimensional Ca(4)Y(6)(SiO(4))(6)O: Ln(3+) (Ln=Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD) pattern and high-resolution transmission electron microscopy (HRTEM) confirmed that the fibers were composed of hexagonal Ca(4)Y(6)(SiO4)(6)O phase. Thermogravimetric and differential scanning calorimetry (TG-DSC) results showed that the Ca(4)Y(6)(SiO4)(6)O phase began to crystallize at 740°C. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) results indicated that the diameter of as-prepared microfibers ranged from 390 to 900 nm and the diameter of the microfibers annealed at 1000°C ranged from to 120 to 260 nm. Under ultraviolet and low-voltage electron beams (3-5 kV) excitation, the Ca(4)Y(6)(SiO(4))(6)O: Ln(3+) (Ln=Eu, Tb) samples showed the red and green emission, corresponding to (5)D(0)→(7)F(2) transition of Eu(3+) and (5)D(4)→(7)F(5) transition of Tb(3+), respectively.     

New SrAl2B2O7:Eu2+, Mn2+ phosphors for white light-emitting diodes

A series of Eu(2+) and Mn(2+) co-doped SrAl(2)B(2)O(7) phosphors were prepared by solid-state reaction method. X-ray powder diffraction (XRD) and photoluminescence excitation and emission were employed to characterize the phosphors. The results show that energy transfers between Eu(2+)and Mn(2+) ions. As the content of Ca(2+) ions in Ca(x)Sr(0.92-x)Al(2)B(2)O(7):Eu(2+)(0.06), Mn(2+)(0.02) phosphors increased, the CIE coordinates decreased and close to the white color standard mandated by the National Television Standard Committee (NTSC). Meanwhile, a white LED (light-emitting diode) was fabricated by combining the Ca(0.5)Sr(0.42)Al(2)B(2)O(7):Eu(2+)(0.06), Mn(2+)(0.02) phosphors with a 370 nm InGaN chip. The color coordinate of the fabricated white LED was also close to the white color standard, indicating that the Ca(0.5)Sr(0.42)Al(2)B(2)O(7):Eu(2+)(0.06), Mn(2+)(0.02) phosphor is a promising single-host phosphor that can be used in white LEDs.     

Gelification: an effective measure for achieving differently sized biocompatible Fe3O4 nanocrystals through a single preparation recipe

Biocompatible Fe(3)O(4) nanocrystals were synthesized through the pyrolysis of ferric acetylacetonate (Fe(acac)(3)) in diphenyl oxide, in the presence of α,ω-dicarboxyl-terminated polyethylene glycol (HOOC-PEG-COOH) and oleylamine. Unusual gelification phenomena were observed from the aliquots extracted at different reaction stages after they were cooled to room temperature. By reaction time, the average size of the Fe(3)O(4) nanocrystals was tuned from 5.8 to 11.7 nm with an equilibrium size around 11.3 nm. By increasing the gelification degree of the stock solution, the equilibrium size of the Fe(3)O(4) nanocrystals was further increased from 11.3 to 18.9 nm. The underlying gel formation mechanism was investigated by using ultraviolet-visible absorption spectroscopy and Fourier transform infrared spectroscopy. The results suggest that the complexation between HOOC-PEG-COOH and Fe(acac)(3), with the help of oleylamine, results in large molecular networks, which are responsible for the gelification of the stock solution, while the interaction between the fragment of the molecular network and Fe(3)O(4) nanocrystal is responsible for the second gelification process observed during the early stage of reflux. To further investigate the particle growth behavior, small molecules released during the preparation were collected and analyzed by using photoelectron spectroscopy/photoionization mass spectroscopy (PES/PIMS). It was demonstrated that the pyrolysis of the Fe precursor is strongly correlated with the particle growth process. Further numerical simulations reveal that the first gelification process induced by the complexation between HOOC-PEG-COOH and Fe(acac)(3) largely alters the pyrolysis behavior of the Fe precursor; consequently, the equilibrium size of the resultant Fe(3)O(4) nanocrystals can effectively be tuned by the gelification degree of the stock solution.     

