Synthesis and characterization of 1,3,4-oxadiazole-containing polyazomethines

Novel 1,3,4-oxadiazole-containing polyazomethines were synthesized by the polycondensation of diamines, 2,5-bis (m-aminophenyl)-1,3,4-oxadiazole (BMAO) and 2,5-bis (p-aminophenyl)-1,3,4-oxadiazole (BPAO), with aromatic dialdehydes, isophthalaldehyde and terephthalaldehyde, in m-cresol at 20°C. These polymers were yellow to orange in color and had reduced viscosities up to 1.13 dL/g and electric conductivity as high as 10^?11?10^?12 S cm^?1. All the polyazomethines were insoluble in common organic solvents but dissolved in concentrated sulfuric acid. Thermogravimetry showed that thermal degradation started at around 400°C in air and nitrogen atmospheres. Doping with iodine markedly increased the conductivity and produced the black-colored semiconductive polyazomethines with a maximum conductivity of the order of 10^?6 S cm^?1. Electronic spectra of the undoped polymers indicated a large bathochromic shift of the absorption maxima due to C?N bonds of the monomer diamines (285 nm for BMAO and 315 nm for BPAO). This suggests that π-electrons of the polymers are extensively delocalized along the main chain.     

Synthesis and characterization of novel 1,3,4-oxadiazole- or 1,3,4-thiadiazole-containing wholly conjugated polyazomethines

A series of thermally stable and semiconducting polyazomethines containing 1,3,4-oxadiazole or 1,3,4-thiadiazole ring in the polymer backbone were synthesized by the simple solution poly-condensation of dialdehydes with the preformed nuclei with aromatic diamines under mild conditions. To elucidate the structure and also structure-property relationships of the polymers, model compounds were prepared under the same reaction conditions. These polyazomethines having a wholly conjugated system were yellow powders and had reduced viscosities up to 0.38 dL/g in concentrated sulfuric acid and electric conductivity as high as 10^?11 S cm^?1 at room temperature. Thermogravimetry showed that all the polymers were heat resistant up to around 400°C, in both air and nitrogen atmospheres. Their completely black colored charge-transfer complexes were prepared by iodine-doping of the polymers. The room temperature conductivity of the polymers was found to be markedly increased up to the orders of 10^?6–10^?7 S cm^?1 upon doping. The highest value attained was 4.8 x 10^?6 S cm^?1. Comparison of electronic spectra of the polymers with those of the model compounds indicated the π-electrons in the polymers are extensively delocalized along the polymer main chain.     

Synthesis and characterization of soluble aromatic polyazomethines from 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene and aromatic dialdehydes

New soluble aromatic polyazomethines with inherent viscosities of 0.4–0.8 dL/g were prepared by the solution polycondensation of 2,5-bis(4-aminophenyl)-3,4-diphenylthiophene, bis(4-aminophenyl) ether, and aromatic dialdehydes in o-chlorophenol at 20°C. The copolyazomethines are generally soluble in chlorinated hydrocarbons, amide-type or phenolic solvents. The thermal stability of the polymers, which showed no weight loss up to 400°C in both air and nitrogen atmospheres.     

Novel polyimides obtained from a new aromatic diamine (BAPO) containing pyridine and 1,3,4‐oxadiazole moieties for removal of Co(II) and Ni(II) ions

Novel, thermally stable polyimides (PIs) containing a 1,3,4‐oxadiazole and pyridine moieties based on a new aromatic diamine 2,5‐bis‐(aminopyridine‐2‐yl)‐1,3,4‐oxadiazole, BAPO, were synthesized. The prepared polymers were soluble in dimethysulfoxide (DMSO) and concentrated sulfuric acid at room temperature as well as in polar and aprotic solvents, such as, N‐methylpyrrolidone (NMP) and N,N‐dimethylacetamide (DMAc) at elevated temperature. Thermal behaviors of the PIs were studied by thermogravimetric analysis/dynamic thermal analysis (TGA‐DTA) and differential scanning calorimetry (DSC). The inherent viscosities of the PI solutions were in the range of 0.38–0.61 dl/g (in DMSO with a concentration of 0.125 g/dl at 25 ± 0.5°C). The removal of Co(II) and Ni(II) ions from aqueous solutions was performed using polymer 6, which was obtained from BAPO and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA). The maximum adsorption capacity was observed for Co(II) ion at pH = 7.0 (110.4 mg g^?1, 1.87 mmol g^?1). Copyright © 2015 John Wiley & Sons, Ltd.     

