Furyl-maleimidein situ generated ab-monomers: Synthesis,characterization, and Diels-Alder polymerization

2-Furoyl chloride reacted with the monomaleamic acids 1a-1d derived from a aromatic diamine to yield a new series of maleamic acids 2a–2d . The latter were cyclodehydrated to afford maleimides 3a-3d which behaved as AB-monomers for a Diels-Alder polymerization. In addition, the monomaleamic acid 4 derived from 4-aminophenol reacted with 2-furoyl chloride to yield maleamic acid 5 . It was cyclodehydrated to maleimide 6 which is a novel polymer precursor. The monomers were characterized by IR and ¹H-NMR spectroscopy. Their thermal polymerization was investigated by DTA. Maleamic acids 2a–2d and 5 were cured at 280°C for 22 h to yield polymers which were characterized by TGA and isothermal gravimetric analysis (IGA). They were stable up to 340–376°C and afforded anaerobic char yield of 55–64% at 800°C. © 1992 John Wiley & Sons, Inc.     

Polyimides derived from diels-alder polymerization of furfuryl-substituted maleamic acids or from the reaction of bismaleamic with bisfurfurylpyromellitamic acids

Certain AB or AA and BB Diels-Alder polymer precursors bearing maleimide and furan segments were synthesized, characterized, and polymerized. Particularly, the monomaleamic acid derived from 4,4'-diaminodiphenylmethane, reacted with the monofurfurylpyromellitamic acid to yield a triamic acid which was cyclodehydrated to the corresponding triimide. A polyimide was obtained upon heat-curing of triimide or the intermediate triamic acid. In addition, equimolar amounts of N,N'-bismaleimido-4,4'-diphenylmethane (BMDM) and bisfurfurylpyromellitimide or their intermediate diamic acids were cured to afford a polyimide. The polymer precursors were characterized by IR and ¹H-NMR spectroscopy and their curing behavior was investigated by DTA. It was shown that the Diels-Alder polymerization of monomers took place at lower temperature than that required for crosslinking of BMDM. The thermal stabilities of polymers were ascertained by TGA and isothermal gravimetric analysis (IGA). The synthesized Diels-Alder polymers were remarkably more heat-resistant than the crosslinked polymer obtained from BMDM or its intermediate bismaleamic acid. They were stable up to about 360°C in N₂ or air and afforded anaerobic char yield of 58% at 800°C. © 1992 John Wiley & Sons, Inc.     

Thermoreversible nonlinear diels‐alder polymerization of furan/plant oil monomers

Novel trifunctional monomers based on renewable resources were prepared and subsequently polymerized via the Diels‐Alder (DA) polycondensation between furan and maleimide complementary moieties. Three basic approaches were considered for these nonlinear DA polycondensations, namely the use of (i) a bisfuran monomer in combination with a trismaleimide (A₂ + B₃ system) and (ii) a trisfuran monomer in conjunction with a bismaleimide (A₃ + B₂ system) leading to branched or crosslinked materials, and (iii) the use of monomers incorporating both furan and maleimide end groups (A₂B or AB₂ systems), which lead to hyperbranched structures. The application of the retro‐DA reaction to the ensuing polymers confirmed their thermoreversible character. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Various polycarbonate graft copolymers via diels–alder click reaction

