Syntheses,Crystal Structures,and Thermal Properties of Energetic Semicarbazide Salt,Manganese(II) Salt,and Coordination Compound of 3,5‐Dinitrobenzoic Acid

Nitro compounds have been actively researched as driven by their potential to be high‐performing energetic materials. Herein, three new nitro compounds including semicarbazide 3,5‐dinitrobenzoate, (SCZ)(DNBA), manganese 3,5‐dinitrobenzoate dihydrate, [Mn(DNBA)₂(H₂O)₂]_n, and bis(semicarbazide) manganese(II) 3,5‐dinitrobenzoate, Mn(SCZ)₂(DNBA)₂, were synthesized and characterized by elemental analysis, IR spectroscopy, and single‐crystal X‐ray diffraction analysis. The results indicated that the above mentioned compounds are ionic, polymeric, and molecular in nature, respectively. Moreover, their thermal decomposition properties were assessed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Their non‐isothermal reaction kinetics parameters, critical temperature of thermal explosion (T_bp), entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) of the exothermic decomposition process were also calculated. Results suggest that there was a relationship between the structure and thermal stability.     

Transesterification Kinetics Investigation of R‐Substituted Phenyl Benzoates with 4‐Methoxyphenol in the Presence of K2CO3 in DMF

Transesterification of R‐substituted phenyl benzoates 1–5 with 4‐methoxyphenol 6 was kinetically investigated in the presence of K₂CO₃ in dimethylformamide (DMF) at various temperatures. The Hammett plots for the reactions of the 1–5 demonstrate good linear correlations with σ⁰ constants. Low magnitude of ρ_LG values indicate that the leaving group departure occurs after the rate‐determining step. The Brønsted coefficient values for the reactions (?0.2, ?0.16, ?0.13 at 15, 24, 36°C, respectively) demonstrate the weak effect of leaving group substituent on the reactivity of R‐substituted phenyl benzoates 1–5 for the reactions with 4‐methoxyphenol 6 in the presence of K₂CO₃ in DMF. The leaving group substituent effect on free energy (ΔG^≠), enthalpy (ΔH^≠), and entropy (ΔS^≠) of activation was examined. It was shown that the activation parameters obtained depend weakly on the leaving group substituent effect. The reaction is entropy controlled in case the leaving group substituent becomes electron withdrawing.     

Preparation,Crystal Structure,and Thermal Decomposition of the Intriguing Five‐coordinated Compound [Cu(IMI)4Cl]Cl (IMI = Imidazole)

The intriguing multi‐ligand compound [Cu(IMI)₄Cl]Cl ( 1 ) with the ligand imidazole (IMI) was synthesized and characterized by elemental analysis and FT‐IR spectroscopy. The crystal structure was determined by X‐ray single crystal diffraction and the crystallographic data showed that the compound belongs to the monoclinic P2₁/n space group [α = 8.847(2) Å, b = 13.210(3) Å, c = 13.870(3) Å, and β = 90.164(3)°]. Furthermore, the Cu^II ion is five‐coordinated by four nitrogen atoms from four imidazole ligands and a chlorine atom. The thermal decomposition mechanism was determined based on differential scanning calorimetry (DSC) and thermogravimetric (TG‐DTG) analysis. The non‐isothermal kinetics parameters were calculated by the Kissinger's method and Ozawa's method, respectively. The energy of combustion, enthalpy of formation, critical temperature of thermal explosion, entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), and free energy of activation (ΔG^≠) were measured and calculated.     