Design of alkaline metal ion conducting polymer electrolytes

Polysiloxanes with covalently attached oligo ethylene oxide and di-t-butylphenol ( I ), naphthol ( II ), and hexafluoropropanol ( III ) were synthesized. The crosslinked polymers with a hexamethylene spacer were also prepared. The ion conductivities of the Li, Na, and K salts were measured as a function of temperature. The highest conductivities for K and Na of I at 30°C were 5.5 × 10^?5 and 5.0 × 10^?5 S/cm, respectively, when the ratio of the ion to ethylene oxide unit was 0.014. On the other hand, Li conductivity was 8.0 × 10^?6 S/cm when the ratio between Li and ethylene oxide unit was 0.019. The maximum conductivities of Li ions of II and III were in the order of 10^?6 and 10^?7 S/cm at 30°C, respectively. When the polymers were crosslinked by a hexamethylene residue, the ion conductivities decreased while the degree of crosslinking increased. The temperature dependence of the cation conductivities of these systems could be described by the Williams-Landel-Ferry (WLF) and the Vogel-Tammann-Fulcher (VTF) equation. The results demonstrate that ion movement in these polymers is correlated with the polymer segmental motion. The order of ionic conductivity was K⁺ > Na⁺ ? Li⁺. This suggests that steric hindrance and π-electron delocalization of the anions attached to polymer backbone have a large effect on ion-pair separation and their ionic conductivities. Thermogravimetric analysis of the polymers indicated that the degradation temperature for I and II were about 100°C higher than for poly(siloxane-g-ethylene oxide). This is due to the antioxidant properties of sterically hindered phenols and naphthols. © 1993 John Wiley & Sons, Inc.     

Synthesis of poly(o‐phenylenediamine) nanofiber with novel structure and properties

The poly(o‐phenylenediamine) (PoPD) was synthesized from the monomer o‐phenylenediamine in various organic solvent medium viz. dimethyl sulfoxide (DMSO), N,N‐dimethyl formamide (DMF) and methanol using ammonium per sulfate as a radical initiator. The structure just like polyaniline derivative with free ?NH functional groups of the synthesized polymers confirmed by various standard characterizations was explained from the proposed polymerization mechanism. All the synthesized polymers were completely soluble in common organic solvent like DMSO and DMF because of the presence of polar free ?NH functional groups in its structure. The formation of polymer nanofiber by reverse salting‐out process was confirmed, and the synthesized polymer in DMSO medium was the best polymer in terms of nano‐morphology as well as conducting properties. Interestingly, the average DC conductivity of undoped polymer film was recorded as 2.21 × 10^?6 Scm^?1 because of induced doping through self charge separation. Moreover, the conductivity of the polymer film was further increased to 1.16 × 10^?3 Scm^?1 after doping by sulfuric acid. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(1-benzoylsemicarbazide) and poly(1,3,4-oxadiazole amine) from 2-(p-aminophenyl)-1,3,4-oxadizolin-5-one via ring-opening

A novel thermally stable and semiconducting polyheterocycle, poly(1,3,4-oxadiazole amine), was synthesized from 2-(p-aminophenyl)-1,3,4-oxadiazolin-5-one via ring-opening. The polymer is a new class of ordered alternating copoly(aniline) containing 1,3,4-oxadiazole heterocyclic units. The polymer is highly thermally stable and exhibits no weight loss up to 370°C in air. Its electric conductivity is less than 10⁻¹⁰ S · cm⁻¹ at ambient temperature, but markedly increases to 6,5 · 10⁻⁷ S · cm⁻¹ upon doping with iodine.     