In this work, we used Diels–Alder click reaction for the preparation of various types of aliphatic polycarbonates (PCs). We first prepared a novel anthracene‐functionalized cyclic carbonate monomer, anthracen‐9‐ylmethyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate (2), followed by ring‐opening polymerization of this monomer to prepare PC with pendant anthracene groups (PC‐anthracene) using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU)/1‐(3,5‐bis(trifloromethyl)phenyl)‐3‐cyclohexylthiourea (TU) as the catalyst and benzyl alcohol as the initiator in CH₂Cl₂ at room temperature. Subsequently, the resulting PC‐anthracene (M_n,TDGPC = 6000 g/mol, M_w/M_n = 1.22) was grafted with a linear α‐furan protected‐maleimide terminated‐poly(methyl methacrylate) (PMMA‐MI) (M_n,GPC = 3100 g/mol, M_w/M_n = 1.31), or poly(ethylene glycol) (PEG‐MI) (M_n,GPC = 550 g/mol, M_w/M_n = 1.09), or a mixture of PMMA‐MI and PEG‐MI to yield well‐defined PC graft or hetero graft copolymers, PC‐g‐PMMA (M_n,TDGPC = 59000 g/mol, M_w/M_n = 1.22) or PC‐g‐PEG, or PC‐g‐(PMMA)‐co‐PC‐g‐(PEG) (M_n,TDGPC = 39900 g/mol, M_w/M_n = 1.16), respectively, using Diels–Alder click reaction in toluene at 110°C. The Diels–Alder grafting efficiencies were found to be over 97% using UV spectroscopy. Moreover, the structural analyses and the molecular weights of resulting graft copolymers were determined via ¹H NMR and triple detection GPC (TD‐GPC), respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of 1‐methoxypoly(oxyethylene)benzocyclobutene and its diels–alder reactions

A new poly(ethylene glycol) derivative, 1‐methoxypoly(oxyethylene)benzocyclobutene ( 1 ) was prepared from the reaction of 1‐benzocyclobutenyl 1‐hydroxyethyl ether with mesylate of methoxypoly(oxyethylene) in tetrahydrofuran. The degree of end‐group conversion, as determined by NMR, was 100%. The Diels–Alder reactions of 1 with maleic anhydride and N‐phenylmaleimide were carried out in refluxing toluene to obtain the corresponding adducts ( 2 and 3 , respectively) in excellent yields. NMR analyses of 2 and 3 indicated complete conversion of 1 to the corresponding products. The reaction of 2 with o‐toluidine resulted in complete conversion of the anhydride adduct to the corresponding products. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1934–1938, 2004     

Some applications of the diels–alder reaction in organosilicon chemistry

A review of advances in the applications of the Diels–Alder reaction in organosilicon chemistry in our laboratory is presented. Using this reaction, we have synthesized a series of organosilicon monomers and polymers with polyphenyl groups and condensed rings and established a novel vulcanization system for silicone rubber. In addition, we discuss the influences of the large aromatic groups on the properties of the polymers.     

A tailor‐made polymethacrylate bearing a reactive diene in reversible diels–alder reaction

A tailor‐made polymethacrylate bearing a pendant furfuryl group was prepared by atom transfer radical polymerization (ATRP), an important method of recent advances in controlled radical polymerization. It was otherwise difficult to prepare via conventional radical polymerization, because of several side reactions involving the reactive diene functionality of the furfuryl group. Successful Diels–Alder (DA) chemistry was carried out using this reactive furfuryl group of the tailor‐made polymer as diene and a bismaleimide as a dienophile. Interestingly, the resultant material was observed to be thermoreversible as evidenced by FT‐IR and DSC studies. This example of application of a tailor‐made polymer having controlled molecular architecture and with reactive diene functionality in DA chemistry will open new possibilities to prepare newer tailor‐made reversible materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4441–4449, 2007     

Thermoreversible reaction of diels—alder polymer composed of difurufuryladipate with bismaleimidodiphenylmethane

Thermoreversible reaction of Diels-Alder polymer composed of difurufuryladipate with bismaleimidodiphenylmethane was studied in dimethylformamide solution. The retro-Diels-Alder degradation occurred gradually at 90°C and Diels–Alder polymerization proceeded quickly at 60°C. © 1994 John Wiley & Sons, Inc.     

Synthesis of new polyimides by Diels–Alder reaction of bis(2-pyrone)s with bismaleimides

The reaction of various substituted bis(2-pyrone)s with bismaleimides in dilute solution was carried out to produce linear soluble polymers with coronand structure. The number-average molecular weights of the polymers ranged from 7000 to 18,000 (vapor pressure osmometry). Polymer structures were identified by NMR spectroscopy and model reactions. The stereochemistry and the mechanism are discussed. © 1995 John Wiley & Sons, Inc.     

