Synthese von (Methylthio)penam-Derivaten durch Keten-Addition an 4,5-Dihydro-5-(methylthio)-1,3-thiazole

Synthesis of (Methylthio)penam Derivatives via Keten Addition onto 4,5-Dihydro-5-(methylthio)-1,3-thiazoles The 4,5-dihydro-5-(methylthio)-2-phenyl-1,3-thiazoles 3a and 3b , easily prepared from the corresponding 1,3-thiazol-5(4H)-thiones and MeLi, react with dichloroacetyl chloride ( 5a ) and acidoacetyl chloride ( 5b ) in the presence of Et₃N to give (methylthio)penam derivatives 6 (Table 1). The reaction mechanism is either a [2 + 2] cycloaddition of in situ generated ketene or a two-step reaction (Scheme 2). The structure of 6f has been confirmed by X-ray crystallography (Fig. 2). The relative configuration of 6a-e follow from comparison of their ¹H-NMR spectra with those of 6f (Fig. 1). The 6-azidopenams 6d and 6f have been reduced to aminopenams 8a and 8b , respectively. Acylation of 8a with phenacetyl chloride yields 9 (Scheme 4).     

[(1,3-Dioxolan-2-yliden)methyl]phosphonate und -phosphinate als (einfache) Synthone in der Heterocyclensynthese

[(1,3-Dioxolan-2-ylidene)methyl]phosphonates and -phosphinates as [simple] Synthons in Heterocyclic Synthesis The readily available [(1,3-dioxolane-2-ylidene)methyl]phosphonates and -phosphinates 2a–f (Scheme 1) can be transformed with amines to aliphatic ketene N,O-and N,N-acetales (see Scheme 2, 2a → 3–7 ). Alkanediamines yield with 2a–f the imidazolidines 8a–f and the hexahydropyrimidines 9a–d (Scheme 3). the oxazolidine derivatives 10a–e and the thiazolidine 11 are accessible under special reaction conditions starting from 2a, b (Scheme 4). Hydrazines react with the CN-group-containing ketene O,O-acetals 2a–c to the pyrazoles 12a–g , whereof 12a, d, e can be cyclized to pyrazolo[1,5-a]pyrimidines 13a–d (Scheme 5). Amidines as starting materials transform 2a–c in an analogous way to the pyrimidine derivatives 14a–c (Scheme 6).     

Reaction of 3-Amino-2H-azirines with 2-Amino-4,6-dinitrophenol (Picramic Acid): Synthesis of Quinazoline- and 1,3-Benzoxazole Derivatives

The reaction of 3-(dimethylamino)-2H-azirines 1a–c and 2-amino-4,6-dinitrophenol (picramic acid, 2 ) in MeCN at 0° to room temperature leads to a mixture of the corresponding 1,2,3,4-tetrahydroquinazoline-2-one 5 , 3-(dimethylamino)-1,2-dihydroquinazoline 6 , 2-(1-aminoalkyl)-1,3-benzoxazole 7 , and N-[2-(dimethylamino)phenyl]-α-aminocarboxamide 8 (Scheme 3). Under the same conditions, 3-(N-methyl-N-phenyl-amino)-2H-azirines 1d and 1e react with 2 to give exclusively the 1,3-benzoxazole derivative 7 . The structure of the products has been established by X-ray crystallography. Two different reaction mechanisms for the formation of 7 are discussed in Scheme 6. Treatment of 7 with phenyl isocyanate, 4-nitrobenzoyl chloride, tosyl chloride, and HCl leads to a derivatization of the NH₂-group of 7 (Scheme 4). With NaOH or NaOMe as well as with morpholine, 7 is transformed into quinazoline derivatives 5 , 14 , and 15 , respectively, via ring expansion (Scheme 5). In case of the reaction with morpholine, a second product 16 , corresponding to structure 8 , is isolated. With these results, the reaction of 1 and 2 is interpreted as the primary formation of 7 , which, under the reaction conditions, reacts with Me₂NH to yield the secondary products 5 , 6 , and 8 (Scheme 7).     

