Preparation of polymethyl methacrylate with well-controlled stereoregularity by anionic polymerization in an ionic liquid solvent

This study investigates the effect of ionic liquids (ILs) on the anionic polymerization of methyl methacrylate (MMA). Polymethyl methacrylate (PMMA), an isotactic polymer, is prepared by anionic polymerization at a high reaction temperature with an IL that acts as both solvent and additive. The most plausible reaction mechanism is determined using ¹H NMR and Fourier-transform infrared spectroscopy. The electrostatic interaction between MMA and the IL increases the apparent steric hindrance in MMA, resulting in the isotactic PMMA.     

Asymmetric anionic polymerization of optically active N-1-cyclohexylethylmaleimide

Chiral (S)-(−)-N-1-cyclohexylethylmaleimide [(S)-CEMI] and (R)-(+)-N-1-cyclohexylethylmaleimide [(R)-CEMI] were synthesized successfully and then polymerized with chiral complexes of (−)-sparteine or (S,S)-(1-ethylpropylidene)bis(4-benzyl-2-oxazoline) [(S,S)-Bnbox] and organometal as initiators in toluene or tetrahydrofuran to obtain optically active polymers. The effects of the polymerization conditions on the optical activity and structure of poly(N-1-cyclohexylethylmaleimide)s were investigated with gel permeation chromatography, circular dichroism, specific rotation, and ¹³C NMR measurements. Poly[(R)-CEMI] obtained with dimethylzinc (Me₂Zn)/(S,S)-Bnbox had the highest specific rotation ([α]₄₃₅ = +323.7°). Complexes of Bnbox and diethylzinc or Me₂Zn were used very effectively as chiral initiators for the asymmetric anionic polymerization of (S)-CEMI and (R)-CEMI. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4682–4692, 2004     

Mechanism of the anionic polymerization of methyl methacrylate initiated by tetramethylammonium–triphenylmethide in tetrahydrofuran

A tetramethylammonium (TMA)–triphenylmethide (TPM) initiator generated in situ by the reaction of trimethyltriphenylmethylsilane with tetramethylammonium fluoride in tetrahydrofuran was found to have greater stability than the corresponding tetrabutylammonium or tetrahexylammonium derivatives. The predominant mode of degradation of TMA–TPM was found to be the TMA‐mediated methylation of TPM anions. The initiation of methyl methacrylate by TMA–TPM in tetrahydrofuran at ?78 °C was demonstrated to produce quantitative yields of poly(methyl methacrylate) with polydispersities of less than 1.1. Although the initiator efficiencies were low (9–40%) because of relatively slow initiation on the polymerization timescale, the initiation appeared to be rapid enough to give relatively narrow molecular weight distributions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 237–244, 2004     

Comments on the determination of absolute rate constants in anionic polymerization

Claims have recently been made that absolute rate constants for chain propagation of the unassociated active centers can be made in systems where a high degree of association is present. Anionic polymerization of styrene in nonpolar solvents with lithium as counterion is a typical case. The conditions required to obtain these constants (and the associated aggregate dissociation constants) are described using data from styrene polymerization with lithium and potassium as counterions and data from o-methoxystyrene polymerization. The conclusion reached must be that the k_p and K_ds values obtained for styrene with counterion lithium cannot be obtained from existing literature data and are simply artifacts of the computer analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1065–1068, 1998     

Preparation of functional polymers by living anionic polymerization: Polymerization of allyl methacrylate

The anionic polymerization of allyl methacrylate was carried out in tetrahydrofuran, both in the presence and in the absence of LiCl, with a variety of initiators, at various temperatures. It was found that (1,1-diphenylhexyl)lithium and the living oligomers of methyl methacrylate and tert-butyl methacrylate are suitable initiators for the anionic polymerization of this monomer. The temperature should be below −30°C, even in the presence of LiCl, for the living polymerization to occur. When the polymerization proceeded at −60°C, in the presence of LiCl, with (1,1-diphenylhexyl)-lithium as initiator, the number-average molecular weight of the polymer was directly proportional to the monomer conversion and monodisperse poly(allyl methacrylate)s with high molecular weights were obtained. ¹H-NMR and FT-IR indicated that the α CC double bond of the monomer was selectively polymerized and that the allyl group remained unreacted. The prepared poly(allyl methacrylate) is a functional polymer since it contains a reactive CC double bond on each repeating unit. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2901–2906, 1997     

