Chemical reactions in dense monolayers: in situ thermal cleavage of grafted esters for preparation of solid surfaces functionalized with carboxylic acids

The thermodynamics of a chemical reaction confined at a solid surface was investigated through kinetic measurements of a model unimolecular reaction. The thermal cleavage of ester groups grafted at the surface of solid silica was investigated together with complementary physicochemical characterization of the grafted species. The ester molecules were chemically grafted to the silica surface and subsequently cleaved into the carboxylic acids. A grafting process of a reproducible monolayer was designed using the reaction of monofunctional organosilane from its gas phase. The thermal deprotection step of the ester end-group was investigated. The thermal deprotection reaction behaves in quite a specific manner when it is conducted at a surface in a grafted layer. Different organosilane molecules terminated by methyl, isopropyl and tert-butyl ester groups were grafted to silica surface; such functionalized materials were characterized by elemental analysis, IR and NMR spectroscopy, and thermogravimetric analysis, and the thermodynamic parameters of the thermal elimination reaction at the surface were measured. The limiting factor of such thermal ester cleavage reaction is the thermal stability of grafted ester group according to the temperature order: tert-butyl < i-propyl < methyl. Methyl ester groups were not selectively cleaved by temperature. The thermal deprotection of i-propyl ester groups took place at a temperature close to the thermal degradation of the organofunctional tail of the silane. The low thermolysis temperature of the grafted tert-butyl esters allowed their selective cleavage. There is a definite influence of the surface on the reaction. The enthalpy of activation is lower than in the gas phase because of the polarity of the reaction site. The major contribution is entropic; the negative entropy of activation comes from lateral interactions with the neighbor grafted molecules because of the high grafting density. Such reaction is an original strategy to functionalize the silica surface by carboxylic acid groups by means of a simple, reproducible, and efficient process involving in situ thermolysis of ester groups.     

Templated metal catalysis for single nucleotide specific DNA sequence detection

A catalytic DNA-templated reaction of hydrolysis of an ester group in an N-modified peptide nucleic acid, which is activated by a Cu2+ complex-PNA, has been discovered and optimized. Both the ester-containing PNA and the metal complex PNA bind neighboring sites on a template DNA. This brings the reacting groups (the ester and the Cu2+ complex) in proximity to each other and accelerates the hydrolysis of the ester approximately 500 times in comparison with its hydrolysis in the absence of the template. The hydrolysis reaction provides >10(2)-fold kinetic discrimination between DNAs that are different from each other at a single nucleotide position. Natural enzyme T4 DNA ligase is slightly less selective. On the basis of this reaction a fully homogeneous and sensitive assay for sequence-specific DNA detection has been developed (10 fmol DNA). Identification of one of four DNAs (variation at one position) can be done in a single experiment. Since the Cu2+ ion is tightly bound in an associate containing the ester PNA, the metal complex PNA, and the template DNA, application of this method in buffers containing other Cu2+-binding ligands, e.g., PCR buffer and physiological buffer, is possible.     

A New Intramolecular Reaction for the Regioselective Debenzylation or Protection of Alcohols

Strained benzylidene acetals such as 1 can be prepared with a new intramolecular reaction that allows the selective removal of benzyl protecting groups neighboring free OH groups, without attacking other benzyl groups. The mechanism of this reaction, which is useful for carbohydrate synthesis, probably proceeds via ionic intermediates with neighboring group participation.     

Mechanism of intramolecular catalysis in the hydrolysis of alkyl monoesters of 1,8-naphthalic acid

Hydrolysis of alkyl 1,8-naphthalic acid monoesters 1a-d is subject to highly efficient intramolecular nucleophilic catalysis by the neighboring COOH group. The reactivity for the COOH reaction depends on the leaving group pK(a), with values of β(LG) of -0.50, consistent with a mechanism involving rate determining breakdown of tetrahedral addition intermediates. The release of the steric strain of the peri-substitiuents in the highly reactive alkyl 1,8-naphthalic acid monoesters is fundamental to understand the observed special reactivity in this intramolecular reaction. DFT calculations show how the proton transfers involved in the cleavage of the neutral ester can be catalyzed by solvent water, thus facilitating the departure of poor alkoxide leaving groups.     

