二甲基甲酰胺中四种钕盐的电导

通过电导测量研究了四种钕盐：Nd(CF3SO3)3、Nd(ClO4)3、Nd(NO3)3和NdCl3在极性非质子溶剂DMF中的电导性质.利用线性拟合方法求得在25 ℃下Nd(CF3SO3)3和Nd(ClO4)3的极限摩尔电导率分别为278.8和 280.7 S•cm2•mol－1.用间接方法求得Nd(NO3)3 与NdCl3 的极限摩尔电导率分别为297.2和287.3 S•cm2 •mol－1.在25～65 ℃温度范围内，Nd(CF3SO3)3和Nd(ClO4)3的电导率随温度呈线性变化. Nd(NO3)3和NdCl3的电导行为表现出明显的离子缔合.     

Syntheses of ketonated disulfide-bridged diruthenium complexes via C-H bond activation and C-S bond formation

The alpha-C-H bonds of 3-methyl-2-butanone, 3-pentanone, and 2-methyl-3-pentanone were activated on the sulfur center of the disulfide-bridged ruthenium dinuclear complex [(RuCl(P(OCH3)3)2)2(mu-S2)(mu-Cl)2] (1) in the presence of AgX (X = PF6, SbF6) with concomitant formation of C-S bonds to give the corresponding ketonated complexes [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCHR1COR2)(Ru(CH3CN)3(P(OCH3)3)2)]X3 ([5](PF6)3, R1 = H, R2 = CH(CH3)2, X = PF6; [6](PF6)3, R1 = CH3, R2 = CH2CH3, X = PF6; [7](SbF6)3, R1 = CH3, R2 = CH(CH3)2, X = SbF6). For unsymmetric ketones, the primary or the secondary carbon of the alpha-C-H bond, rather than the tertiary carbon, is preferentially bound to one of the two bridging sulfur atoms. The alpha-C-H bond of the cyclic ketone cyclohexanone was cleaved to give the complex [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SS-1- cyclohexanon-2-yl)(Ru(CH3CN)3(P(OCH3)3)2)](SbF6)3 ([8](SbF6)3). And the reactions of acetophenone and p-methoxyacetophenone, respectively, with the chloride-free complex [(Ru(CH3CN)3(P(OCH3)3)2)2(mu-S2)]4+ (3) gave [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCH2COAr)(Ru(CH3CN)3(P(OCH3)3)2)](CF3SO3)3 ([9](CF3SO3)3, Ar = Ph; [10](CF3SO3)3, Ar = p-CH3OC6H4). The relative reactivities of a primary and a secondary C-H bond were clearly observed in the reaction of butanone with complex 3, which gave a mixture of two complexes, i.e., [(Ru(CH3CN)2(P(OCH3)3)20(mu-SSCH2COCH2CH3)(Ru(CH3CN)3(P(OCH3)3)2)](CF3SO3)3 ([11](CF3SO3)3) and [(Ru(CH3CN)2(P(OCH3)3)2)(mu-SSCHCH3COCH3)(Ru(CH3CN)3(P(OCH3)2)](CF3SO3)3 ([12](CF3SO3)3), in a molar ratio of 1:1.8. Complex 12 was converted to 11 at room temperature if the reaction time was prolonged. The relative reactivities of the alpha-C-H bonds of the ketones were deduced to be in the order 2 degrees > 1 degree > 3 degrees, on the basis of the consideration of contributions from both electronic and steric effects. Additionally, the C-S bonds in the ketonated complexes were found to be cleaved easily by protonation at room temperature. The mechanism for the formation of the ketonated disulfide-bridged ruthenium dinuclear complexes is as follows: initial coordination of the oxygen atom of the carbonyl group to the ruthenium center, followed by addition of an alpha-C-H bond to the disulfide bridging ligand, having S=S double-bond character, to form a C-S-S-H moiety, and finally completion of the reaction by deprotonation of the S-H bond.     