Reaktion von 3-(Dimethylamino)-2H-azirinen mit 1,3-Thiazolidin-2-thion

Reaction of 3-(Dimethylamino)-2H-azirines with 1,3-Thiazolidine-2-thione Reaction of 3-(dimethylamino)-2H-azirines 1 and 1,3-thiazolidine-2-thione ( 6 ) in MeCN at room temperature leads to a mixture of perhydroimidazo[4,3-b]thiazole-5-thiones 7 and N-[1-(4,5-dihydro-1,3-thiazol-2-yl)alkyl]-N′,N′-dimethylthioureas 8 (Scheme 2), whereas, in i-PrOH at ca. 60°, 8 is the only product (Scheme 4). It has been shown that, in polar solvents or under Me₂NH catalysis, the primarily formed 7 isomerizes to 8 (Scheme 4). The hydrolysis of 7 and 8 leads to the same 2-thiohydantoine 9 (Scheme 3 and 5). The structure of 7a, 8c , and 9b has been established by X-ray crystallography (Chapt. 4). Reaction mechanisms for the formation and the hydrolysis of 7 and 8 are suggested.     

Reaktionen von 3-(Dimethylamino)-2H-azirinen mit 1,3-Benzoxazol-2(3H)-thion

Reaction of 3-(Dimethylamino)-2H-azirines with 1,3-Benzoxazole-2(3H)-thione The reaction of 3-(dimethylamino)-2H-azirines 2 with 1,3-benzoxazole-2(3H)-thione ( 5 ), which can be considered as NH-acidic heterocycle (pK_aca. 7.3), in MeCN at room temperature, leads to 3-(2-hydroxyphenyl)-2-thiohydantoins 6 and thiourea derivatives of type 7 (Scheme 2). A reaction mechanism for the formation of the products via the crucial zwitterionic intermediate A ′ is suggested. This intermediate was trapped by methylation with Mel and hydrolysis to give 9 (Scheme 4). Under normal reaction conditions, A ′ undergoes a ring opening to B which is hydrolyzed during workup to yield 6 or rearranges to give the thiourea 7. A reasonable intermediate of the latter transformation is the isothiocyanate E (Scheme 3) which also could be trapped by morpholine. In i-PrOH at 55–65° 2a and 5 react to yield a mixture of 6a , 2-(isopropylthio)-1,3-benzoxazole ( 12 ), and the thioamide 13 (Scheme 5). A mechanism for the surprising alkylation of 5 via the intermediate 2-amino-2-alkoxyaziridine F is proposed. Again via an aziridine, e.g. H ( Scheme 6 ), the formation of 13 can be explained.     

Umsetzung von Diazoessigsäure-ethylester mit 1,3-Thiazol-5(4H)-thionen

Reaction of Ethyl Diazoacetate with 1,3-Thiazole-5(4H)-thiones Reaction of ethyl diazoacetate ( 2a ) and 1,3-thiazole-5(4H)-thiones 1a,b in Et₂O at room temperature leads to a complex mixture of the products 5–9 (Scheme 2). Without solvent, 1a and 2a react to give 10a in addition to 5a–9a . In Et₂O in the presence of aniline, reaction of 1a,b with 2a affords the ethyl 1,3,4-thiadiazole-2-carboxylate 10a and 10b , respectively, as major products. The structures of the unexpected products 6a, 7a , and 10a have been established by X-ray crystallography. Ethyl 4H-1,3-thiazine-carboxylate 8b was transformed into ethyl 7H-thieno[2,3-e][1,3]thiazine-carboxylate 11 (Scheme 3) by treatment with aqueous NaOH or during chromatography. The structure of the latter has also been established by X-ray crystallography. In the presence of thiols and alcohols, the reaction of 1a and 2a yields mainly adducts of type 12 (Scheme 4), compounds 5a,7a , and 9a being by-products (Table 1). Reaction mechanisms for the formation of the isolated products are delineated in Schemes 4–7: the primary cycloadduct 3 of the diazo compound and the C?S bond of 1 undergoes a base-catalyzed ring opening of the 1,3-thiazole-ring to give 10 . In the absence of a base, elimination of N₂ yields the thiocarbonyl ylide A ′, which is trapped by nucleophiles to give 12 . Trapping of A ′, by H₂O yields 1,3-thiazole-5(4H)-one 9 and ethyl mercaptoacetate, which is also a trapping agent for A ′, yielding the diester 7 . The formation of products 6 and 8 can be explained again via trapping of thiocarbonyl ylide A ′, either by thiirane C (Scheme 6) or by 2a (Scheme 7). The latter adduct F yields 8 via a Demjanoff-Tiffeneau-type ring expansion of a 1,3-thiazole to give the 1,3-thiazine.     