Polymers containing anthraquinone units: Polymers from 1,5-diaminoanthraquinone and aralkyldiketones

Schiff's-base polymers have been formed by the condensation of 1,5-diaminoanthraquinone with 1,4- and 1,3-diacetylbenzene and 2,6-diacetylpyridine. These polymers were soluble in methanesulfonic and concentrated sulfuric acids (1,4-diacetylbenzene polymer) or N,N-dimethylacetamide. The polymer formed from 1,4-diacetylbenzene was ring-closed in polyphosphoric acid to yield a thermally stable polymer soluble in concentrated sulfuric acid which lost only 10% of its weight at 900°C in a TGA test.     

Polybenzimidazoles tethered with N‐phenyl 1,2,4‐triazole units as polymer electrolytes for fuel cells

Polybenzimidazole (PBI) polymers tethered with N‐phenyl 1,2,4‐triazole (NPT) groups were prepared from a newly synthesized aromatic diacid, 3′‐(4‐phenyl‐4H‐1,2,4‐triazole‐3,5‐diyl) dibenzoic acid (PTDBA). The obtained polymers show superior thermal and chemical stability and good solubility in many aprotic solvents. The inherent viscosities of all polymers were around 1 dL/g. They exhibit high thermal stability with initial decomposition temperature ranging from 515 to 530 °C, high glass transition temperature ranging from 375 to 410 °C, and good mechanical properties with tensile stress in the range of 66–98 MPa and modulus 1897–2600 MPa. XRD analysis indicates that these polymers are amorphous in nature. Physicochemical properties such as water and phosphoric acid‐uptake, oxidative stability, and proton conductivity of membranes of these polymers have also been determined. The proton conductivity ranged from 4.7 × 10^?3 to 1.8 × 10^?2 S cm^?1 at 175 °C in dry conditions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2289–2303, 2009     

Synthesis and characterization of some novel organometallic aromatic polyamides

Some novel ferrocene containing aromatic polyamides were prepared by low‐temperature solution phase polycondensation of 1,1′‐ferrocenedicarboxylic acid chloride with some newly synthesized aromatic diamines in tetrahydrofuran, in the presence of triethylamine. The amorphous polymers were derived in good yields, and did not melt at >350 °C. The monomers and the resulting polymers were characterized by their physical properties, elemental analysis, ¹H‐NMR, FTIR spectroscopy, differential scanning calorimetry and thermogravimetric analyses. The polymeric products were insoluble in common solvents tested. However, all were miscible in concentrated H₂SO₄, forming reddish brown solutions at ambient conditions. The glass transition temperatures (T_g) of these polymers were quite high, which is characteristic of aramids. They are stable up to 500 °C, with 10% mass loss observed in the range 400–650 °C. The activation energies of pyrolysis for each of the products were calculated by Horowitz and Metzger's method. Solution viscosities of the polymers were reduced in concentrated sulfuric acid, which is due to their non‐Newtonian behavior. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and electronic properties of poly (E,E)-[6.2]-(2,5) thiophenophane-1,5-diene)

Cationic cyclopolymerization of (E, E)-[6.2]-(2,5) thiophenophane-1,5-diene ( 2 ) gave polymer 3 which has bridged thiophene rings pendant to the polymer backbone. The structural, thermal, and electronic properties of polymer 3 were compared to those of its benzene analogue ( 1 ) and its nonbridged analogue poly (2-vinylthiophene) ( 5 ). The onsets of thermal degradation for polymers 3 and 5 under helium were 425 and 382°C, respectively. Polymer 3 exhibited conductivity in the 10^?3?10^?4 S/cm range when exposed to iodine vapor, four orders of magnitude higher than for 5 treated in the same manner. Apparent energies of activation for conductivity in iodine saturated polymers 3 (0.57 eV) and 5 (0.61 eV) were calculated from conductivity temperature dependence measurements. Conductivity parameters for iodine saturated 3 show both a higher level of conductivity and weaker temperature dependence than for the corresponding cyclopolymer 1 which has benzene rather than thiophene moieties, suggesting that greater charge generation occurs in 3 , due to the lower oxidation potential of the thiophenophane repeat units. Differences in conductivity behavior for iodine saturated polymers 1, 3 , and 5 are discussed in terms of both charge generation and mobility. © 1994 John Wiley & Sons, Inc.     