MRD CI study on the low-lying states of AlP

Large-scale MRD CI calculations assign to AlP the ground state X ³Σ⁻ (9σ²3π²) and a close-lying state 1 ³Π (9σ3π³) (T_e = 0.08 eV). Up to transition energies of 2.0 eV, other states are described by the configurations 9σ3π³ (1¹Π), 8σ²3π⁴ (1 ¹Σ⁺), 9σ²3π² (1 ¹Δ and 2 ¹Σ⁺) and 9σ3π²4π (1 ⁵Π). The 2 ³Π state, located at ≈ 2.30 eV, shows a shallow double minimum. Numerous perturbations are expected to induce predissociation upon 2 ³Π. Multiplets arising from the occupation 8σ²3π³4π are clustered in the 3.25–3.50 eV region. Quintet states with the configuration 8σ9σ3π³4π are bound, with T_e values (in eV) of 3.80 (1 ⁵Σ⁺), 4.44 (1 ⁵Δ) and 4.88 (3 ⁵Σ⁻), respectively. The 9σ → 4s Rydberg members ⁵Σ⁻ and ³Σ⁻ lie in the 4.58–4.72 eV energy region. The first ionization potential (ionization to X⁴Σ⁻ of AlP⁺, 9σ → ∞) is estimated to be 7.65 eV. Ionization to the 1 ²Σ⁻ and 1 ²Π states of AlP⁺ is suggested to occur between 8.0 and 8.8 eV. The dipole moments of X ³Σ⁻, 1 ¹Δ and 2 ¹Σ⁺ are close to 1.0 D, whereas the 1 ¹Σ⁺ state has μ = 3.49 D; 1 ³Π and 1 ¹Π have dipole moments from 2.45 to 2.91 D. All low-lying states show a polarity Al⁺P⁻. Finally, the electronic structure and transition energies of AlP are compared with those of the isoelectronic species BN, AIN, and SiP⁺.     

Cation-anion interactions in 1-ethyl-3-methylimidazolium trifluoromethanesulfonate-based ionic liquid electrolytes

An important step in developing ionic-liquid-based electrolytes for lithium rechargeable batteries is obtaining a molecular-level understanding of the ionic interactions that occur in these systems. In this study, 1-ethyl-3-methylimidazolium trifluoromethansulfonate ([C2mim]CF3SO3) is complexed with LiCF3SO3, and the local structures of the CF3SO3- and [C2mim]+ ions are investigated with infrared and Raman spectroscopy. The isolation and subsequent refinement of a Li[C2mim](CF3SO3)2 crystal provides further insight into the structure of the [C2mim]CF3SO3-LiCF3SO3 solutions. Minor changes are observed in the infrared and Raman spectra of dilute [C2mim]CF3SO3-LiCF3SO3 solutions compared to pure [C2mim]CF3SO3. However, a suspension of very small Li[C2mim](CF3SO3)2 crystallites forms at a solution composition of [C2mim]CF3SO3:LiCF3SO3 = 10:1 (mole ratio), placing an upper limit on the solubility of LiCF3SO3. Essentially no changes are observed in the vibrational modes of the [C2mim]+ cations over the entire range of LiCF3SO3 compositions studied, suggesting that the addition of these compounds does not significantly perturb the local structure of the [C2mim]+ cations. The salt used in this study has a common anion with the ionic liquid; thus, the ion cloud surrounding the [C2mim]+ ions, which must be primarily composed of CF3SO3- anions, is not significantly altered with the addition of LiCF3SO3.     