1,3-Oxathiole and Thiirane Derivatives from the Reactions of Azibenzil and α-diazo amides with thiocarbonyl compounds

The reactions of α-diazo ketones 1a,b with 9H-fluorene-9-thione ( 2f ) in THF at room temperature yielded the symmetrical 1,3-dithiolanes 7a,b , whereas 1b and 2,2,4,4-tetramethylcyclobutane-1,3-dithione ( 2d ) in THF at 60° led to a mixture of two stereoisomeric 1,3-oxathiole derivatives cis- and trans- 9a (Scheme 2). With 2-diazo-1,2-diphenylethanone ( 1c ), thio ketones 2a–d as well as 1,3-thiazole-5(4H)-thione 2g reacted to give 1,3-oxathiole derivatives exclusively (Schemes 3 and 4). As the reactions with 1c were more sluggish than those with 1a,b , they were catalyzed either by the addition of LiClO₄ or by Rh₂(OAc)₄. In the case of 2d in THF/LiClO₄ at room temperature, a mixture of the monoadduct 4d and the stereoisomeric bis-adducts cis- and trans- 9b was formed. Monoadduct 4d could be transformed to cis- and trans- 9b by treatment with 1c in the presence of Rh₂(OAc)₄ (Scheme 4). Xanthione ( 2e ) and 1c in THF at room temperature reacted only when catalyzed with Rh₂(OAc)₄, and, in contrast to the previous reactions, the benzoyl-substituted thiirane derivative 5a was the sole product (Scheme 4). Both types of reaction were observed with α-diazo amides 1d,e (Schemes 5–7). It is worth mentioning that formation of 1,3-oxathiole or thiirane is not only dependent on the type of the carbonyl compound 2 but also on the α-diazo amide. In the case of 1d and thioxocyclobutanone 2c in THF at room temperature, the primary cycloadduct 12 was the main product. Heating the mixture to 60°, 1,3-oxathiole 10d as well as the spirocyclic thiirane-carboxamide 11b were formed. Thiirane-carboxamides 11d–g were desulfurized with (Me₂N)₃P in THF at 60°, yielding the corresponding acrylamide derivatives (Scheme 7). All reactions are rationalized by a mechanism via initial formation of acyl-substituted thiocarbonyl ylides which undergo either a 1,5-dipolar electrocyclization to give 1,3-oxathiole derivatives or a 1,3-dipolar electrocyclization to yield thiiranes. Only in the case of the most reactive 9H-fluorene-9-thione ( 2f ) is the thiocarbonyl ylide trapped by a second molecule of 2f to give 1,3-dithiolane derivatives by a 1,3-dipolar cycloaddition.     

Synthese von 4-Benzylthio- und 4-(Arylthio)-1,3-oxazol-5(2H)-onen

Synthesis of 4-(Benzylthio)-and 4-(Arylthio)-1,3-oxazole-5(2H)-ones Following a known procedure, 4-(benzylthio)-1,3-oxazol-5(2H)-one ( 4a ) was synthesized starting from sodium cyanodithioformate ( 1 ) and cyclohexanone (Scheme 1). The structure of the intermediate 4-(benzylthio)-1,3-thiazol-5(2H)-one ( 3a ) was established by X-ray crystallography. An alternative route was developed for the synthesis of 4-(arylthio)-1,3-oxazol-5(2H)-ones which are not accessible by the former reaction. Treatment of ethyl cyanoformate ( 5 ) with a thiophenol in the presence of catalytic amounts of Et₂NH and TiCl₄, followed by addition of a ketone and BF₃.Et₂O in a one-pot-reaction, gave 4f–i in low-to-fair yields (Scheme 3). Both synthetic pathways-complementary as for benzyl–S and aryl-S derivatives–seem to be limited with respect to variation of substituents of the ketone.     