Stereospecific ester activation in nitrite-mediated carbohydrate epimerization

[reaction: see text] The Lattrell-Dax method of nitrite-mediated substitution of carbohydrate triflates is an efficient method to generate structures of inverse configuration. In the present study, epimerization of gluco- and galactopyranoside derivatives to the corresponding allo- and gulopyranoside structures by triflation/nitrite treatment has been investigated. It was found that a neighboring ester group was essential for the reactivity of the nitrite-mediated triflate inversion. Furthermore, a good inversion yield also depended on the relative configuration of the neighboring ester group to the triflate. Only with the ester group in the equatorial position, whatever the configuration of the triflate, did the reaction proceed smoothly, whereas a neighboring axial ester group proved largely inefficient. The results were subsequently used to predict the inversion of glucopyranoside derivatives to the mannopyranoside epimers.     

Self-assembled helices from 2,2'-biimidazoles

2,2'-Biimidazoles were synthesized by palladium(0)-catalyzed coupling of 2-iodoimidazoles bearing an alkyl and an ester group at the 4- and 5-positions, respectively. The products were found to be fluorescent and moderately soluble in organic solvents. Three biimidazoles were subjected to single crystal X-ray diffraction analysis. In all three instances, adjacent molecules were found to be bound together in the solid state by pairs of N-H...N hydrogen bonds, forming twisted ribbon-like columns which resemble double helices. The amount of helical twist observed between neighboring biimidazole subunits in these helices varies with the identity of the alkyl and ester groups; in two cases it is approximately 60 degrees, whereas in the third it is about 90 degrees. Mass spectra of six different biimidazoles display ions with masses corresponding to dimers; this indicates that these compounds retain some affinity for each other in the gas phase. The three most soluble biimidazoles also show mass spectrometric peaks ascribable to trimers and tetramers. The solution-phase aggregation tendencies of these latter three compounds were studied by vapor pressure osmometry. In each case, the apparent molecular weight in 1,2-dichloroethane solution is higher than would be expected for free monomers.     

Efficient synthesis of beta-D-mannosides and beta-D-talosides by double parallel or double serial inversion

A neighboring equatorial ester group plays a highly important role in the Lattrell-Dax (nitrite-mediated) carbohydrate epimerization reaction, inducing the formation of inversion compounds in good yields. On the basis of this effect, efficient synthetic routes to beta-D-mannosides and beta-D-talosides, from the corresponding beta-D-galactosides and beta-D-glucosides, have been designed. The present routes are based on multiple regioselective acylation via the respective stannylene intermediates, followed by inversions to the corresponding manno- and talopyranoside structures by nitrite or acetate substitution. It was found that the ester group was able to induce the inversion of its two neighboring groups in high yields following either a double parallel or a double serial inversion process. By combination of direct inversion, and neighboring- as well as remote-group participation, several beta-d-mannoside and beta-D-taloside derivatives were very conveniently obtained in good yields.     

Synthesis and photochemical properties of novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups

Novel multifunctional photopolymers with both pendant epoxy groups and phenacyl ester groups were synthesized by the one‐pot method for the reaction of poly(methacrylic acid) with epibromohydrin; this was followed by a reaction with phenacylbromide with 1,8‐diazabicyclo‐[5.4.0]undecene‐7 as a condensation reagent. These esterification reactions proceeded smoothly and quantitatively under mild conditions. Moreover, the photochemical reactions of the resulting polymers were evaluated by UV and IR spectroscopy. The pendant phenacyl ester groups were photocleaved to give corresponding carboxyl groups, and then the produced carboxyl groups reacted with pendant epoxy groups. Furthermore, the baking process promoted a crosslinking reaction because of the addition reaction of epoxy groups with carboxyl groups after irradiation. It was also proven that the photochemical reactivity of the resulting polymers was affected by the structure of the phenacyl ester group. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 530–538, 2001     

