Synthesis and characterization of biodegradable poly(L-aspartic acid-co-PEG)

The melt polycondensation reaction of the prepolymer prepared from N-(benzyloxycarbonyl)-L -aspartic acid anhydride (N-CBz-L -aspartic acid anhydride) and low molecular weight poly(ethylene glycol) (PEG) using titanium isopropoxide (TIP) as a catalyst produced the new biodegradable poly(L -aspartic acid-co-PEG). This new copolymer had pendant amine functional groups along the polymer backbone chain. The optimal reaction conditions for the preparation of the prepolymer were obtained by using a 0.12 mol % of p-toluenesulfonic acid with PEG 200 for 48 h. The weight-average molecular weight of the prepolymer increased from 1,290 to 31,700 upon melt polycondensation for 6 h at 130°C under vacuum using 0.5 wt % TIP as a catalyst. The synthesized monomer, prepolymer, and copolymer were characterized by FTIR, ¹H- and ¹³C-NMR, and UV spectrophotometers. Thermal properties of the prepolymer and the protected copolymer were measured by DSC. The glass transition temperature (T_g) of the prepolymer shifted to a significantly higher temperature with increasing molecular weight via melt polycondensation reaction, and no melting temperature was observed. The in vitro hydrolytic degradation of these poly(L -aspartic acid-co-PEG) was measured in terms of molecular weight loss at different times and pHs at 37°C. This pH-dependent molecular weight loss was due to a simple hydrolysis of the backbone ester linkages and was characterized by more rapid rates of hydrolysis at an alkaline pH. These new biodegradable poly(L -aspartic acid-co-PEG)s may have potential applications in the biomedical field. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2949–2959, 1998     

Preparation and characterization of poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L‐lactide) polymer nanoparticles

A poly(D,L ‐lactide)–bromine macroinitiator was synthesized for use in the preparation of a novel biocompatible polymer. This amphiphilic diblock copolymer consisted of biodegradable poly(D,L ‐lactide) and 2‐methacryloyloxyethyl phosphorylcholine and was formed by atom transfer radical polymerization. Polymeric nanoparticles were prepared by a dialysis process in a select solvent. The shape and structure of the polymeric nanoparticles were determined by ¹H NMR, atomic force microscopy, and ζ‐potential measurements. The results of cytotoxicity tests showed the good cytocompatibility of the lipid‐like diblock copolymer poly(2‐methacryloyloxyethyl phosphorylcholine)‐block‐poly(D,L ‐lactide). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 688–698, 2007     

Synthesis,hydrophilicity, and oxygen permeability of poly[(trimethylsilyl)propyne]-gr-poly(N,N-dimethylacrylamide)

N,N-dimethylacrylamide (DMAA) was graft copolymerized on poly[(trimethylsilyl)propyne] (PTMSP) by single electron reduction of PTMSP with potassium naphthalenide (K-Naph), followed by anion polymerization of DMAA from the carbanion formed in the reduction. A hard and practically non-water-swelling PTMSP-gr-poly(DMAA) was obtained under the conditions using controlled amount of K-Naph and DMAA. The graft copolymer was characterized with regard to structure, number-averaged molecular weight, and the amount of grafting poly(DMAA) determined by the relative absorbance of the IR absorption band assigned to the CO and SiC H functionalities (A_CO/A_{SiC H}). The oxygen permeability and water contact angle (θ) of the graft copolymer were evaluated while varying the amount of grafting poly(DMAA). The graft copolymer proved to be highly oxygen permeable (165 Barrers) and hydrophilic (θ = 27°). Its transparency was also elucidated with UV–vis spectra. This graft copolymer was proposed as a promising candidate for use as a hard contact lens material. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 603–610, 1998     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐ 4‐yl)methyl methacrylate‐co‐styrene] by addition reaction of carbon dioxide and its compatibility with poly(methyl methacrylate) or poly(vinyl chloride)