Synthesis of 4-Alkoxy-1,3-oxazol-5(2H)-ones,Precursors of 1-alkoxy substituted nitrile ylides

4-Alkoxy-1,3-oxazol-5(2H)-ones of type 4 and 7 were synthesized by two different methods: oxidation of the 4-(phenylthio)-1,3-oxazol-5(2H)-one 2a with m-chloroperbenzoic acid in the presence of an alcohol gave the corresponding 4-alkoxy derivatives 4 , presumably via nucleophilic substitution of an intermediate sulfoxide (Scheme 2). The second approach is the BF₃-catalyzed condensation of imino-acetates of type 6 and ketones (Scheme 3). The yields of this more straightforward method were modest due to the competitive formation of 1,3,5-triazine tricarboxylate 8. At 155°, 1,3-oxazol-5(2H)-one 7b underwent decarboxylation leading to an alkoxy-substituted nitrile ylide which was trapped in a 1,3-dipolar cycloaddition by trifluoro-acetophenone to give the dihydro-oxazoles cis- and trans- 9 (Scheme 4). In the absence of a dipolarophile, 1,5-dipolar cyclization of the intermediate nitrile ylide yielded isoindole derivatives 10 (Schemes 4 and 5).     

1,3-Dipolare Cycloadditionen eines Carbonyl-ylids mit 1,3-Thiazol-5(4H)-thionen und Thioketonen

1,3-Dipolar Cycloadditions of a Carhonyl-ylide with 1,3-Thiazole-5(4H)-thiones and Thioketones Inp-xylene at 150°, 3-phenyloxirane-2,2-dicarbonitrile ( 4b ) and 2-phenyl-3-thia-1-azaspiro[4.4]non-1-ene-4-thione ( 1a ) gave the three 1:1 adduets trans- 3a , cis- 3a , and 13a in 61, 21, and 3% yield, respectively (Scheme 3). The stereoisomers trans- 3a and cis- 3a are the products of a regioselective 1,3-dipolar cycloaddition of carbonylylide 2b , generated thermally by an electrocyclic ring opening of 4b (Scheme 6), and the C?S group of 1a . Surprisingly, 13a proved not to be a regioisomeric cycloadduct of 1a and 2b , but an isomer formed via cleavage of the O? C(3) bond of the oxirane 4b . A reaction mechanism rationalizing the formation of 13a is proposed in Scheme 6. Analogous results were obtained from the reaction of 4b and 4,4-dimethyl-2-phenyl-1,3-thiazole-5 (4H)-thione ( 1b , Scheme 3). The thermolysis of 4b in p-xylene at 130° in the presence of adamantine–thione ( 10 ) led to two isomeric 1:1 adducts 15 and 16 in a ratio of ca. 2:1, however, in low yield (Scheme 4). Most likely the products are again formed viathe two competing reaction mechanisms depicted in Scheme 6. The analogous reactions of 4b with 2,2,4,4-tetramethylcyclobutane-1,3-thione ( 11 ) and 9H-xanthene-9-thione ( 12 ) yielded a single 1:1 adduct in each case (Schemes). In the former case, spirocyclic 1,3-oxathiolane 17 , the product of the 1,3-dipolar cycloaddition with 2a corresponding to 3a , was isolated in only 11 % yield. It is remarkable that no 2:1 adduct was formed even in the presence of an excess of 4b. In contrast, 4b and 12 reacted smoothly to give 18 in 81 % yield; no cycloadduct of the carbonylylide 2a could be detected. The structures of cis- 3a , 13a , 15 , and 18 , as well as the structure of 14 , which is a derivative of trans- 3a , have been established by X-ray crystallography (Figs. 1–3, Table).     

