Stereoregular polyamides entirely based on tartaric acid

Two new stereoregular polyamides, namely PTA‐LL and PTA‐LD, derived from (2S,3S)‐(−)‐2,3‐dimethoxy‐1,4‐butanediamine and (2R,3R)‐(+)‐ or (2S,3S)‐(−)‐2,3‐dimethoxybutanedioic acid are described. The two diastereoisomeric polymers contain two pairs of stereocenters in the main chain of the repeating unit, one in the diamine and the other in the diacid counterpart. L and D refer to the configuration of the tartaric acid unit from which they proceed. These polyamides were prepared by polycondensation in solution and were fully characterized by elemental analysis, DSC, and IR/NMR spectroscopies. Number average molecular weights around 30,000 were estimated by GPC and viscosimetry. Both compounds are soluble in water and display large optical activity. CD and ¹H‐NMR measurements in chloroform solution suggested the presence of definite secondary structures in this solvent. Solid samples were found to crystallize upon annealing and the crystal structure of both polyamides was investigated by X‐ray diffraction. PTA‐LL crystallized in an orthorhombic lattice in the space group P22₁2₁ whereas PTA‐LD seemed to adopt a P1 triclinic structure. In both cases the polymer chain appears to be in a folded conformation more contracted than in the common γ‐form of conventional nylons. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 983–993, 1999     

Synthesis and characterization of optically active polyamides derived from carbohydrate-based monomers

The synthesis of three new stereoregular AB-type polyamides based on D -ribono-1,4-lactone, L -arabinose, and D -xylose has been carried out by the active ester polycondensation method. These polyamides were characterized by elemental analysis, IR and NMR spectroscopies, and powder X-ray diffraction. They displayed optical activity and had a pronounced affinity to water, although they were not soluble in this solvent. The polyamide obtained from D -ribono-1,4-lactone was highly crystalline and yielded films with spherulitic texture. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3645–3653, 1997     

Synthesis of stereoregular polygluconamides from D-glucose and D-glucosamine

Two stereoregular polygluconamides, one ( 3 ) of polypeptide-type and the other ( 16 ) being a polycaproamide containing four stereocenters in the main chain of the repeating unit, have been prepared from D-glucosamine and D-glucose, respectively. The new polyamides were characterized by elemental analysis, and IR, ¹H- and ¹³C-NMR spectroscopies. The molecular weights for 3 and 16 were estimated as 25,000 and 67,000, respectively, on the basis of viscosimetric measurements. Both polyamides display high optical activity; they are highly hydrophilic and readily soluble in water as well as in a variety of organic solvents including chloroform. Polyamide 16 is highly crystalline and yields resistant films with spherulitic texture. © 1995 John Wiley & Sons, Inc.     

Synthesis and characterization of chiral polyamides derived from glycine and (S)-5-amino-4-methoxypentanoic acid

Stereoregular, enantiomerically pure, chiral polyamides of the –AB– type, containing a natural (glycine) and a synthetic [(S)-5-amino-4-methoxypentanoic acid (AMP)] component have been prepared by the active ester polycondensation method. Thus, polyamide 7 was obtained by polycondensation of the conveniently activated H₂NGly–AMPCO₂R unit ( 6 ). In this reaction, 7 appeared accompanied by a considerable amount of cyclic (Gly–AMP)₂ ( 8 ), which makes the isolation and purification of 7 difficult. The formation of cyclic byproducts could be avoided by preparing and polymerizing the oligoamide H₂NGly–AMP–AMPCO₂R ( 11 ), which has the terminal carboxyl group activated as the pentachlorophenyl ester. The resulting polyamide ( 12 ) was obtained in 85% yield and free of macrolactams, such as 8 . The new polyamides 7 and 12 were characterized by elemental analysis and infrared and ¹H- and ¹³C-nuclear magnetic resonance spectroscopies. Thermal studies revealed that 12 is crystalline and yields films with spherulitic texture by slow evaporation of formic acid solutions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2741–2748, 1998     

Spherulites from polyamides with a structure characterized by three hydrogen‐bond directions

