Molecular dynamics and phase behavior of polystyrene/poly(vinyl methyl ether) blend in the presence of nanosilica

The variation of phase morphology, critical temperature of demixing, and molecular dynamics for polystyrene/poly(vinyl methyl ether)(PS/PVME) blends induced by hydrophilic nanosilica(A200) or hydrophobic nanosilica(R974) was investigated. With the phase separation of blend matrix, A200 migrated into PVME-rich phase due to strong interaction between A200 and PVME, while R974 moved into PS-rich phase. The thermodynamic miscibility and concentration fluctuation during phase separation of blend matrix were remarkably retarded by A200 nanoparticles due to the surface adsorption of PVME on A200, verified by the correlation length ξ near the critical region from rheological measurement and the weakened increment of reversing heat capacity(ΔC_p) during glass transition via modulated differential scanning calorimetry(MDSC). The restricted chain diffusion induced by nanosilica still occurred despite no influence of A200 and R974 on the segmental dynamics of homogenous blend matrix. The interactions between nanosilica and polymer components could restrict the terminal relaxation of blend matrix and further manipulate their phase behavior.     

Synthesis and Characterization of Sulfonated Polyphosphazene-graft-Polystyrene Copolymersfor Proton Exchange Membranes简

A novel series of polyphosphazene-grafl-polystyrene （PP-g-PS） copolymers were successfully prepared by atom transfer radical polymerization （ATRP） of styrene monomers and brominated poly（bis（4-methylphenoxy）phosphazene） macroinitiator. The graft density and the graft length could be regulated by changing the bromination degree of the macroinitiator and the ATRP reaction time, respectively. The PP-g-PS copolymers readily underwent a regioselective sulfonation reaction, which occurred preferentially at the polystyrene sites, producing the sulfonated PP-g-PS copolymers with a range of ion exchange capacities. The resulting sulfonated PP-g-PS membranes prepared by solution casting showed high water uptake, low water swelling and considerable proton conductivity. They also exhibited good oxidative stability and high resistance to methanol crossover. Morphological studies of the membranes by transmission electron microscopy showed clear nanophase-separated structures resulted from hydrophobic polyphosphazene backbone and hydrophilic polystyrene sulfonic acid segments, indicating the formation of proton transferring tunnels. Therefore, these sulfonated copolymers may be candidate materials for proton exchange membranes in direct methanol fuel cell （DMFC） applications.     

Synthesis and Characterization of Polyaniline/Partially Phosphorylated Poly（vinyl alcohol） Nanoparticles

The polyaniline/partially phosphorylated poly（vinyl alcohol）（PANI/P-PVA） nanoparticles were prepared by the chemical oxidative dispersion polymerization of aniline monomer in 0.5 mol/L HC1 aqueous media with the partially phosphorylated poly（vinyl alcohol） （P-PVA） as the stabilizer and co-dopant. The PANI/P-PVA nanoparticles were characterized by transmission electron microscopy （TEM）, Fourier transform infrared spectroscopy （FTIR）, thermal gravimetric analysis （TGA）, X-ray diffraction （XRD）, electrical conductivity measurements and re-dispersion stability testing. All the results were compared with the properties of the conventional polyaniline in the emeraldine salt form （PANI ES）. It was found that the feeding ratio of P-PVA obviously affected the morphology, re-dispersion stability and electrical conductivity of the PANI/P-PVA nanoparticles. When the feeding ratio of P-PVA ranged from 40 wt% to 50 wt%, the PANI/P-PVA nanoparticles showed spherical shape with good uniformity, significant re-dispersion stability in aqueous media and good electrical conductivity.     

Determination of selectivity of HPLC systems by correspondence factor analysis

Correspondence factor analysis （CFA） was employed to study the selectivity of 14 HPLC systems. The tested LC systems were classified as reversed-phase （RP）, ion-exchange （IE） and hydrophilic interaction chromatography （HILIC） modes. It was found that the retentions of the hydrophilic solutes on HILIC column were significantly influenced by the second-order effects besides their hydrophilic properties. Organic modifiers and residue silanol groups on silica surface both participated in retention. HypersilTM amino column performed separation in the HILIC mode at appropriate conditions, and its retention mechanism was more similar to that of HILIC silica column than that of HILIC column coating poly（aspartamide） groups.     