We investigated the chemical fixation of carbon dioxide (CO ₂) to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer to polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl)methyl methacrylate‐co‐styrene] [poly(DOMA‐co‐St)] from the addition of CO ₂ to poly(glycidyl methacrylate‐co‐styrene) [poly(GMA‐co‐St)], quaternary ammonium salts showed good catalytic activity at mild reaction conditions. The CO ₂ addition reaction followed pseudo first‐order kinetics with the concentration of poly(GMA‐co‐St). In order to expand the applications of the CO ₂ fixed copolymer, polymer blends of this copolymer with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) were cast from N,N′‐dimethylformamide (DMF) solution. Miscibility of blends of poly(DOMA‐co‐St) with PMMA or PVC have been investigated both by differential scanning calorimetry (DSC) and visual inspection of the blends, and the blends were miscible over the whole composition ranges. The miscibility behaviors were also discussed in terms of FT‐IR spectra. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis,characterization, and blends of high temperature poly(arylether sulfone)s

The preparation of poly(4-oxy-1,4-phenylenesulfonyl-4,4′-biphenylene-4-sulfonylphenylene) (PBP) has been accomplished by the base mediated, polycondensation reaction between two biphenyl containing monomers. The bisphenol, 4,4′-bis[(4-hydroxyphenyl) sulfonyl]biphenyl (HSB), was reacted with 4,4′-bis[(4-chlorophenyl)sulfonyl]-biphenyl (CSB) in tetramethylene sulfone solvent. The highest mechanical properties and glass transition temperature was observed for polymer PBP with a reduced viscosity around 1.0 dL/g. Consequently, the current synthesis route provides polymer with higher properties than other historical preparative routes. Blends of PBP with a different poly(ether sulfone) were miscible based on the observance of a single glass transition temperature. The T_gs of the polymer blends exhibited an unusual positive deviation from the weighted linear averages of the components.     

Grafting by in situ coupling of epoxy groups of a living copolymer with an anionic living polymer

A tetrahydrofuran (THF) solution of the living random copolymer of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) was prepared by the living anionic copolymerization of the two monomers, using 1,1‐diphenylhexyllithium (DPHLi) as initiator, in the presence of LiCl ([LiCl]/[DPHLi]₀ = 3), at −50°C. The copolymer thus obtained has a controlled composition and molecular weight and a narrow molecular weight distribution. By introduction of an anionic living polystyrene (poly(St)) or anionic living polyisoprene (poly(Is)) solution into the above system at −30°C, a coupling reaction took place and a graft copolymer with a polar backbone and nonpolar side chains was produced. The solvent used in the preparation of the living poly(St) or poly(Is) affects the coupling reaction. When benzene was the solvent, a graft copolymer of high purity, controlled graft number and molecular weight, and narrow molecular weight distribution (M_w/M_n = 1.11–1.21) was obtained. In the coupling reaction, the living poly(St) reacted only with the epoxy groups and not with the carbonyls of the backbone polymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 105–112, 1999     

From Sergeants and Soldiers to Chiral Conflict Effects in Helical Polymers by Acting on the Conformational Composition of the Comonomers

Different communication mechanisms can be switched within a copolymer by acting on the conformational composition of the components and their chirality. Thus, a sergeant and soldiers effect is produced in two diastereomeric copolymer series, poly[(S)- 1 _r-co-(S)- 2 _(1−r)] and poly[(R)- 1 _r-co-(S)- 2 _(1−r)], owing to the presence in chloroform of a preferred conformation in (S)- 2 , and a conformational equilibrium in 1 , where a P helix is induced independently of the absolute configuration of the soldier. In THF, the presence of a conformational equilibrium at the pendants of the two components produces a reciprocal chiral enhancement effect by copolymerization of the two monomers, while in DMF, a third chiral to chiral communication switch is produced due to the presence of a single conformer at the pendant group of the two components. In such a case, a chiral conflict or chiral accord effect is produced depending if the two components induce the same or the opposite helical sense.     

