Lamellar multilayer hexadecylaniline-modified gold nanoparticle films deposited by the Langmuir-Blodgett technique

Organization of hexadecylaniline (HDA)-modified colloidal gold particles at the air-water interface and the formation thereafter of lamellar, multilayer films of gold nanoparticles by the Langmuir-Blodgett technique is described in this paper. Formation of HDA-capped gold nanoparticles is accomplished by a simple biphasic mixture experiment wherein the molecule hexadecylaniline present in the organic phase leads to electrostatic complexation and reduction of aqueous chloroaurate ions, capping of the gold nanoparticles thus formed and phase transfer of the now hydrophobic particles into the organic phase. Organization of gold nanoparticles at the air-water interface is followed by surface pressure—area isotherm measurements while the formation of multilayer films of the nanoparticles by the Langmuir-Blodgett technique is monitored by quartz crystal microgravimetry, UV-Vis spectroscopy, Fourier transform infrared spectroscopy and transmission electron microscopy.     

Preparation and characterization of polyion-complexed Langmuir-Blodgett films containing an NLO chromophore

Polyion complexes formed by monolayers of quaternary ammonium amphiphiles containing the 4-nitro-4'-alkoxy azobenzene chromophore spread at the surface of aqueous solutions of a number of anionic polyelectrolytes were investigated. In general, pi-A isotherms were found to depend on the nature of the polyion present in the subphase, with monolayers of complexes involving polycarboxylates tending to exhibit larger limiting areas than those formed with polysulfonates or polysulfates. Monolayers of the polyion complexes can be transferred to hydrophilic solid substrates to yield Z-type LB films, although some peeling off for more than 10 layers is an impediment. X-ray reflectivity measurements indicate that relatively smooth and uniform films are obtained up to about 10 layers. Average layer thicknesses are, however, significantly smaller than extended molecular lengths, implying that the amphiphiles are strongly inclined from the surface normal. Polarized FT-IR measurements also indicate poor molecular orientation perpendicular to the surface. Preliminary SHG measurements for LB films of two systems, 12Q/CMC-Na and 12Q/PAA, confirm the presence of noncentrosymmetric out-of-plane chromophore ordering. Stable signals are observed for elevated temperatures up to 130 degrees C and for a period of 4 months at room temperature. To the best of our knowledge, this represents the first report of stable SHG in LB films of polyion complexes.     

Langmuir-Blodgett films of fluorinated glycolipids and polymerizable lipids and their phase separating behavior

This paper describes the phase separating behavior of Langmuir monolayers from mixtures of different lipids that (i) either carry already a glycopeptide recognition site or can be easily modified to carry one and (ii) polymerizable lipids. To ensure demixing during compression, we used fluorinated lipids for the biological headgroups and hydrocarbon based lipids as polymerizable lipids. As a representative for a lipid monomer, which can be polymerized in the hydrophilic headgroup, a methacrylic monomer was used. As a monomer, which can be polymerized in the hydrophobic tail, a lipid with a diacetylene unit was used (pentacosadiynoic acid, PDA). The fluorinated lipids were on the one hand a perfluorinated lipid with three chains and on the other hand a partially fluorinated lipid with a T(N)-antigen headgroup. The macroscopic phase separation was observed by Brewster angle microscopy, whereas the phase separation on the nanoscale level was observed by atomic force microscopy. It turned out that all lipid mixtures showed (at least) a partial miscibility of the hydrocarbon compounds in the fluorinated compounds. This is positive for pattern formation, as it allows the formation of small demixed 2D patterned structures during crystallization from the homogeneous phase. For miscibility especially a liquid analogue phase proved to be advantageous. As lipid 3 with three fluorinated lipid chains (very stable monolayer) is miscible with the polymerizable lipids 1 and 2, it was mostly used for further investigations. For all three lipid mixtures, a phase separation on both the micrometer and the nanometer level was observed. The size of the crystalline domains could be controlled not only by varying the surface pressure but also by varying the molar composition of the mixtures. Furthermore, we showed that the binary mixture can be stabilized via UV polymerization. After polymerization and subsequent expansion of the barriers, the locked-in polymerized structures are stable even at low surface pressures (10 mN/m), where the unpolymerized mixture did not show any segregation.     