Synthesis,characterization and thermooxidative stability of addition polymers from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracene and anthracene end-capped imide oligomers

A series of Diels–Alder addition-type copolymers prepared from 1,4,5,8-tetrahydro-1,4;5,8-diepoxyanthracence and anthracene end-capped 6F-PDA imide oligomers were characterized. The composition of the anthracene end-capped imide oligomers was found to be sensitive to monomer molar ratios and the mode of monomer addition. The resistance of the copolymer to thermooxidative degradation at 316 and 371°C was compared with a similar commercial polymer called Avimid-N prepared from 4,4′-hexafluoroisopropylidene-2,2′ bis(phthalic acid anhydride) and para-and meta-phenylene diamine, abbreviated 6F-PDA. There are strong indications that the copolymers undergo degradation initially by unzipping the diepoxyanthracene unit from the anthracene end-capped 6F-PDA oligomer unit (Avimid-N like repeat unit), followed by a slower degradation of the more stable residual 6F-PDA unit. © 1993 John Wiley & Sons, Inc.     

Substituent chemical shifts of N‐arylsuccinanilic acids,N‐arylsuccinimides,N‐arylmaleanilic acids,and N‐arylmaleimides

NMR spectra of a series of N‐arylsuccinanilic acids, N‐arylsuccinimides, N‐arylmaleanilic acids, and N‐arylmaleimides were examined to estimate the electronic effect of the amide and imide groups on the chemical shifts of the hydrogen and carbon nuclei of the benzene ring. Copyright © 2009 John Wiley & Sons, Ltd.     

Benzocyclobutene in polymer synthesis. II. Solid state diels–alder polymerization utilizing an in situ generated diene and an alkyne

A novel class of aromatic imide AB-monomers with benzocyclobutene and an alkyne (primarily phenylethynyl group) as the reactive units have been prepared. The monomers have been utilized in thermally induced Diels–Alder polymerizations. The differential scanning calorimetric study of the AB-monomers provided two observations: (i) primary acetylene began its homopolymerization (202°C max.) before the electrocyclic ring opening of benzocyclobutene (270°C max.); (ii) the phenoxy group connecting between phenylacetylenyl group and the aromatic imide fragment suppressed polymerization in Diels–Alder fashion. Furthermore, thermoxidative stability evaluation on the cured samples (250°C for 8 h and then 350°C for another 8 h under N₂ atmosphere), carried out at 650°F (air) for 200 h, indicated the more rigid phenylethynyl phthalimide system was the most heat-resistant.     

Radical copolymerization of N‐phenylmaleimide and diene monomers in competition with diels–alder reaction

Radical copolymerization of N‐phenylmaleimide (PhMI) is carried out with various diene monomers including naturally occurring compounds and the copolymers are efficiently produced by the suppression of Diels–Alder reaction as the competitive side reaction. Diene monomers with an exomethylene moiety and a fixed s‐trans diene structure, such as 3‐methylenecyclopentene and 4‐isopropyl‐1‐methyl‐3‐methylenecyclohexene, exhibit high copolymerization reactivity to produce a high‐molecular‐weight copolymer in a high yield. The copolymerization of sterically hindered noncyclic diene monomers, such as 2,4‐dimethyl‐1,3‐pentadiene and 2,4‐hexadiene, also results in the formation of a high‐molecular‐weight copolymer in a moderate yield. The NMR spectroscopy reveals that the obtained copolymers consist of predominant 1,4‐repeating structures for the corresponding diene unit. The copolymers have excellent thermal stability, that is, an onset temperature of decomposition over 330 °C and a glass transition temperature over 130 °C. The copolymerization reactivity of these diene monomers is discussed based on the results of the DFT calculations. The efficient copolymer formation in competition with Diels–Alder addition is investigated under various conditions of the temperature, solvents, and initiators used for the copolymerization. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 3616–3625.     