Anionic and ionic coordinative polymerization of L-lactide

The potassium naphthalenide complex with 18-crown-6 is able to initiate anionic polymerization of L -lactide at 20°C. This type of anionic initiator does not have to be removed from the polymer as it does not affect metabolic processes. The ionic polymerization of L -lactide with an initiator based on Zn(II) acetyl acetonate, which is fairly stable, has been investigated. It has been found that this process leads to the corresponding polyesters, at high yields. © 1998 John Wiley & Sons, Ltd.     

Historical perspectives on living anionic polymerization

A brief overview of the role that Dr. Michael Szwarc has played in unraveling the mechanism of living anionic polymerization is presented. Emphasis is placed on the different ionic species that control the propagation reaction in ether-type solvents. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2101–2107, 2002     

提高聚环氧丙烷分子量的研究

本文采用丙二醇—钾、丙二醇引发环氧丙烷（PO）的阴离子聚合，同时加入络合剂，发现聚合反应速度加快，同时能有效提高聚环氧丙烷（PPO）的分子量。通过探索合成工艺条件，得到了■为4，000的线型聚环氧丙烷。     

Functional polymers by living anionic polymerization

The application of living anionic polymerization techniques for the functionalization of polymers and block copolymers is reviewed. The attachment of functional groups to polymeric chains of predetermined lengths and narrow molecular weight distributions is described. Carboxyls, hydroxyls, amines, halogens, double bonds, and many other functional groups can be placed at one or two ends in the center or evenly spaced along polymeric chains. Subsequent transformations of the functional groups further contribute to the versatility of such treatments. General methods based on the use, as terminators, of substituted haloalkanes, as well as the addition of living polymers or their initiators to diphenylethylenes, substituted with appropriate functional groups or molecules, are discussed. Another approach, based on the living polymerization of monomers with protected functional groups, is also discussed. It has been used for the preparation of polymers and copolymers with evenly spaced functional groups. The combination of living anionic polymerization techniques with controlled radical and cationic polymerizations is also described. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2116–2133, 2002     

苯乙烯阴离子本体聚合引发剂缔合及其机理的研究

分别以正丁基锂和叔丁基锂为引发剂,采用自制管式流动反应装置,对较高温度下苯乙烯阴离子本体聚合动力学进行了研究.证实了正丁基锂主要以六元缔合结构形式引发聚合,并导致超分子团聚体的形成,从而使进一步的聚合因单体扩散受阻而受到限制,并伴随聚合转化率停滞平台（SCP）的产生.随后由于前期聚合累积的能量,使超分子结构完全解离.聚合温度越高,SCP持续时间越短.结果还表明,在正丁基锂引发剂中,存在一个以六元缔合结构为基础形成的更大的缔合体结构.原子力显微镜照片显示,超分子结构的直径分别为20～30nm和50～60nm.此外,在阴离子聚合过程中活性种的缔合结构只决定于初始引发剂的分子结构,而不同活性种缔合结构对阴离子聚合的链增长存在很大影响,从而解释了采用不同结构的锂系引发剂引发苯乙烯单体聚合时聚合速率存在巨大差异的原因.     

