Synthesis and properties of new aromatic poly‐(ether benzoxazole)s from 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl and aromatic dicarboxylic acid chlorides

A new bis(o‐aminophenol) with a crank and twisted noncoplanar structure and ether linkages, 2,2′‐bis(4‐amino‐3‐hydroxyphenoxy)biphenyl, was synthesized by the reaction of 2‐benzyloxy‐4‐fluoronitrobenzene with biphenyl‐2,2′‐diol, followed by reduction. Biphenyl‐2,2′‐diyl‐containing aromatic poly(ether benzoxazole)s with inherent viscosities of 0.52–1.01 dL/g were obtained by a conventional two‐step procedure involving the polycondensation of the bis(o‐aminophenol) monomer with various aromatic dicarboxylic acid chlorides, yielding precursor poly(ether o‐hydroxyamide)s, and subsequent thermal cyclodehydration. These new aromatic poly(ether benzoxazole)s were soluble in methanesulfonic acid, and some of them dissolved in m‐cresol. The aromatic poly(ether benzoxazole)s had glass‐transition temperatures of 190–251 °C and were stable up to 380 °C in nitrogen, with 10% weight losses being recorded above 520 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2656–2662, 2002     

Synthesis of heterocyclic monomers via Reissert chemistry

The chemistry of Reissert compounds has been used to synthesize activated difluorotetraketone monomers containing two coupled isoquinolyl moieties, linked at either the 1,1′‐ or 4,4′‐positions. These monomers offer routes to novel families of poly(heteroarylene ether)s. New 4,4′‐coupled bis(Reissert compound) 9 containing 4,4′‐diketo moieties failed to afford the desired difluorotetraketo monomer upon attempted rearrangement. However, analogous bis(Reissert compound) 19 containing 4,4′‐dibenzyl units did so, via aldehyde condensation, hydrolysis of the intermediate ester and oxidation of the four benzylic moieties to keto groups; thus the novel difluorotetraketone monomer 10 was prepared. Novel bis(Reissert compound)s 24 , 28 , and 35 were synthesized from diacid chlorides and 4‐(p‐fluorobenzyl)isoquinoline. Rearrangement of 24 to the diketone 29 , followed by oxidation of the 4‐benzyl moieties resulted in difluorotetraketone monomer 30 containing a 1,1′‐linked bisisoquinoline. The 1,1′‐linked bis(isoquinolylfluorodiketo) monomer 38 , isomeric with 10 , was prepared from 4‐(p‐fluorobenzyl) Reissert compound 36 by condensation with terephthaldehyde, ester hydrolysis to diol 37 , and oxidation. In the course of this effort, a number of new isoquinoline Reissert compounds were synthesized as model systems. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3856–3867, 2010     

Synthesis of macrocyclic bis(phenylbenzoxazole) derivatives via tandem claisen rearrangement and their fluorescence behavior

Novel macrocyclic bis(phenylbenzoxazole) derivatives were easily synthesized from macrocyclic isobutenyl bis(amide‐ether)s by tandem Claisen rearrangement and subsequent intramolecular cyclization of the amide‐phenol intermediates. The position of substitution of the oligoethylene glycol moiety on the phenylamido groups of the macrocycles did not have a large effect on the yields of the bis(benzoxazole)s for the meta and para derivatives. The fluorescence quantum yields of most of the macrocyclic bis(benzoxa‐zole)s were lower than those of the corresponding nonmacrocyclic bis(benzoxazole) model compounds. The quantum yields of the para‐substituted macrocyclic bis(benzoxazole)s were clearly lower than those of the model compounds and decreased with increasing length of the oligoethylene chain.     

Synthesis of high molecular weight poly(ether ketone)s by polycondensation of activated bis(aryl chloride)s with bisphenolates

The ability to achieve high molecular weight poly(ether ketone)s from the polycondensation of bis(aryl chloride)s with bis(phenolate)s has been consistently demonstrated. The polymerizations presented here help to delineate for specific bis(aryl chloride)/bisphenolate pairs the reaction conditions required to obtain high molecular weight polymers. Polycondensation of 1,3-bis(4-chlorobenzoyl)-5-tert-butylbenzene ( 6 ) and 2,2′-bis(4-chlorobenzoyl)-biphenyl ( 15 ) with various bisphenolates as well as of 2,2′-bis(4-hydroxyphenoxy)biphenyl ( 33 ) with 4,4′-dichlorobenzophenone ( 41 ) and 1,3-bis(4-chlorobenzoyl)benzene ( 43 ) were used as representative model systems to select reaction conditions that led to high molecular weight polymers. © 1995 John Wiley & Sons, Inc.     