Preparation of ordered films containing a phenylene ethynylene oligomer by the Langmuir-Blodgett technique

This paper reports the fabrication and characterization of Langmuir and Langmuir-Blodgett (LB) films incorporating an oligo(phenylene-ethynylene) (OPE) derivative, namely, 4-[4-(4-hexyloxyphenylethynyl)-phenylethynyl]-benzoic acid (HBPEB). Conditions appropriate for deposition of monolayers of HBPEB at the air-water interface have been established and the resulting Langmuir films characterized by a combination of surface pressure and surface potential versus area per molecule isotherms, Brewster angle microscopy, and ultraviolet reflection spectroscopy. The Langmuir films are readily transferred onto solid substrates, and one-layer LB films transferred at several surface pressures onto mica substrates have been analyzed by means of atomic force microscopy, from which it can be concluded that 14 mN/m is an optimum surface pressure of transference, giving well-ordered homogeneous films without three-dimensional defects and a low surface roughness. The optical and emissive properties of the LB films have been determined with significant blue-shifted absorption spectra indicating formation of two-dimensional H aggregates and a Stokes shift illustrating the effects of the solid-like environment on the molecular chromophore.     

Preparation and characterization of electrically conducting Langmuir-Blodgett films of poly(N-octadecylaniline)

A stable monolayer of N-octadecylaniline containing stearic acid at the air-water interface has been obtained. However, the Langmuir monolayer of pure poly(N-octadecylaniline) was not stable, but mixed Langmuir-Blodgett films of this polymer with stearic acid in different ratios as a spreading aid were stable. The electrical conductivity of these films increased by five orders of magnitude after doping with iodine as compared to that before iodine doping (5.8x10(-7) S cm(-1)). Temperature-dependent electrical conductivity suggested that these films were semiconducting in nature with low thermal activation energy. Impedance analyses of these films revealed that the equivalent circuit for poly(N-octadecylaniline) was (RQ) whereas that for mixed poly(N-octadecylaniline) with stearic acid was (RQ)(RQ).     

Study of nonlinear optical properties of multilayer Langmuir-Blodgett films containing bacteriorhodopsin

Multilayer oriented Langmuir-Blodgett films of bacteriorhodopsin were prepared and their nonlinear optical properties, including second harmonic generation and photoresponse at a two phase-modulated beams mixing, were investigated. The nonlinear component of refractive index of the films was measured.     

Pure and mixed films of a nitrostilbene derivative at the air-water interface, Langmuir-Blodgett multilayer fabrication, and optical characterization

This paper reports the preparation and characterization of pure Langmuir and Langmuir-Blodgett (LB) films of a stilbene derivative containing two alkyl chains, namely 4-dioctadecylamino-4'-nitrostilbene. Mixed films incorporating docosanoic acid and the stilbene derivative are also studied. Brewster angle microscopy (BAM) analysis has revealed the existence of randomly oriented three-dimensional (3D) aggregates, spontaneously formed immediately after the spreading process of the stilbene derivative onto the water surface. These 3D aggregates coexist with a Langmuir film that shows the typical gas, liquid, and solid-like phases in the surface pressure and surface potential vs area per molecule isotherms, indicative of an average preferential orientation of the stilbene compound at the air-water interface, and a gradual molecular arrangement into a defined structure upon compression. A blue shift of 55 nm of the reflection spectrum of the Langmuir film with respect to the spectrum of a chloroform solution of the nitrostilbene indicates that two-dimensional (2D) H-aggregates are formed at the air-water interface. The monolayers are transferred undisturbed onto solid substrates with atomic force microscopy (AFM) revealing that the one layer LB films are constituted by a monolayer of the stilbene derivative together with some 3D aggregates. When the nitrostilbene compound is blended with docosanoic acid, the 3D aggregation is avoided in the Langmuir and Langmuir-Blodgett films, but does not limit the formation of 2D H-aggregates, desirable for second-order nonlinear optical response in the blue domain. The AFM images of the mixed LB films show that they are formed by a docosanoic acid monolayer and, on the top of it, a bilayer of the stilbene derivative.     

X-ray investigations of Langmuir-Blodgett multilayer films of side-chain liquid crystal copolymers

X-ray reflectivity studies on Langmuir-Blodgett multilayer films of side-chain liquid crystal polymers are reported. The films have a high degree of lamellar order. The layer periodicity is independent of the type of monolayer deposition, implying a reorientation of the side group mesogens following the deposition process. X-ray reflectivity from thin films displays subsidiary maxima permitting a quantitative measure of the change in side-chain density between multilayer and monolayer. A unit cell density profile is calculated for thick films assuming a symmetric unit cell.     

两亲性芳香亚胺环钯化合物及其Langmuir-Blodgett膜的制备、表征及催化活性

合成并表征了一系列新型两亲性芳香亚胺环钯化合物.结果显示,该系列环钯催化剂可高效催化均相条件下的Heck和Suzuki偶联反应.将两亲性芳香亚胺环钯二聚体制成LB膜,其在异相条件下的催化活性是均相条件下的25倍.     

