Photopolymerization of styrene,p-chlorostyrene,methyl methacrylate,and butyl methacrylate with polymethylphenylsilane as photoinitiator

The rates of photochemical polymerization of styrene (St), p-chlorostyrene (Cl-St), methyl methacrylate (MMA), and butyl methacrylate (BMA) with polymethylphenylsilane (PMPS) as an initiator were measured. Polymethylphenylsilane is photodegrated to form silyl radicals that may initiate polymerization of vinyl monomers. Rate constants k_p and k_t have been determined for these systems. A good correlation (log P = α + βμ) of the resonance stabilization (P) of the chain radicals and the dipole moment (μ) of the monomers is observed for these polymerization systems. This equation may be used to estimate the resonance stabilization (P) of a monomer and the polymerization rate constant (k_p). © 1996 John Wiley & Sons, Inc.     

Synthesis and asymmetric polymerization of a series of methyl‐substituted triphenylmethyl methacrylate

Five novel ortho‐, meta‐, and para‐methyl‐substituted triphenylmethyl methacrylate monomers, such as o‐tolyldiphenylmethyl methacrylate (o‐MeTrMA), di‐o‐tolylphenylmethyl methacrylate (o‐Me₂TrMA), tris‐o‐tolylmethyl methacrylate (o‐Me₃TrMA), tris‐m‐tolylmethyl methacrylate (m‐Me₃TrMA), and tris‐p‐tolylmethyl methacrylate (p‐Me₃TrMA) have been synthesized. The methanolysis rates of these monomers were measured in CDCl₃‐CD₃OD (1:1, v/v) by ¹H NMR spectroscopy at 30 °C. It was found that the order of the methanolysis rates would be TrMA<o‐MeTrMA<o‐Me₂TrMA<o‐Me₃TrMA<m‐Me₃TrMA except p‐Me₃TrMA, which exhibited very good stability to methanolysis. The asymmetric polymerization of these monomers was investigated by chiral anionic complexes as initiators. The results showed that the ability to form a helical chain was effected not only by the types of chiral complex initiators, but also by the position and number of methyl‐substituted groups at the benzene rings of TrMA. The order of the ability of polymerization was o‐MeTrMA >o‐Me₂TrMA>o‐Me₃TrMA and m‐Me₃TrMA> p‐Me₃TrMA>o‐Me₃TrMA. These differences would be attributed to the different sizes and “propeller” steric structures of the bulky side groups. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 430–436, 2001     

Solvent effect on radical polymerization of butyl acrylate

The propagation and termination rate constants k_p and k_t for the radical polymerization of butyl acrylate initiated by biacetyl have been measured by using the rotating-sector method, in various solvents at 30°C. The value of k_p and initiation rate R_i varied with solvents, while the value of k_t did not change with solvents except for benzonitrile. The variation of k_p with aromatic solvents has a trend against Hammett σ_p of the solvent substituents similar to that for methyl methacrylate or phenyl methacrylate except for the value in benzonitrile, when it is larger than the variation for methyl methacrylate or phenyl methacrylate. The larger variation of k_p for butyl acrylate is compatible with the view that the origin of the solvent effect lies in complex formation between the propagating radical and aromatic solvent molecules. The exceptional decrease in k_p and k_t in benzonitrile is explained by a contraction of the poly(butyl acrylate) chain in the poor solvent.     

Influence of the stereochemical configuration on the radical polymerization of methacrylic monomers: cis‐ and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate

The synthesis of two new isomeric monomers, cis‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (CCDM) and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (TCDM), starting from the reaction of glycerol and cyclohexanecarbaldehyde, is reported. The process involved the preparation of different alcohol acetals and esterification with methacryloyl chloride of the corresponding cis and trans 5‐hydroxy compounds of 2‐cyclohexyl‐1,3‐dioxane. The radical polymerization reactions of both monomers, under the same conditions of temperature, solvent, monomer, and initiator concentrations, were studied to investigate the influence of the monomer configuration on the values of the propagation and termination rate constants (k_p and k_t ).The values of the ratio k_p /k_t ^1/2 were determined by UV spectroscopy by the measurement of the changes of absorbance with time at several wavelengths in the range 275–285 nm, where an appropriate change in absorbance was observed. Reliable values of the kinetics constants were determined by UV spectroscopy, showing a very good reproducibility of the kinetic experiments. The values of k_p /k_t ^1/2, in the temperature interval 45–65 °C, lay in the range 0.40–0.50 L^1/2/mol^1/2s^1/2 and 0.20–0.30 L^1/2/mol^1/2s^1/2 for CCDM and TCDM, respectively. Measurements of both the radical concentrations and the absolute rate constants k_p and k_t were also carried out with electron paramagnetic resonance techniques. The values of k_p at 60 °C were nearly identical for both the trans and cis monomers, but the termination rate constant of the trans monomer was about three times that of the cis monomer at the same temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3883–3891, 2000     

Determination of propagation and termination rate constants for some methacrylates in their radical polymerizations

Rotating sector determinations of k_p and 2k_t for ten methacrylates undergoing radical polymerization were carried out at 30°C. Ester groups in the monomers were: isopropyl, ethyl, β-cyclohexylethyl, methyl, γ-phenylpropyl, β-phenylethyl, β-methoxyethyl, benzyl, β-chloroethyl, and phenyl. Values of k_p obtained were 121, 126, 1190, 141, 149, 228, 249, 1250, 254, and 411 l./mole-sec., respectively; values of 2k_t × 10^?6 were 4.52, 7.35, 32.8, 11.6, 0.813, 1.88, 9.30, 41.9, 6.71, and 11.9 l./mole-sec., respectively. Omitting the data for the β-cyclohexylethyl and benzyl esters, a Taft correlation, log k_p = (0.70 ± 0.18)σ* + 2.2, was established, where σ* denotes Taft's polar substitutent constants for the above-mentioned ester groups. The steric substituent constants E_s were found to have no influence on k_p. Combination of k_p with r₂ data from copolymerization studies with styrene or methyl methacrylate as M₁ comonomer revealed that the more reactive monomer gave rise to the more reactive polymer radical. Monomer viscosities and molar volumes of the ester groups were found to correlate with 2k_t.     

Determination of absolute rate constants for free radical polymerization of ethyl α-fluoroacrylate and characterization of the polymer

The absolute rate constants for propagation (k_p) and for termination (k_t) of ethyl α-fluoroacrylate (EFA) were determined by means of the rotating sector method; k_p = 1120 and k_t = 4.8 × 10⁸ L/mol.s at 30°C. The monomer reactivity ratios for the copolymerizations with various monomers were obtained. By combining the k_p values for EFA from the present study and those for common monomers with the monomer reactivity ratios, the absolute values of the rate constants for cross-propagations were also evaluated. Reactivities of EFA and poly(EFA) radical, being compared with those of methyl acrylate and its polymer radical, were found to be little affected by the α-fluoro substitution. Poly(EFA) prepared with the radical initiator was characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Although the glass transition temperature obtained by DSC for poly(EFA) resembled that of poly(ethyl α-chloroacrylate), its TGA thermogram showed fast chain de polymerization to EFA that was distinct from complicated degradation of poly(ethyl α-chloroacrylate).     

A pronounced ortho effect in the polymerization of o-substituted β-nitrostyrenes

It was shown in a previous paper that a number of m - and p-substituted β-nitrostyrenes would readily undergo polymerization via anionic initiation with alkoxide ions to yield high polymers, whereas, in all cases, the corresponding o-substituted isomers could not be induced to produce polymers under any conditions tried. This article reports a systematic study of this unexpected “ortho effect” based on the initial postulate that the effect was the result of steric inhibition of the propagation step that would ordinarily lead to polymer. Since the fluorine atom is only slightly larger than the hydrogen atom, the series o-, m-, and p-fluoro-β-nitrostyrenes was synthesized and its alkoxide ion-initiated polymerization studied. Although it was shown in all cases of o-substituted β-nitrostyrenes studied that initiation was rapid, only in the case of o-fluoro-β-nitrostyrene was a substantial amount of polymer obtained. With up to 3 mole % initiator a maximum of 26% polymer was obtained, whereas polymerization was rapid in cases of the meta and para isomers. The values of the propagation rate constants k_p were found to be 1.1 liters/mole-sec for the para isomer as compared with 4.8 × 10^?2 liter/mole-sec for the ortho isomer for a ratio k_p(p)/k_p(o) = 23, the magnitude of this ortho effect for the fluorine atom.     