Axially Dissymmetric Diphosphines in the Biphenyl Series: Synthesis of (6,6′-Dimethoxybiphenyl-2,2′-diyl)bis(diphenylphosphine)(‘MeO-BIPHEP’) and Analogues via an ortho-Lithiation/Iodination Ullmann-Reaction Approach

The new axially dissymmetric diphosphines (R)- and (S)-(6,6′-dimethoxybiphenyl-2,2′-diyl)bis(diphenyl phosphine) ((R)- and (S)- 5a ; ‘MeO-BIPHEP’) and the analogues (R)- and (S)- 5b and 5c have been synthesized in enantiomerically pure form. These ligands have become readily available by a synthetic scheme which employs, as key steps, an ortho-lithiation/iodination reaction of the (m-methoxyphenyl)diprienylphosphine oxides 8 and a subsequent Ullmann reaction of the resulting iodides 9 to provide the racemic bis(phosphine oxides) 10 . The bis(phosphine oxides) 10 subsequently are resolved with (?)-(2R,3R)- and (+)-(2S,3S)-O-2,3-dibenzoyltartaric acid and reduced to diphosphines 5 . The Ullmann reaction constitutes a new and efficient route to 2,2′-bis(phosphinoyl)-substituted biphenyl systems. Absolute configurations were established for (R)- 5a by X-ray analysis of the derived Pd complex (R,R)- 17a , and for 5b and 5c by means of ¹H-NMR comparisons of the derived Pd complexes 16 or 17 , respectively, and by means of CD comparisons. The MeO-BIPHEP diphosphine 5a proved to be as efficient as the previously described BIPHEMP diphosphine ((6,6′-dimethylbiphenyl-2,2′-diyl)bis(diphenylphosphine)) in enantioselective isomerizations and hydrogenations.     

Synthesis of polyesters by the polyaddition of bis(oxetane)s with active di(ester)s

The polyaddition of bis(oxetane)s 1,4‐bis[(3‐ethyl‐3‐oxetanylmethoxymethyl)]benzene (BEOB), 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (4,4′‐BEOBP), 1,4‐bis[(3‐ethy‐3‐oxetanyl)methoxy] ‐benzene (1,4‐BEOMB), 1,2‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]benzene (1,2‐BEOMB), 4,4‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOMB), 3,3′,5,5′‐tetramethyl‐[4,4′‐bis(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (TM‐BEOBP) with active diesters di‐s‐phenylthioterephthalate (PTTP), di‐s‐phenylthioisoterephthalate (PTIP), 4,4′‐di(p‐nitrophenyl)terephthalate (NPTP), 4,4′‐di(p‐nitrophenyl)isoterephthalate (NPIP) were carried out in the presence of tetraphenylphosphonium chloride (TPPC) as a catalyst in NMP for 24 h, affording corresponding polyesters with M_n's in the range 2200–18,200 in 41–98% yields. The obtained polymers would soluble in common organic solvents and had high thermal stabilities. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1528–1536, 2004     

Synthesis of 5,5′[[[3-(dimethylamino)propyl]imino]]bis[3-(trichloromethyl)-1,2,4-thiadiazole] and related thiadiazoles as antimalarial agents