Polyamides constituted by glycine residues have a peculiar structure characterized by the establishment of intermolecular hydrogen bonds along three different directions. Spherulites of polyglycine and nylons 2/3, 2/3/3, 2/6, and 2/11 have been obtained from evaporation of concentrated solutions or from the molten state. In all cases, a negative birefringence was detected. This fact differs from the observations on spherulites of conventional nylons where intermolecular hydrogen bonds are formed along a single direction and sheet structures are postulated. Polarizing light, scanning electron, and transmission electron microscopy showed that banded spherulites are usually formed in the crystallization of nylons 2/n. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1719–1726, 2002     

Aromatic polyamides derived from unsymmetrical diamines containing the phthalazinone moiety

Two unsymmetrical and kink non‐coplanar heterocyclic diamines, 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)phenyl](2H)phthalazin‐1‐one and 1,2‐dihydro‐2‐(4‐aminophenyl)‐4‐[4‐(4‐aminophenoxy)‐3,5‐dimethylphenyl](2H) phthalazin‐1‐one, were successfully synthesized by readily available heterocyclic bisphenol‐like monomers through two steps in high yields. A series of novel poly(arylene ether amides)s containing the phthalazinone moiety with inherent viscosities of 1.16–1.67 dL/g were prepared by the direct polymerization of novel diamines and aromatic dicarboxylic acids using triphenyl phosphite and pyridine as condensing agents. The polymers were readily soluble in a variety of solvents such as N,N‐dimethylformamide, N,N‐dimethylacctamide, dimethyl sulfoxide, N‐methyl‐2‐pyrrolidone, and even in pyridine, chloroform and m‐cresol. The glass‐transition temperatures were in the range of 291–329 °C, and the temperatures for 5% weight loss in nitrogen were above 490 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3489–3496, 2002     

Synthesis of polybenzodipyrrolediones by thermal cyclodehydration of polyamides derived from dibenzylidenebenzodifurandiones and aliphatic diamines

A new class of polyheterocycles, polybenzodipyrrolediones (PBP), has been synthesized successfully by the two-step polymerization of dibenzylidenebenzodifurandiones with aliphatic diamines. New bislactone monomers, 3,5-dibenzylidene-3,5-dihydro-1H,7H-benzo[1,2-c:4,5-c′]difuran-1,7-dione and 3,7-dibenzylidene-3,7-dihydro-1H,5H-benzo[1,2-c:4,5-c′]-difuran-1,5-dione, were synthesized from pyromellitic dianhydride and phenylacetic acid. The ring-opening polyaddition reaction of the bislactones with aliphatic diamines in a polar solvent afforded novel polyamides having inherent viscosities of 0.1–1.0 in quantitative yield. The solution polymerization was almost completed within several hours at 80°C, while it required approximately a week to its completion at room temperature. Dimethyl sulfoxide and N-methyl-2-pyrrolidone were preferred solvents for the polymerization. The open-chain polyamides were subsequently cyclodehydrated by heating at 240°C to give PBP having high molecular weight. The aliphatic PBP were soluble in hot polar solvents such as N-methyl-2-pyrrolidone, m-cresol, and nitrobenzene. They began to decompose at about 400°C in a nitrogen atmosphere as determined by thermogravimetric analysis.     

Synthesis and properties of polyamides from 2,5-furandicarboxylic acid and aromatic and aliphatic diamines

Russian Chemical Bulletin - Polyamides based on the 5-hydroxymethylfurfural derivative (2,5-furandicarboxylic acid dichloroanhydride) and diamines of both aromatic and aliphatic series were...     