Radical polymerization of methyl methacrylate in the presence of isotactic poly(methyl metacrylate). VII. Determination of the rate constants for template polymerization

The separate rate constants k_p and k_t for propagation and termination of radical template polymerization of methyl methacrylate along isotactic poly(methyl methacrylate) as a polymer template have been determined. The polymerizations were carried out in the strongly complexing solvent dimethylformamide at 5°C. For the evaluation of k/k_t from stationary kinetic experiments, the rates of initiation were determined by employing a scavenger method. The nonstationary experiments yielding k_p/k_t were performed by means of the rotating sector technique. As the template rate effects increased with decreasing initiator concentration, the rotating sector curves were corrected for variation in light intensity. It appeared that the radical lifetime increases from 8.4 sec for normal or blank polymerization to 64 sec for template polymerization. The calculated values of k_p are 26.6 and 5.9 l./mole-sec and of k_t 140 × 10⁴ and 1.7 × 10⁴ l./mole-sec for blank and template polymerization, respectively. The changes in k_p and k_t, due to the presence of template polymer, are explained in terms of an extra loss of activation entropy in the stereoselective propagation step and a strong hindrance of segmental diffusion for the termination reaction of the chains growing along the polymer template.     

Kinetic model of living radical polymerization

This work studies the kinetics of living radical polymerization by means of both the nonsteady state approach and the quasi-stationary state method. Expressions for the numberand weight-average degress of polymerization and the polydispersity index were derived. Numerical results show that the concentration of residual initiator seriously influences the polydispersity index of the resulting polymer. The calculated outcomes of the non-steady state approach are evidently different from those of the quasi-stationary state method when the magnitude of the rate constant of termination is comparable with that of the propagation rate constant, and the difference becomes negligible if the rate constant of the termination (k_t) is much larger than that of propagation (k_p). The polydispersity index of the resulting polymer increases with decreasing ratios of k_t to k_p or M_O to I_O (initial concentrations of monomer and initiator).     

Kinetics of emulsion polymerization of methyl methacrylate

The kinetics of the emulsion polymerization of methyl methacrylate at 50°C have been studied in seeded systems using both chemical initiation and γ-radiolysis initiation. Both steady-state rates and (for γ-radiolysis) the relaxation from the steady state were observed. The average number of free radicals per particle was quite high (e.g., ～0.7 for 10^?3 mol dm^?3 S₂O²₈ initiator). The data are quantitatively interpreted using a generalized Smith–Ewart–Harkins model, allowing for free radical entry, exit, biomolecular termination within the latex particles, and aqueous phase hetero-termination and re-entry. From this treatment, there results (i) the dependence of the termination rate coefficient (k_t) on the weight fraction of polymer (w_p), (ii) lower bounds for the dependence of the entry rate coefficient on initiator concentration, and (iii) the conclusion that most exited free radicals undergo subsequent re-entry into particles rather than hetero-termination. The results for k_t(w_p) are consistent with diffusion control at temperatures below the glass transition point. Comparisons are presented of the behavior of methyl methacrylate, butyl methacrylate, and styrene in emulsion polymerization systems.     

Analysis of polymerization rates in radical polymerization with primary radical termination of some methacrylates

Polymerization rates in polymerizations with primary radical termination of ethyl methacrylate, β-phenylethyl methacrylate, β-methoxyethyl methacrylate, and phenyl methacrylate initiated by 2,2'-azobis-(2,4-dimethylvaleronitrile) at 60°C were analyzed by using a simple linear equation. The values obtained of k_ti/k_ik_p (where k_ti is the primary radical termination rate constant, k_i is the rate constant of addition on to monomer of primary radical, and k_p is the propagation rate constant) on these analyses are discussed on the theoretical base.     