A Novel Stable High‐Nitrogen Energetic Compound: Copper(II) 1,2–Diaminopropane Azide

The multi‐ligand coordination compound copper(II) 1,2‐diaminopropane (pn) azide, [Cu(pn)(N₃)₂]_n ( 1 ), was synthesized using pn and azido groups. It was characterized by X‐ray single crystal diffraction, elemental analysis, and FT‐IR spectroscopy. The crystal structure of 1 belongs to the monoclinic system, space group C2/c. The copper(II) cation is six‐coordinated by one pn molecule and four azido ligands with μ‐1 and μ‐1,1,3 coordination modes. Thermogravimetric investigations with a heating rate of 10 K · min^–1 under nitrogen showed one main exothermic stage with a peak temperature of 215.7 °C in the DSC curve. The non‐isothermal kinetics parameters were calculated by Kissinger and Ozawa methods, respectively. The heat of combustion was measured by oxygen bomb calorimetry, and the enthalpy of formation, the critical temperature of thermal explosion, the entropy of activation (ΔS^≠), the enthalpy of activation (ΔH^≠), and the free energy of activation (ΔG^≠) were calculated. The measurements showed that 1 has very high impact, friction, and flame sensitivities.     

Synthesis,Crystal Structure,Thermal and Explosive Properties of [Cd(SCZ)3(H2O)](PA)2·3H2O (SCZ = Semicarbazide,PA = Picrate)

The heptacoordinate transition metal coordination compound [Cd(SCZ)₃(H₂O)](PA)₂ · 3H₂O ( 1 ) with the ligand semicarbazide (SCZ) and the counteranion picrate (PA) was synthesized and characterized by elemental analysis and FTIR spectroscopy. Single‐crystal X‐ray diffraction analysis revealed that 1 crystallizes in the monoclinic space group P21/c. The Cd²⁺ ion is heptacoordinated by three SCZ groups and a water molecule. SCZ presents typical bidentate coordination modes. The thermal decomposition mechanism of 1 was studied by differential scanning calorimetry (DSC), which revealed that complex 1 exhibits three small endothermic and two large exothermic processes. The non‐isothermal kinetics parameters were calculated by the Kissinger's method and Ozawa‐Doyle's method, respectively. The heat of combustion was measured by oxygen bomb calorimetry. The enthalpy of formation, the critical temperature of thermal explosion, the entropy of activation (ΔS^≠), the enthalpy of activation (ΔH^≠), and the free energy of activation (ΔG^≠) were also calculated. Sensitivity tests revealed that 1 is insensitive to mechanical stimuli.     

Thermal characterization and kinetic analysis of nano‐ and micro‐Al/NiO thermites: Combined experimental and molecular dynamics simulation study

In the experimental part of this study, thermal properties of the Al and NiO composites in micro‐ and nano‐sized Al are investigated. Differential scanning calorimetry (DSC) analysis of the onset temperatures of ignition, activation energy (E_a), frequency factor (A), rate constant (k), critical ignition temperature of thermal explosion (T_b), and self‐accelerating decomposition temperature (T_SADT), as well as the thermodynamic parameters (ΔS^≠ , ΔH^≠ , and ΔG^≠ ) are used to explore the thermal behavior and analyze the kinetics. Thermal analysis suggests that the mechanism is based on solid–solid diffusion and liquid–gas for the nano‐ and micro‐Al/NiO composite, respectively. Our results indicate that the incorporation of nano‐Al particles can significantly reduce the ignition temperature, E_a, A, k, T_b, and T_SADT. In the second part of this work, molecular dynamics (MD) simulation is used to investigate the behavior of Al/NiO thermite reaction using the Reaxff force field to evaluate the experimental results. Theoretically, MD results show 1,154 K as the reaction ignition temperature, which is in reasonably good agreement with experimental temperature of 893°C (1,166 K). The radial distribution function (RDF) shows that no reaction occurs at 500 K but it is complete at 1,200 K.     