Homogeneous graft copolymerization and characterization of novel artificial glycoprotein: Chitosan‐poly(L‐tryptophan) copolymers with secondary structural side chains

A novel series of artificial glycoprotein, peptide‐chitosan copolymers with secondary structural side chain have been synthesized by ring‐opening polymerization of L ‐tryptophan N‐carboxyanhydride under homogeneous conditions. Their chemical structures and polymerization degree (DP) were characterized by IR, ¹³C NMR, and XRD spectra. Distinctly secondary protein structure has been found in the poly‐L ‐tryptophan side chains of copolymers and with the lengthening of side chain (i.e., the increase of DP at the same time), its conformations could transfer from β‐sheet to α‐helix. The content of α‐helix reaches about 41% when DP of polytryptophan is 22. The solubility of graft copolymers in polar solvent strongly depends on the length of poly‐L ‐tryptophan side chains. Unique fluorescence emission at 360 nm has been observed in the glycopolymers and the intensity shows the positive‐correlation with the increasing of DP of polytryptophan. Importantly, the fluorescence effect can be quenched easily by the coordination with copper ions which provides the possibility on the biosensor design. In comparison with chitosan, glycopolymers also present impressively enhanced compressive strength and elastic modules when it is blended with epoxy E 44 to form epoxy‐copolymer hybrid resin. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 925–934, 2009     

Synthesis and properties of the ionomer diblock copolymer poly(4‐vinylbenzyl triethyl ammonium bromide)‐b‐polyisobutene

A new amphiphilic diblock copolymer containing an ionomer segment, poly[(4‐vinylbenzyl triethyl ammonium bromide)‐co‐(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)]‐b‐polyisobutene [poly(4‐VBTEAB)‐b‐PIB], was synthesized by the chemical modification of poly(4‐methylstyrene)‐b‐polyisobutene [poly(4‐MSt)‐b‐PIB]. First, the 4‐methylstyrene moiety in poly(4‐MSt)‐b‐PIB was brominated with azobisisobutyronitrile as an initiator at 60 °C in CCl₄, and then the highly reactive benzyl bromide groups were ionized by a reaction with triethylamine in a toluene/isopropyl alcohol (80/20 v/v) mixture at about 85 °C to produce the ionomer diblock copolymer poly(4‐VBTEAB)‐b‐PIB. The solubility of the ionomer block copolymer was quite different from that of the corresponding poly[(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)]‐b‐polyisobutene {poly[(4‐MSt)‐co‐(4‐BrMSt)]‐b‐PIB}. Transmission electron microscopy observations demonstrated that all three diblock copolymers had microphase‐separation structures in which polyisobutene (PIB) domains existed in the continuous phase of the poly(4‐methylstyrene) segment or its derivative segment matrix. Dynamic mechanical thermal analysis measurements showed that poly[(4‐MSt)‐co‐(4‐BrMSt)]‐b‐PIB had two glass‐transition temperatures (T_g's), ?56 °C for the PIB segment and 62 °C for the poly[(4‐MSt)‐co‐(4‐BrMSt)] domain, whereas poly(4‐VBTEAB)‐b‐PIB showed one T_g at ?8 °C of the PIB domain; T_g of the poly[(4‐vinylbenzyl triethyl ammonium bromide)‐co‐(4‐methylstyrene)‐co‐(4‐bromomethylstyrene)] domain was not observable because of the strong ionic interactions resulting in a higher T_g and a retention of modulus up to 124 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2755–2764, 2003     

Synthesis of poly(L‐lysine)‐graft‐polyesters through Michael addition and their self‐assemblies in aqueous solutions

A series of poly(L ‐lysine)s grafted with aliphatic polyesters, poly(L ‐lysine)‐graft‐poly(L ‐lactide) (PLy‐g‐PLLA) and poly(L ‐lysine)‐graft‐poly(?‐caprolactone) (PLy‐ g‐PCL), were synthesized through the Michael addition of poly(L ‐lysine) and maleimido‐terminated poly(L ‐lactide) or poly(?‐caprolactone). The graft density of the polyesters could be adjusted by the variation of the feed ratio of poly(L ‐lysine) to the maleimido‐terminated polyesters. IR spectra of PLy‐g‐PCL showed that the graft copolymers adopted an α‐helix conformation in the solid state. Differential scanning calorimetry measurements of the two kinds of graft copolymers indicated that the glass transition temperature of PLy‐g‐PLLA and the melting temperature of PLy‐g‐PCL increased with the increasing graft density of the polyesters on the backbone of poly(L ‐lysine). Circular dichroism analysis of PLy‐g‐PCL in water demonstrated that the graft copolymer existed in a random‐coil conformation at pH 6 and as an α‐helix at pH 9. In addition, PLy‐g‐PCL was found to form micelles to vesicles in an aqueous medium with the increasing graft density of poly(?‐caprolactone). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1889–1898, 2007     