Radical polymerization behavior of N,N-disubstituted acrylamide: Absolute rate constants for polymerization and copolymerization of N-acryloylpiperidine

The absolute rate constants of propagation (k_p) and of termination (k_t) of N-acryloylpiperidine (NAPi) were determined by the rotating sector method in bulk; k_p = 273 and k_t = 1.79 × 10⁷ L/mol s at 30°C. It was noted that k_p for NAPi was 100 times smaller than that for N,N-dimethylacrylamide (DMAcAm). The absolute rate constants of cross-propagations for copolymerizations with common monomers were evaluated by combination of the k_p value and the monomer reactivity ratios. Quantitative comparison of the rate constants with those of DMAcAm and poly(DMAcAm) radical shows that NAPi is as reactive as DMAcAm and the smaller k_p value for NAPi is ascribable to much the lower reactivity of the poly(NAPi) radical. The large difference in reactivity of the polymer radicals is discussed in relation to the steric factor of the piperadino and the dimethylamino groups which seems to affect the capability of the carboxamide group to stabilize the polymer radical.     

Studies on the polymerization of methyl methacrylate activated by azobisisobutyramidine

Kinetic studies on methyl methacrylate polymerization were carried out with watersoluble 2,2′-azobisisobutyramidine (ABA). The rate of polymerization was proportional to the square root of the initiator concentration in the solvents chloroform, methanol, and dimethyl sulfoxide (DMSO), which confirms the bimolecular nature of the termination reaction. The monomer exponent was unity in chloroform but in methanol and DMSO the rate of polymerization passed through a maximum when plotted against the monmer concentration. This behavior in methanol has been attributed to be due to the enhanced rate of production of radical with increasing proportion of methanol. The rate of decomposition of the ABA has been observed to be faster in methanol than in chloroform. The situation becomes more complicated with DMSO, which was found to reduce the value of δ = (2k_t)^1/2/k_p in methyl methacrylate polymerization. The rate of polymerization was observed to be highly dependent on the nature of the solvent, the rate increasing with increased electrophilicity of the solvent. The dependence of R_p on the solvent has been explained in the light of the stabilization of the transition state due to increased solvation of the basic amidine group of the initiator with the increased electrophilicity of the solvent.     

Effects of ortho-substituents on reactivities,tacticities, and ceiling temperatures of radical polymerizations of phenyl methacrylates

Radical polymerization and copolymerization of some o-alkylphenyl methacrylates were carried out and the effect of the ortho-substituents on the ability to homopolymerize, on the monomer reactivities, and on the ceiling temperatures of the monomers was studied. The effect of the substituent on tacticities and thermal stabilities of the polymers formed was also discussed. The ability to honiopolymerize and the monomer reactivity were considerably decreased by the introduction of the o-substituent. 2,6-Di-tert-butylphenyl methacrylate formed no methanol-insoluble polymer at 60°C. On the basis of the tacticity determined it was noted that the o-substituted phenyl methacrylates preferred syndiotactic addition in the propagation reaction less than did phenyl methacrylate or methyl methacrylate. The polymers formed from the o-substituted monomers were thermally less stable than poly(phenyl methacrylate), and, consistent with this finding, ceiling temperatures of the o-substituted phenyl methacrylates seemed to be lower than that of phenyl methacrylate. The effects observed were characteristic of the o-substituents conformationally close to the carbon-carbon double bond of the monomer or the carbon carrying the unpaired electron of the polymer radical.     

Retardation of radical polymerization by phenylacetylene and its p-substituted derivatives