Facile synthesis and multicolor luminescent properties of uniform Lu2O3:Ln (Ln=Eu3+, Tb3+, Yb3+/Er3+, Yb3+/Tm3+, and Yb3+/Ho3+) nanospheres

Multicolor Lu(2)O(3):Ln (Ln=Eu(3+), Tb(3+), Yb(3+)/Er(3+), Yb(3+)/Tm(3+), and Yb(3+)/Ho(3+)) nanocrystals (NCs) with uniform spherical morphology were prepared through a facile urea-assisted homogeneous precipitation method followed by a subsequent calcination process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectrum (EDS), Fourier transformed infrared (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), and photoluminescence (PL) spectra as well as kinetic decays were employed to characterize these samples. The XRD results reveal that the as-prepared nanospheres can be well indexed to cubic Lu(2)O(3) phase with high purity. The SEM images show the obtained Lu(2)O(3):Ln samples consist of regular nanospheres with the mean diameter of 95 nm. And the possible formation mechanism is also proposed. Upon ultraviolet (UV) excitation, Lu(2)O(3):Ln (Ln=Eu(3+) and Tb(3+)) NCs exhibit bright red (Eu(3+), (5)D(0)→(7)F(2)), and green (Tb(3+), (5)D(4)→(7)F(5)) down-conversion (DC) emissions. Under 980 nm NIR irradiation, Lu(2)O(3):Ln (Ln=Yb(3+)/Er(3+), Yb(3+)/Tm(3+), and Yb(3+)/Ho(3+)) NCs display the typical up-conversion (UC) emissions of green (Er(3+), (4)S(3/2),(2)H(11/2)→(4)I(15/2)), blue (Tm(3+), (1)G(4)→(3)H(6)) and yellow-green (Ho(3+), (5)F(4), (5)S(2)→(5)I(8)), respectively.     

由5-磺基水杨酸组装的镧系金属有机骨架配合物的合成及结构

在水热条件下,合成了6个新的镧系金属配位聚合物,Ln₂(SSA)₂(phen)₄(H₂O)₂(Ln=Er(Ⅲ) (1),Yb(Ⅲ) (2)),[La₂(SSA)₂(phen)₂(H₂O)₄·(phen)·(H₂O)_{1.33相似文献}   

立方Gd2O3∶Eu纳米晶及光谱性质

用透射电镜拍摄球形ＣＧｄ２Ｏ３∶Ｅｕ纳米晶,并研究了室温下它的激发和发射光谱。结果表明,９００℃制备的体材料和相应的纳米晶相比,其激发光谱存在明显差异。前者以基质激发带为主导,电荷转移带（ＣＴＢ）很弱,而后者以ＣＴＢ为主。在绝缘体稀土氧化物中,可以忽略纳米效应对Ｅｕ３＋离子的４ｆ４ｆ能级跃迁的激发和发射光谱峰位的影响     

Syntheses, structure, and luminescent properties of novel hydrated rare earth borates Ln2B6O10OH4•H2O (Ln = Pr, Nd, Sm, Eu, Gd, Dy, Ho, and Y)

Ln(2)B(6)O(10)(OH)(4)?H(2)O (Ln = Pr, Nd, Sm-Gd, Dy, Ho, and Y), a new series of hydrated rare earth borates, have been synthesized under hydrothermal conditions. A single crystal of Nd analogue was used for the structure determination by X-ray diffraction. It crystallizes in the monoclinic space group C2/c with lattice constants a = 21.756(4), b = 4.3671(9), c = 12.192(2) ?, and β = 108.29(3)°. The other compounds are isostructural to Nd(2)B(6)O(10)(OH)(4)?H(2)O. The fundamental building block (FBB) of the polyborate anion in this structure is a three-membered ring [B(3)O(6)(OH)(2)](5-). The FBBs are connected by sharing oxygen atoms forming an infinite [B(3)O(5)(OH)(2)](3-) chain, and the chains are linked by hydrogen bonds, establishing a two-dimensional (2-D) [B(6)O(10)(OH)(4)?H(2)O](6-) layer. The 2-D borate layers are thus interconnected by Ln(3+) ions to form the complex three-dimensional structure. Ln(2)B(6)O(10)(OH)(4)?H(2)O dehydrates stepwise, giving rise to two new intermediate compounds Ln(2)B(6)O(10)(OH)(4) and Ln(2)B(6)O(11)(OH)(2). The investigation on the luminescent properties of Gd(2-2x)Eu(2x)B(6)O(10)(OH)(4)?H(2)O (x = 0.01-1.00) shows a high efficiency of Eu(3+) f-f transitions and the existence of the energy transfer process from Gd(3+) to Eu(3+). Eu(2)B(6)O(10)(OH)(4)?H(2)O and its two dehydrated products, Eu(2)B(6)O(10)(OH)(4) and Eu(2)B(6)O(11)(OH)(2), present the strongest emission peak at 620 nm ((5)D(0) → (7)F(2) transition), which may be potential red phosphors.     

