Hydrophosphinoyl derivatives of calix[4]resorcinarenes

Calix[4]resorcinarene reacts with N,N,N",N"-tetraethyl-P-ethylphosphonous diamide to give dioxaphosphocines, whose hydrolysis with intracavity water yields phosphinoyl derivative of calix[4]resorcinarene.     

The Synthesis of N‐Glycosyl‐N′‐Pyrazolylmethylene Aminothioureas under a 4Å Molecular Sieve

A series of novel N‐glycosyl‐N′‐pyrazolylmethylene aminothioureas ( 4a‐4e, 5a‐5e ) were synthesized from N‐glycosyl‐N′‐aminothioureas ( 2a‐2d ) and 4‐formylpyrazole ( 3a‐3e ). Activated 4Å molecular sieves were adopted for dehydrated reagent to improve the reaction rate and yield. The structures of the new compounds were identified on the basis of IR, ¹H NMR and MS spectra. Simultaneously, the compounds were detected by fluorescence spectrophotometer and had preferable fluorescence activity, so they can be selected as a kind of novel fluorescence labeled derivative of sugar.     

Synthesis and characterization of new organosoluble polyamides derived from bis[4‐(4‐carboxyphenoxy) phenyl]diphenylmethane

A new dicarboxylic acid containing a diphenylmethylene linkage, bis[4‐(4‐carboxyphenoxy)phenyl]diphenylmethane (BCAPD), was prepared from bis(4‐hydroxphenyl)diphenylmethane and p‐fluorobenzonitrile via an aromatic nucleophilic substitution reaction followed by hydrolysis. A series of novel polyamides were prepared by the direct polycondensation of BCAPD and various aromatic diamines. The polymers were produced with moderate to high inherent viscosities of 0.80–0.85 dL g^?1. Nearly all the polymers were readily soluble in polar solvents such as N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfoxide, in less polar solvents such as pyridine and cyclohexanone, and in tetrahydrofuran. All the polymers were amorphous, and the polyamide films had a tensile strength and a tensile modulus greater than 80 MPa and 2.0 GPa, respectively. These polyamides had glass‐transition temperatures between 249 and 274 °C, and their temperatures at a 10% weight loss were 477–538 and 483–540 °C in nitrogen and air atmospheres, respectively. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1156–1161, 2001     

Synthesis and characterization of new soluble polyamides from 1,1‐bis[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane and various diamines

A new dicarboxylic acid monomer, 1,1‐bis[4‐(4‐carboxyphenoxy)phenyl]‐4‐tert‐butylcyclohexane, bearing a pendent tert‐butylcyclohexylidene group was prepared in three steps from 4‐tert‐butylcyclohexanone. The monomer was reacted with various diamines to produce a series of new polyamides with triphenyl phosphite and pyridine as condensing agents. These polyamides were produced with inherent viscosities of 0.74 to 1.02 dL g⁻¹. All the polymers were characterized by X‐ray diffraction that revealed this amorphous nature. These polymers exhibited excellent solubility in a variety of solvents. Almost all the polymers could be dissolved in N‐methyl‐2‐pyrrolidinone, N,N‐dimethylacetamide (DMAc), N,N‐dimethylformamide, dimethyl sulfoxide, pyridine, and even in tetrahydrofuran and cyclohexanone. These polymers showed glass‐transition temperatures between 223 and 256 °C and decomposition temperatures at 10% weight loss ranging from 468 to 491 °C and 469 to 498 °C in nitrogen and air atmospheres, respectively. Transparent, tough, and flexible films of these polymers were cast from the DMAc solutions. These polymer films had tensile strengths ranging from 76 to 99 MPa, elongations at break from 7 to 19%, and initial moduli from 2.1 to 2.7 GPa. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 797–803, 2000     

Preparation and properties of aromatic polyamides and polyimides derived from 3,3-bis [4-(4-aminophenoxy) phenyl] phthalide