Synthesis and characterization of novel polybenzimidazoles bearing pendant phenoxyamine groups

A novel aromatic diacid, 3, 5‐dicarboxyl‐4′‐amino diphenyl ether, containing pendant phenoxy amine group was synthesized. Homo‐ and co‐polybenzimidazoles containing different content of pendant phenoxyamine groups were synthesized by condensation of 3,3′‐diaminobenzidine with this acid and a mixture of this acid and isophthalic acid in different ratio in polyphosphoric acid. Copolybenzimidazoles with structural variations were also synthesized based on this acid and pyridine dicarboxylic acid, terephthalic acid, adipic acid, or sebacic acid. The polymers have good solubility in polar aprotic solvents and strong acids and they form tough flexible films by solution casting. The polymers were characterized by different instrumental techniques (FTIR, TGA, DSC, XRD, etc.) and for solvent solubility, mechanical properties, inherent viscosity, and proton conductivity. The inherent viscosities of the polymers vary in the range of 0.62–1.52 dL/g. They have high thermal stability up to 475–506 °C (IDT) in nitrogen, high glass transition temperatures (T_g) ranging from 313 to 435 °C and good tensile strength ranging from 58 to 125 MPa. Proton conductivity of homo polymer is 3.72 × 10^?3 S/cm at 25 °C and 2.45 × 10^?2 S/cm at 200 °C © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5776–5793, 2008     

Synthesis and properties of amphoteric copolymer of 5‐vinyltetrazole and vinylbenzyl phosphonic acid

Amphoteric polymers have been studied for various applications such as separation of low molecular weight organic molecules from inorganic salt mixtures, selective ion transport, drug delivery through membranes of biological interest, separation of ionic drugs and proteins, and separation of alcohol and water. Typical amphoteric polymers consist of weak base and weak acid groups. In present study, the copolymerization of 5‐vinyltetrazole (VT) and diisopropyl‐p‐vinylbenzyl phosphate (DIPVBP) via free radical polymerization is studied. The reactivity ratio of VT and DIPVBP, which is calculated from Kelen‐Tudos plot, is 0.251 and 0.345, respectively. The amphoteric copolymer of VT and diisopropyl‐p‐vinylbenzyl phosphonic acid (poly(VT‐co‐VBPA)) is obtained from hydrolysis of the copolymer of VT and DIPVBP (poly(VT‐co‐DIPVBP)). Poly(VT‐co‐VBPA) is thermally stable under 190 °C. The anhydrous proton conductivity of amphoteric poly(VT‐co‐VBPA) can reach 1.54 × 10^‐4 S cm^?1 at 170 °C with an activation energy of 114.7 kJ mol^?1. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3486–3493     

Preparation and characterization of branched and linear sulfonated poly(ether ketone sulfone) proton exchange membranes for fuel cell applications

Branched sulfonated poly(ether ketone sulfone)s (Br‐SPEKS) were prepared with bisphenol A, bis(4‐fluorophenyl)sulfone, 3,3′‐disodiumsulfonyl‐4,4′‐difluorobenzophenone, and THPE (1,1,1‐tris‐p‐hydroxyphenylethane), respectively, at 180 °C using potassium carbonate in NMP (N‐methylpyrrolidinone). THPE, as a branching agent, was used with 0.4 mol % of bisphenol A to synthesize branched copolymers. Copolymers containing 10–50 mol % disulfonated units were cast from dimethylsulfoxide solutions to form films. Linear sulfonated poly(ether ketone sulfone)s (SPEKS) were also synthesized without THPE. The films were converted from the salt to acid forms with dilute hydrochloric acid. A series of copolymers were studied by Fourier transform infrared, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Sorption experiments were conducted to observe the interaction of sulfonated polymers with water and methanol. The ion‐exchange capacity (IEC), a measure of proton conductivity, was evaluated. The synthesized Br‐SPEKS and SPEKS membranes exhibit conductivities (25 °C) from 1.04 × 10^?3 to 4.32 × 10^?3 S/cm, water swell from 20.18 to 62.35%, IEC from 0.24 to 0.83 mequiv/g, and methanol diffusion coefficients from 3.2 × 10^?7 to 4.7 × 10^?7 cm²/S at 25 °C. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1792–1799, 2008     