[2+3] Cycloadditions of ‘Thiocarbonyl Ylides’ (= (Alkylidenesulfonio)methanides) and diazoalkanes with N,N′-(thiocarbonyl)diimidazole (= 1,1′-(carbonothioyl)bis[1H-imidazole])

Heating of a mixture of N,N′-(thiocarbonyl)diimidazole (= 1,1′-(carbonothioyl)bis[1H-imidazole]; 1 ) and 2,5-dihydro-1,3,4-thiadiazole 2a or 2b gave the 1,3-dithiolanes 4a and 4b , respectively, via a regiospecific 1,3-dipolar cycloaddition of the corresponding ‘thiocarbonyl methanides’ 3a , b onto the C?S group of 1 (Schemes 1 and 2). The adamantane derivative 4b was not stable in the presence of 1H-imidazole and during chromatographic workup. The isolated 1,3-dithiole 5 is the product of a base-catalyzed elimination of 1H-imidazole from the initial cycloadduct 4b . The formation of the S,N-acetal 6 can be rationalized by a protonation of the ‘thiocarbonyl ylide’ 3b followed by a nucleophilic addition of 1H-imidazole. With the diazo compounds 8a–e (Scheme 3) 1 underwent a regiospecific 1,3-dipolar cycloaddition to give the corresponding 2,5-dihydro-1,3,4-thiadiazole derivatives 9 , which spontaneously eliminated 1H-imidazole to yield (1H-imidazol-1-yl)-1,3,4-thiadiazoles 10 . The structures of 10a and 10d were established by X-ray crystallography. In the case of diazodiphenylmethane ( 8f ), the initial cycloadduct 9f decomposed via a ‘twofold extrusion’ of N₂ and S to give 1,1′-(2,2-diphenylethenylidene)bis[1H-imidazole] ( 11 ; Scheme 3).     

Die Struktur des Adduktes aus 3-Dimethylamino-2,2-dimethyl-2H-azirin und 3-Methyl-2,4-diphenyl-1,3-oxazolium-5-olat. Vorläufige Mitteilung

Structure of the adduct from 3-dimethylamino-2,2-dimethyl-2H-azirine and 3-methyl-2,4-diphenyl-1,3-oxazolium-5-olate 3-Dimethylamino-2,2-dimethyl-2H-azirine ( 1 ) reacts with 3-methyl-2,4-diphenyl-1,3-oxazolium-5-olate ( 5a ) to give a 1:1 adduct ( 7 ) in a 88% yield. Its crystal structure has been determined by X-ray analysis (direct methods) and refined with 1056 structure amplitudes to R = 0,032. The crystal system is monoclinic, space group P2₁/c, with unit cell dimensions a = 10.663, b = 9,828, c = 18,592 Å, and β = 90,63°. It is obvious that 4-dimethylamino-5,5-dimethyl-2-[α-(N-methyl-benzamido)benzyliden]-Δ³-1,3-oxazoline ( 7 ) arises from an addition of 1 to the valence-polaromeric ketene form 5b of the mesoionic oxazolone 5a (Scheme 3).     

Umsetzung von 3-Amino-2H-azirinen mit Salicylohydrazid

Reaction of 3-Amino-2H-azirines with Salicylohydrazide 3-Amino-2H-azirines 1a–g react with salicylohydrazide ( 7 ) in MeCN at 80° to give 2H, 5H-1,2,4-triazines 10 , 1,3,4-oxadiazoles 12 and, in the case of 1d , 1,2,4-triazin-6-one 11a (Scheme 3). The precursor of these heterocycles, the amidrazone of type 9 , except for 9c and 9g , which could not be isolated, has been found as the main product after reaction of 1 and 7 in MeCN at room temperature. 3-(N-Methyl-N-phenylamino)-2-phenyl-2H-azirin ( 1g ) reacts with 7 to give mainly the aromatic triazines 15b₁ and 15b₂ . In this case, two unexpected by-products, 16 and salicylamide ( 17 ), occurred, probably by disproportionation of a 1:1 adduct from 1g and 7 (Scheme 8). Oxidation of 10f with DDQ leads to the triazine 15a . The structure of 10c, 11a, 12c, 13 (by-product in the reaction of 1b and 7 ), the N′-phenylureido derivative 14 of 9d (Scheme 4) as well as 15b₂ has been established by X-ray crystallography. The ratio of 10/12 as a function of substitution pattern in 1 and solvent has been investigated (Tables 1, 3, 4, and 7). A mechanism for the formation of 10 and 12 is proposed in Scheme 7.     