Hydrogen bonding,mobility, and structural transitions in aliphatic polyamides

Some salient results in nylon research are reviewed to identify the fundamental principles that are applicable to other strongly interacting or hydrogen‐bonded polymers, including proteins. The effects of hydrogen bonds on stress‐, heat‐, and solvent‐induced changes in macroscopic properties are discussed. These data provide a window into the chain mobility and linkages between the crystalline and amorphous domains, both of which are important for any predictive model. The changes in the characteristics of the amorphous phase with the crystallinity and orientation require that it be modeled with at least two components: a rigid/immobile/anisotropic component and a soft/mobile/isotropic component. The deformation and shrinkage behavior of these polymers are discussed in terms of the relative contributions of the amorphous and crystalline domains and of the interactions between them. The premelting crystalline transition is accompanied by the merging of intersheet and intrasheet diffraction peaks in some nylons, as observed by Brill, and not in others even though the underlying mechanism that gives rise to these transitions, the onset of volume‐increasing librational motion of the crystalline stems, is the same. Because the effects of the temperature, deformation, and solvent have a common origin associated with mobility, a fictive temperature can be associated with a given solvent activity or stress level. The magnitude of this fictive temperature is the amount by which the glass or Brill transition temperature is reduced in the presence of solvents (～50 °C) or stress or by which the annealing temperature can be reduced in the presence of a solvent (or active stress) to achieve the same structural state as that of a dry (or static) polymer. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1763–1782, 2006     

Synthesis of polyamides from pseudo dibenzoylphthaloyl chlorides and aliphatic diamines

New pseudo dibenzoylphthaloyl chlorides, namely, 2,5-dibenzoylterephthaloyl, 4,6-dibenzoylisophthaloyl, and 4,6-di(p-toluyl)isophthaloyl chlorides, were synthesized as monomers. The ring-opening polyaddition reaction of the pseudo dibenzoylphthaloyl chlorides with aliphatic diamines in N-methyl-2-pyrrolidone afforded a new class of polyamides having inherent viscosities of 0.2 ～ 0.6 in quantitative yield. The solution polymerization was almost completed within 30 min at room temperature. All of the polyamides were soluble in a wide range of solvents including tetrahydrofuran. These polymers began to decompose at around 300°C both in air and under nitrogen as determined by differential thermal analysis (DTA) and thermogravimetric analysis (TGA).     

pH and reduction sensitive bio-based polyamides derived from renewable dicarboxylic acid monomers and cystine amino acid

New reduction biodegradable and pH-sensitive linear nonpeptidic polyamides were synthesized by interfacial polycondensation of diamines and cystine amino acid with dicarbonyl dichlorides derived from renewable dicarboxylic acids. The polymer degradability by glutathione is enhanced by the introduction of disulfide linkages, and the response to pH change is enhanced by introducing pendant carboxylic acid functions. The results of pH sensitivity tests indicated that protonation–deprotonation of the carboxylic acid group at about pH of 4.1 with cation exchange capacity 4.5?meq?g^?1 and the disulfide bonds in polyamides were effectively cleaved.     

Review: Auto-oxidation of aliphatic polyamides

The literature on oxidation kinetics of polyamides and model compounds has been reviewed in order to try to extract suitable information for non-empirical kinetic modeling. Polyamide characteristics are systematically compared to polyolefin ones, these latter being more extensively studied. From kinetic analysis point of view, it is shown that oxidation attacks predominantly α amino methylenes of which C–H bond is considerably weaker than the other methylenes. As a result, propagation by H abstraction is considerably faster in polyamides than in polyethylene for instance. Termination by radical combination is also very fast. Another cause of PA oxidizability is the instability of α amino hydroperoxides linked to the inductive effect of nitrogen. This instability is responsible for many key features of oxidation kinetics especially the absence of induction period.     

Cyclizations in hyperbranched aliphatic polyesters and polyamides

Hyperbranched aliphatic polyesters of 2,2′-bis-(hydroxymethyl) propanoic acid and hyperbranched aliphatic polyamides obtained from new carboxy- and amino-functionalized caprolactams were studied by NMR spectroscopy and MALDI-TOF mass spectrometry. Ring-chain equilibria taking place through intramolecular hydroxy-ester, carboxy-amide or amine-amide interchanges and leading to the formation of cyclic branches or end-groups were found to exert a predominant influence on the molar mass of these hyperbranched polymers. A number of intra- or intermolecular side reactions, such as the formation of ethers in polyesters and the formation of anhydrides, imides, amidines and secondary amines in polyamides were also detected and resulted in polymer crosslinking on prolonged heating. The existence of such ring-chain equilibria and side-reactions make the control of hyperbranched polymer structure much more difficult than generally accepted.     