Electrospun nanofibers of poly（vinyl pyrrolidone）/Eu^3＋ and its photoluminescence properties

Nanofibers of poly（vinyl pyrrolidone） （PVP）/Eu^3＋ with diameters of 300-900 nm were prepared by using sol-gel processing and electrospinning technique. The products were characterized by scanning electron microscope （SEM）, Fourier transform infrared spectroscopy （FT-IR）, and photoluminescence （PL）. The results indicated that, Eu^3＋ was successfully embedded in the onedimensional hybrid nanofibers, and the PVP/Eu^3＋ hybrid nanofibers had favorable photoluminescence properties.     

Synthesis and Characterization of Amphiphific Block Copolymer Containing PVP and Poly（5-benzyloxytrimethylene carbonate）

Amphiphilic copolymer of 5-benzyloxytrimethylene carbonate （BTMC） with poly （vinyl pyrrolidone） （PVP） was successfully synthesized using immobilized porcine pancreas lipase （IPPL） or SnOct2 as catalyst. Hydroxyl terminated PVP, synthesized with 2-mercaptoethanol as a chain transfer reagent, was employed as a rnacroinitiator. The resulting copolymers were characterized by GPC, ^1H NMR and IR. Increasing the BTMC/PVP-OH feed ratio （[B]/[P]） resulted in the increase of Mn of corresponding copolymers and the decrease of Mw/Mn. Immobilized enzyme has comparable catalytic activity to SnOct2 for the copolymerization.     

Formation of polymer vesicles by amphiphilic fluorosiloxane graft copolymers in solution

Amphiphilic fluorosiloxane graft copolymers with a poly(dimethylsiloxane)(PDMS) backbone,a hydrophobic fluorosiloxane side-chain and three hydrophilic poiyether side-chains were synthesized by hydrosilation reaction in this work.The micellization of amphiphilic graft copolymers in the water/ethanol solvent system was investigated,and vesicles with different size were formed after the self-assembly system was aged for different time.     

Application of multifunctional initiation system in block copolymerization of ethylene oxide and methyl methacrylate

A block copolymer composed of hydrophilic and crystallinic polyethylene oxide and hydrophobic and non-crystallinic polymethyl methacrylate (PMMA) was prepared by sequential initiation of alkoxy-anion and charge transfer complex using p-aminophenol as parent compound. The structure of copolymer was characterized by GPC, IR, 1H NMR and DSC in detail. The propagation of PMMA chain is dependent on the molecular weight and concentration of the first block PEO and also the polarity of solvents. The reasons are discussed.     

Preparation of Medium Cation Exchange Stationary Phase of Polymeric Matrix and Their Chromatographic Properties

Based on the monodisperse poly（glycidyl methacrylate-co-ethylenedimethacrylate） beads （PGMA/EDMA） with macropore as a medium, a new hydrophilic medium cation exchange （MCX） stationary phase for HPLC was synthesized by a new chemically modified method. The stationary phase was evaluated with the property of ion exchange, separability, reproducibility, hydrophilicity, effect of salt concentration, salt types, column loading and pH on the separation and retention of proteins in detail. It was found that it follows ion exchange chromatographic （IEC） retention mechanism. The measured bioactivity recovery for lysozyme was （96 ± 5）%. The dynamic protein loading capacity of the synthesized MCX packings was 21.8 mg/g. Five proteins were almost completely separated within 6.0 min at a flow rate of 4 mL/min using the synthesized MCX resin. The MCX resin was also used for the rapid separation and purification of lysozyme from egg white with only one step. The purity and specific bioactivity of the purified lysozyme was found more than 95% and 70345 U/mg, respectively.     