4,4′-双(4″,4″,4″-三氟代-1″,3″-二氧代丁基)联苯铕配合物的合成及发光性能

合成了2个新的配合物Eu2(btb)3(H2O)4(1)和Eu2(btb)3(phen)2(2)[H2btb=4,4′-双(4″,4″,4″, -三氟代 - 1″,3″-二氧代丁基)联苯, phen=1,10-邻菲罗啉]. 采用元素分析、红外光谱、紫外光谱和快原子轰击质谱表征了2个配合物的结构. 在近紫外光激发下, 配合物1和2都发射出强的铕离子特征红光. 对614 nm 红光进行监控, 其激发光谱在395 nm处具有最大的激发强度, 与InGaN芯片发射的近紫外光激发相匹配. 将配合物1和2与395 nm 发射的InGaN芯片进行组合制备了红色发光二极管. 在配合物和硅树脂的质量比为1∶25的情况下, 2个红色发光二极管的色坐标分别为x1=0.5210, y1=0.2285(配合物1); x2=0.5835和y2=0.2857(配合物 2), 位于标准的国际色坐标红色区域; 器件的发光效率分别为0.65和0.76 lm/W. 研究结果表明, 配合物1和2是制作白光二极管可供选用的红色发光材料.     

Optically active mixed (phthalocyaninato)(porphyrinato) rare earth triple-decker complexes. Synthesis, spectroscopy, and effective chiral information transfer

With the view to creating novel sandwich-type tetrapyrrole rare earth complexes toward potential applications in material science and chiral catalysis, two new optically active mixed (phthalocyaninato)(porphyrinato) rare earth triple-decker complexes with both (R)- and (S)-enantiomers [M(2)(Pc)(2)(TCBP)] {TCBP = Meso-tetrakis [3,4-(11,12:13,14-di(1',2'-naphtho)-1,4,7,10,15,18-hexaoxacycloeicosa-2,11,13-triene)-phenyl] porphyrinate; M = Eu (1), Y (2)} have been designed and prepared by treating optically active metal free porphyrin (R)-/(S)-H(2)TCBP with M(Pc)(2) in the presence of corresponding M(acac)(3)·nH(2)O (acac = acetylacetonate) in refluxing 1,2,4-trichlorobenzene (TCB). These novel mixed ring rare earth triple-decker compounds were characterized by a wide range of spectroscopic methods including MS, (1)H NMR, IR, electronic absorption, and magnetic circular-dichroism (MCD) spectroscopic measurements in addition to elemental analysis. Perfect mirror image relationship was observed in the Soret and Q absorption regions in the circular-dichroism (CD) spectra of the (R)- and (S)-enantiomers, indicating the optically active nature of these two mixed (phthalocyaninato)(porphyrinato) rare earth triple-decker complexes. This result reveals the effective chiral information transfer from the peripheral chiral binaphthyl units to the porphyrin and phthalocyanine chromophores in the triple-decker molecule because of the intense π-π interaction between porphyrin and phthalocyanine rings. In addition, their electrochemical properties have also been investigated by cyclic voltammetry (CV).     

Morphological control and luminescent properties of YVO4:Eu nanocrystals

Rodlike, olivelike, pineapplelike, and particlelike nanocrystals of theYVO4:Eu (5 at. % Eu) were synthesized by a hydrothermal reaction with different conditions, respectively. The rodlike nanocrystal has a rectangular cross-section with about 35 x 60 nm2 and a length of about 220 nm. The olivelike nanocrystal has an equatorial diameter of approximately 40 nm and a length of approximately 200 nm. The pineapplelike nanocrystal with an equatorial diameter of approximately 200 nm and a length of approximately 300 nm, is a superstructure consisting of self-organized nanorods with a diameter of approximately 20 nm and a length of approximately 50 nm. The particlelike nanocrystals show globular and polyhedral shape with a diameter of approximately 50 nm. Their UV-vis absorption peaks are at 305, 308, 285, and 280 nm, respectively, and there is such a trend that the absorption peaks shift to higher energy as the size of the particles decreases. Compared with other-shape nanocrystals, the luminescence intensity of the olivelike nanocrystals is obviously enhanced. It suggests that we could obtain the function-improved materials by tailoring the size and shape of theYVO4:Eu nanostructures.     