Synthesis and characterization of a poly(GMA)‐graft‐poly(Z‐L‐lysine) graft copolymer with a rod‐like structure

This study applied the macromonomers and glycidyl methacrylate (GMA) to synthesize a series of the graft copolymers, poly(GMA)‐graft‐poly(Z‐L ‐lysine), and investigated the conformation of the graft copolymer. The graft copolymers were synthesized with different GMA monomer ratios (28 to 89%) and different degrees of polymerization (DP) (8 to 15) of the poly(Z‐L ‐lysine) side chain to analyze secondary structure relationships. Atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and both wide angle and small angle X‐ray scattering spectroscopy (WAXS, SAXS) were used to investigate the relationship between the microstructure and conformation of the graft copolymers and the different monomer ratios and side chain DP. In AFM images, n8‐G89 (the graft copolymer containing 89% GMA units and the macromonomer DP is 8) showed tiny and uniform rod‐like structures, and n14‐G43 (the graft copolymer containing 43% GMA units and the macromonomer DP is 14) showed uniform rod‐like structures. FTIR spectra of the graft copolymers showed that the variations of α‐helix and β‐sheet secondary structures in the graft copolymers relate to the monomer ratios of the graft copolymers. However, the X‐ray scattering patterns indicated that the graft copolymer conformations were mainly dependent on the poly(Z‐L ‐lysine) side chain length, and these results were completely in accordance with the AFM images. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4655–4669, 2009     

Para‐linked and meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s: Conformational changes and their effects on iron–sulfur protein detection

Four para‐linked or meta‐linked cationic water‐soluble fluorene‐containing poly(aryleneethynylene)s (PAEs) were synthesized to investigate the solvent‐induced π‐stacked self‐assembly. These PAE backbones are composed of fluorenylene and phenylene units, which are alternatively linked by ethynylene bonds. UV–vis absorption and photoluminescence spectra were used to study their conformational changes as solvent was gradually changed from MeOH to H₂O. In pure water, with gradually increased meta‐phenylene content (0, 50, and 100%), they underwent a gradual transition process of conformation from disordered aggregate structure to helix structure, which was not compactly folded. Moreover, the polymer with an ammonium‐functionalized side chain on the meta‐phenylene unit appeared to adopt a more incompact or extended helix conformation than the corresponding one without this side chain. Furthermore, the conformational changes of these cationic PAEs in H₂O were used to study their effects on biological detection. Rubredoxin (Rd), a type of anionic iron–sulfur‐based electron transfer protein, was chosen to act as biological analyte in the fluorescence quenching experiments of these polymers. Preliminary results suggest that they all exhibit amplified fluorescence quenching, and that the polymer with more features of helix conformation tends to be quenched by Rd more efficiently. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5424–5437, 2006     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Novel synthesis of biodegradable amphiphilic linear and star block copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol)

Biodegradable, amphiphilic, diblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol) (PCL‐b‐PEG), triblock poly(ε‐caprolactone)‐block‐poly(ethylene glycol)‐block‐poly(ε‐caprolactone) (PCL‐b‐PEG‐b‐PCL), and star shaped copolymers were synthesized by ring opening polymerization of ε‐caprolactone in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) or star poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. Polymerizations were carried out in toluene at room temperature to yield monomodal polymers of controlled molecular weight. The chemical structure of the copolymers was investigated by ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and DSC investigations. The effects of copolymer composition and molecular structure on the physical properties were investigated by GPC and DSC. For the same PCL chain length, the materials obtained in the case of linear copolymers are viscous whereas in the case of star copolymer solid materials are obtained with low T_g and T_m temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3975–3985, 2007     