Electrochemical Oxidation of Quercetin

The mechanism of electrochemical oxidation of quercetin on a glassy carbon electrode has been studied using cyclic, differential pulse and square‐wave voltammetry at different pH. It proceeds in a cascade mechanism, related with the two catechol hydroxyl groups and the other three hydroxyl groups which all present electroactivity, and the oxidation is pH dependent. Quercetin also adsorbs strongly on the electrode surface; and the final oxidation product is not electroactive and blocks the electrode surface. The oxidation of the catechol 3′,4′‐dihydroxyl electron‐donating groups, occurs first, at very low positive potentials, and is a two electron two proton reversible reaction. The hydroxyl group oxidized next was shown to undergo an irreversible oxidation reaction, and this hydroxyl group can form a intermolecular hydrogen bond with the neighboring oxygen. The other two hydroxyl groups also have an electron donating effect and their oxidation is reversible.     

Photoreaction between benzoylthiophenes and N-BOC-tryptophan methyl ester

Drug-induced photoallergy requires as the first step formation of covalent drug-protein photoadducts. One of the key amino acids involved in this process is tryptophan (Trp). In this context, several diaryl ketones, including 2-benzoylthiophene (BT), [2-(5-benzoyl-5-thienyl)]-2-methylpropanoic methyl ester (TPA methyl ester) and 4-(2-thienylcarbonyl)phenyl]-2-methylpropanoic methyl ester (SUP methyl ester) have been irradiated in the presence of N-BOC-(L)-tryptophan methyl ester. Laser flash photolysis has allowed to detect three neutral radicals (ketyl, indolyl and skatolyl radicals) resulting from formal hydrogen-atom abstraction. This correlates well with the isolation of homodimers, as well as with cross-coupling products, in the preparative irradiation. The main cross-coupling products were in all cases lactones arising from the reaction of the Trp-derived skatolyl radicals with the corresponding ketyl radicals. These lactones were obtained as the (4R) stereoisomers with remarkable diasteroselectivity. No coupling products through the phenyl p-position of BT or TPA methyl ester were found. By contrast, ketone homodimers and cross-coupling products arising from reaction through the thienyl 5-position were obtained when using BT and SUP methyl ester; this is very interesting, because stable LAT-derived products are difficult to isolate.     

含酯基烯烃选择性硼氢化碘化反应：两种昆虫性信息素的合成

不饱和烃经硼氢化反应生成的硼烷在碱性及温和条件下与碘作用,可以获得产率较高的碘化物。然而,硼氢化碘化反应因需要强碱性条件而可能对许多对碱敏感基团产生不利影响,而且反应中需要过量硼烷。硼烷R_3B中一般只有1～2个R基可以利用,反应产率以烯烃计算只有50％～65％,我们进行含酯末端烯烃的硼氢化碘化时,发现在强碱性醇钠条件     

Reactive sulfur species: kinetics and mechanisms of the reaction of cysteine thiosulfinate ester with cysteine to give cysteine sulfenic acid

The kinetics and mechanisms of the reaction of cysteine with cysteine thiosulfinate ester in aqueous solution have been studied by stopped-flow spectrophotometry between pH 6 and 14. Two reaction pathways were observed for pH > 12: (1) an essentially pH-independent nucleophilic attack of cysteinate on cysteine thiosulfinate ester, and (2) a pH-dependent fast equilibrium protonation of cysteine sulfenate that is followed by rate-limiting comproportionation of cysteine sulfenic acid with cysteinate to give cystine. For 6 < pH < 12, the rate-determining reaction between cysteinate and cysteine thiosulfinate ester becomes pH-dependent due to the protonation of their amine groups. Hydrolysis of cysteine thiosulfinate ester does not play a role in the aforementioned mechanisms because the rate-determining nucleophilic attack by hydroxide is relatively slow.     

Weakly coordinating group directed rhodium-catalyzed unconventional site-selective C-H olefination of indolizines at the 8-position

A rhodium-catalyzed directing group promoted selective C-H olefination reaction of indolizines at the 8-position is re ported.Di-olefination at 2,8-positions also achieved with silver hexafluoroantimonate as an additive under similar reaction conditions.Weakly coordinating groups,such as ketone,alde hyde,amide and ester,were used as directing groups.The ester group can be removed under acid conditions and therefore is used as a traceless directing group.     

