Chemisorption of Au on Si（001） surface

The chemisorption of one monolayer of Au atoms on an ideal Si(001) surface is studied by using the self-consistent tight binding linear muffin-tin orbital method. Energies of the adsorption system of a Au atom on different sites are calculated. It is found that the most stable position is A site (top site) for the adsorbed Au atoms above the Si(001) surface. It is possible for the adsorbed Au atoms to sit below the Si(001) surface at the B_1 site(bridge site), resulting in a Au－Si mixed layer. This is in agreement with the experiment results. The layer projected density of states is calculated and compared with that of the clean surface. The charge transfer is also investigated.     

Electronic Structure of Si1-xⅣx/Si Superlattices on Si （001）

We have preformed systematical ab initio studies of the structural and electronic properties of short-period Si1-xⅣx/Si （x = 0.125, 0.25, 0.5, Ⅳ=Ge, Sn） superlattices （SLs） grown along the [001] direction on bulk Si. The present calculations reveal that the Si0.875Ge0.125/Si, Si0.75Ge0.25/Si and Si0.875Sn0.125/Si are the F-point direct bandgap semiconductors. The technological importance lies in the expectation that the direct gap Si1-xⅣx/Si SLs may be used as components in integrated optoelectronic devices, in conjunction with the already well-established and highly advanced silicon technology.     

Initial Processes of Hydrogen Adsorption on Si（100） Surface

The adsorption of one monolayer H atoms on an ideal Si(100) surface is studied by using the self-consistent tight binding linear muffin-tin orbital method. Energies of adsorption systems of H atoms on different sites are calculated.It is found that the adsorbed H atoms are more favorable on B1 site (bridge site) with a distance 0.056 nm above the Si surface. There does not exist reaction barrier at the Si surface. The layer projected density states are calculated and compared with those of the clean surface. The charge transfers are also investigated.     

Initial Processes of Sulfur Adsorption on Si（100） Surface

The adsorption of one monolayer S atoms on ideal Si（100） surface is studied by using the self-consistent tight binding linear muffon-tin orbital method. Energies of adsorption systems ors atoms on different sites are calculated. It is found that the adsorbed S atoms are more favorable on B1 site （bridge site） with a distance 0.131 nm above the Si surface. The .S, Si mixed layer might exist at S/Si（100） interface. The layer projected density of states are calculated and compared with that of the clean surface. The charge transfers are also investigated.     

Adsorption and diffusion of Si adatom near single-layer steps on Si surface

By use of the empirical tight-binding （ETB） method, the adsorption and diffusion behaviours ot single sllmon adatom on the reconstructed Si（100） surface with single-layer steps are simulated. The adsorption energies around the SA step, nonrebonded SB step, rebonded SB step, and rough SB step with a kink structure are specially mapped out in this paper, from which the favourable binding sites and several possible diffusion paths are achieved. Because of the rebonded and kink structures, the SB step is more ~uitable for the attachment of Si adatom than the SA step or defective surface.     

Formation of rippled surface morphology during Si/Si （100） epitaxy by ultrahigh vacuum chemical vapour deposition

The Si epitaxial films are grown on Si (100) substrates using pure Si2H6 as a gas source using ultrahigh vacuum chemical vapour deposition technology. The values of growth temperature T_g are 650 ℃, 700 ℃, 730 ℃, 750 ℃, and 800 ℃. Growth mode changes from island mode to step-flow mode with T_g increasing from 650 ℃ to 700 ℃. Rippled surface morphologies are observed at T_g = 700 ℃, 730 ℃, and 800 ℃, but disappear when T_g = 750 ℃. A model is presented to explain the formation and the disappearance of the ripples by considering the stability of the step-flow growth.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

STM study of In nanostructures formation on Ge（001） surface at different coverages and temperatures

Different In/Ge（001） nanostructures have been obtained by annealing the samples at 320℃ with different coverages of In. Annealing a sample with a critical coverage of 2.1 monolayer of In, different In/Ge（001） nanostructures can be obtained at different temperatures. It is found that thermal annealing treatments first make In atoms form elongated Ge{103}-faceted In-clusters, which will grow wider and longer with increasing temperature, and finally cover the surface completely.     

Adsorption of Fe on GaAs(100) Surface

The adsorption of one monolayer Fe atoms on an ideal GaAs (100) surface is studied by using the self-consistent tight-binding linear muffin-tin orbital method. The Fe adatom chemisorption on Ga- and As-terminatedsurface are considered separately. A monolayer of S atoms is used to saturate the dangling bonds on one of the supercellsurfaces. Energies of adsorption systems of an Fe atom on different sites are calculated, and the charge transfers areinvestigated. It is found that Fe-As interaction is stronger than Fe-Ga interaction and Fe atoms prefer to be adsorbed onthe As-terminated surface. It is possible for the adsorbed Fe atoms to sit below the As-terminated surface resulting inan Fe-Ga-As mixed layer. The layer projected density states are calculated and compared with that of the clean surface.     