Sum frequency generation from Langmuir-Blodgett multilayer films on metal and dielectric substrates

Sum frequency generation (SFG) vibrational spectra of cadmium arachidate multilayer films adsorbed on a substrate with high nonresonant susceptibility, i.e., gold, and on a low nonresonant susceptibility substrate, i.e., fused quartz, have been investigated in the C-H stretching region in air. The films were formed by Langmuir-Blodgett (LB) deposition and their spectra recorded using SFG spectrometers employing both 532-nm nanosecond and 800-nm femtosecond lasers, with counter-propagating and co-propagating beam geometries, respectively. Both kinds of substrate were rendered hydrophobic by coating them with per-deuterated octadecanethiol (gold) or per-deuterated cadmium arachidate (fused quartz) monolayers. Single per-protonated arachidate layers in otherwise per-deuterated 10-layer films were used to show that the SFG resonances arise only from the topmost and lowermost layers in a LB film comprised of an even number of per-protonated layers, although the SFG spectra from the two hydrophobic substrates are different from each other. The differences in the spectra from the same ten-layer per-protonated films deposited on the two types of hydrophobic substrate have been explained in terms of a simple model that accounts for resonant and nonresonant contributions.     

Surface roughness in Langmuir-Blodgett multilayer films studied by AFM and X-ray diffraction

Langmuir-Blodgett multilayer films consisting of up to 100 layers of cadmium-substituted arachidic acid on silicon wafers have been studied. The samples were deposited from a water subphase containing Cd²⁺ ions by using an alternate-layer Langmuir-Blodgett (LB) trough under computer control. Long-range orientational order was observed by atomic force microscopy on the surface of films with a small number of layers. X-ray reflectivity curves showed regularly spaced Bragg peaks arising from multilayer structure. The periodicity of the LB film is in agreement with twice the estimated molecular length, which confirms that the multilayer structure has a bilayer (Y) configuration. We demonstrate that the growth process of the LB films must have been stochastic. Our results are in good agreement with the Eden model of growth.     

Ultrathin films of variable polarity and crystallinity obtained from 1,2-polybutadiene nanoparticle dispersions

Characterization of ultrathin films of different polymer nanoparticles obtained at room temperature via spin-coating of aqueous dispersions and their morphology are described. Very small nanoparticles of semicrystalline 1,2-polybutadiene (PB), noncrystalline poly(1-butene) (PH), and poly(1-butenal) (PHF) were prepared via catalytic emulsion polymerization and subsequent hydrogenation or hydroformylation. The prefabricated nanoparticles were used as building blocks. The thin films obtained are continuous and transparent (n=1.5; κ=0). The properties of these films, formed from different constituents, are analyzed. Atomic force microscopy (AFM) and transmission electron microscopy (TEM) images show that the PB-films are very smooth (rms roughness=10 nm) and polycrystalline. Recrystallization of these PB films reveals that edge-on lamellae are the constituent units. Films with very low roughness values (rms roughness <2 nm) are obtained with PH nanoparticles, due to the soft character of the nanoparticles. The AFM profile of the PHF films reveals that the surface remains structured after drying due to the high degree of the internal cross-linking that occurs in the nanoparticles. Quantification of the films' polarity (I(3)/I(1)=0.89, 1.3, and 2.1 for PHF, PB, and PH, respectively) agrees well with the previous values obtained for the polymer dispersions. Surfactant molecules are desorbed during the film formation; however, these aggregates can be removed by rinsing with water with no undesirable effects observed on the films.     

Langmuir-Blodgett films of cellulose nanocrystals: preparation and characterization

The goal of this work is the preparation of monolayers of cellulose I nanocrystals providing flat crystalline cellulose surfaces. Suspensions of cellulose nanocrystals were prepared by hydrolyzing ramie and tunicin fibers with sulfuric acid. Due to surface grafted sulfate groups, the negatively charged, rod-like cellulose nanocrystals were found to form stable layers at the air-water interface in the presence of a cationic amphiphilic molecule such as dioctadecyldimethylammonium (DODA) used in this work. These layers were formed at different cellulose-DODA weight ratios, compressed and analyzed by tensiometry, ellipsometry and Brewster angle microscopy. At low cellulose concentrations the layers are discontinuous, becoming dense and homogeneous upon reaching a critical weight ratio, which depends on the aspect ratio of the cellulose nanocrystals. After transfer onto silicon wafers, the surface composition and morphology as well as the thickness of the films were examined by X-ray photoelectron spectroscopy, ellipsometry and atomic force microscopy. The results indicate that they are monolayer films, well structured, relatively smooth and pure. These films offer a crystalline and easily reproducible model cellulose surface.     