Reactions of trifluoroacetic acid with poly(vinyl alcohol) and its model compounds. Effect of neighboring hydroxyl groups on the reaction

Reactions of trifluoroacetic acid with poly(vinyl alcohol) and various model alcohols were investigated by observing the fluorine and the proton magnetic resonance spectra of the reaction mixtures. At equilibrium the degree of conversion to ester under given conditions decreased in the order isopropanol, pentane-2,4-diol, heptane-2,4,6-triol and poly(vinyl alcohol). Therefore the equilibrium constant for esterfication of a hydroxyl group is depressed by the presence of neighboring hydroxyl groups. It was observed that the steric structures of the models and polymers also affect the equilibrium position of the reaction and this is mainly ascribable to the fact that meso (isotactic) molecules react more slowly with the acid than do racemic (syndiotactic) molecules. In acid-catalyzed acetylation of the model alcohols with acetic acid no similar dependence on the steric configuration was found. Therefore trifluoroacetylation seems to be specific in this respect.     

Oligomers of a polyester network

Oligomers of glycerol and succinic acid have been prepared by three different methods and characterised by solution ¹³C-NMR spectroscopy at 125.8 MHz. The first series of five oligomers was prepared by reacting glycerol with succinic anhydride; only one acid function of each succinic acid residue formed an ester by this means. They were readily distinguished as the shifts of their glycerol residues were dispersed over 16 ppm, and their shifts provided a guide to the assignment of shifts in the more elaborate oligomers. The second set of oligomers was prepared by treating glycerol with a small quantity of succinic acid, ester links being promoted by means of the reagent dicyclohexylcarbodiimide (DCCDI). When we used 2 mol of DCCDI/mol of acid in the presence of an excess of glycerol, no free acid functions remained, and a new set of oligomers was obtained. Furthermore, within this set the proportion of ring molecules was enhanced by repeating the reaction under much more dilute conditions. In this way the shifts of two ring oligomers were recognized in the spectrum. A different set of oligomers again was obtained when the esterification was performed with 1 mol of DCCDI/mol of succininic acid. After the first generation of oligomers had been identified in the mixtures produced by these three experiments, the reactions continued to produce larger oligomers with new fine structure features in the spectra. Glycerol trisuccinate was prepared in a pure form and heated in a vacuum to eliminate succinic acid groups and allow the formation of oligomers with two and three branch points. The structures successively produced by this reaction were readily recognized. In all we were able to recognize the formation of component structures in at least 17 different oligomers. The shifts of the carbons of the glycerol residues are sensitive to the substitution pattern at that residue, to whether the succinic acid residue to which they are linked has reacted a second time, and in some cases the methine shift is sensitive to how the succinic acid residue attached to a neighboring methylene carbon has reacted. © 1994 John Wiley & Sons, Inc.     

Synthesis,characterization, and hydrazine sensing property of two covalent organic frameworks

Sensitive and efficient detection of hydrazine is of great significance because hydrazine is a highly toxic organic molecule, which can pose great threats to human health. Herein, two covalent organic frameworks (COFs) modified with ester groups in the pores, TAPB-DHE and TAPT-DHE, have been successfully synthesized via esterification reaction. Both of the two COFs have good crystallinity, thermal stability, and fluorescence properties. TAPB-DHE can be used as a turn-on fluorescence sensor for the sensitive detection of trace hydrazine in aqueous solution with a detection limit of 0.40 μM and a wide linear range of 0–100 μM due to the fluorescence enhancement of TAPB-DHE caused by the chemical reaction between hydrazine and TAPB-DHE, in which the ester group of the COF is converted into hydroxyl group, leading to the restriction of the intramolecular charge transfer (ICT) effect. This work provides a reference for the design of COFs with hydrazine recognition function and a helpful expansion for the practical application of COFs.     