Substituent effects on the reactions of aromatic triflones with para‐X‐anilines in methanol: Low intrinsic reactivity and transition state imbalances

A kinetic study is reported for S_NA_r reactions of 2,4,6‐tris(trifluoromethanesulfonyl) anisole 1a with a series of para‐X‐substituted anilines 2a–e in a methanol solution at various temperatures. The substituent effects on free energy (Δ^≠G), enthalpy (Δ^≠H), and entropy (Δ^≠S) of activation are examined. Aniline addition to triflone 1a is characterized by a β_X=0.57, α_Z=0.31, and an imbalance of I = α_Z–β_X=?0.26. The imbalance shows that resonance development lags behind C? N bond formation at the transition state. Interestingly, analysis of the results in terms of Marcus theory reveals that these S_NAr are associated with some extremely low intrinsic reactivity (log k_o=?1.25& © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 255–262, 2011     

Isokinetic Relationships in Alcohol Oxidation with Chromic Acid

The activation parameters for the oxidation of 13 secondary alcohols with chromic acid have been determined. Application of a statistical treatment of Exner [9] shows that the reactions are isoentropic with an average entropy of activation (ΔS^≠) of ?24.0 e. u.     

Amide-exchange reactions in mixtures of N-alkyl amides and in polyamide melt blends

The amide-exchange reactions which cause copolymer formation in polyamide melt blends were studied with mixtures of N-ethylcaproamide and N-hexylacetamide containing small concentrations of caproic acid and hexylamine as a model system for melt blends of aliphatic polyamides. Amide exchange was found to involve acidolysis and aminolysis reactions with no detectable contribution of direct reaction between amide groups. Kinetics data are consistent with formation of an anhydride intermediate in amide acidolysis. Rate constants over the range 200–275°C and activation energies for amide acidolysis and aminolysis reactions are given. Equations are given for calculating amide exchange rates in polyamide melt blends and for relating degree of amide exchange to block copolymer composition.     

Kinetics of Acid Blue 1 Adsorption from Aqueous Solution by Carbonaceous Substrate Produced from Biotic Precursor

Adsorption of acid blue 1 from aqueous solution onto carbonaceous substrate produced from the wood of Paulownia tomentosa was investigated. The samples characterized by FTIR, SEM, EDS and XRD techniques, indicated that the surface functional groups like carboxyl, lactones or phenols and ethers have disappeared at high activation temperature （800 ℃） and as a result porous structure was developed that has a positive effect on the adsorption capacity. Bangham and parabolic diffusion models were applied to the kinetic adsorption data, which show that the adsorption of acid blue 1 was a diffusion controlled process. The reaction rate increased with the increase in temperatures of both the adsorption and activation. Thermodynamic parameters like △E^≠, △H^≠, △S^≠ and △G^≠ were calculated from the kinetic data. The negative values of △S^≠ reflected the decrease in the disorder of the system at the solid-solution interface during adsorption. Gibbs free energy （△G^≠）, representing the driving force for the affinity of dye for the carbon surface, increased with the increase in sample activation and the adsorption temperatures.     

A new coordination compound based on 4-amino-3-(tetrazol-5-yl)-furazan (HAFT): preparation,crystal structure,and thermal properties

Abstract

The green nitrogen-rich coordination compound Cd(SCZ)₂(AFT)₂ (1) (AFT =4-amino-3-(5-tetrazolate)-furazan and SCZ?=?semicarbazide) was first synthesized and characterized by EA and Fourier Transform Infrared (FT-IR). The single crystal was cultivated and determined with X-ray diffraction. It revealed that 1 crystallizes in the monoclinic space group P2₁/c. A Cd²⁺ ion is coordinated by four N atoms and two O atoms to form a distorted octahedral structure. Among them, two nitrogen atoms are from the two AFT ions and the other four atoms are from two SCZ molecules. The thermal decomposition behavior of 1 was studied with DSC and TG-DTG methods. The apparent activation energy (E), thermal stability, and safety parameters (T_SADT, T_TIT, and T_b) were calculated for 1. Moreover, entropy of activation (ΔS^≠), enthalpy of activation (ΔH^≠), free energy of activation (ΔG^≠), specific heat capacity (C_p), and impact sensitivity were also discussed in detail.     