Radical polymerizations of styrene and methyl methacrylate in the presence of phenylacetylene and five of its p-substituted derivatives were carried out with the use of 2,2′-azobisisobutyronitrile as the initiator at 60°C. The initial overall rates of the polymerizations of styrene and methyl methacrylate in the presence of phenylacetylene were not proportional to the square root of the initiator concentration under the experimental conditions employed. The relationship between the overall polymerization rate and the concentration of the phenylacetylenes could be expressed by the Kice equation for the rate of a radical polymerization in the presence of a terminator. From this relationship the rate constant (k_s) of the reaction of a growing polymer radical with the phenylacetylenes and the constant C_s = (k_s/k_p), where k_p is the propagation rate constant of vinyl monomers, were determined. The C_s value thus obtained agree well with that derived from the relationship between the number-average degree of polymerization and the molar ratio of the phenylacetylenes to the vinyl monomer. Therefore the mechanism of the reaction may be considered as being one in which the growing radical reacts with the ethynyl group of the phenylacetylenes to yield a comparatively stable radical which terminates mainly by reaction with the growing radical, and so apparently the phenylacetylenes retard the vinyl polymerization. The substituent effects on the reaction were discussed on the basis of the following modified Hammett equation proposed by Yamamoto and Otsu: log [C_s(p-sub. PA)/C_s(PA)] = ρσ + γE_R where PA represents phenylacetylene, σ and E_R are the Hammett polar substituent constant and resonance substituent constant, respectively, and both ρ and γ are reaction constants. The γ value for the polymerization of both styrene and methyl methacrylate was 1.7. The ρ value was 1.0 for the polymerization of styrene and approximately zero for that of methyl methacrylate. These results demonstrate that the reactivity of the phenylacetylenes with the growing chain is influenced by both polar and resonance effects of their p-substituents in the degradative copolymerization of styrene and only by the resonance effect in that of methyl methacrylate.     

Synthesis and kinetics of polymerization of unsaturated monomers with OH groups in their structure. II. 3-hydroxyneopentyl methacrylate

The synthesis of unsaturated monomers containing one or more hydroxyl groups by reaction between polyalcohols (number of OH, n≥2) and monoacid chlorides has been theoretically analyzed. The difficulties were shown involved in the preparation of these monomers with a high degree of purity even in the most favorable case of the completely substituted compound. The calculated mole fractions of the two monomers that can be obtained by reaction between neopentylglycol and methacryloyl chloride were compared with the experimental ones. Kinetic experiments of the polymerization of 3-hydroxyneopentyl methacrylate and 2-hydroxyethyl methacrylate were carried out at different temperatures in 1,4-dioxane for the former monomer and dioxane and absolute ethanol for the latter. Dilatometric techniques and nonlinear least-squares methods were used to obtain kinetic data and to determine the kinetic constants, respectively. In homogeneous solution the values of k_p/k^1/2_t for the 3-hydroxyneopentyl methacrylate and 2-hydroxyethyl methacrylate was determined by ¹³C-NMR spectroscopy and the molar fractions of tactic triads and dyads were calculated from different resonance signals. The polymers are predominantly syndiotactic and follow a Bernoullian distribution of tactic sequences. Finally, the glass transition temperatures of both polymers, determined calorimetrically, were 145 and 89°C, respectively. © 1995 John Wiley & Sons, Inc.     

Radical and cationic polymerizations of 3‐ethyl‐3‐methacryloyloxymethyloxetane

3‐Ethyl‐3‐methacryloyloxymethyloxetane (EMO) was easily polymerized by dimethyl 2,2′‐azobisisobutyrate (MAIB) as the radical initiator through the opening of the vinyl group. The initial polymerization rate (R_p) at 50 °C in benzene was given by R_p = k[MAIB]^0.55 [EMO]^1.2. The overall activation energy of the polymerization was estimated to be 87 kJ/mol. The number‐average molecular weight (M?_n) of the resulting poly(EMO)s was in the range of 1–3.3 × 10⁵. The polymerization system was found to involve electron spin resonance (ESR) observable propagating poly(EMO) radicals under practical polymerization conditions. ESR‐determined rate constants of propagation (k_p) and termination (k_t) at 60 °C are 120 and 2.41 × 10⁵ L/mol s, respectively—much lower than those of the usual methacrylate esters such as methyl methacrylate and glycidyl methacrylate. The radical copolymerization of EMO (M₁) with styrene (M₂) at 60 °C gave the following copolymerization parameters: r₁ = 0.53, r₂ = 0.43, Q₁ = 0.87, and e₁ = +0.42. EMO was also observed to be polymerized by BF₃OEt₂ as the cationic initiator through the opening of the oxetane ring. The M?_n of the resulting polymer was in the range of 650–3100. The cationic polymerization of radically formed poly(EMO) provided a crosslinked polymer showing distinguishably different thermal behaviors from those of the radical and cationic poly(EMO)s. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1269–1279, 2001     