TFAA chemical derivatization and XPS. Analysis of OH and NHx polymers

The determination of functional groups on complex polymer surfaces by X‐ray photoelectron spectroscopy (XPS) can be improved considerably by derivatization reactions. Simple polymers containing hydroxyl groups or amino groups were investigated as reference materials for the derivatization with trifluoroacetic anhydride (TFAA). ‐1 Poly(vinyl alcohol) (PVA), poly(hydroxyethyl methacrylate) (PHEMA), poly(vinyl butyral) (PVB), poly(allylamine) (PAAm), and poly(diallyl amine) (PDAAm) were derivatized using TFAA and analyzed with XPS. Polyethylene (PE) was used as an independent external reference for the binding energy (BE). Applying this procedure, the BE scales of all measurements were referenced to the carbon atoms of PE. It was found that the BE of the CF₃ component in the C1s region is different when bonded as an acetate or as an amide. The CF₃ BE is also influenced by the density of these groups in the polymer molecule. In TFAA‐PVA, where every second main chain carbon atom carries a trifluoroacetate (TFAc) group, the BE is 294.3 eV while in TFAA‐PVB with only isolated groups, the BE is 293.6 eV. The BE of the CF₃ component in the trifluoroacetamides (TFAAms) prepared from PAAm and PDAAm was found to be 292.5 and 292.3 eV, respectively. Compared with the analog fluorine free compounds, the BE is shifted toward higher values also for the ester carbon atom, the amide carbon atom, and the carbon atom to which the ester or amide is bonded. The data suggest that the gas phase reaction of TFAA with a polymer surface is diffusion limited. The actual ester or amide formation is a fast reaction and runs as a wave into the surface. Copyright © 2009 John Wiley & Sons, Ltd.     

Mechanism of activation of hydroxyl-containing polymers with N-hydroxysuccinimide and carbodiimides: Reason for leakage

The carbodiimide-mediated reaction of N-hydroxysuccinimide with carboxyl groups immobilized to hydroxyl-containing polymers (such as Sepharose or Trisacryl) leads to N-hydroxysuccinimide ester and N-hydroxysuccinimide derivatives of β-alanine which react subsequently with the hydroxyl group of the polymer via ester and carbamate bonds. These derivatives are formed upon interaction of dicyclohexyl carbodiimide with three equivalents of N-hydroxysuccinimide followed by a Lossen rearrangement. The amount of β-alanine thus coupled is very high compared to the number of carboxyl groups present on the resin. The β-alanine bound through the ester bond comprises about 90% of the β-alanine bound. Alkaline treatment of the ester bonded β-alanine containing polymers (prior to coupling of amino-containing ligands) causes a rearrangement yielding β-alanine with a free carboxyl group coupled through a stable carbamate linkage. After coupling of amino-containing ligands, the above-described rearrangement cannot occur, and the β-alanine-linked ligand leaks from the polymer via hydrolysis of the ester bond. The newly formed carboxyl groups (derived from the rearrangement) can be used to prepare active esters (e.g. nitrophenyl). Upon coupling with amino-containing ligands, these esters yield resins bearing chemically stable bonds.     

基于“点击反应”的官能化环酯单体的合成及聚酯性能研究进展

聚酯高分子材料在医药生物材料领域有很广泛的应用,尤其是可作为药物缓释材料应用在人体当中。作为药物缓释材料的聚酯,需要具有较多的修饰位点,便于药物分子或其它小分子的键合。为了能够简便地、高效地将小分子键合到聚酯链上,可采用目前热门的"点击反应"进行小分子键合,这就需要将涉及"点击反应"的官能团引入到聚酯链上。由于采用合成聚酯的方法多为开环聚合反应,就需制备出双键和叁键官能化环酯类单体,便于以开环聚合方法制备官能化聚酯。本文综述了近年来基于"点击反应"而合成的官能化环酯类单体,将酯类单体分为三类进行了合成方法的详细介绍,重点归纳了所得到的官能化聚酯的聚合结果及其所键合的分子,阐述了官能化聚酯所具有的新性质,最后对这类聚酯材料的应用前景做了展望。