Preparation of ABC miktoarm star terpolymer containing poly(ethylene glycol), polystyrene,and poly(tert‐butylacrylate) arms by combining diels–alder reaction,atom transfer radical,and stable free radical polymerization routes

The ABC type miktoarm star terpolymer was prepared utilizing “core‐in” and “core‐out” methods via combination of Diels–Alder reaction (DA), stable free radical polymerization (SFRP), and atom transfer radical polymerization (ATRP). First, in DA reaction, poly(ethylene glycol)‐maleimide (PEG‐maleimide) precursor was reacted with succinic acid anthracen‐9‐ylmethyl ester 3‐(2‐bromo‐2‐methyl‐propionyloxy)‐2‐methyl‐2‐[2‐phenyl‐2‐(2,2,6,6‐tetramethyl‐piperidin‐1‐yloxy)‐ethoxy‐carbonyl]‐propyl ester, 8 , to give DA adduct, 9 , which has appropriate functional groups for SFRP and ATRP. Second, a previously obtained 9 was used as a macroinitiator for SFRP of styrene at 125 °C. As a third step, this PEG‐polystyrene (PEG‐PSt) precursor with a bromine functionality in the core was employed as a macroinitiator for ATRP of tert‐butylacrylate (tBA) in the presence of Cu(I)Br and pentamethyldiethylenetriamine at 80 °C to give ABC type miktoarm star terpolymer (PEG‐PSt‐PtBA) with controlled molecular weight and low polydispersity (M_w/M_n < 1.27). The obtained polymers were characterized by gel permeation chromatography and ¹H NMR. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 499–509, 2006     

Healable network polymers bearing flexible poly(lauryl methacrylate) chains via thermo‐reversible furan‐maleimide diels–alder reaction

A new ATRP initiator containing two furyl rings, namely, bis(furan‐2‐ylmethyl) 2‐bromopentanedioate was synthesized starting from commercially available l ‐glutamic acid as a precursor. Well‐defined bisfuryl‐terminated poly(lauryl methacrylate) macromonomers with molecular weight and dispersity in the range 5000–12,000 g mol^?1 and 1.30–1.37, respectively, were synthesized employing the initiator by atom transfer radical polymerization (ATRP). Independently, 1,1′,1″‐(nitrilotris(ethane‐2,1‐diyl))tris(1H‐pyrrole‐2,5‐dione) was synthesized as a tris‐maleimide counterpart for furan‐maleimide click reaction. Thermo‐reversible network polymer bearing flexible poly(lauryl methacrylate; (PLMA) chains was obtained by furan‐maleimide Diels–Alder click reaction of bisfuryl‐terminated PLMA with 1,1′,1″‐(nitrilotris(ethane‐2,1‐diyl))tris(1H‐pyrrole‐2,5‐dione). The prepared network polymer showed retro‐Diels–Alder reaction in the temperature range 110–170 °C as determined from DSC analysis. The presence of low Tg (–40 °C) PLMA chains induced chain mobility to the network structure which led to the complete scratch healing of the coating at 60 °C in five days due to furan‐maleimide adduct formation. The storage modulus of the network polymer was found to be 3.7 × 10⁴ Pa at the constant angular frequency of 5 rad/sec and strain of 0.5%. The regular reversal of storage (G ′) and loss modulus (G ″) was observed with repeated heating (40 to 110 °C) and cooling cycles (110 to 40 °C) at constant angular frequency and strain. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2700–2712     

Synthesis and anionic polymerization of optically active N-phenylmaleimides bearing bulky oxazoline substituents

Anionic polymerizations of chiral N-phenylmaleimide derivatives bearing an oxazoline pendant (OPMI) were carried out with n-BuLi initiator to obtain optically active polymers. The polymer yields and specific optical rotations () were found to be significantly influenced by the reaction solvent, temperature, and the molar ratio of initiator to monomer. Particularly, the specific optical rotations exhibited a linear dependence on the molecular weights for the formed polymers, and the inversion from levo- to dextro-specific rotation was also observed with an increase in the molecular weights. On the basis of the results from circular dichroism (CD) and ¹³C NMR spectral analyses, the optical activity of poly(OPMI)s was attributed not only to the chirality of oxazolinyl groups in monomeric units but also to the partial helical structure due to an excess of threo-diisotactic configuration in the main chain.     