Reduction reactions of a 1,3,5-triphosphabenzene

The reactions of the triphosphabenzene, 1,3,5-P3C3But3, with LiMH4, M = Al or Ga, lead to the triphosphabicyclo[3.1.0]hexanediyl metallate complexes, [[[Li(OEt2)][MH2(P3C3But3H2)]]2], which give exo- and endo-isomers of a triphosphabicyclo[3.1.0]hexane, P3C3But3H4 upon quenching. The related reaction of [AlH3(NMe3)] with 1,3,5-P3C3But3 affords three identifiable products, viz. a triphosphabicyclo[3.1.0]hexenyl complex, [AlH2(P3C3But3H)(NMe3)], and two triphosphabicyclo[3.1.0]hexanediyl complexes, [AlH(P3C3But3H2)(NMe3)] and [Al2H4(P3C3But3H2)(NMe3)]. In contrast, the reactions of 1,3,5-P3C3But3 with either [GaH3(quin)], quin = quinuclidine, or Me3SnH lead only to the triphosphabicyclo[3.1.0]hexenyl complexes, [GaH2(P3C3But3H)(quin)] and [Me3Sn(P3C3But3H)]. Quenching of the former affords a triphosphabicyclo[3.1.0]hexene, P3C3But3H2, while quenching the latter gives its triphosphacyclohexa-1,4-diene valence isomer. Treatment of 1,3,5-P3C3But3 with "GaI" yields a GaI3 complex of the triphosphahexa-1,4-diene, [GaI3(P3C3But3H2)], whilst treatment with the anionic Ga(I) heterocycle, [:Ga[N(Ar)C(H)]2]-, Ar = C6H3Pri2-2,6, affords the known diphospholyl anion, [1,3-P2C3But3]- via a P-abstraction from the triphosphabenzene. Finally, reaction of the 1,3,5-triphosphacyclohexane, [P(OEt)C(H)(But)]3, with thionyl chloride yields the unusual lambda5, lambda5, lambda5-1,3,5-triphosphacyclohexane, [P(O)(Cl)C(H)(But)]2[P(OEt)(S)C(H)(But)]. Suggestions as to the mechanisms of a number of these reduction reactions are made and the crystal structures of seven compounds are reported.     

Bond additivity corrections for G3B3 and G3MP2B3 quantum chemistry methods

We have developed bond additivity correction (BAC) procedures for the G3-based quantum chemistry methods, G3B3 and G3MP2B3. We denote these procedures as BAC-G3B3 and BAC-G3MP2B3. We apply the procedures to compounds containing atoms from the first three rows of the periodic table including H, B, C, N, O, F, Al, Si, P, S, and Cl atoms. The BAC procedure applies atomic, molecular, and pairwise bond corrections to theoretical heats of formation of molecules. The BAC-G3B3 and BAC-G3MP2B3 procedures require parameters for each atom type but not for each bond type. These parameters have been obtained by minimizing the error between the BAC-G3B3 and BAC-G3MP2B3 predictions and the experimental heats of formation for a 155 molecule reference set, containing open and closed shell molecules representing various functional groups, multireference configurations, isomers, and degrees of saturation. As compared to former BAC-MP4, BAC-G2, and BAC-hybrid methods, BAC-G3B3 provides better agreement with experiment for a wider range of chemical moieties, including highly oxidized species involving SOx s, NOx s, POx s, and halogens. The BAC-G3B3 and BAC-G3MP2B3 procedures are applied to an extended test suite involving 273 compounds. We assess the overall quality of BAC-G3B3 with experiments and other theoretical approaches. For the reference set, the average error for the BAC-G3B3 results is 0.44 kcal/mol as compared to 0.82 kcal/mol for the raw G3B3. For the extended test set, the average error for the BAC-G3B3 results is 0.91 kcal/mol as compared to 1.38 kcal/mol for the raw G3B3. As compared to the other BAC procedures, the improved predictive capability of BAC-G3B3 and BAC-G3MP2B3 procedures is, to a large extent, due to the improved quality of G3-based methods resulting in much smaller BAC correction terms.     

Cholesterol levels and plasma membrane fluidity in 3T3 and SV101-3T3 cells.

