Separation of isochromatics and isopachics using a Faraday rotator in dynamic-holographic photoelasticity

A method is presented that allows the simultaneous separation of isochromatic- and isopachic-fringe patterns for transient-plane stress problems. Isopachic fringes are obtained by means of holography with a Faraday cell and a pulsed ruby laser flashing dual pulses. As usual isochromatic whole-order fringes are recorded in a circular-light polariscope. The shock generator (air-gun) and its synchronizing system with the ruby laser is described. The procedure is applied to the recording of the isochromatic- and isopachic-fringe patterns in a disk under radial dynamic loads.     

The rheological behaviour of HDPE/LDPE blends

The rheological behaviour of three types of HDPE/LDPE blends at several compositions (various weight percentages of LDPE) has been studied with the aid of a capillary rheometer and three different capillaries. In particular, entrance effects and shear viscosities have been determined over a wide shear rate region and at different temperatures. Thus activation energies could also be evaluated. Synergistic effects are evidenced when the relevant properties of the homopolymers parents are not too different from one another.     

Epon 828 epoxy: A new photoelastic-model material

The photoelastic properties of Epon 828 are discussed. The epoxy is evaluated experimentally for its time-edge effect, optical creep, stress-optic relations, and mechanical properties at room and elevated temperatures. Epon 828 is extremely clear, has good transparency, and can be use for photoelastic stress analysis at room and elevated temperatures. It has a low-fringe constant at room temperature as well as at elevated temperatures coupled with a high critical modulus of elasticity. Epon 828 can easily be cast stress-free and has relatively small amounts of optical and mechanical creep. The machining characteristics of Epon 828 are excellent and it cements easily with itself and other epoxy materials.     

Calculation of the rotational transition probabilities of diatomic molecules when they collide with heavy particles

The collisional rotational transition probabilities for molecule-molecule and molecule-atom interactions in three-dimensional space are calculated. The quasiclassical approach developed in [1] is used. Expressions are obtained that are suitable for practical calculations of single-quantum and double-quantum rotational transitions in diatomic molecules. The collisional rotational transition probabilities are averaged over the Maxwell velocity distribution and their dependence on the gas temperature is obtained. To illustrate the method the results of a calculation of the probabilities for HCl-HCl, HCl-He, CO-CO interaction are presented.     

An experimental study of the effects of prestrain on the propagation of small disturbances in neoprene filaments

A small disturbance was caused to propagate along a long, slender, prestrained Neoprene filament. The particle velocity of the pulse was measured at two stations along the length of the filament by means of electromagnetic transducers which operate on the Faraday principle. Particle velocity vs. time data were obtained from oscilloscope photographs of the transducer outputs for each level of prestrain from 0 percent up to 400 percent engineering strain. The two particle-velocity records for each level of prestrain were subjected to linear viscoelastic analysis which employed the use of numerical Fourier transforms of the particle-velocity records. Computer programs were written which allowed computation of the numerical transforms and from them the computation of the phase velocity and attenuation coefficients of the material over the narrow frequency bandwidth of the Fourier spectra of the particlevelocity pulses. Data analysis revealed that, at a given frequency, the phase velocity increases significantly and that the attenuation coefficient decreases significantly with an increase in prestrain level over the range of prestrains of the tests. These material properties, that of a decreasing attenuation and an increasing phase velocity with increasing prestrain, are suggestive of the open possibility of the ability of the material to develop and support a shock wave for a large-amplitude disturbance.     

An exploratory investigation of cumulative shock fatigue

A simple device for producing cumulative shock loading in solids is described. The device uses a ballistic-impact-driven projectile to introduce high-stress waves into a solid. The impact time and load amplitude can be varied to produce fracture in one or several impacts in PMMA rods. The wavefront approached a square wave shape. Materials other than PMMA were loaded to failure to demonstrate the versatility of the device. Fracture morphologies observed with optical and scanning-electron microscopy are described.     