3,3-Bis[4-(4-aminophenoxy)phenyl]phthalide ( II ) was used as a monomer with various aromatic dicarboxylic acids and dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of phenolphthalein with p-chloronitrobenzene in the presence of K₂CO₃. Polyamides IV _a-g having inherent viscosities of 0.77–2.46 dL/g were prepared by the direct polycondensation of diamine II with diacids III _a-g using triphenyl phosphite and pyridine as condensing agents. The polyamides were readily soluble in a variety of solvents such as N, N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), and N-methyl-2-pyrrolidinone (NMP) and afforded transparent and flexible films from the polymer solutions. These polymers had glass transition temperatures (T_gs) in the 227–307°C range and 10% weight loss temperatures occurred up to 450°C. Polyimides VI _a-e based on diamine II and various aromatic dianhydrides V _a-e were synthesized by the two-stage procedure that included ring-opening, followed by thermal or chemical conversion to polyimides. Most of the polyimides obtained by chemical cyclodehydration procedure were found to soluble in DMF, NMP, o-chlorophenol, and m-cresol. The T_gs of these polyimides were in the 260–328°C range and showed almost no weight loss up to 500°C under air and nitrogen atmosphere. © 1994 John Wiley & Sons, Inc.     

Synthesis of N-(2-Benzene-2,2-dichloroethylidene)-4-chlorobenzenesulfonamide and N-(2-Benzene-2,2- dichloroethylidene)-4-methylbenzenesulfonamide

In reaction of N,N-dichloro-4-chlorobenzene- and N,N-dichloro-4-methylbenzenesulfonamides with phenylacetylene were obtained in good yield N-(2-benzene-2,2-dichloroethylidene)arenesulfonamides. The latter undergo nucleophilic addition of water, ethanol, and arenesulfonamides.     

The synthesis of azahomotryptophane derivatives. The transformation of N-trifluoroacetyl-5-bromo-4-oxonorvaline methyl ester into 4-(imidazo[1,2-a]azinyl-3)-4-oxohomoalanine derivatives

Azatryptophane homologues, 4-(imidazo[1,2-a]pyridinyl-3)- 9a-9f and 4-(imidazo[1,2-a]pyrimidinyl-3)-4-oxohomoalanine derivatives 9g-91 , were prepared from N,N-dimethyl-N′-(pyridinyl-2)- 6a-6f and N,N-dimethyl-N-(pyriniidinyl-2)formamidines 6g-6i , and (S)-N-trifluoroacetyl-5-bromo-4-oxonorvaline methyl ester ( 2 ) and its (R,S)-isomer.     

Synthesis of 2-amino-4-imino-4,5-dihydrothiazoles from N-sulfonyl-α-chloroamidines and thiourea

A number of new and interesting 2-amino-4-(N-substituted)imino-4,5-dihydrothiazoles were synthesized by reacting thiourea (or thiourea hydrochloride) with N-alkyl- or N,N-dialkyl-N′-p-toluenesulfonyl-α-chloroacetamidines, where the N,N-alkyl groups were ethyl, cyclohexyl, benzyl, β-phenethyl, (3,5-dimethyl-1-adamantyl)-methyl, as well as N,N-dimethyl- and N,N-pentamethylene. Reactions of N-alkyl-N-p-toluenesulfonyl-2-chloroacetamidines (substituents being N-ethyl, N-benzyl and N,N-dimethyl) with thiourea hydrochloride in hot 2-propanol furnished 2-amino-4-(p-toluenesulfonyl)imino-4,5-dihydrothiazole (in 51, 60 and 65% yields, respectively) and the corresponding amine hydrochloride. In hot acetone or butanone, the reactions of these N-sulfonyl-2-chloroacetamidines with excess thiourea provided 2-amino-4-N-(alkyl or N,N-dialkyl)imminium-4,5-dihydrothiazole chlorides in 25–80% yield. The by-product from these reactions was p-toluenesulfonamide. The structures of the products were established by chemical transformations and spectral methods (nmr and mass spectra).     

Reactions of 3-hydroxytetrahydropyrimidin-4-ones with electrophilic reagents

The reactions of nonsubstituted or 2-aryl-substituted 3-hydroxytetrahydropyrimidin-4-ones (HTHP) with carboxylic acid chlorides, tosyl chloride, or aryl isocyanates afford mainlyN,O-diacylated,N,O-ditosylated, orN,O-diarylcarbamoylated HTHP, respectively.N,O-Diacylated HTHP are also formed in the reactions of acid chlorides with Schiff's bases based on β-aminopropionohydroxamic acid.N-Acylated HTHP can be obtained by treatingN,O-diacylated HTHP with ammonia. The reactions of 2,2-dialkyl(alkylene)-substituted HTHP with acid chlorides or phenyl isocyanate giveN,O-diacylated orN,O-diphenyl-carbamoylated β-aminopropionohydroxamic acid, respectively. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2327–2332, December, 1999.     