Preparation and properties of aromatic polyamides from 1,4-bis(p-carboxyphenoxy)naphthyl and aromatic diamines

A new aromatic dicarboxylic acid, 1,4-bis (p-carboxyphenoxy)naphthyl ( 3 ), was synthesized by the reaction of p-fluorobenzonitrile with 1,4-naphthalenediol, followed by hydrolysis. Aromatic polyamides having inherent viscosities of 1.27–2.22 dL/g were prepared by the triphenyl phosphite activated polycondensation of diacid 3 with various aromatic diamines. Most of the resulting polymers showed an amorphous nature and were readily soluble in a variety of organic solvents including N,N-dimethyl-acetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and m-cresol. Transparent, tough, and flexible films of these polymers could be cast from the DMAc or NMP solutions. The cast films had tensile strengths ranging from 64–104 MPa, elongations-at-break from 6 to 10%, and initial moduli from 1.52 to 2.14 GPa. These polyamides had glass transition temperatures in the range of 195 to 240°C. Almost all polymers were thermally stable up to 400°C, with 10% weight loss being recorded above 480°C in air and nitrogen atmospheres. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2273–2280, 1997     

Synthesis of polyamides from diols and diamines with liberation of H2

The amidation reaction based on catalytic coupling of alcohols with amines previously reported by us, using the pincer complexes 1 and 2 as catalysts, was applied to the generation of polyamides from nonactivated diols and diamines. A range of polymers was prepared, with M_n up to 26.9 kDa. Unlike the traditional syntheses of polyamides based on carboxylic acid derivatives, which require the use of toxic reagents and generate stoichiometric amounts of waste, this process generates only molecular hydrogen as byproduct. Both aromatic and aliphatic diols and diamines were used. Gel permeation chromatography measurements of the dimethylformamide‐soluble polymers and thermal studies of the polyamides were performed. Matrix assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) spectra are also reported. Thermogravimetric analyses studies indicate that the aromatic polyamides (with the exception of the pyridine‐based polyamide) are more thermally stable than the aliphatic ones. This general, environmentally benign method for the synthesis of polyamides is homogeneously catalyzed under neutral conditions by dearomatized ruthenium‐pincer complexes 1 and 2 and proceeds in 1,4‐dioxane under an inert atmosphere. Conditions for polyamidation in the absence of solvent are also reported, using the pincer complex 2 as catalyst. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of novel aromatic polyamides derived from two heterocyclic diamines

Two diamines were synthesized as new aromatic monomers. A series of novel aromatic polyamides (aramids) were also synthesized by direct and indirect polycondensation of these diamines with various aromatic dicarboxylic acids. These aramids have inherent viscosities of 0.43-0.84 dl/g and were obtained in quantitative yield.     

Chiral polyamides consisting of N‐α‐benzoyl‐L‐glutamic acid as a diacid component

Novel polyamide with chiral environment was obtained from aromatic diamine, 4,4′‐diaminodiphenylmethane (DADPM), and N‐α‐protected L ‐glutamic acid, N‐α‐benzoyl‐L ‐glutamic acid (Benzoyl‐L ‐Glu‐OH). The optical rotation ([α]_D ) of the polyamide was determined to be 3.6° (c = 1.00 g/dL in DMF), implying that the optically active polyamide was obtained. The present polyamide gave a durable self‐standing membrane. The membrane selectively incorporated the D ‐isomer of Ac‐Trp from racemic mixture of Ac‐Trp. The adsorption selectivity toward Ac‐D ‐Trp was determined to be 1.95. It showed chiral separation ability by adopting potential difference as a driving force for membrane transport. The permselectivity was dependent on the potential difference, and at the applied potential difference of 3.0 V, the membrane selectively transported Ac‐D ‐Trp and the permselectivity toward Ac‐D ‐Trp was determined to be 1.84, which was close to the adsorption selectivity of 1.95. Contrary to this, the membrane showed opposite permselectivity at the applied potential difference of 2.0 V and the permselectivity toward the L ‐isomer reached 2.48. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2530–2538, 2009     