Strain-gage-stability measurements for years at 75°C in air

The authors have evaluated the performance of three types of metal-foil strain gages for two and a half years at a constant temperature of 75°C in air. The studies included polyimide-backed and phenolic-glass-backed gages with copper-nickel foil (constantan) and glass-fiber-rein-forced epoxy-phenolic-resin-backed gages with nickel-chromium foil (modified Karma). All gages were tested in a three-wire-lead, single-active-gage Wheatstone bridge system at nominal mechanical-strain levels of 0, +1000 and ?1000 μm/m. The polyimide-backed constantan gages used in Installation No. 1 typically zero-shifted more than +200 μm/m after 30 days' testing at 75°C. The phenolic-glass-backed constantan gages used in Installation No. 2 zero-shifted ?40 to +20 μm/m after 30 days and +270 to +350 μm/m after 900 days. The glass-fiber-reinforced, epoxyphenolic-resin-backed Karma gages used in Installation No. 3 zero-shifted about +5 μm/m after 30 days, and +20 to +45 μm/m after 900 days. The Karma gages used in Installation No. 3 performed better than the other two types of gages. The measured results for the Karma gages appeared to be independent of the adhesives, test-part material, and mechanical-strain levels that we tested. The high stability and low zero drifts of this gage at 75°C allowed us to reliably correct the measured static-strain data on actual test parts.     

Performance of metal-foil strain gages during large cyclic strains

Constantan-alloy gages with polyimide backing were bonded to axial-fatigue specimens which were tested under cyclic loading. Constant-strain ranges between 0.0075 and 0.04 were applied to each specimen by means of a clip on extensometer, and the strain-gage signals were monitored for gage accuracy and life. Gage life varied upwards from about four cycles at the highest strains investigated. Although significant zero shift occurred, strain ranges were generally measured within five percent over most of the life of the gage. The gage-performance information obtained will aid in later study of local strain and low-cycle fatigue in notched members.     

A composite three-dimensional photoelastic method

Care must be taken in preparation and testing of three-dimensional composite photoelastic models. Some problems encountered in modeling the prototype and during model testing are: model-material failure, loss of fringe pattern in slicing, inherent shrinkage response in freezing, inadequate bonding between materials, and modular ratio difficulties. The selection of the correct plastic can eliminate the first four problems, but the correct modular ratio between the matrix and the insert has to be obtained. This investigation illustrated the behavior of commercially manufactured plastics as inserts, with a matrix material of Epon 828 epoxy. The effective moduli of elasticity of these plastics are reported for pure tension and for flexure. Since the manufactured plastics produced varying results, the use of Epon 828 epoxy as an insert was investigated. The inserts were cast in tygon tubing and their curing cycle was altered from that used for the matrix material to produce a different effective modulus of elasticity. The Epon 828 inserts gave excellent results in the beams. The use of the same material for matrix and insert eliminates many of the problems associated with composite three-dimensional photoelasticity.     

Machining unreinforced polymers with high-velocity water jets

Sapphire nozzles of 0.076-mm to 0.178-mm diameter have been used with a water intensifier, operating at pressures up to 4.2 kbar, to produce continuous jets with velocities around 6.6×10⁴ cm/s. These jets have been used to machine (slit) sheet specimens of polymethylmethacrylate (PMMA), polycarbonate and acetal at feed rates up to 4 cm/s. A previous paper describes the jet cutting system and analyzes data for PMMA and a phenolic laminate. This paper presents and analyzes data for polycarbonate and acetal; it also reanalyzes the PMMA data. A cutting theory described previously is modified and extended so that depth of cut can be directly related to nozzle pressure, jet flow rate, specimen feed rate and nozzle diameter. In its original form, this energy theory cannot account for the effect of changes in nozzle diameter. It is shown that there is excellent agreement between the predictions of the modified theory and the experimental data. The theory is also used to explain the surface appearance of a typical cut.     

The effect of a coupling agent on the viscoelastic properties and internal stresses in high density polyethylene filled with glass spheres

It is shown that covalent bonding between high density polyethylene (HDPE) and glass spheres can have a significant influence on the stress relaxation behaviour and the creep properties of the corresponding composites at room temperature. The bonding is obtained by reacting the glass spheres with an azide functional alkoxysilane which is capable of bonding to the HDPE-chain. The internal stress, evaluated from relaxation experiments, increased markedly as a result of this treatment, and it is suggested that the internal stress level reflects the properties of the interphase region between the filler and the bulk matrix and its effect on the viscoelastic properties.     

Numerical investigation of the instability of a shear discontinuity of the velocity in compressible gases

A numerical investigation is made of the nonlinear stage of development of the Kelvin-Helmholtz instability in the case of compressible gases.     