Asymmetric anionic polymerization of maleimides bearing bulky substituents

Asymmetric anionic homopolymerizations of N‐substituted maleimide (RMI) bearing bulky substituents [R = benzyl, diphenylmethyl (DPhMI), 9‐fluorenyl (9‐FlMI), triphenylmethyl, (diphenylmethyloxycarbonyl)methyl, (9‐fluorenyloxycarbonyl)methyl] were carried out with complexes of organometal compounds (alkyllithium, diethylzinc) with six chiral ligands to obtain optically active polymers. The chiroptical properties of the polymers were affected strongly by the substituents on nitrogen in the maleimide ring, the organometal and chiral ligands. Poly(DPhMI) initiated by an n‐butyllithium/(−)‐sparteine (Sp) complex showed a positive specific rotation ([α] +60.3°). Poly(9‐FlMI) prepared with a florenyllithium/Sp complex exhibited the highest specific rotation (+65.7°). The specific rotations of the poly(RMI) obtained were attributed to different contents between the stereogenic centers (S,S) and (R,R) based on threo‐diisotactic structures of the main chain. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 310–320, 2000     

Hindered lithium dialkylamide initiators for the living anionic polymerization of methacrylic esters

Lithium diisopropylamide is an efficient initiator for the anionic polymerization of methyl methacrylate in polar solvents at –78°C. Predictable molecular weights based on the initiator concentration were obtained, yields were quantitative, and molecular weight distributions were relatively narrow (<1.30). The presence of an amino end group and confirmation of the initiation mechanism were confirmed by potentiometric titration using HClO₄. Number-average molecular weights determined by titration agreed well with values determined by SEC. Other lithium dialkylamides that contain larger alkyl groups such as lithium diisobutylamide were less efficient initiators. This was attributed to the more nucleophilic anion due to less steric hindrance near the nitrogen atom. Molecular weight distributions were significantly broadened (>2.0), and molecular weight control was not achieved. However, polymer yields were quantitative. In all cases, PMMA stereochemistry was indicative of a solvent-separated lithium counterion, and triad compositions were identical to organolithium initiated homopolymers, i.e., 78% syndiotactic, 20% heterotactic, and 2% isotactic. © 1994 John Wiley & Sons, Inc.     

Initiation mechanisms of an anionic ring‐opening polymerization of lactam‐12

A novel liquid system has been developed to initiate the anionic polymerization of lactam‐12. This system, containing both an activator and a catalyst, has the primary advantage over previous systems of permitting infinite storage of the reactant, and it avoids premixing of batches. The anionic species of the system were identified with matrix‐assisted laser desorption/ionization time‐of‐flight measurements, and Fourier transform infrared was used to measure the change in their concentrations during the polymerization. A guanidine anion was formed, and the system initiated the polymerization by this guanidine and by the catalyst. The kinetics of the anionic polymerization of lactam‐12 into polyamide‐12 were followed with differential scanning calorimetry measurements. The determined reaction rates indicated that this liquid system was particularly well suited for initiating in situ polymerization during liquid molding. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3406–3415, 2002     

Asymmetric polymerization of aromatic isocyanates with optically active anionic initiators

The asymmetric anionic polymerization of o-, m-, and p-methylphenyl isocyanates, p-methoxyphenyl isocyanate, p-chlorophenyl isocyanate, 2,6- and 3,4-dimethylphenyl isocyanates, and 1-naphthyl isocyanate was carried out using chiral anionic initiators such as the lithium salts of (?) -menthol, (?) -(2-methoxymethyl) pyrrolidine, and (+) -1-(2-pyrrolidinylmethyl) pyrrolidine. Although o-methylphenyl isocyanate gave an insoluble polymer and 2,6-dimethylphenyl isocyanate afforded no polymer, the other monomers gave soluble polymers, which showed optical activity due to the prevailing helicity of the polymer chain induced by chiral initiator residues attached to the α-end of the polymer chain. The molecular mechanics conformational calculation for a tetramer of m-methylphenyl isocyanate supported the helical conformation of the main chain. The optical rotation of the polymers depended significantly on temperature. © 1994 John Wiley & Sons, Inc.     