Polyene antibiotics such as filipin selectively inhibit wheat germ agglutinin-induced agglutination of transformed and malignant cells compared to normal cells (Hatten ME, Burger MM: Biochemistry 18: 739, 1979). Since filipin binds specifically to cholesterol, we measured cholesterol levels in 3T3 cells and SV101-3T3 cells. SV101-3T3 cells contained 50-100% more cholesterol per cell than 3T3 cells. Both cell types were starved for cholesterol by growth in lipid-depleted medium plus 25-hydroxycholesterol. The cholesterol level of SV101-3T3 cells decreased by 30-50%, while the level in 3T3 cells remained constant. Filipin-stained SV101-3T3 cells revealed bright patches of filipin under fluorescence microscopy. These patches were absent in 3T3 cells and in SV101-3T3 and 3T3 cells starved for cholesterol. We selectively labeled plasma membranes of these cells with a spin label analog of phosphatidylcholine. The spin label indicated differences in plasma membrane fluidity that may be related to the different cholesterol levels in 3T3 and SV101-3T3 cells.     

KMgF3:Ce3+,Tb3+纳米粒子中Ce3+→Tb3+的发光及能量传递

利用微乳液方法,合成了铈、铽共掺杂的氟镁钾纳米粒子,研究了体系中Ce3+→Tb3+的发光特性以及它们之间的相互作用,结果表明KMgF3:Ce3+Tb3+纳米粒子中存在Ce3+→Tb3+的能量传递过程,即Ce3+可以将吸收的能量直接传递给Tb3+离子,使得Tb3+的绿色发光强度大为增加.     

Yttrium and erbium halide complexes with [{Ti(eta5-C5Me5)(mu-NH)}3(mu3-N)] as a neutral tridentate ligand

Treatment of [{TiCp*(mu-NH)} 3(mu 3-N)] ( 1; Cp* = eta (5)-C 5Me 5) with yttrium and erbium halide complexes [MCl 3(THF) 3.5] and [MCpCl 2(THF) 3] (Cp = eta (5)-C 5H 5) gives cube-type adducts [Cl 3M{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}] and [CpCl 2M{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}]. An analogous reaction of 1 with [{MCp 2Cl} 2] in toluene affords [Cp 3M(mu-Cl)ClCpM{(mu 3-NH) 3Ti 3Cp* 3(mu 3-N)}] (M = Y, Er).     

Gold as hydrogen: structural and electronic properties and chemical bonding in Si3Au3(+0-) and comparisons to Si3H3(+0-)

A single Au atom has been shown to behave like H in its bonding to Si in several mono- and disilicon gold clusters. In the current work, we investigate the AuH analogy in trisilicon gold clusters, Si3Au3(+0-). Photoelectron spectroscopy and density functional calculations are combined to examine the geometric and electronic structure of Si3Au3-. We find that there are three isomers competing for the ground state of Si3Au3- as is the case for Si3H3-. Extensive structural searches show that the potential energy surfaces of the trisilicon gold clusters (Si3Au3-, Si3Au3, and Si3Au3+) are similar to those of the corresponding silicon hydrides. The lowest energy isomers for Si3Au3- and Si3Au3 are structurally similar to a Si3Au four-membered ring serving as a common structural motif. For Si3Au3+, the 2pi aromatic cyclotrisilenylium auride ion, analogous to the aromatic cyclotrisilenylium ion (Si3H3+), is the most stable species. Comparison of the structures and chemical bonding between Si3Au3(+0-) and the corresponding silicon hydrides further extends the isolobal analogy between Au and H.     

Si(CH3)3Cl分子电离电势和化学键能的测定

The photoionization spectroscopy of Si(CH3)3Cl in the range of 50 -130 nm was studied with synchrotron radiation source. The adiabatic ionization potentials of molecule Si(CH3)3Cl and radical Si(CH3)3 are 10.06 ±0.02 eV and 7.00±0.03 eV respectively. In addition, the appearance potentials of Si(CH3)2Cl+, Si(CH3)3+, SiCl+ and SiCH3+ were determined:
AP(Si(CH3)2Cl+) ＝10.49±0.02eV, AP(Si(CH3)3+) ＝ 11.91 ±0.02eV
AP(SiCl+) ＝ 18.64 ±0.06eV, AP(SiCH3+)＝ 18.62 ±0.02eV
From these, some chemical bond energies of Si(CH3)3Cl+ were calculated:
D(Si(CH3)2Cl+ - CH3) ＝0.43 ±0.02eV, D(Si(CH3)3+ - Cl) ＝ 1.85 ± 0.02eV
D(SiCH3+ - (2CH3 ＋ Cl)) ＝ 8.56 ± 0．06eV, D(SiCH3+ - 2CH3) ＝6.71±0．06eV
D(SiCl+ - 3CH3) ＝ 8.58 ± 0.06eV, D(SiCl＋- 2CH3) ＝ 8.15 ±0.06eV
D(SiCH3+- (CH3 ＋ Cl)) ＝8.13 ±0.06eV     