1,4,4a,10b-Tetrahydro-N,N-dimethyl-4-phenanthridinamines and 1,4,4a,5,6,10b-hexahydro-N,N-dimethyl-4-phenanthridinamines

Synthetic procedures to prepare the title compounds are described. Diels-Alder cycloaddition of β-nitrostyrene derivatives 5 to N,N-dimethyl-1,3-butadien-1-amine, 6 , gave 5-aryl-N,N-dimethyl-6-nitro-2-cyclohexen-1-amines 7. Reduction of 7 with zinc in acetic acid gave the diamino derivatives 8 . Schotten-Baumann acylation of 8 gave amides 9 . Treatment of 8 with alkyl isocyanates gave the aminourea derivatives 10 . Bischler-Napieralski cyclodehydration procudure of 9 and 10 gave 1,4,4a,10b-tetrahydrophenanthridinamines 3 and N⁶-alkyl-1,4,4a,10b-tetrahydro-N⁴,N⁴-dimethyl-4,6-phenanthridinediamines 11 , respectively. Condensation of diamines 8 with aryl aldehydes under azeotropic conditions gave imines 12 which on treatment with acids yielded 6-aryl-1,4,4a,5,6,10b-hexahydro-N,N-dimethyl-4-phenanthridinamines 4 . The stereochemistry of these materials is assigned from the proton magnetic resonance studies.     

Reaction of ketenes with N,N-disubstituted α-aminomethyleneketones. X. Synthesis of N,N-disubstituted 6-alkyl-4-amino-3,3-dichloro-3,4-dihydro-2H-pyran-2-ones and of 6-alkyl-4-amino-3-chloro-2H-pyran-2-ones

Cycloaddition of dichloroketene to N,N-disubstituted 1-amino-4-methyl-1-penten-3-ones and 1-amino-4,4-dimethyl-1-penten-3-ones occurred in moderate to fair yield only in the case of aromatic N-substitution to give N,N-disubstituted 6-alkyl-4-amino-3,3-dichloro-3,4-dihydro-2H-pyran-2-ones, which were dehydrochlorinated with DBN to afford in good yield N,N-disubstituted 6-alkyl-4-amino-3-chloro-2H-pyran-2-ones. In the case of aliphatic N,N-disubstitution, cyclo-addition led directly to 6-alkyl-4-dialkylamino-3-chloro-2H-pyran-2-ones only for N,N-disubstituted 1-amino-4,4-dimethyl-1-penten-3-ones. The reaction between 1-dimethylamino-4-methyl-1-penten-3-one and dichloroketene gave 3-chloro-4-dimethylamino-3,6-dihydro-6-isopropylidene-2H-pyran-2-one in low yield.     

Syntheses and properties of aromatic polyamides and polyimides based on N-phenyl-3,3-bis[4-(p-aminophenoxy) phenyl] phthalimidine

N-Phenyl-3,3-Bis[4-(p-aminophenoxy)phenyl] phthalimidine ( II ) was used as a monomer with various aromatic dicarboxylic acids and tetracarboxylic dianhydrides to synthesize polyamides and polyimides, respectively. The diamine II was derived by a nucleophilic substitution of N-phenyl-3,3-bis(4-hydroxyphenyl) phthalimidine with p-chloronitrobenzene in the presence of K₂CO₃ and then hydro-reduced. Polyamides IV _a-g having inherent viscosities of 0.55–1.64 dL/g were prepared by the direct polycondensation of the diamine II with various aromatic diacids using triphenyl phosphite and pyridine as condensing agents. All the aromatic polyamides were amorphous and readily soluble in various polar solvents such as N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, dimethylsulfoxide, and N-methyl-2-pyrrolidone (NMP). Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polyamides had glass transition temperatures in the range of 293–319°C and 10% weight loss occurred up to 480°C. The polyimides were synthesized from diamine II and various aromatic dianhydrides via the two-stage procedure that included ring-opening polyaddition in DMAc to give poly(amic acid)s, followed by thermal or chemical conversion to polyimides. Most of the aromatic polyimides obtained by chemical cyclization were found to be soluble in NMP, m-cresol, and o-chlorophenol. These polyimides showed almost no weight loss up to 500°C in air or nitrogen atmosphere. © 1994 John Wiley & Sons, Inc.     