Bildung von 5,6-Dihydro-1,3(4H)-thiazin-4-carbonsäure-estern aus 4-Allyl-1,3-thiazol-5(4H)-onen

Formation of Methyl 5,6-Dihydro-l, 3(4H)-thiazine-4-carboxyiates from 4-Allyl-l, 3-thiazol-5(4H)-ones . The reaction of N-[1-(N, N-dimethylthiocarbamoyl)-1-methyl-3-butenyl]benzamid ( 1 ) with HCl or TsOH in MeCN or toluene yields a mixture of 4-allyl-4-methyl-2-phenyl-1,3-thiazol-5(4H)-one ( 5a ) and allyl 4-methyl-2-phenyl-1,3-thiazol-2-yl sulfide ( 11 ; Scheme 3). Most probably, the corresponding 1,3-oxazol-5(4H)-thiones B are intermediates in this reaction. With HCl in MeOH, 1 is transformed into methyl 5,6-dihydro-4,6-dimethyl-2-phenyl-1,3(4H)-thiazine-4-carboxylate ( 12a ). The same product 12a is formed on treatment of the 1,3-thiazol-5(4H)-one 5a with HCl in MeOH (Scheme 4). It is shown that the latter reaction type is common for 4-allyl-substituted 1,3-thiazol-5(4H)-ones.     

Exceptional Products of the Desulfurization of N,2-Diaryl-5-(arylimino)- 2,5-dihydro-4-nitroisothiazol-3-amines

The desulfurization of several N,2-diaryl-5-(arylimino)-2,5-dihydro-4-nitroisothiazol-3-amines 5 with Ph₃P led to complex mixtures of products in low yields. For instance, quinoxaline-2-carboxamide 1-oxides of type 6 (Scheme 2) and, in some cases, also 3-nitroquinolines of type 7 (Scheme 5) were isolated. By the desulfurization of the substituted derivatives 5b – e , a rearrangement of the intermediates yielded 6 and 7 with a different substitution pattern from that expected from the starting materials (Scheme 3). The additional formation of two isomeric 1,2,5-oxadiazole-3-carboxamides 8 was observed only in the case of 5d (R¹=R²=F) (Scheme 6). Under the same reaction conditions, the major product of the desulfurization of 5c was the quinoxaline-2-carboxamide 1-oxide 9 (Scheme 7). Reaction mechanisms involving intermediate ketene imines and O transfer from the NO₂ group to the neighboring ketene imine are proposed. The structures of 6a , 6e , 6k , 7b , and 8d were established by X-ray crystallography, while the structure of 9 was elucidated by 2D-NMR spectroscopy and corroborated by X-ray crystallography.     

Synthesis of 1,3‐Selenazol‐2(3H)‐imines

The reaction of N,N′‐diarylselenoureas 16 with phenacyl bromide in EtOH under reflux, followed by treatment with NH₃, gave N,3‐diaryl‐4‐phenyl‐1,3‐selenazol‐2(3H)‐imines 13 in high yields (Scheme 2). A reaction mechanism via formation of the corresponding Se‐(benzoylmethyl)isoselenoureas 18 and subsequent cyclocondensation is proposed (Scheme 3). The N,N′‐diarylselenoureas 16 were conveniently prepared by the reaction of aryl isoselenocyanates 15 with 4‐substituted anilines. The structures of 13a and 13c were established by X‐ray crystallography.     

Umsetzung von Di(tert-butyl)- und Diphenyldiazomethan mit 1,3-Thiazol-5(4H)-thionen: Isolierung und Kristallstruktur des primären Cycloadduktes