NMR studies and conformations of asymmetric polyamides derived from cyclopropyl diacids and diamines

The synthesis and optical properties of the polyamides [poly(C3A˙C3B) and poly(C3A-C3MB)] derived from asymmetric trans-1,2-cyclopropanedicarboxylic acids (C3A), asymmetric trans-1,2-diaminocyclopropanes (C3B), and asymmetric trans-1,2-bis(methylamino) cyclopropanes (C3MB) were reported in the preceding article. This paper describes the NMR studies and conformations of the polyamides. The NMR studies of the polyamides and their diamide models have suggested that the polyamides have about a 90° torsional angle for NH (or CH₃) CH. This angle seems to be reasonable because of less steric interaction, especially for poly(+)C3A(+)C3MB. The N? CH₃ of the poly(+)C3A(+)C3MB in sulfuric acid-d₂ (D₂SO₄) is a singlet and is tentatively assigned to trans to the carbonyl oxygen of the amide group. In 2,2,2-trifluoroethanol-d₃ (TFE-d₃) and chloroform-d (CDCl₃) it is also a singlet and is tentatively assigned to cis. The overall results obtained suggest that poly(+)C3A(+)C3MB exists in a compact helical conformation in TFE and TMS, while some conformational transition to a highly extended helical form with opposite handedness is induced by the addition of MSA. Likewise, poly(+)C3A(+)C3B must exist in some ordered conformation in the solvents studied. Possible ordered conformations of the polyamides have been proposed based on the experimental results and some assumptions.     

Synthesis and optical properties of asymmetric polyamides derived from cyclopropyl diacids and diamines

The polyamides were prepared from the dicarbonyl chloride of (+) (S)- or (?)(R)-trans-1,2-cyclopropanedicarboxylic acid (C3A) with either the dihydrochloride salt of (+)(S)- or (?)(R)-trans-1,2-diaminocyclopropane (C3B) or the dihydrobromide salt of (+)(S)- or (?)(R)-trans-1,2-bis(methylamino)cyclopropane (C3MB) by interfacial polycondensation. Several diamide model compounds composed of these monomers were also synthesized. The polyamides [poly(C3A-C3B)] derived from C3A and C3B have the capability of hydrogen bonding, while the polyamides [poly-(C3A-C3MB)] derived from C3A and C3MB do not. Poly(C3A-C3B) were insoluble in common organic solvents except strong acids. Poly(C3A-C3MB) were soluble in common organic solvents. Poly(C3A-C3B) had melting points higher than 300°C. Poly(C3A-C3MB) melted at 180–235°C. The ORD and CD study has shown that poly(+)C3A(+)C3B in methane sulfonic acid (MSA), 2,2,2-trifluoroethanol (TFE) (5 v % MSA), and tetramethylenesulfone (TMS) (5 v % MSA) exhibits a very strong Cotton effect or CD peak at 212–218 mμ, attributable to a component of the split π–π^* transition of the amide chromophores. Poly(+)C3A(+)C3MB in MSA and TFE (5 v % MSA) shows a strong Cotton effect or CD peak at 217–223 mμ and an intermediate Cotton effect or CD trough at 202–204 mμ as well as an intermediate Cotton effect or CD trough at 220–222 mμ and an intermediate Cotton effect or CD peak at 202–204 mμ in TFE and TMS. These peaks and troughs may be assigned to splitting of the π–π^* transition. The CD spectra of poly(+)C3A(+)C3MB in nonacidic media are quite different from those in acidic media: they are almost mirror images. The CD spectra in this transition induced by MSA suggests that a transition from a compact helix to another more extended helix with opposite handedness occurs similar to poly-L-proline I ? II. This transition may be explained by electrostatic repulsion between protonated amide groups. Viscosity data have shown that the conformation is changed to a highly extended from in acidic media. The polyamides and diamides derived from enantiomers exhibit mirror image spectra. Poly(+)C3A(+)C3B and poly(+)C3A(+)C3MB in every solvent studied exhibit a marked enhancement of the rotatory strength of ORD and CD with respect to the corresponding diamide models.