The condensation of 5-chloro-3-(trichloromethyl)-1,2,4-thiadiazole (VIII) with N,N-dimelhyl-1,3-propanediamine gave 5-¶ [3-(dimethylammo)propyl]amino¶-3-(trichloromethyl)-1,2,4-thia-diazole(5) and 5,5′-¶[3-(dimethylamino)propyl]imino)¶bis[3-(triehloromethyl)-1,2,4-tliiadiazole] (14), together with 5,5′-[(3-¶ methyl[ 3-(trichloromethyl)-1,2,4-thiadiazol-5-yl ]amino Jpropyl)-imino]bis[3-(trichloromethyl)-1,2,4-thiadiazole] ( 17 ) which was formed via an unusual displacement of the distal methyl group of 14. The remarkable antimalarial activity of 14 prompted the synthesis of an array of 5-amino-3-(trichloromethyl, methyl, and 3,4-dichlorophenyl)-1,2,4-thiadiazoles and 5,5′-¶[(dialkylamino)alkyl]imino¶bis[3-(trichloromethyl, methyl, and 3,4-dichlorophenyl)-1,2,4-thiadiazoles] from an amine and the requisite 5-chloro-3-substituted-1,2,4-thiadiazoles, which were prepared from the appropriate amidine and trichloromethylsull'enyl chloride. 5-¶3-[(Diethylamino)methyl]-p-anisidino ¶-3-(triehloromethyl)-1,2,4-thiadiazole ( 13 ) was active against a chloroquine-resistant line of Plasrnodium berghei in the mouse, and compound 14 , the most promising member of the series overall, was designated for expanded antimalarial and toxicological studies. Structure-activity relationships against P. berghei in mice and P. gallinaceum in chicks are discussed.     

Structural characterization of the derivatives of bis{[2,6‐(dimethylamino)methyl]phenyl} selenide with palladium(II) and mercury(II)

The intramolecularly coordinated homoleptic diorgano selenide bis{2,6‐bis[(dimethylamino)methyl]phenyl} selenide, C₂₄H₃₈N₄Se or R₂Se, where R is 2,6‐(Me₂NCH₂)₂C₆H₃, 14 , was synthesized and its ligation reactions with Pd^II and Hg^II precursors were explored. The reaction of 14 with SO₂Cl₂ and K₂PdCl₄ resulted in the formation of the meta C—H‐activated dipalladated complex {μ‐2,2′‐bis[(dimethylamino)methyl]‐4,4′‐bis[(dimethylazaniumyl)methyl]‐3,3′‐selanediyldiphenyl‐κ⁴C¹,N²:C^1′,N^2′}bis[dichloridopalladium(II)], [Pd₂Cl₄(C₂₄H₃₈N₄Se)] or [{R(H)PdCl₂}₂Se], 15 . On the other hand, when ligand 14 was reacted with HgCl₂, the reaction afforded a dimercurated selenolate complex, {μ‐bis{2,6‐bis[(dimethylamino)methyl]benzeneselanolato‐κ⁴N²,Se:Se,N⁶}‐μ‐chlorido‐bis[chloridomercury(II)], [Hg₂(C₁₂H₁₉N₂Se)Cl₃] or RSeHg₂Cl₃, 16 , where two Hg^II ions are bridged by selenolate and chloride ligands. In palladium complex 15 , there are two molecules located on crystallographic twofold axes and within each molecule the Pd moieties are related by symmetry, but there are still two independent Pd centers. Mercury complex 16 results from the cleavage of one of the Se—C bonds to form a bifurcated SeHg₂ moiety with the formal charge on the Se atom being ?1. In addition, one of the Cl ligands bridges the two Hg atoms and there are two terminal Hg—Cl bonds. Each Hg atom is in a distorted environment which can be best described as a T‐shaped base with the bridging Cl atom in an apical position, with several angles close to 90° and with one angle much larger and closer to 180°.     

Novel tricyclic heterocycles (benzopyrrocolines) arising via carbanion attack on a nitrile function

A new reaction of 2-n-alkanoyl-1,2-dihydroisoquinaldonitriles 1 (isoquinoline Reissert compounds) has been discovered. As previously reported reaction of the conjugate bases of Reissert compounds with alkyl halides yields the corresponding 1-alkyl derivatives 2 . However, compounds 2 , R = n-alkyl, with only a catalytic amount of bases form the enolate ion, which attacks the neighboring nitrile functionality to produce directly in the same reaction vessel excellent yields of benzopyrrocoline derivatives 5-10 . The nmr spectrum reveals a solvent dependent tautomeric equilibrium between ketoeneamine ( a ) and ketoimine ( b ) forms. Unlike compounds 2 the double bonds of the pyridine ring of compounds 7 and 8 were readily reduced with hydrogen. Thus, n-alkanoyl Reissert compounds afford a convenient route to the corresponding benzopyrroco-lines.     