Ab initio studies of three-membered ring formation through intramolecular nucleophilic substitution

Three-membered ring (3MR) forming processes of ⁻X(SINGLE BOND)CH₂(SINGLE BOND)CH₂(SINGLE BOND)F and ⁻CH₂(SINGLE BOND)C((SINGLE BOND)Y)(SINGLE BOND)CH₂(SINGLE BOND)F (X(DOUBLE BOND)CH₂, O, or S and Y(DOUBLE BOND)0 or S) through a gas phase neighboring group mechanism (S_Ni) are studied theoretically using the ab initio molecular orbital method with the 6–31+G* basis set. When electron correlation effects are considered, the activation (ΔG^≠) and reaction energies (ΔG⁰) are lowered by ca. 10 kcal mol⁻¹, indicating the importance of the electron correlation effect in these reactions. The contribution of entropy of activation (−TΔS^≠) at 298 K to ΔG^≠ is very small, and the reactions are enthalpy controlled. The ΔG^≠ and ΔG⁰ values for these ring closure processes largely depend on the stabilities of the reactants and the heteroatom acting as a nucleophilic center. The Bell–Evans–Polanyi principle applies well to all these reaction series. © 1997 John Wiley & Sons, Inc. J Comput Chem 18 : 1773–1784, 1997     

Linking Conformational Flexibility and Kinetics: Catalytic 1,4‐Type Friedel–Crafts Reactions of Phenols Utilizing 1,3‐Diamine‐Tethered Guanidine/Bisthiourea Organocatalysts

Herein, we present details of our conformationally flexible, 1,3‐diamine‐tethered guanidine/bisthiourea organocatalysts for chemo‐, regio‐, and enantioselective 1,4‐type Friedel–Crafts reactions of phenols. These organocatalysts show a unique stereo‐discrimination governed by the differential activation entropy (ΔΔS^≠), rather than by the differential activation enthalpy (ΔΔH^≠). Extensive kinetic analyses using Eyring plots for a series of guanidine/bisthiourea organocatalysts revealed the key structural motif in the catalysts associated with a large magnitude of differential activation entropy (ΔΔS^≠). A plausible guanidine–thiourea cooperative mechanism for the enantioselective Friedel–Crafts reaction is proposed.     

Amino acids as catalysts for the enolisation study of m-Methylacetophenone

Amino acids have been used as catalysts for the study of kinetic of enolisation of m-Methylacetophenone, in which iodination has been the chosen method. Several parameters like effect of ketone concentration, effect of dielectric constant, effect of catalysts etc. have been investigated for their effect on enolisation kinetics. The study is focused on β-alanine, dl-alanine, l-alanine and Glycine for their effects on the rate. The order of the rate constants obtained has been found to be in the order of increasing dipole moments of the amino acids i.e. l-alanine < Glycine < dl-alanine < β-alanine. With an increase in the temperature from 323 K to 338 K, an increase in the rate was from 1.3 to 2.12 mol^?1 min^?1. The ongoing reaction was found to be bimolecular in nature. The values of different thermodynamic parameters like Entropy (ΔS^≠), Enthalpy (ΔH^≠), Energy of activation (ΔEa) and Gibbs free energy (ΔF^≠) were found to be 6.20 e.u., 24.74 cal mol^?1, 25.20 k cal mol^?1 and 24.54 cal mol^?1 respectively.     

Thermal Behavior and Non-isothermal Decomposition Reaction Kinetics of NEPE Propellant with Ammonium Dinitramide