Synthesis of [(HIPTNCH2CH2)3N]V compounds (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) and an evaluation of vanadium for the reduction of dinitrogen to ammonia

Green [HIPTN3N]V(THF) ([HIPTN3N]3- = [(HIPTNCH2CH2)3N]3-, where HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3) can be prepared in a 70-80% yield via the addition of H3[HIPTN3N] to VCl3(THF)3 in THF, followed by the addition of LiN(SiMe3)2. From [HIPTN3N]V(THF), the following have been prepared: {[HIPTN3N]VN2}K, [HIPTN3N]V(NH3), [HIPTN3N]V=NH, [HIPTN3N]V=NSiMe3, [HIPTN3N]V=O, [HIPTN3N]V=S, and [HIPTN3N]V(CO). No ammonia is formed from dinitrogen using {[HIPTN3N]VN2}K, [HIPTN3N]V=NH, or [HIPTN3N]V(NH3) as the initial species under conditions that were successful in the analogous [HIPTN3N]Mo system. X-ray structural studies are reported for [HIPTN3N]V(THF) and [HIPTN3N]V(NH3).     

Synthesis of 2‐Arylquinazolin‐4(3H)‐ones by N‐Aryl Benzamidines with Aromatic Carbonates

The reaction of N‐aryl benzamidines 1a , 1b , 1c , 1d , 1e , 1f , 1g , 1h , 1i , 1j , 1k , 1l , 1m , 1n with diphenyl carbonate 2a or ethyl phenyl carbonate 2b synthesized 2‐arylquinazolin‐4(3H)‐ones 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h , 3i , 3j , 3k , 3l , 3m , 3n in simple and safe process with good yields (71–90%). It was suggested that different electron‐donating substituent in N‐aryl benzamidines 1a , 1b , 1c , 1d , 1e , 1f , 1g , 1h , 1i , 1j , 1k , 1l , 1m , 1n afforded similar effect to the yields of 2‐arylquinazolin‐4(3H)‐ones 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h , 3i , 3j , 3k , 3l , 3m , 3n . In these reactions, N‐aryl benzamidines 1a , 1b , 1c , 1d , 1e , 1f , 1g , 1h , 1i , 1j , 1k , 1l , 1m , 1n built up intermediate compounds by nucleophilic addition to carbonates 2 to give annulation products 3a , 3b , 3c , 3d , 3e , 3f , 3g , 3h , 3i , 3j , 3k , 3l , 3m , 3n , following to cyclization involving the elimination of ethanol/phenol.     

双羰基侧链取代喹喔啉－1，4－二氧化物的合成

应用改良的Ｂｅｉｒｕｔ反应合成了５个双羰基侧链取代喹喔啉－１，４－二氧化物（３ａ～３ｅ）。     

Lanthanide(III) and group 13 metal ion complexes of tripodal amino phosphinate ligands