Syndiotactic 1,2-polybutadiene with Co-CS2 catalyst system. I. Preparation,properties, and application of highly crystalline syndiotactic 1,2-polybutadiene

Highly crystalline syndiotactic 1,2-polybutadiene (s-PB) having melting point (mp) up to 216°C was obtained by using a Co(acac)₃-AIEt₃-CS₂ catalyst. The polymer with mp 208°C was found to have 99.7% 1,2 content and 99.6% syndiotacticity by ¹H and ¹³C-NMR measurements. The s-PB can be molded by addition of a stabilizer such as 2,6-di-t-butyl-4-hydroxymethylphenol into fiber, film, and various shaped articles. The physical properties presented in the present article include stress-strain and dynamic mechanical behavior. The highly crystalline syndiotactic 1,2-polybutadiene was applied to a carbon fiber and UBEPOL VCR (cis-1,4-polybutadiene reinforced by fibrous syndiotactic 1,2-polybutadiene).     

NO2 gas detection by Langmuir-Blodgett films of copper phthalocyanine multilayer structures

Copper (II) phthalocyanine derivatives with four alkyl chains were synthesized. Langmuir-Blodgett (LB) films of the following two compounds were deposited: Cu(II)[tetrakis(3,3-dimethyl-butoxycarbonyl)] phthalocyanine and Cu(II)[tetrakis(n-butoxycarbonyl)] phthalocyanine. Moreover, LB films from a 1:1 mixture of the two compounds were prepared. All isotherms and optical data were consistent with the molecules being stacked nearly edge-on to the substrate, with the molecular faces having a preferred orientation perpendicular to the dipping direction. The dynamic response characteristics of the electrical conductance of the LB films to different NO₂ concentrations in dry air are described. A relationship has been observed between the anisotropic molecular orientation and the electrical conductivity parallel to the substrate.     

Synthesis and characterization of amphiphilic fullerenes and their Langmuir-Blodgett films

We report here the synthesis and characterization of three amphiphilic fullerene derivatives and their Langmuir-Blodgett thin films. Two of the C(60) amphiphiles are mono-derivatives with a long alkyl chain terminated with either -COOH (2) or NH(2) (3) as the hydrophilic headgroup, and the third one (5) is designed to bear the same NH(2) group as 3 but with 10 additional hydrophobic alkyl chains grafted on the C(60) sphere (Scheme 1). These amphiphiles form stable, ordered monolayers at the air-water interface. The molecular packing at the air-water interface and the mean area per molecule are determined by pressure isotherms at room temperature. Hysteresis of pressure isotherms of side chain C(60) (5) shows complete reversibility upon compression and decompression, which suggests that side chains on the C(60) sphere inhibit formation of aggregates at the air-water interface. Comparative studies of all three amphiphiles allow us to better determine the interaction between C(60)'s and their self-assembly kinetics at the air-water interface. Monolayers of monoderivatized amphiphiles (2 and 3) were transferred successfully onto quartz substrates as Z-type multilayered Langmuir-Blodgett films, and monolayers of 5 were transferred as Y-type films. Detailed characterization of the multilayer films (Z-type deposition) prepared from amine-terminated C(60) (3) using X-ray and neutron reflectometry reveals staggering of C(60) spheres and a head-to-head (Y-type) structure presumably due to flipping and reattaching of C(60) amphiphiles to the previous underlying C(60) layer.     

J-aggregation and its characterization in Langmuir-Blodgett films of merocyanine dyes