Asymmetric polymerization of N-vinylcarbazole with optically active anionic initiators

The anionic polymerization of N-vinylcarbazole(NVC) by using optically active anionic initiators such as the lithium salts of(S)-1-(9H-fluoren-2-yl)-4-isopropyl-4,5-dihydrooxazole((S)-1-FIDH) and(S)-2-(9H-fluoren-2-yl)-4-isopropyl-4,5-dihydrooxazole((S)-2-FIDH) and complexes of(-)-Sparteine with n-butylithium(n-Bu Li-(-)-Sp) or fluorenyl lithium(FILi-(-)-Sp) was achieved. The yield and specific rotation of poly(N-vinylcarbazole)s(poly(NVC)s) were considerably affected by the molar ratio of(S)-FIDH to NVC. The highest yield and specific rotation were obtained with Li-(S)-1-FIDH as an initiator, with a molar ratio of monomer and initiator [M]/[I] = 10/1. The effects of the chiral initiators, type of solvent and the polymerization temperature were investigated. The obtained optical activity of polymers was attributed to asymmetric induction of the chiral initiators.     

Electronic excitation in anionic polymerization of butadiene: Nonempirical calculations of reaction complexes

A new mechanism of anionic polymerization of butadiene is proposed. In the elementary chemical act, the “living” polymer–monomer complex is excited into the low‐lying triplet state. This state has the character of charge (electron) and cation (Li⁺ or Na⁺) transfer from the terminal unit of the active center to the monomer molecule. In the framework of this concept, the probability of chemical bond formation is determined by spin density on radical centers of reagent molecules. Semiempirical and ab initio 6‐31G** quantum‐chemical calculations showed stable interaction between components of the complex in the ground electronic state (9–11 kcal/mol) and low energy levels of triplet excited states (<14 kcal/mol). This new approach is shown to be useful in the analysis of polymerization kinetics and the microstructure of polybutadiene depending on the cation type and the ion pair state. The mechanism of cis‐trans isomerization in the terminal unit of the living polymer consists in concerted rotation about the C_β? C_γ bond and the migration of Li between C_α and C_γ atoms. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Anionic ring-opening polymerization behavior of trans-cyclohexene carbonate using metal tert-butoxides: Construction of living anionic ring-opening polymerization by lithium tert-butoxide

Anionic ring-opening polymerization (ROP) behavior of trans-cyclohexene carbonate (CHC) using metal alkoxides as initiators was investigated. As a result, lithium tert-butoxide-initiated ROP of CHC with a high-monomer concentration (10 M) at low temperature (−15 to −10°C) proceeded to afford a poly(trans-cyclohexene carbonate) (PCHC) without undesired side reactions such as mainly backbiting. The suppression of side reactions enables the control of the molecular weight (M_n = 2400–6100) of PCHC with low molar-mass dispersity values (M_w/M_n = 1.16–1.22). Furthermore, by increasing the feed ratio of the monomer to the initiator, the molecular weight increases proportionally, indicating a controllable polymerization. The results of a matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis, a kinetic study, and a chain extension experiment suggested a living nature of this ROP using lithium tert-butoxide.     

Living anionic polymerization of ethylphenylketene: A novel approach to well‐defined polyester synthesis

A living polymerization of ethylphenylketene (EPK) was accomplished. When polymerization of EPK was carried out with butyllithium as an initiator in tetrahydrofuran (THF) at −20 °C, EPK was completely consumed within 5 min, and the corresponding polyester with narrow molecular weight distribution (M_w /M_n ∼ 1.1) was obtained almost quantitatively. Kinetic study of the polymerization at −78 °C revealed that conversion of EPK agreed with the first‐order kinetic equation, and that M_n of the polymer increased in virtually direct proportion to the conversion. Along with these results, successful results in postpolymerization at −20 °C strongly supported living mechanism of the present polymerization. Further, lithium alkoxides having a methoxy group, styryl moiety, and nitroxyl radical, also successfully initiated polymerization of EPK to afford the corresponding polymers having functional initiating ends. In the polymerization with varying feed ratio [EPK]₀/[initiator]₀, the linear relationship between the feed ratio and M_n of the obtained polymer was observed, while maintaining narrow M_w /M_n. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1073–1082, 2000