The tripodal amino-phosphinate ligands, tris(4-(phenylphosphinato)-3-benzyl-3-azabutyl)amine (H(3)ppba.2HCl.H(2)O) and tris(4-(phenylphosphinato)-3-azabutyl)amine (H(3)ppa.HCl.H(2)O) were synthesized and reacted with Al(3+), Ga(3+), In(3+) and the lanthanides (Ln(3+)). At 2 : 1 H(3)ppba to metal ratios, complexes of the type [M(H(3)ppba)(2)](3+)(M = Al(3+), Ga(3+), In(3+), Ho(3+)-Lu(3+)) were isolated. The bicapped [Ga(H(3)ppba)(2)](NO(3))(2)Cl.3CH(3)OH was structurally characterized and was shown indirectly by various techniques to be isostructural with the other [M(H(3)ppba)(2)](3+) complexes. Also, at 2 : 1 H(3)ppba to metal ratios, complexes of the type [M(H(4)ppba)(2)](5+)(M = La(3+)-Tb(3+)) were characterized, and the X-ray structure of [Gd(H(4)ppba)(2)](NO(3))(4)Cl.3CH(3)OH was determined. At 1 : 1 H(3)ppba to metal ratios, complexes of the type [M(H(4)ppba)](4+)(M = La(3+)-Er(3+)) were isolated and characterized. Elemental analysis and spectroscopic evidence supported the formation of a 1 : 1 monocapped complex. Reaction of 1 : 1 ratios of H(3)ppa with Ln(3+) and In(3+) yielded complexes of the type [M(H(3)ppa)](3+)(M = La(3+)-Yb(3+)) but with Ga(3+), complex of the type [Ga(ppa)].3H(2)O was obtained. Reaction of 1 : 1 ratios of H(3)ppa with Ln(3+) and In(3+) yielded complexes of the type [M(H(3)ppa)](3+)(M = La(3+)-Yb(3+)) but with Ga(3+) a neutral complex [Ga(ppa)].3H(2)O was obtained. The formation of an encapsulated 1 : 1 complex is supported by elemental analysis and spectroscopic evidence.     

Azido- or hydroxyl-capped half-cubanes containing Cp*Rh fragments: [Cp*3Rh3(mu-X)3(mu3-X)]2+ (X-=OH- or N3-)

Treatment of [Cp*Rh(H(2)O)(3)](OTf)(2) (1) with Me(3)SiNH-t-Bu in acetone gave a hydroxyl-capped half-cubane [Cp*(3)Rh(3)(mu-OH)(3)(mu(3)-OH)](OTf)(3)(t-BuNH(3)) (2). Slow diffusion of Me(3)SiN(3) in diethyl ether into compound in acetone produced an azido-capped half-cubane [Cp*(3)Rh(3)(mu-N(3))(3)(mu(3)-N(3))](OTf)(2) (3). On the other hand, treating 1 with Me(3)SiN(3) in acetone gave an azido-bridged, dinuclear rhodium(III) complex [Cp*Rh(mu-N(3))(OH(2))](2)(OTf)(2) (4). Complexes 2 and 3 represent the first azido- or hydroxyl-capped, incomplete cubane-type Rh clusters. Under appropriate conditions, complexes 2 and 3 could be converted to complex 4. The structures of all products were determined by X-ray diffraction.     

Synthesis of 3-nitro- and 3-aminoquinoline-2,4-diones. An unexpected route to 3-hydroxyquinoline-2,4-diones

Nitration of 3-substituted-4-hydroxy-2(1H)-quinolones 1 with nitric acid leads either to 3-nitro- 2 or 3-hydroxyquinolinediones 3 , depending on the reaction conditions. 3-Substituted-3-hydroxyquinolinediones 3 are also obtained by oxidative hydroxylation with peracetic acid. Amination of 3-substituted-3-chloroquinolinediones 4 with ammonium hydroxide predominantly leads again to 3-substituted-3-hydroxyquinolinediones 3 , only in one case the 3-aminoquinolinedione 5 could be isolated. With morpholine or pyridine as amines the expected 3-aminoquinolinediones 6 and 7 were obtained.     