NOVEL AMPHIPHILIC FLUORESCENT GRAFT COPOLYMER： SYNTHESIS, CHARACTERIZATION AND ENCAPSULATION OF A HYDROPHOBIC AGENT

Novel amphiphilic fluorescent graft copolymer （PVP-PyAHy） was successfully synthesized by the free radical copolymerization of hydrophobic monomer N-（1-pyrenebutyryl）-N＇-acryloyl hydrazide （PyAHy） with hydrophilic precursor polymers of vinyl-functionalized poly（N-vinylpyrrolidone） （PVP） in DMF. The copolymer is amphiphilic and has intrinsic fluorescence. FT-IR, ^1H-NMR, TEM, gel permeation chromatography-multi-angle laser light scattering, UV-Vis spectroscopy and fluorescence spectroscopy were used to characterize this copolymer. The TEM observation shows that the copolymer PVP-PyAHy forms micelles in aqueous solution. Results of fluorometric measurements illustrate that the critical micelle concentration （CMC） value of PVP-PyAHy in aqueous solution is about 0.90 mg/mL. To examine the encapsulation ability of the copolymer in aqueous media, methyl yellow was employed as a model hydrophobic agent. The loading level of the polymer to methyl yellow is 8.8 mg/g. The cytotoxicity assays for Madin Darby Canine Kidney （MDCK） cells shows good biocompatibility of PVP-PyAHy in vitro. These results suggest the potential of this copolymer PVP-PyAHy as drugs delivery carrier and fluorescent tracer.     

Room temperature synthesis and mechanical properties of two kinds of elastomeric interpenetrating polymer networks based on castor oil

Two kinds of interpenetrating polymer networks (IPNs) composed of two-component polyurethane (PU) and vinyl or methacrylic polymer (PV), namely, (polyether-castor oil)PU/PV IPN(I) and (polybutadiene-castor oil)PU/PV IPN(II), were synthesized at room temperature using benzoyl peroxide and N,N-dimethylaniline as redox initiator and dibutyltin dilaurate as catalyst. The former IPN was prepared by polymerization of castor oil, NCO-terminated polyether and vinyl or methacrylic monomer together and the latter IPN was obtained by polymerization of castor oil, NCO-terminated polybutadiene, NCO-terminated castor oil and vinyl or methacrylic monomer together. Various synthesis conditions affecting mechanical properties of the two kinds of IPNs were studied. Acrylonitrile (AN) is a good monomer for synthesizing IPN(I), but is a poor monomer for preparing IPN(II). At optimum conditions for the synthesis, both the (polyether-castor oil)PU/PAN IPNs and the (polybutadiene-castor oil)PU/polystyrene (PSt) IPNs possess permanent set about 10%, tensile strength over 13 and 11 MPa and ultimate elongation over 240% and 270%, respectively, thus behaving as elastomers. TEM micrograph of a (polybutadiene-castor oil)PU/PSt IPN showed a microphase separation in the IPN.     

Synthesis of poly(vinyl acetate)‐b‐polystyrene and poly(vinyl alcohol)‐b‐polystyrene copolymers by cobalt‐mediated radical polymerization

Well‐defined poly(vinyl acetate) macroinitiators, with the chains thus end‐capped by a cobalt complex, were synthesized by cobalt‐mediated radical polymerization and used to initiate styrene polymerization at 30 °C. Although the polymerization of the second block was not controlled, poly(vinyl acetate)‐b‐polystyrene copolymers were successfully prepared and converted into amphiphilic poly(vinyl alcohol)‐b‐polystyrene copolymers by the methanolysis of the ester functions of the poly(vinyl acetate) block. These poly(vinyl alcohol)‐b‐polystyrene copolymers self‐associated in water with the formation of nanocups, at least when the poly(vinyl alcohol) content was low enough. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 81–89, 2007     

Fabrication and characterization of microstructured and pH sensitive interpenetrating networks hydrogel films and application in drug delivery field

Novel microstructured and pH sensitive poly(acryliac acid-co-2-hydroxyethyl methacrylate)/poly(vinyl alcohol) (P(AA-co-HEMA)/PVA) interpenetrating network (IPN) hydrogel films were prepared by radical precipitation copolymerization and sequential IPN technology. The first P(AA-co-HEMA) network was synthesized in the present of PVA aqueous solution by radical initiating, then followed by condensation reaction (Glutaraldehyde as crosslinking agent) within the resultant latex, it formed multiple IPN microstructured hydrogel film. The film samples were characterized by IR, SEM and DSC. Swelling and deswelling behaviors and mechanical property showed the novel multiple IPN nanostuctured film had rapid response and good mechanical property. The IPN films were studied as controlled drug delivery material in different pH buffer solution using cationic compound, crystal violet as a model drug. The drug release followed different release mechanism at pH 4.0 and pH 7.4, respectively.     