Nitrogen bridgehead compounds. Part 50 . Vilsmeier-haack acylation of 6,7,8,9-tetrahydro-4H-pyrido[1,2-a]pyrimidin-4-ones,Part 5

6-Methyl-6,7,8,9-tetrahydro-4H-pyrido[1,2-a]pyrimidin-4-ones 1-5 were subjected to Vilsmeier-Haack acylation with complexes of phosphoryl chloride and different amides. Acylation at position 9 of the pyridopyrim-idines was successful with the iminium salt formed in situ from N-formylpiperidine, N-methylformanilide or N,N-diethylbenzamide, but unsuccessful with the iminium salt formed from N,N-diethylacetamide or N,N-di-ethylisobutyramide, respectively. The iminium salt formed from formanilide, N-methylpyrrolidinone or formamide reacted only with those tetrahydropyridopyrimidinones which contain a strongly electronegative substituent (e.g. CN or CO₂Et) in position 3. With the latter derivatives, the 9-phenylaminomethylene group could be introduced using N,N-diphenylformamide or in a “one-pot” procedure with aniline and triethyl orthoformate. Ethanolysis of 9-N-methyl-N-phenylaminomethylene derivatives 15 and 19 afforded 9-ethoxy-methylene compounds 26 and 27 in the presence of hydrogen chloride. The structures of the 9-substituted 6-methyltetrahydropyridopyrimidin-4-ones 14-25 were elucidated by means of uv, ¹H and ¹³C nmr spectroscopy. 9-Piperidinomethylene 14 , 9-(N-methyl-N-phenylaminomethylene 15-19 and 9-(N-methyl-2-pyrrolidinylidene) 21 derivatives exist as E geometric isomers. 9-Phenylaminomethylene-6-methyl-4-oxo-6,7,8,9-tetra-hydro-4H-pyrido[1,2-a]pyrimidine-3-carbonitrile 20 displays a solvent-dependent E-Z isomerism. The bis-compound 25 contains both E and Z geometric exo C ? CH double bonds. 9-Benzoyl derivatives 23 and 24 exist predominantly as the 1,6,7,8-tetrahydropyridopyrimidin-4-one tautomer.     

New Synthetic Approach to 4-N-Arylaminoazuleno[2,1-d]pyrimides

1-Cyano-2-N,N-dimethylformamidinylazulenes as new synthons directed to heterocycle-fused azulenes were obtained by the condensation of 2-amino-1-cyanoazulenes and N,N-dimethylformamide dimethyl acetal (DMFDMA). 1-Cyano-2-N,N-dimethylformamidinylazulene (2a) and 1-bromo-3-cyano-2-N,N-dimethylformamidinylazulene (2b) reacted with anilines (3a–h) to give 4-N-arylaminoazuleno-[2,1-d]pyrimidines in moderate yields. This reaction provides a new procedure for synthesis of pyrimidine-fused azulenes.     

An unexpected preparation of 4-oxo-2H-1,3-benzothiazines

Treatment of compound N,N-(dithiobis(3-chloro-2,1-phenylene)dicarbonylbis (N-cyclopentylglycine)diethyl ester (3) with methanolic sodium hydroxide does not produce the expected hydrolysis product N,N-(dithiobis-(3-chloro-2,1-phenylene)dicarbonylbis (N-cylcopentylglycine) (4) but yields a mixture of compounds 8-chloro-3-cyclopentyl-3,4-dihydro-4-oxo-2H-1,3-benzothiazine-2-carboxylic acid (6) and N-(3-chloro-2-mercaptobenzoyl)-N-cyclopentylglycine (7). This unexpected observation has the potential of a new heterocyclic synthesis method for the 4-oxo-2H-1,3-benzothiazine class of compounds.     

The conformation and dynamic behaviour of tetrathiacalix[4]arenes functionalized by hydrazide and hydrazone groups

The ¹H, ¹³C and ¹⁵N NMR data, conformation and dynamic behaviour of the new tetrathiacalix[4]arenes functionalized by hydrazide and hydrazone groups are reported and compared with the result of earlier investigations of 4-tert-butylphenoxyacetylhydrazones. The unusual fact of formation of N,N′-diacetylhydrazine bridge and factors leading to its formation in the cone conformer of calixarene has been discussed. The barriers of rotation of hydrazone fragments of tetrathiacalix[4]arenes were determined by NMR-measurements at various temperatures. The structure of 1,3-alternate conformer of 5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrakis[hydrazinocarbonylmethyl]-2,8,14,20-tetrathiacalix[4]arene in solution is compared with crystal structure obtained by the X-ray analysis.     