Synthesis and characterization of sulfonated poly(phthalazinone ether ketone) for proton exchange membrane materials

As a novel class of proton exchange membrane materials for use in fuel cells, sulfonated poly(phthalazinone ether ketone)s (SPPEKs) were prepared by the modification of poly(phthalazinone ether ketone). Sulfonation reactions were conducted at room temperature with mixtures of 95–98% concentrated sulfuric acid and 27–33% fuming sulfuric acid with different acid ratios, and SPPEK was obtained with a degree of sulfonation (DS) in the desired range of 0.6–1.2. The presence of sulfonic acid groups in SPPEK was confirmed by Fourier transform infrared analysis, and the DS and structures were characterized by NMR. The introduction of sulfonic groups into the polymer chains increased the glass‐transition temperature above the decomposition temperature and also led to an overall decrease in the decomposition temperature. Membrane films were cast from SPPEK solutions in N,N‐dimethylacetamide. Water uptakes and swelling ratios of SPPEK membrane films increased with DS, and SPPEKs with DS > 1.23 were water‐soluble at 80 °C. Proton conductivity increased with DS and temperature up to 95 °C, reaching 10^?2S/cm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 497–507, 2003     

Synthesis and characterization of 1,3,4,-thiadiazole-containing polyethers from 2,5-bis (4-fluorophenyl)-1,3,4-thiadiazole and various aromatic diols

Seven 1,3,4-thiadiazole-containing polyethers with reduced viscosities of 0.27–1.44 dL/g were synthesized by the high-temperature solution polycondensation of novel activated difluoride, 2,5-bis (4-fluorophenyl)-1,3,4-thiadiazole, with aromatic diols possessing a variety of ring structures. The expected chemical structures were confirmed by IR and ¹H-NMR spectroscopy and elemental analysis. Of all the polymers, three polyethers were highly crystalline and soluble only in limited solvents such as concentrated sulfuric acid. The other polyethers were amorphous and dissolved easily in a variety of organic solvents including N-methyl-2-pyrrolidone (NMP), phenols, and chlorinated hydrocarbons. Colorless to slightly yellow-colored, transparent, and tough films could be cast from the NMP solutions of the amorphous polyethers. The mechanical properties of the films were excellent, and their tensile strength, elongation at break, and tensile moduli were in the ranges of 48–72 MPa, 5–7%, and 1.3–1.9 GPa, respectively. The amorphous polyethers had high glass transition temperatures of 204–299°C. All the polyethers were highly thermally and thermooxidatively stable and exhibited no weight loss up to 400°C, with 10% weight loss being recorded at 464–513°C in air. © 1994 John Wiley & Sons, Inc.     

Proton‐conducting polymers based on benzimidazoles and sulfonated benzimidazoles

A sulfonated derivative of polybenzimidazole is reported, and its properties are analyzed in comparison with related polybenzimidazole proton‐conducting materials. Poly(2,5‐benzimidazole), poly(m‐phenylenebenzobisimidazole), and poly[m‐(5‐sulfo)‐phenylenebenzobisimidazole] were prepared by condensation of the corresponding monomers in polyphosphoric acid. Several adducts of these polymers with phosphoric acid were prepared. The resulting materials were characterized by chemical analysis, Fourier transform infrared spectroscopy, and thermogravimetric analysis; also, the dc conductivity of doped and undoped derivatives was measured. Similar to what has been observed for the commercial polybenzimidazole polymer (also examined here for comparison), the title polymers exhibit high thermal stability. Furthermore, their doping with phosphoric acid leads to a significant increase in conductivity from less than 10^?11 Scm^?1 for the undoped polymers to 10^?4 Scm^?1 (both at room temperature) for their acid‐loaded derivatives. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3703–3710, 2002     