A simplified data treatment for dead-end and high conversion polymerization kinetics

A simplified approximation method for the treatment of dead-end and high conversion polymerization kinetics is presented. The method is based on the treatment of dead-end polymerization first described by Tobolsky. In appropriate circumstances, by contrast with Tobolsky's method, this method provides measurements of k_d and k_p/k_t^1/2 without recourse to the measurement of the monomer conversion at infinite time. Kinetic studies of free radical polymerizations are normally confined to measurements of initial rates. At low conversions the predictions of the general mechanism for chain-growth polymerization involving initiation, propagation, and termination steps are generally obeyed. Thus the polymerization rate should be first order in the vinyl monomer and half-order in the initiator concentrations. At high conversions, however, large deviations which can be ascribed to various effects can occur; for example, (1) the effect of the increasing viscosity of the polymerization medium on the termination rate constant k_t, and possibly also on the propagation rate constant k_p, which have been considered by North¹ and Cardenas and O'Driscoll,² or (2) depletion of the initiator as the polymerization progresses. This depletion will occur in all polymerizations but its significance will depend on the magnitude of the rate constant for initiator decomposition (k_d) and the period of polymerization. Appropriate conditions will lead to limiting monomer conversion even after infinite polymerization time; this phenomenon has been called dead-end polymerization by Tobolsky.³ Free radical polymerizations to high conversion are particularly important in the industrial context when initial kinetics are obviously inadequate. Suitable treatment of the conversion/time relationship is highly desirable. Senogles and Woolf⁴ have examined the polymerization of n-lauryl methacrylate at 60°C with 2-azobisisobutyronitrile as initiator under dead-end conditions. Here we propose a modification of Tobolsky's treatment of such polymerizations by using an approximation for the exponential decay in the initiator concentration. This method permits easy manipulation of the experimental data and the estimation of values for the kinetic parameters in favorable circumstances without recourse to the measurement of the conversion at infinite time or the evaluation of complicated functions of the monomer conversion. The method thus allows the duration of the laboratory experimentation to be significantly shortened and the complexity of the subsequent data analysis to be considerably reduced.     

Absolute propagation rate coefficients in radical polymerization from gel permeation chromatography of polymers produced by intermittent initiation

The pulsed laser polymerization technique is now a well accepted method to determine propagation rate coefficients for radical polymerization from molar mass distributions resulting from intermittent initiation. A simplified apparatus for the periodic photoinitiation is used which is much less expensive than the laser equipment. The usefulness of the simplified equipment was proved by the determination of k_p for styrene at technically relevant temperatures up to 130°C for the first time. Furthermore, careful inspection of the molar mass distribution (mmd) reveals that depending on the reaction conditions, inflection points (L_i) can not only be found at integer multiples of k_p • t_o • [M] but also at 0.5ⁱ • k_p • t_o • [M], i = 1, 2, 3, … . A rule to find the inflection points leading to correct values for k_p is proposed. It is shown that the shape of the mmd inter alia depends on the amount of primary radical termination compared to the termination reaction between growing chains. With dominant primary termination, the maxima of the distribution will give the correct k_p, whereas in the absence of primary termination the inflection points should be used. Experimental conditions like initiator concentration, light intensity etc. may influence the position of the L_i at least to some extent, and so may give a small but principal error or uncertainty in k_p. A new mathematical method for the time-dependent simulation of the resulting mmd is presented which allows the calculations being performed on a PC within an acceptable time.     

Kinetic study of high-conversion copolymerization of butyl acrylate with methyl methacrylate in solution

Butyl acrylate (BA) and methyl methacrylate (MMA) have been copolymerized in a 3 mol/L benzene solution using 2,2′-azobis(isobutyronitrile) (AIBN) as initiator over a wide composition and conversion range. The overall copolymerization parameter k_p/k_t^1/2 and the composition of the copolymer formed have been measured as a function of conversion. Theoretical values of the coupled parameter k_p/k_t^1/2 calculated from the implicit penultimate unit model and those of cumulative copolymer composition, determined from the Mayo—Lewis terminal model, have been correlated with those experimentally obtained. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1961–1965, 1997