Reaction of Di(tert-butyl)- and Diphenyldiazomethane and 1,3-Thiazole-5(4H)-thiones: Isolation and Crystal Structure of the Primary Cycloadduct Reactions of diazo compounds with C?S bonds proceed via the formation of thiocarbonyl ylides, which, under the reaction conditions, undergo either 1,3-dipolar cycloadditions or electrocyclic ring closer to thiiranes (Scheme 1). With the sterically hindered di(tert-butyl)diazomethane ( 2c ), 1,3-thiazole-5(4H)-thiones 1 react to give spirocyclic 2,5-dihydro-1,3,4-thiadiazoles 3 (Scheme 2). These adducts are stable in solution at ?20°, and they could be isolated in crystalline form. The structure of 3c was established by X-ray crystallography. In CDCl₃ solution at room temperature, a cycloreversion occurs, and the adducts of type 3 are in an equilibrium with 1 and 2c . In contrast, the reaction of 1 with diphenyldiazomethane ( 2d ) gave spirocyclic thiiranes 4 as the only product in high yield (Scheme 3). The crystal structure of 4b was also determined by X-ray analysis. The desulfurization of compounds 4 to 4,5-dihydro-5-(diphenylmethylidene)-1,3-thiazoles 5 was achieved by treating 4 with triphenylphosphine in boiling THF. The crystal structure of 5f is shown.     

3-(Dimethylamino)-2,2-dimethyl-2H-azirin als α-Aminoisobuttersäure(Aib)-Äquivalent: Cyclische Depsipeptide durch direkte Amid-Cyclisierung

3-(Dimethylamino)-2,2-dimethyl-2H,-azirine as an α-Aminoisobutyric-Acid (Aib) Equivalent: Cyclic Depsipeptides via Direct Amid Cyclization In MeCN at room temperature, 3-(dimethylamino)-2,2-dimethyl-2H-azirine ( 1 ) and α-hydroxycarboxylic acids react to give diamides of type 8 (Scheme 3). Selective cleavage of the terminal N,N-dimethylcarboxamide group in MeCN/H₂O leads to the corresponding carboxylic acids 13 (Scheme 4). In toluene/Ph SH , phenyl thioesters of type 11 are formed (see also Scheme 5). Starting with diamides 8 , the formation of morpholin-2,5- diones 10 has been achieved either by direct amide cyclization via intermediate 1,3-oxazol-5(4H)-ones 9 or via base-catalyzed cyclization of the phenyl thioesters 11 (Scheme 3). Reaction of carboxylic acids with 1 , followed by selective amide hydrolysis, has been used for the construction of peptides from α-hydroxy carboxylic acids and repetitive α-aminoisobutyric-acid (Aib) units (Scheme 4). Cyclization of 14a, 17a , and 20a with HCI in toluene at 100° gave the 9-, 12-, and 15-membered cyclic depsipeptides 15, 18 , and 21 , respectively.     

Investigations on the Reactions of a Carbonylcarbene with Substituted 1,3‐Dioxepins

Several dioxepins were treated with dimethyl diazomalonate under bis(acetylacetonato)copper(II) catalysis. The 4,7‐dihydro‐2‐methyl‐1,3‐dioxepin ( 1a ) gave oxonium ylide originated products and a cyclopropane derivative (see 3a and 2a , resp., in Scheme 3,b). However, the 2,2‐dimethyl derivative 1b of 1,3‐dioxepin yielded only the cyclopropanation product 2b (Scheme 3,b), whereas 4,5‐dihydro‐2‐methyl‐1,3‐dioxepin ( 9 ) gave the furanofuran derivative 10 (Scheme 4).     

N-(1,3-Thiazol-5(4H)-yliden)amine aus 1,3-dipolaren Cycloadditionen von Aziden mit 1,3-Thiazol-5(4H)-thionen

N-(1,3-Thiazol-5(4H)-ylidene)amines via 1,3-Dipolar Cycloaddition of Azides and 1,3-Thiazol-5(4H)-thiones Organic azides 5 and 4,4-dimethyl-2-phenyl-1,3-thiazol-5(4H)-thione ( 2 ) in toluene at 90° react to give the corresponding N-(1,3-thiazol-5(4H)-ylidene)amines (= 1,3-thiazol-5(4H)-imines) 6 in good yield (Table). A reaction mechanism for the formation of these scarcely investigated thiazole derivatives is formulated in Scheme 3: 1,3-Dipolar azide cycloaddition onto the C?S group of 2 leads to the 1:1 adduct C . Successive elimination of N₂ and S yields 6 , probably via an intermediate thiaziridine E .