Thermal decomposition behavior and non‐isothermal decomposition reaction kinetics of nitrate ester plasticized polyether NEPE propellant containing ammonium dinitramide (ADN), which is one of the most important high energetic materials, were investigated by DSC, TG and DTG at 0.1 MPa. The results show that there are four exothermic peaks on DTG curves and four mass loss stages on TG curves at a heating rate of 2.5 K·min^?1 under 0.1 MPa, and nitric ester evaporates and decomposes in the first stage, ADN decomposes in the second stage, nitrocellulose and cyclotrimethylenetrinitramine (RDX) decompose in the third stage, and ammonium perchlorate decomposes in the fourth stage. It was also found that the thermal decomposition processes of the NEPE propellant with ADN mainly have two mass loss stages with an increase in the heating rate, that is the result of the decomposition heats of the first two processes overlap each other and the mass content of ammonium perchlorate is very little which is not displayed in the fourth stage at the heating rate of 5, 10, and 20 K·min^?1 probably. It was to be found that the exothermal peak temperatures increased with an increase in the heating rate. The reaction mechanism was random nucleation and then growth, and the process can be classified as chemical reaction. The kinetic equations of the main exothermal decomposition reaction can be expressed as: dα/dt=10^12.77(3/2)(1?α)[?ln(1?α)]^1/3 e^{?1.723×104/T}. The critical temperatures of the thermal explosion (T_be and T_bp) obtained from the onset temperature (T_e) and the peak temperature (T_p) on the condition of β→0 are 461.41 and 458.02 K, respectively. Activation entropy (ΔS^≠), activation enthalpy (ΔH^≠), and Gibbs free energy (ΔG^≠) of the decomposition reaction are ?7.02 J·mol^?1·K^?1, 126.19 kJ·mol^?1, and 129.31 kJ·mol^?1, respectively.     

Kinetic and Mechanistic Insights into the Pathway Leading to Cyclic Crystalline Phosphorus Ylide Formation in the Presence of 3‐Chloropentane‐2,4‐dione: Theoretical and Stopped‐Flow Approaches

In this work, three speculative mechanisms of the reaction between triphenylphosphine and dimethyl acetylendicarboxylate in the presence of 3‐chloropentane‐2,4‐dione were energetically and thermodynamically developed using quantum mechanical calculations and were profoundly compared with stopped‐flow and UV spectrophotometry approaches. The third speculative mechanism that led to the five‐membered ring structure was experimentally and theoretically favorable. The five‐membered ring structure of product was characterized by X‐ray crystallographic data. Also, steps 1 and 2 of the third mechanism were determined as fast and rate‐determining steps, respectively. The experimental kinetic evidence of the formation and decay of intermediate in steps 1 and 2 (fast and rate‐determining steps, respectively) was compatible with theoretical data. Experimental kinetic data were recognized for overall reaction along with activation parameters for fast and rate‐determining steps of the reaction. Theoretical kinetic data (k and E_a) and activation parameters (ΔG^≠, ΔS,^≠ and ΔH^≠) were calculated for each step and overall reactions.     

Preparation,crystal structure,and thermal decomposition of an azide energetic compound [Cd(IMI)2(N3)2]n (IMI = imidazole)

Cadmium(II) imidazole (IMI) azide [Cd(IMI)₂(N₃)₂]_n (1) was synthesized using imidazole and azide, and was characterized by the elemental analysis and FTIR spectrum. The crystal structure was determined by X-ray single crystal diffraction, and the crystallographic data show that the crystal belongs to orthorhombic, Pba2 space group, α?=?10.780(4) Å, b?=?13.529(5) Å, and c?=?3.6415(12) Å. Its crystal density is 2.080?g·cm^–3. Cd(II) is a six-coordinate with six nitrogens from four imidazoles and two azides with μ–1,1 coordination. The thermal decomposition mechanism was determined based on differential scanning calorimetry (DSC) and thermogravimetry-derivative thermogravimetry (TG-DTG) analysis, and the kinetic parameters of the first exothermic process were studied using Kissinger’s method and Ozawa’s method, respectively. The energy of combustion, enthalpy of formation, critical temperature of thermal explosion, entropy of activation (ΔS ^≠), enthalpy of activation (ΔH ^≠), and free energy of activation (ΔG ^≠) were measured and calculated. In the end, impact sensitivity was also determined by standard method.     