Synthesis and characterization of fluorine‐containing polybenzimidazole for proton conducting membranes in fuel cells

Two new kinds of fluorine‐containing polybenzimidazoles (PBI), poly(2,2′‐(tetrafluoro‐p‐phenylene)‐5,5′‐bibenzimidazole) and poly(2,2′‐tetradecafluoroheptylene‐5,5′‐bibenzimidazole), were synthesized by condensation polymerization of 3,3′‐diaminobenzidine and perfluoroterephthalic acid (or perfluoroazelaic acid), with polyphosphoric acid as solvent. Thermogravimetric analysis results show that the fluorine‐containing polymers synthesized exhibit promising thermal stability. The film‐forming properties of the fluorine‐containing polymers are improved over nonfluorinated PBI. The introduction of fluorine into the backbone of the polymers has significant positive affection on their chemical oxidation stability demonstrated by Fenton test. Compared with poly(2,2′‐(m‐phenylene)‐5,5′‐bibenzimidazole)/phosphoric acid (PA) composite membrane, the resulting fluorinated membranes with a same PA doping level exhibit better flexibility and higher proton conductivity. The maximum proton conductivity gained is 3.05 × 10^?2 S/cm at 150 °C with a PA doping level of 7. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2115–2122, 2010     

Polyether azomethines. I. Synthesis and characterization

Six new polyether azomethines were synthesized by melt and solution polycondensation of six different diamines with 4,4′-[1,4-phenylene bis(oxy)] bisbenzaldehyde. The polymers synthesized by solution method are yellow to white in color and had inherent viscosities up to 0.59 dL/g in concentrated H₂SO₄. The polymers obtained by melt condensation show higher viscosity. Except polymer IV , others are insoluble in common organic solvents. The polymers were characterized by IR, x-ray, elemental analysis, and DSC study. The thermal stability of the polymers was evaluated by TGA and IGA study. Polymers I-III are highly thermally and thermooxidatively stable and exhibit no appreciable decomposition up to 420°C both in air and nitrogen atmosphere. It was shown that the curing of the polyazo-methines takes place by opening up of the ? CH?N? linkages at higher temperature. The electrical conductivities of the virgin and iodine doped polymers were as high as 10^?11?10^?16 and 10^?6?10^?8S cm^?1, respectively, at 30°C. Electronic spectra of the undoped polymers ( I-III ) indicated a large bathochromic shift of the ? – ?^* absorptions band (376 nm) due to ? C?N? bonds of the model compound. This can be attributed to extensive delocalization of the electrons along the polymer chain. © 1995 John Wiley & Sons, Inc.     

Synthesis and properties of aromatic polyamides with oligobenzamide pendent groups. I. Poly-5-(4-benzoylamino-1-benzoylamino)isophthalamides

A series of polyisophthalamides having pendent oligomeric benzamide groups were prepared by the Yamazaki reaction from common aromatic diamines and 5-(4-benzoylamino-1-benzoylamino)isophthalic acid. The latter was synthesized from 5-aminoisophthalic acid in a three-step synthesis by successive incorporation of benzamido groups. The new polymers were characterized by NMR, DSC, TGA, and WAXD and the properties were compared to those of corresponding unsubstituted polyisophthalamides. All of the polymers were essentially amorphous and their T_gs were about 20°C higher than the reference polymers. Initial thermal decomposition temperatures ranged from 375 to 420°C. All of the polymers were soluble in aprotic polar solvents without added salts. Properties of particular note were: the water uptake, which was particularly high, ranging from 7.5 to 18.2%, and the temporary insolubilization in concentrated sulfuric acid of films of the polymers heated for a short time to ≥ 200°C. © 1995 John Wiley & Sons, Inc.