Synthesis and characterization of poly(vinylcyclohexane) derivatives

Six nearly monodisperse substituted poly(styrene) homopolymers, poly(styrene) (PS), poly(2-methylstyrene) (P2MS), poly(3-methylstyrene) (P3MS), poly(4-methylstyrene) (P4MS), poly(tertiary-butylstyrene) (PtBS), and poly(α-methylstyrene) (FαMS) were anionically polymerized and subsequently saturated using heterogeneous hydrogenation techniques to poly(vinylcyclohexane) (PVCH), poly(2-methylvinylcyclohexane) (P2MVCH), poly(3-methylvinylcyclohexane) (P3MVCH), poly(4-methylvinylcyclohexane) (P4MVCH), and poly(tertiary-butylvinylcyclohexane) (PtBVCH), respectively. In each case, except PαMS, the materials were saturated to > 99% conversion with no chain degradation. PS hydrogenations required the addition of small amounts of tetrahydrofuran to the reaction solvent cyclohexane to enhance miscibility and eliminate large-scale chain degradation. Density gradient and differential scanning calorimetry (DSC) measurements were used to characterize the density and glass transition temperature, T_g, of the unsaturated and saturated polymers. Saturation reduces the density by 3% to 11% and changes T_g substantially. The greatest variation in T_g is obtained with the 3-methyl substituted species where a 63°C increase is observed, while the highest measured T_g is 186°C for P2MVCH. Small-angle neutron scattering (SANS) experiments on binary mixtures of hydrogenous and deuterium labeled PVCH derivatives provided a determination of bulk chain statistics. The statistical segment length is relatively insensitive to vinylcyclohexane ring substitution, except with P3MVCH where a 20% greater value is obtained. ©1995 John Wiley & Sons, Inc.     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] by incorporation of carbon dioxide into epoxide polymer and the miscibility behavior of its blends with poly(methyl methacrylate) or poly(vinyl chloride)

This study was related to the investigation of the chemical fixation of carbon dioxide to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer‐to‐polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl) methyl methacrylate‐co‐ethyl acrylate] [poly(DOMA‐co‐EA)] from poly(glycidyl methacrylate‐co‐ethyl acrylate) [poly(GMA‐co‐EA)] and CO₂, quaternary ammonium salts showed good catalytic activity. The films of poly(DOMA‐co‐EA) with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) blends were cast from N,N′‐dimethylformamide solution. The miscibility of the blends of poly(DOMA‐co‐EA) with PMMA or PVC have been investigated both by DSC and visual inspection of the blends. The optical clarity test and DSC analysis showed that poly(DOMA‐co‐EA) containing blends were miscible over the whole composition range. The miscibility behaviors were discussed in terms of Fourier transform infrared spectra and interaction parameters based on the binary interaction model. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1472–1480, 2001     

Poly(N-phenyl-2-hydroxytrimethylene amine): Its blends with poly(ϵ-caprolactone) and water-soluble polyethers

A new polymer with pendant hydroxyl groups, namely, poly(N-phenyl-2-hydroxytrime-thylene amine) (PHA), was synthesized by a direct condensation polymerization of aniline and epichlorohydrin in an alkaline medium. The new polymer is amorphous with a glass transition temperature (T_g) of 70°C. Blends of PHA with poly(ϵ-caprolactone) (PCL), as well as with two water-soluble polyethers, poly(ethylene oxide) (PEO) and poly(vinyl methyl ether) (PVME), were prepared by casting from a common solvent. It was found that all the three blends were miscible and showed a single, composition dependent glass transition temperature (T_g). FTIR studies revealed that PHA can form hydrogen bonds with PCL, PEO, and PVME, which are driving forces for the miscibility of the blends. © 1997 John Wiley & Sons, Inc.     