Trinuclear silver(I) complexes of fluorinated pyrazolates

Silver pyrazolates [[3-(CF3)Pz]Ag]3, [[3-(CF3),5-(CH3)Pz]Ag]3, [[3-(CF3),5-(Ph)Pz]Ag]3, [[3-(CF3),5-(But)Pz]Ag]3, and [[3-(C3F7),5-(But)Pz]Ag]3 have been synthesized by treatment of the corresponding pyrazole with a slight molar excess of silver(I) oxide. This economical and convenient route gives silver pyrazolates in high (>80%) yields. X-ray crystal structures of [[3-(CF3),5-(CH3)Pz]Ag]3, [[3-(CF3),5-(But)Pz]Ag]3, and [[3-(C3F7),5-(But)Pz]Ag]3 show that these molecules have trinuclear structures with essentially planar to highly distorted Ag3N6 metallacycles. [[3-(CF3),5-(CH3)Pz]Ag]3 forms extended columns via intertrimer argentophilic contacts (the closest Ag...Ag separation between the neighboring trimers are 3.355 and 3.426 A). The trinuclear [[3-(CF3),5-(But)Pz]Ag]3 units crystallize in pairs, basically forming "dimers of trimers", with the six silver atom core of the adjacent trimers adopting a chair conformation. However, in these dimers of trimers, even the shortest intertrimer Ag...Ag distance (3.480 A) is slightly longer than the van der Waals contact of silver (3.44 A). [[3-(C3F7),5-(But)Pz]Ag]3, which has two bulky groups on each pyrazolyl ring, shows no close intertrimer Ag...Ag contacts (closest intertrimer Ag...Ag distance = 5.376 A). The Ag-N bond distances and the intratrimer Ag...Ag separations of the silver pyrazolates do not show much variation. However, their N-Ag-N angles are sensitive to the nature (especially, the size) of substituents on the pyrazolyl rings. The pi-acidic [[3,5-(CF3)2Pz]Ag]3 and [[3-(C3F7),5-(But)Pz]Ag]3 form adducts with the pi-base toluene. X-ray data show that they adopt extended columnar structures of the type [[Ag3]2.[toluene]]infinity and [[Ag3]'.[toluene]]infinity ([[3,5-(CF3)2Pz]Ag]3 = [Ag3],[[3-(C3F7),5-(But)Pz]Ag]3 = [Ag3]'), in which toluene interleaves and makes face-to-face contacts with [[3-(C3F7),5-(But)Pz]Ag]3 or dimers of [[3,5-(CF3)2Pz]Ag]3.     

Strong blue emission from Pr3+ ions through energy transfer process from Nd3+ to Pr3+ via Yb3+ in tellurite glass

Energy transfer excited upconversion emission in Nd3+/Pr3+-codped tellurite glass have been studied on pumping with 800 nm wavelength. The upconversion emission bands from Pr3+ ion are observed at the 488, 524, 546, 612, 647, 672, 708 and 723 nm due to the (3P0 + 3P1)-->3H4, 3P1-->3H5, 3P0-->3H5, 3P0-->3H6, 3P0-->3F2, 3P1-->3F3, 3P0-->3F3 and 3P0-->3F4 transitions, respectively. The addition of ytterbium ions (Yb3+) on the upconversion emission intensity is also studied and result shows an eight times enhancement in the upconversion intensity at 488 nm from Pr3+ ions. The pump power and concentration dependence studies are also made. It is found that Yb3+ ions transfer its excitation energy to Nd3+ from which it goes to Pr3+. No direct transfer to Pr3+ is seen. This is verified by codoping Nd3+ and Pr3+ into the host.     

A vacuum ultraviolet photoionization mass spectrometric study of acetone

The photoionization and dissociative photoionization of acetone have been studied at the photon energy range of 8-20 eV. Photoionization efficiency spectra for ions CH3COCH3+, CH3+, C2H3+, C3H3+, C3H5+, CH(2-)CO+, CH3CO+, C3H4O+, and CH3COCH2+ have been measured. In addition, the energetics of the dissociative photoionization has been examined by ab initio Gaussian-3 (G3) calculations. The computational results are useful in establishing the dissociation channels near the ionization thresholds. With the help of G3 results, the dissociation channels for the formation of the fragment ions CH3CO+, CH2CO+, CH3+, C3H3+, and CH3COCH2+ have been established. The G3 results are in fair to excellent agreement with the experimental data.