Synthesis of tadpole polymers via triple click reactions: Copper‐catalyzed azide–alkyne cycloaddition,diels–alder,and nitroxide radical coupling reactions

We designed a trifunctional initiator ( 3 ) containing anthracene, bromide, and OH functionalities and subsequently used as an initiator in atom transfer radical Polymerization (ATRP) of styrene to yield linear polystyrene (PS) with α‐anthracene, OH, and ω‐bromide terminal groups, of which bromide is later transformed into azide to result in the linear anthracene‐, OH‐, and azide‐terminated PS (l‐α‐anthracene‐OH‐ω‐azide‐PS). The copper‐catalyzed azide–alkyne cycloaddition reaction between l‐α‐anthracene‐OH‐ω‐azide‐PS and α‐furan‐protected‐maleimide‐ω‐alkyne linkage, 4 afforded the linear anthracene‐, OH‐, and maleimide‐terminated PS. The cyclization via intramolecular Diels–Alder click reaction of this linear PS and the subsequent conversion of the hydroxyl into bromide resulted in the cyclic PS with one bromide located on the ring, (c‐PS)‐Br. Finally, the c‐PS‐Br was clicked with either well‐defined tetramethylpiperidine‐1‐oxyl‐terminated poly(ethylene glycol) (PEG) or poly(ε‐caprolactone) (PCL) yielding the tadpole polymer, (c‐PS)‐b‐PEG or (c‐PS)‐b‐PCL. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Heterograft brush copolymers via romp and triple click reaction strategies involving CuAAC,diels–alder,and nitroxide radical coupling reactions

In this study, an equimolar mixture of oxanorbornenyl‐anthracene (ONB‐anthracene), oxanorbornenyl‐bromide (ONB‐Br), and oxanorbornenyl tosylate (ONB‐OTs) was polymerized via ring opening metathesis polymerization using the first generation Grubbs' catalyst in CH₂Cl₂ at room temperature to form poly(ONB‐anthracene‐co‐ONB‐Br‐co‐ONB‐OTs)₁₀ copolymer as a main backbone. Next, this main backbone was sequentially clicked with a furan protected maleimide‐terminated poly(methyl methacrylate), 2,2,6,6‐tetramethyl‐1‐piperidinyloxy‐terminated poly(ethylene glycol), and alkyne‐terminated poly(ε‐caprolactone) (PCL₂₀‐alkyne) via Diels–Alder, nitroxide radical coupling, and copper‐catalyzed azide‐alkyne cycloaddition, respectively, to yield a poly(ONB‐g‐PMMA‐co‐ONB‐g‐PEG‐co‐ONB‐g‐PCL)₁₀ heterograft brush copolymer © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Hydrogen transfer in the retro diels–alder fragmentation of oxygen-containing heterocyclic compounds. II—Chromones

Mass Spectra of unsubstituted, 2-methyl-, 3-methyl and 2,3-dimethylchromones were examined. These compounds showed [RDA]⁺˙ and [RDA + H]⁺ ions as characteristc ions, together with [M? H]⁺,[M? CO]⁺˙,[M? CHO]⁺ and [RDA? CO]⁺˙ ions. Based on deuterium labelling experiments and measurement of metastable peaks by the ion kinetic energy defocusing technique, the origin of transferred hydrogen in the [RDA + H]⁺ ion was clarified. The mechanism of the [RDA + H]⁺ ion formation is discussed.     

Synthesis of divinylbenzene–maleic anhydride microspheres using precipitation polymerization

Narrow disperse micron-range divinylbenzene-maleic anhydride microspheres have been prepared in near quantitative yields using precipitation polymerization. A variety of solvents were investigated for use as the reaction medium with a 40:60 mixture of methyl ethyl ketone and heptane providing the best results. The effects of solvent composition on particle size and morphology and monomer loading effects were also investigated. Particle size decreased with increasing solvency (increasing MEK fraction) while increases in monomer loading caused larger particle sizes. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2223–2227, 1998