One-Step Preparation of Fe/N/C Single-Atom Catalysts Containing Fe−N4 Sites from an Iron Complex Precursor with 5,6,7,8-Tetraphenyl-1,12-Diazatriphenylene Ligands

Fe/N/C single-atom catalysts containing Fe−N_x sites prepared by pyrolysis are promising cathode materials for fuel cells and metal-air batteries due to their high oxygen reduction reaction (ORR) activities. We have developed iron complexes containing N2- or N3-chelating coordination structures with preorganized aromatic rings in a 1,12-diazatriphenylene framework tethering bromo substituents as precursors to precisely construct Fe−N₄ sites in an Fe/N/C catalyst. One-step pyrolysis of the iron complex with carbon black forms atomically dispersed Fe−N₄ sites without iron aggregates. X-ray absorption spectroscopy (XAS) and electrochemical measurements revealed that the iron complex with N3-coordination is more effectively converted to Fe−N₄ sites catalyzing ORR with a TOF value of 0.21 e site⁻¹ s⁻¹ at 0.8 V vs. RHE. This indicates that the formation of Fe−N₄ sites is controlled by precise tuning of the chemical structure of the iron complex precursor.     

Synthesis of 4-Aryl-1,5-benzodiazepine-2-carboxamides

4,N-Diaryl-1,5-benzodiazepine-2-carboxamides were synthesized by acid-catalyzed reaction of (Z)-4,N-diaryl-2-hydroxy-4-oxo-2-butenamides with o-phenylenediamine or N,N'-bis(triphenylphosphoranediyl)-o-phenylenediamine. The reaction mechanism is discussed.     

Electron spin and electron nuclear double resonances of the stable 1-(4-nitrophenyl)-3-phenyl-1,4-dihydro-1,2,4-benzotriazin-4-yl free radical

The ¹H and ¹⁴N hyperfine structure constants for the stable 1-(4-nitrophenyl)-3-phenyl-1,4-dihydro-1,2,4-benzotriazin-4-yl free radical obtained by the oxidation of 1-(4-nitrophenyl)-3-phenyl-1,4-dihydro-1,2,4-benzotriazine or N-phenylbenzamide 4-nitrophenylhydrazone were determined by the ESR and ¹H electron nuclear double resonance methods.     

New organosoluble polyimides with low dielectric constants derived from bis[4-(2-trifluoromethyl-4-aminophenoxy)phenyl] diphenylmethylene

A new kink diamine with trifluoromethyl group on either side, bis[4-(2-trifluoromethyl-4-aminophenoxy)phenyl]diphenylmethane (BTFAPDM) , was reacted with various aromatic dianhydrides to prepare polyimides via poly (amic acid) precursors followed by thermal or chemical imidization. Polyimides were prepared using 3,3′, 4,4′-biphenyltetracarboxylic dianhydride(1), 4,4′-oxydiphthalic anhydride(2), 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (3), 4,4′-sulfonyldiphthalic anhydride(4), and 4,4′-hexafluoroisopropylidene-diphathalic anhydride(5). The fluoro-polyimides exhibited low dielectric constants between 2.46 and 2.98, light color, and excellent high solubility. They exhibited glass transition temperatures between 227 and 253°C, and possessed a coefficient of thermal expansion (CTE) of 60-88 ppm/°C. Polymers PI-2, PI-3, PI-4, PI-5 showed excellent solubility in the organic solvents: N-methyl-2-pyrrolidinone (NMP), N,N-dimethylacetamide (DMAc), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), pyridkie and tetrahydrofuran (THF). Inherent viscosity of the polyimides were found to range between 0.58 and 0.72 dLg-1. Thermogravimetric analysis of the polyimides revealed a high thermal stability decomposition temperature in excess of 500°C in nitrogen. Temperature at 10 % weight loss was found to be in the range 506-563°C and 498-557°C in nitrogen and air, respectively. The polyimide films had a tensile strength in the range 75-87 MPa; tensile modulus, 1.5-2.2 GPa; and elongation at break, 6-7%.