Design of new polymer architectures by combination of anionic and cationic living polymerization techniques

The grafting of polystyryl lithium onto poly(chloroethyl vinyl ether) chains has been investigated. The reaction proceeds cleanly and quantitatively thus allowing the synthesis of comblike polymers. Since the dimensions of the polystyrene branches and of the poly(chloroethyl vinyl ether) backbone can be controlled by living polymerizations, both the length and the number of branches of the graft copolymers can be tuned. The latter behave as star polymers. The possibility to initiate a new cationic polymerization of chloroethyl vinyl ether from polystyrene branches bearing acetal termini in order to prepare the corresponding stars with poly(chloroethyl vinyl ether-b- styrene) branches is also examined. Finally access to hyperbranched polymers of controlled architecture and dimensions by deactivation of a second amount of polystyryl lithium onto the last blocks of poly(chloroethyl vinyl ether) is also reported.     

Novel semi‐IPN through vinyl silane polymerization and crosslinking within PVC films

Novel semi‐IPN (interpenetrating polymer networks) were synthesized through vinyl silane modification of unplasticized poly(vinyl chloride) (PVC) films using relatively low temperatures, relatively high vinyl silane contents, and several different processing routes. A free‐radical initiator was used to promote reaction of the vinyl groups, and an aqueous acetic acid solution was used to promote the methoxysilane hydrolysis and condensation (HC) reactions for siloxane crosslink formation. A gel consisting of silane alone was formed prior to the HC process, indicating the formation of a semi‐IPN. The gel content following the HC process far exceeded the silane content, indicating a significant amount of PVC was entrapped by the silane network. This conclusion is supported by the homogeneous molecular structure and morphology of the films. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 8–22, 2001     

Swelling Kinetics of Interpenetrating Polymer Hydrogels Composed of Poly(Vinyl Alcohol)/Chitosan

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol)/chitosan were prepared by UV irradiation. The swelling behavior of the IPN hydrogels was studied by immersion of the films in deionized water at various temperatures and in buffer solutions at various pHs. IPN3 exhibited a relatively high swelling ratio. The swelling ratio increased with an increase in the content of chitosan and were higher in acidic rather than in alkaline pHs. The overall swelling process was anomalous diffusion due to polymer relaxation. The diffusion coefficient values increased with an increase in temperature and the content of chitosan.     

New silicone hydrogels based on interpenetrating polymer networks comprising polysiloxane and poly(vinyl alcohol) networks

A method for the synthesis of a new silicone hydrogel as a biphase material for soft contact lenses is considered. The method is based on the synthesis of sequential interpenetrating polymer networks (IPN) and includes the following stages: (1) cross‐linked silicone synthesis by the reaction of vinyl‐ and hydride‐containing oligosiloxanes; (2) silicone network saturation with vinyl acetate and cross‐linking monomer followed by UV‐initiated polymerization to form an IPN comprising the silicone and cross‐linked poly(vinyl acetate) (PVAc) network; (3) PVAc network alcoholysis with methanol to obtain silicone hydrogels comprising the silicone and cross‐linked poly(vinyl alcohol) (PVAl). A study of hydrophilic, optical, mechanical, and structural features of the silicone hydrogels showed that optical transparency is achieved for materials with the highest density of silicone network cross‐linking where the size of IPN structural units does not exceed 100 nm. The water content in hydrophilic networks of silicone hydrogel is found to be below the values typical of cross‐linked PVAl, leading to non‐additivity of IPN mechanical properties. Indeed, the elasticity moduli (E) of the hydrophilic and silicone networks are 0.4–0.7 and 0.7–1.8 MPa, respectively, whereas for some IPN this value reaches 3.0 MPa. The optimal parameters of synthesis providing the reduction of E to 0.8–1.6 MPa without deterioration of the required performance characteristics (optical transparency 90–92%, water content 20–39 wt%) are determined. Copyright © 2009 John Wiley & Sons, Ltd.     