(2-羧基苯氧基)苯-1,2-二羧酸构筑的镧系配合物对苯甲醛和阳离子的荧光传感

采用水热法合成了5个稀土配合物[Sm₂(bdbc)₂(phen)₄](1)和[Ln(bdbc)(phen)(H₂O)][Ln=Eu(2), Gd(3), Tb(4), Dy(5), bdbc=(2-羧基苯氧基)苯-1,2-二羧酸根, phen=1,10-邻菲啰啉]. 配合物1是双核分子, 通过氢键和C—H…π作用进一步构筑成一维超分子结构; 配合物2~5是同构的一维双螺旋结构, 通过氢键和C—H…π作用进一步构筑成三维超分子结构. 配合物1, 2, 4和5呈现了Sm³⁺, Eu³⁺, Tb³⁺和Dy³⁺离子的特征发射, 分别对应于Sm³⁺离子的⁴G_5/2→⁶H_J/2(J=5, 7, 9)、 Eu³⁺离子的⁵D₀→⁷F_J(J=1—4)、 Tb³⁺离子的⁵D₄→⁷F_J(J=6, 5, 4, 3)和Dy³⁺离子的⁴F_5/2→⁶H_J/2(J=15, 13)跃迁. 对配合物4的荧光性质进行了表征, 结果表明, 配合物4可用作荧光探针以检测阳离子和苯甲醛.     

Vacuum Ultraviolet Excited Photoluminescence Properties of Y2O2S：Eu^3＋,Bi^3＋ Phosphor

As an Hg-free lamp using phosphor, the Bi3+ and Eu3+ co-doped Y2O2S phosphors were prepared and their luminescence properties under vacuum ultraviolet(VUV) excitation were investigated. The VUV photoluminescent intensity of Y2O2S:Eu3+ was weak, however, considerably stronger red emission at 626 nm with good color purity was observed in Y2O2S:Eu3+,Bi3+ systems. Investigation on the photoluminescence reveals that the strong VUV luminescence of Y2O2S:Eu3+,Bi3+ at 147 nm is mainly because the Bi3+ acts as a med...     

Electrospinning synthesis and luminescence properties of one-dimensional La(9.33)(SiO4)6O2: Ln3+ (Ln = Ce, Eu, Tb) microfibers

One-dimensional La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers were fabricated by a simple and cost-effective electrospinning method. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), photoluminescence (PL) and low voltage cathodoluminescence (CL) as well as kinetic decay were used to characterize the resulting samples. SEM and TEM results indicated that the diameter of the microfibers annealed at 1000 °C for 3 h was 200-245 nm. The microfibers were further composed of fine and closely linked nanoparticles. La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors showed the characteristic emission of Ce(3+) (5d → 4f), Eu(3+) ((5)D(0)→(7)F(J)) and Tb(3+) ((5)D(3,4)→(7)F(J)) under ultraviolet excitation and low-voltage electron beams (3-5 kV) excitation. An energy transfer from Ce(3+) to Tb(3+) was observed in the La(9.33)(SiO(4))(6)O(2): Ce(3+), Tb(3+) phosphor under ultraviolet excitation and low-voltage electron beam excitation. Luminescence mechanisms were proposed to explain the observed phenomena. Blue, red and green emission can be realized in La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) microfibers by changing the doping ions. So the La(9.33)(SiO(4))(6)O(2): Ln(3+) (Ln = Ce, Eu, Tb) phosphors have potential applications in full-color field emission displays.     

Synthesis, structure, and thermally stable luminescence of Eu(2+)-doped Ba2Ln(BO3)2Cl (Ln = Y, Gd and Lu) host compounds

A new family of chloroborate compounds, which was investigated from the viewpoint of rare earth ion activated phosphor materials, have been synthesized by a conventional high temperature solid-state reaction. The crystal structure and thermally stable luminescence of chloroborate phosphors Ba(2)Ln(BO(3))(2)Cl:Eu(2+) (Ln = Y, Gd, and Lu) have been reported in this paper. X-ray diffraction studies verify the successful isomorphic substitution for Ln(3+) sites in Ba(2)Ln(BO(3))(2)Cl by other smaller trivalent rare earth ions, such as Sm, Eu, Tb, Dy, Ho, Er, Tm, and Yb. The detailed structure information for Ba(2)Ln(BO(3))(2)Cl (Ln = Y, Gd, and Lu) by Rietveld analysis reveals that they all crystallize in a monoclinic P2(1)/m space group. These compounds display interesting and tunable photoluminescence (PL) properties after Eu(2+)-doping. Ba(2)Ln(BO(3))(2)Cl:Eu(2+) phosphors exhibit bluish-green/greenish-yellow light with peak wavelengths at 526, 548, and 511 nm under 365 UV light excitation for Ba(2)Y(BO(3))(2)Cl:Eu(2+), Ba(2)Gd(BO(3))(2)Cl:Eu(2+), and Ba(2)Lu(BO(3))(2)Cl:Eu(2+), respectively. Furthermore, they possess a high thermal quenching temperature. With the increase of temperature, the emission bands show blue shifts with broadening bandwidths and slightly decreasing emission intensities. It is expected that this series of chloroborate phosphors can be used in white-light UV-LEDs as a good wavelength-conversion phosphor.