Thermogelling hydrogels of poly(ε-caprolactone-co-D,L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L-lactide) and poly(ε-caprolactone-co-L-lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L-lactide) aqueous solutions

Thermogelling poly(ε-caprolactone-co-D,L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-D,L -lactide) and poly(ε-caprolactone-co-L -lactide)–poly(ethylene glycol)–poly(ε-caprolactone-co-L -lactide) triblock copolymers were synthesized through the ring-opening polymerization of ε-caprolactone and D,L -lactide or L -lactide in the presence of poly(ethylene glycol). The polymerization reaction was carried out in 1,3,5-trimethylbenzene with Sn(Oct)₂ as the catalyst at various temperatures, and the yields were about 96%. The molecular weights and polydispersities (M_w/M_n) by gel permeation chromatography were in the ranges of 5140–6750 and 1.35–1.45, respectively. The differential scanning calorimetry results showed that the melting temperatures of the poly(ε-caprolactone) components were between 30 and 40 °C. By the subtle tuning of the chemical compositions and microstructures of these triblock copolymers, the aqueous solutions underwent sol–gel transitions as the temperature increased, with the suitable lower critical solution temperature in the range of 17–28 °C at different concentrations. Transesterification in the polymerization process generated the redistribution of sequences, which remarkably affected the sol–gel transition temperature. The amphiphilic copolymers formed micelles in aqueous solutions with a diameter of 62 nm and a critical micelle concentration of about 0.032 wt % at 20 °C. Micelles aggregated as the temperature increased, leading to gel formation. The sol–gel transition was studied, with a focus on the structure–property relationship. It is expected to have potential applications in drug delivery and tissue engineering. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4091–4099, 2007     

Compatibility studies of styrene and hydroxyl containing styrene copolymers with poly(ethylene oxide)

Copolymers of styrene with vinylphenyl trifluoromethyl carbinol, p-vinylphenyl trifluoromethyl carbinol, vinylphenyl hexafluorodimethyl carbinol, and p-vinylphenol are conditionally compatible with poly(ethylene oxide), depending on their composition and blending ratios, whereas copolymers of styrene and vinylphenyl methyl carbinol are much less compatible with poly(ethylene oxide), as determined by T_g criteria and differential scanning calorimetry. The crystallinity of poly(ethylene oxide) is changed in the copolymer/poly(ethylene oxide) blends, as indicated by depressions of the poly(ethylene oxide) melting point. Hydrogen-bond formation has been studied in two selected blends by infrared (IR) spectroscopy. Hydrogen bonding dissociation and reassociation as a function of temperature are reported. The conformation changes of poly(ethylene oxide) in the blends, the interaction between copolymer and poly(ethylene oxide) as well as in the reference blend, polystyrene/poly(ethylene oxide), are also investigated.     

Effect of PEO‐PPO‐PEO copolymer on the mechanical and thermal properties and morphological behavior of biodegradable poly (L‐lactic acid) (PLLA) and poly (butylene succinate‐co‐L‐lactate) (PBSL) blends

A blend of two biodegradable and semi‐crystalline polymers, poly (L‐lactic acid) (PLLA; 70 wt%) and poly (butylene succinate‐co‐L‐lactate) (PBSL; 30 wt%), was prepared in the presence of various polyethylene oxide‐polypropylene oxide‐polyethylene oxide (PEO‐PPO‐PEO) triblock copolymer contents (0.5, 1, 2 wt%). Mechanical, thermal properties, and Fourier transform infrared (FTIR) analysis of the blends were investigated. It was found that the addition of copolymer to PLLA/PBSL improved the fracture toughness of the blends as shown by mode I fracture energies. It was supported by morphological analysis where the brittle deformation behavior of PLLA changed to ductile deformation with the presence of elongated fibril structure in the blend with copolymer system. The glass transition temperature (T_g), melting temperature (T_m) of PLLA, and PBSL shift‐closed together indicated that some compatibility exists in the blends. In short, PEO‐PPO‐PEO could be used as compatibilizer to improve the toughness and compatibility of the PLLA/PBSL blends. Copyright © 2010 John Wiley & Sons, Ltd.