Synthesis,crystal structures and thermal stabilities of zinc coordination polymers containing the 3-hydrazino-4-amino-1,2,4-triazole ligand

Two zinc coordination polymers, {[Zn(HATr)₂](NO₃)₂}_n (1) and {[Zn₂(HATr)₄](ZnCl₄)(NO₃)₂·H₂O}_n (2), were synthesized from reactions of 3-hydrazino-4-amino-1,2,4-triazole dihydrochloride (HATr·2HCl) with Zn(NO₃)₂. The polymers were characterized by single-crystal X-ray diffraction, Fourier transform infrared spectroscopy (FTIR), elemental analysis, and differential scanning calorimetry. The crystal structures revealed that 1 and 2 have 1-D-chain structures, which were further assembled to form 3-D-frameworks by hydrogen bonds. Thermal analyses showed that these two compounds have thermal stability up to 280 °C. The energies of combustion, enthalpies of formation, critical temperatures of thermal explosion, entropies of activation (ΔS^≠), enthalpies of activation (ΔH^≠), and free energies of activation (ΔG^≠) were also measured and calculated. Furthermore, the sensitivities of 1 and 2 toward impact, friction, and static were determined, which revealed that 1 and 2 were less sensitive than Ni(N₂H₄)₃(NO₃)₂.     

Polyesters containing sulfur. VII. New aliphatic‐aromatic polyesters for synthesis of polyester‐sulfur compositions and polyurethanes

New linear polyesters containing sulfur in the main chain were obtained by melt polycondensation of diphenylmethane‐4,4′‐bis(methylthioacetic acid) (DBMTAA) or diphenylmethane‐4,4′‐bis(methythiopropionic acid) (DBMTPA) and diphenylmethane‐4,4′‐bis(methylthioethanol) (DBMTE) at equimolar ratio of reagents (polyesters E‐A and E‐P) as well as at 0.15 molar excess of diol (polyesters E‐A_OH and E‐P_OH). The kinetics of these reactions was studied at 150, 160, and 170°C. Reaction rate constants (k₂) and activation parameters (ΔG^≠, ΔH^≠, ΔS^≠) from carboxyl group loss were determined using classical kinetic methods. E‐A and E‐P (M̄_n = 4400, 4600) were used for synthesis of new rubber‐like polyester‐sulfur compositions, by heating with elemental sulfur, whereas oligoesterols E‐A_OH and E‐P_OH (M̄_n = 2500, 2900) were converted to thermoplastic polyurethane elastomers by reaction with hexamethylene diisocyanate (HDI) or methylene bis(4‐phenyl isocyanate) (MDI). The structure of the polymers was determined by elemental analysis, FT‐IR and liquid or solid‐state ¹H‐, ¹³C‐NMR spectroscopy, and X‐ray diffraction analysis. Thermal properties were measured by DTA, TGA, and DSC. Hardness and tensile properties of polyurethanes and polyester‐sulfur compositions were also determined. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 835–848, 1999     

Preparation and properties of polyesters from diphenylmethane-4,4′-di(methylthiopropionic acid) and aliphatic diols

The new linear polyesters containing sulfur in the main chain were obtained by melt polycondensation of diphenylmethane-4,4′-di(methylthiopropionic acid) with ethanediol, 1,3-propanediol, 1,4-butanediol, 1,5-pentanediol, 1,6-hexanediol, 1,2-propanediol, 1,3-butanediol, and 2,2′-oxydiethanol. Low-molecular weights, low-softening temperatures and, very good solubility in organic solvents are their characteristics. The structure of all polyesters was determined by elemental analysis, FT-IR and ¹H-NMR spectroscopy, and x-ray diffraction analysis. The thermal behavior of these polymers was examined by differential thermal analysis (DTA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The kinetics of polyesters formation by uncatalyzed melt polycondensation was studied in a model system: diphenylmethane-4,4′-di(methylthiopropionic acid) and 1,4-butanediol or 2,2′-oxydiethanol at 150, 160, and 170°C. Reaction rate constants (k₃) and activation parameters (ΔG^≠, ΔH^≠, ΔS^≠) from carboxyl group loss were determined using classical kinetic methods. © 1997 John Wiley & Sons, Inc.