Au钝化Si(100)表面的电子特性

用TB-LMTO方法研究单层的Au原子在理想的Si(100)表面的化学吸附.计算了Au原子在不同位置的吸附能,吸附体系与清洁Si(100)表面的层投影态密度, 以及电子转移情况.结果表明, Au原子在吸附面上方的A位(顶位)吸附最稳定, Au钝化Si(100)表面可以取得明显的钝化效果, 这一结论与实验事实相符合.     

Surface electromigration of metals on Si(001): In/Si(001)

The possibility of surface electromigration (SE) of metals of In, Ga, Sb and Ag on a very flat Si(001)2×1 substrate (single domain 2×1) was examined by SEM, μ-RHEED and μ-AES under UHV conditions. It was found that Ga, Sb and Ag show no SE on Si(001) surface even at DC annealing temperatures for the desorption of these metals. For In on Si(001), a very fast SE (8000 μm/min) towards the cathode side was found that suddenly sets in at 450°C DC annealing, which was related to a surface phase transition. μ-RHEED and μ-AES observation showed that the SE is related to an ordered 4×3-In phase together with two-dimensional In gas phase over the 4×3-In phase and an In-disordered phase at the front end of SE. Single domain 4×3-In phases were found to occur under sequences of In deposition and DC annealing which involve the In SE on Si(001).     

Chemisorption of isolated Br atoms on Si(100)-(2 × 1) studied by PAC

Chemisorption and desorption of isolated bromine adatoms on the Si(100)-(2 × 1) surface were investigated with nuclear methods. Br adsorption sites at low coverages of 10⁻³ monolayers (ML) were characterised by measuring the nuclear quadrupole interaction with perturbed γγ-angular correlation (PAC) of ⁷⁷Br→⁷⁷Se probe atoms. Below room temperature, two distinct adsorption sites for Br are revealed by PAC. One of them disappears after isochronal annealing above 300 K. The more stable probe-atom state is associated with single Br atoms saturating a dangling bond of the surface, while the less stable state is attributed to adsorption of Br at a bridge site. The potential barrier between the two adsorption sites is estimated to be 0.9(1) eV. At temperatures above 550 K, the fraction of atoms on distinct sites decreases, presumably due to surface diffusion. By measuring the γ-activity of the sample, complete desorption of the ⁷⁷Br atoms was observed above 620 K.     

Si(001)表面稀土金属硅化物纳米结构

稀土金属元素的硅化物在n型硅衬底上具有高电导率和低肖特基势垒的特点,在大规模集成的微电子器件领域具有很好的应用价值.文章系统介绍了在Si(001)表面自组装生长的稀土金属硅化物纳米结构的研究进展,较全面地讨论了退火温度、退火时间以及稀土金属表面覆盖度等生长条件对纳米结构生长的影响作用,并在此基础上分析了纳米线、纳米岛的晶化结构,衬底对纳米结构生长的影响,以及纳米结构的演化过程.搞清楚这些内在的生长机理,有助于人们今后实现可严格控制稀土金属硅化物纳米结构的形貌尺寸和分布的自组装生长.此外,文章还介绍了目前人们对稀土金属硅化物纳米线电学性质的研究进展.     

Surface resonance on the NiFe(001) alloy surface

First principles calculations based on density-functional theory are used to investigate the geometrical and electronic structure of a NiFe(001) invar surface. We use different ordered as well as alloy fcc-like structures to simulate the system. Ab initio atomic force minimizations show that the (001) invar surface is rumpled; Fe atoms are shifted outwards, Ni atoms inwards. A surface resonance is observed at (0.1–1.0) eV below the Fermi level, depending on the chemical ordering at and below the surface. Our calculations show that this resonance is pronounced in iron-rich surface regions. Presented at the X-th Symposium on Suface Physics, Prague, Czech Republic, July 11–15, 2005.     

Order-disorder transition on Si(001)

A phase transition between c(4x2) and 2x1 structures on the Si(001) surface has been observed at 200 K by low-energy electron diffraction. This transition is a second order order-disorder transition of the asymmetric dimer configuration. The streak pattern remains up to well above the transition temperature. The temperature dependence of the width and the length of the streak can be described in terms of the effects of a strong anisotropic coupling between adjacent asymmetric dimers.     

Phosphine dissociation on the Si(001) surface

Density functional calculations are performed to identify features observed in STM experiments after phosphine (PH3) dosing of the Si(001) surface. On the basis of a comprehensive survey of possible structures, energetics, and simulated STM images, three prominent STM features are assigned to structures containing surface bound PH2, PH, and P, respectively. Collectively, the assigned features outline for the first time a detailed mechanism of PH3 dissociation and P incorporation on Si(001).     

单畴的单原子In纳米线阵列的制备与研究

利用Si（001）向［110］方向偏4°角的斜切表面作为衬底，成功地制备了分布均匀的单畴的单原子In链阵列.扫描隧道显微镜分析表明，沉积的In原子优先吸附在台面上沿着台阶内边缘的位置，并在两个Si的二聚体链之间形成稳定的In二聚体.In二聚体组成直的单原子链，其生长机理与Car提出的“表面聚合反应”相一致.另外，衬底具有非常窄的台面和双原子层台阶边的特殊结构是形成单畴的单原子链的关键. 关键词： 铟单原子链 硅邻近面 扫描隧道显微镜