Langmuir-Blodgett (LB) films are constructed by successively transferring monomolecular layers formed at the air-water interface onto solid substrates. One of the advantages of the LB technique in fabricating molecular aggregates lies in the fact that it can employ various kinds of molecules by mixing them at the air-water interface. The mixed system may exhibit new properties that are not observed for individual components. This method would be useful, for example, in the studies of the formation and control of the J-aggregates of functional dyes that attract attention both in science and technology. In this paper, I review this subject mainly based on our recent results in merocyanines. LB films of merocyanine dyes, mixed with arachidic acid (C(20)), exhibit J-aggregate formation and have been serving as typical systems in revealing the physical and structural aspects of nanosized molecular aggregates constructed as monolayers. In the case of LB films of a merocyanine dye having benzothiazole as donor nucleus (abbreviated as DS), electron spin resonance (ESR) spectroscopy has been successful in determining the characteristic in-plane orientation of dye molecules with respect to the dipping direction, which led to the discovery of the flow orientation effect during the dipping process of LB films as the origin of optical dichroism often observed in LB films. In this article, after an introduction of ESR spectroscopy, three major topics on the merocyanine J-aggregation and its characterization in mixed films are discussed. The first topic is the observation and control of the size of J-aggregates in the dilution limit of dyes in arachidic acid matrix for a methyl-substituted DS (6-Me-DS). Dependence of atomic force microscopy (AFM) patterns on the molar ratio allows the identification of dye domains. J-band optical peak analysis based on the Kuhn's extended dipole model, supplemented by a novel application of femtosecond pump-probe optical spectroscopy, yields the size of the J-aggregates of 10(3). The second topic is the control of the J-band peak wavelengths by mixing two different kinds of dye molecules. The first case is the mixture of a J-forming 6-Me-DS and non-J-forming merocyanine analog, DO with benzo-oxazole instead of benzothiazole of DS. The second case is the mixture of both J-forming dyes but with different J-band peak positions, 6-Me-DS and another analog of 5-Cl-DS. The optical peak shifts depending on the molar mixing ratio will be presented. The last topic is related to the elucidation of electronic states of dye molecules in the J-aggregates. Light-induced ESR (LESR) of DS films with stable isotope ((15)N or (13)C)-substituted dyes provide clear evidence for the photoinduced charge transfer by the detection of hyperfine structures. Moreover, infrared (IR) spectroscopy of (13)C-enriched dye identifies the IR absorption peak of the relevant carbon in the chromophore. The results give evidence for the enhanced intramolecular charge transfer of dyes in the J-aggregates compared with an isolated merocyanine composed of donor and acceptor moiety. Lastly, the Cl attachment in 5-Cl-DS leads to a significant enhancement of the nitrogen hyperfine coupling in the LESR spectra. These examples and others demonstrate the potential of LB films of merocyanines in the studies of the nanosized molecular aggregates in monolayer assemblies.     

Spectroscopic characterization and Langmuir-Blodgett films of a novel azopolymer material

Spectroscopic characterization and fabrication of Langmuir and Langmuir-Blodgett (LB) films of an azopolymer-pyridine (PAzPy) are reported. UV-visible absorption and fluorescence spectra, Fourier transform infrared (FTIR) spectra, and Raman spectra were recorded. The vibrational assignment of the observed spectra is supported by a complete geometry optimization, followed by vibrational frequency and intensity computations of both the trans and cis forms of the monomer (AzPy) using density functional theory at the B3LYP 6-31G(d,p) level of theory. Langmuir monolayers of the polymer (PAzPy) were formed at the water-air interface, and LB films of high quality were formed onto solid substrates. The polymer LB films were investigated by surface-enhanced Raman scattering.     

Electron transfer through clay monolayer films fabricated by the Langmuir-Blodgett technique

Hybrid films composed of amphiphilic molecules and clay particles were constructed by the modified Langmuir-Blodgett (LB) method. Clays used were sodium montmorillonite (denoted as mont) and synthetic smectite containing Co(II) ions in the octahedral sites (denoted as Co). Two kinds of amphiphilic molecules were used-[Ru(dC(18)bpy)(phen)2](ClO4)2 (dC(18)bpy = 4,4'-dioctadecyl-2,2'-bipyridyl and phen = 1,10-phenanthroline) (denoted as Ru) and octadecylammonium choloride (ODAH+Cl- or denoted as ODAH). Three kinds of hybrid films (denoted as Ru-mont, Ru-Co, and ODAH-Co films) were prepared by spreading an amphiphilic molecule onto an aqueous suspension of a clay. Atomic force microscopy (AFM) analyses of the films deposited on silicon wafers indicated that closely packed films were obtained at 20 ppm for all the above three cases. Cyclic voltammetry (CV) was measured on an ITO electrode modified with a hybrid film or a monolayer film of pure Ru(II) complex salt (denoted as Ru film). The Ru(II) complexes incorporated in the Ru-mont film lost their redox activity, indicating that montmorillonite layers acted as a barrier against electron transfer. In contrast, the same complexes in the Ru-Co film were electrochemically active with the simultaneous appearance of the redox peaks due to the Co(II)/Co(III) (or Co(II)/Co(IV)) couple. The results implied that electron transfer through cobalt clay layers was possible via mediation by Co(II) ions in a clay sheet. For an aqueous solution containing nitrite ions (NO2-) at pH 3.0, a large catalytic oxidation current was observed for both the electrodes modified with the Ru-mont and Ru-Co films. The results were interpreted in terms of the mechanisms that the charge separation of an incorporated Ru(II) complex took place to produce a pair of a Ru(III) complex and an electron and that the generated Ru(III) complex was reduced by a nitrite ion before it recombined with the electron.