蓖麻油聚氨酯和乙烯类聚合物互穿网络材料的生成特点及其动态力学性能

研究蓖麻油聚氨酯/取代乙烯共聚物的互穿网络物(IPN)的生成特点指出,其中取代乙烯游离基共聚的氧化还原引发剂组份-过氧化苯甲酰或二甲基苯胺都能加速聚氨酯网络(Pu)的生成。反应温度在 30℃以上蓖麻油也能参与游离基共聚。蓖麻油不仅与TDI反应生成Pu网络,而且也有小部分参与取代乙烯共聚物长枝链的形成。Pu网络的形成较长枝链的生成为快。生成Pu网络时所放出的热促进取代乙烯与少量蓖麻油的双键共聚,最后生成的IPN不溶于甲苯。这表明生成的是接技的半IPN,而不是单纯的半IPN。动态力学研究指出,包含聚苯乙烯或聚甲基丙烯酸甲酯的这种IPN呈现二个T_g,而只包含聚丙烯腈的仅一个T_g,说明后一IPN中相容性较好,有较多的分子混合。随着聚氨酯与聚取代乙烯的比例减少,二个T_g间的差距减少,而较高温度的T_g随取代乙烯共聚物中丙烯腈含量增加而变小。     

Development and characterization of a high-throughput system for assessing cell-surface receptor-ligand engagement

A nonfouling interfacial interpenetrating polymer network (IPN) of poly(acrylamide-co-ethylene glycol/acrylic acid) [p(AAm-co-EG/AAc)] was grafted to polystyrene for use as a novel platform for the development of high-throughput assays for screening of specific bimolecular interactions (i.e., receptor-ligand engagement). For the development of the IPN, a water-soluble hydrogen-abstracting photoinitiator was investigated: (4-benzoylbenzyl)trimethylammonium chloride. IPN-modified polystyrene surfaces were characterized using XPS, contact angle goniometry, and protein adsorption analysis. These IPN surfaces minimized fibrinogen adsorption compared to tissue culture polystyrene (>96% reduction), prevented mammalian cell adhesion, and served as nonfouling surfaces to graft biological ligands. For bimolecular interaction studies, a model peptide ligand from bone sialoprotein (Ac-CGGNGEPRGDTYRAY-NH(2)) was grafted to p(AAm-co-EG/AAc) via a 3400 M(w) linear pEG spacer. Ligand density measurements, cell culture, and a centrifugal adhesion assay were used to study cell adhesion to peptide-modified IPNs (i.e., receptor-ligand engagement). Ligand density (Gamma) was controllable from approximately 1 to 20 pmol/cm(2) by modulating the peptide input concentration (0.02-20 microM). Cell adhesion was directly dependent on the ligand density. This technology creates a powerful high-throughput system to simultaneously probe a myriad of cell-surface receptor-ligand interactions.     

Anionic Graft Copolymers. III. Hydrogenation of Polydienes Grafted with Vinylaromatics

A new method is described to prepare graft copolymers of polystyrene and polyvinylcyclohexane on polyethylene and poly (ethylene, butene-1). Hydrogenation of the butadiene moieties of graft copolymers of polystyrene on poly-1, 4-butadiene and high vinyl polybutadiene forms graft copolymers of polystyrene on polyethylene and on poly (ethylene, butene-1). Graft copolymers of polyvinylcyclohexane on polyethylene and on poly (ethylene, butene-1) are prepared by completely hydrogenating graft copolymers of polystyrene on poly-1, 4-butadiene and on high vinyl polybutadiene. The physical properties of these polymer systems depend on composition and graft level, resulting in either tough polymers or elastomers.