The grid-shift technique for moiré analysis of strain in solid propellants

Moiré principles and procedures were surveyed with a view toward adaptation to measurement of complex strain distribution in solid propellants. Compliant coating and photosensitive materials were selected for grid reproduction. The most flexible of the several possible procedures for recording moiré data was found to be grid photography. A novel “grid-shift” technique employing coarse grids was developed for point-by-point determination of surface displacement derivatives, and the grid-shift relations for large strain and large rotation were derived. The technique is extremely versatile, permitting the analysis of strain of dynamically deformed specimens in nonambient environmental conditions of temperature, pressure or atmosphere. The utility of the technique was demonstrated by application to static and dynamic problems.     

Wave motion in anisotropic media by dynamic photomechanics

Photomechanical techniques are developed for studying wave propagation in anisotropic media such as fiber-reinforced composites and rocks. Moiré fringes in transparent and opaque materials, and isochromatic fringes in transparent composites, are photographed at rates up to over one-million frames/second. A Beckman and Whitley 189 framing camera is utilized with illumination provided by argon flashbombs or a special electronic flash.     

An experimental study of food melt rheology. II. End pressure effects

A twin-screw extruder-fed slit die viscometer (SDV) and a piston capillary rheometer have been used to measure the end pressure losses of a low density polyethylene, maize grits and potato powder. The entrance and exit pressure losses have been measured as a function of extrusion conditions. The entrance pressure losses were found to be less than 10% of the total pressure drop in the SDV for LDPE and maize grits. For the potato material, this loss was found to be as large as 58%. The exit pressures for the potato were between 10–20% of the total pressure drop compared to negligible values for the maize and LDPE. Various approaches due to Bagley, Han and Cogswell were used to investigate the elastic properties of these materials.     

A image encryption scheme based on dynamical perturbation and linear feedback shift register

Because low-dimensional chaotic precision degradation has seriously affected the security of encryption, compound chaotic function is designed. It is based on two new one-dimensional chaotic functions. By the definition of Devaney chaotic, the properties of compound chaotic functions are rigidly proved. Based on the compound chaotic function and linear feedback shift register (LFSR), a new pseudo-random sequence generator is designed to generate a more random sequence and expand the key space. The properties of compound chaotic functions and LFSR are also established. In the scheme, a dynamic block division of the 3D baker and dynamical perturbation are illustrated using the compound chaotic map to derive the confusion image. The new pseudo-random sequence generator expands the key space and improves the security of image encryption scheme. The results of entropy analysis, difference analysis, weak-key analysis, statistical analysis, cipher random analysis, and cipher sensitivity analysis show that the encryption scheme has a better security. Compared with traditional encryption scheme and one-dimensional logistic chaotic map, the new image encryption scheme has a better performance in speed, complexity, and security. This paper illustrates how to solve the problem of short periods and low precision of one-dimensional chaotic function by perturbation and LFSR together.     

Investigation of the length and wave structure of the gas-dynamic section in straight and spreading gas jets

The results are given of an experimental investigation of the wave structure of straight and spreading gas jets. Dependences are obtained for the calculation of the length of the gas-dynamic part of straight and spreading gas jets.     

A method of simultaneously recording full-field isoclinic patterns at several isoclinic angles

In photoviscoelasticity, the difference in principal stresses at a point depends not only on the history of isochromatic-fringe order, but also on the history of isoclinic angle. Thus, meaningful interpretation of the isochromatic data in terms of stress cannot be made without knowledge of the isoclinic history. When the isoclinic angle is changing rapidly, the traditional method of rotating the polarizer-analyzer pair in a plane polariscope by mechanical means is limited by practical rotation rates. Magnetic rotation of the polarization, using the Faraday effect, is possible, but suffers from the problem that the isoclinic patterns are viewed sequentially. This limitation is also inherent in the slower mechanical-rotation method. This paper describes a new method of viewing several full-field isoclinic patterns simultaneously. Thus, the recording system has more time to make each record, and requirements on film speed and framing rates may be relaxed by an order of magnitude.     

A study of effective crack length using holographic interferometry

A technique using holographic interferometry and models of thin-sheet PMMA has been adapted to study the effective crack length for slots with rounded tips of various radii. The results suggest a rational means of applying sharp-crack fracture mechanics in certain nonideal situations and are compared with earlier studies.     

A technique for reducing the fringe frequency in large-displacement holography

The analytical method of superposition is combined with the experimental technique of multiple-exposure holography to decrease the sensitivity of holographic measurement by at least an order of magnitude. Moiré fringes of a lower frequency are produced which simultaneously extend the range of measurement to larger displacements. The method is demonstrated for the case of a clamped circular plate subjected to a concentrated load centrally applied.