Synthesis and comparative study on polyetherimides from isomeric 4,4′-isopropylidenediphenoxy bis(phthalic anhydride)s

Two isomers of commercial 4,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (4,4′-BPADA), that is, 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,4′-BPADA) and 3,3′-(4,4′-isopropylidenediphenoxy) bis(phthalic anhydride) (3,3′-BPADA), were synthesized through aromatic nucleophilic substitution from nitrophthalonitrile and bisphenol A. 3,4′-BPADA was first synthesized from two intermediates, that is, 3-(4-[4-hydroxyphenylisopropylidene] phenoxy) phthalonitrile (3-BPADN) and 3,4′-(4,4′-isopropylidenediphenoxy) bis(phthalonitrile) (3,4′-BPATN). The corresponding three series of polyetherimides (PEIs) were prepared with two representative aromatic diamines (4,4′-oxydianiline and m-phenylenediamine (m-PDA)) via two-step procedure and chemical imidization. Isomeric polyimides showed T_gs from 206 to 256°C in nitrogen and T_d5%s from 488 to 511°C in argon, good mechanical properties (tensile moduli of 2.3–3.3 GPa, tensile strengths of 70–96 MPa, and elongations at break of 3.2%–5.1%), and good solubility. With the introduction of 3-substituted phthalimide unit, PEIs displayed higher T_g values, lower strengths and elongations, better solubility and larger d-spacings. The rheological properties of thermoplastic polyimide resins based on the BPADA isomers were investigated, which showed that polyetherimide PEI-3b derived from 3,3′-BPADA and m-PDA had the lowest melt viscosity among the isomers, indicating that the melt processibility had been greatly improved.     

ESR study on some copper(Ⅱ)complexes of bis(4''''-benzo-15-crown-5)

ESR measurements have been carried out for some copper(Ⅱ) complexes of bis(4'-ben-zo-15-crown-5) at 77 K.The results of ESR spectrometric titration indicated that the binuclear com-plexes were prepared in the present system.The binuclear complexes revealed characteristic ESRg-anisotropies (gZ相似文献   

Synthesis of polydihydropyridazinones from bis(3-benzoylpropionic acids) and aromatic dihydrazines

A new class of polydihydropyridazinones has been synthesized by the solution cyclopolycondensation in m-cresol of 4,4′-oxy- and 4,4′-ethylenebis(3-benzoylpropionic acids) with aromatic dihydrazines such as bis(4-hydrazinophenyl) sulfone and bis(4-hydrazinophenyl)methane. The polymers having inherent viscosities of 0.2–0.4 were highly soluble in a wide range of solvents including m-cresol, N,N-dimethylacetamide, and pyridine. Thermogravimetric analysis of the polydihydropyridazinones showed initial weight losses commencing at 290–350°C in both air and nitrogen.     

Synthesis of bis(indolylmaleimide) macrocycles

The synthesis of a novel class of macrocyclic bis(indolylmaleimides) is reported. The key step involves the intermolecular connection of 2,2′‐bridged indoles with 3,4‐dibromo‐2,5‐dihydro‐1H‐2,5‐pyrroledione (dibromomaleimide) derivatives. The bis(indolylmaleimides) afforded by this method were further processed by intramolecular nucleophilic substitution of the remaining bromo substituents forming flexible N‐substituted macrocycles ( 9a‐9j, 10a‐10e ) and, by connecting both maleimides, semi rigid macrocycles ( 7a‐7xx ).     

Synthesis of novel bis(chromenes) and bis(chromeno[3,4-C]pyridine) incorporating piperazine moiety

Novel bis(2-oxo-2H-chromene) as well as bis(2-imino-2H-chromene) derivatives incorporating piperazine moiety were prepared by the cyclocondensation reaction of bis(2-hydroxybenzaldehyde) with two equivalents of each of the appropriate β-ketoesters or acetonitrile derivatives. The bis(2-imino-2H-chromene-3-carbothioamide) derivative was used as a key synthon for construction of novel bis(3-(4-substituted thiazol-2-yl)-2H-chromen-2-one) derivatives via its cyclocondensation with a series of the appropriate α-halocarbonyl derivatives. Moreover, the bis(2-hydroxybenzaldehyde) reacted with four equivalents of the appropriate acetonitrile derivatives to afford the corresponding bis(3H-chromeno[3,4-c]pyridine) derivatives. Elucidation of the structure of the novel bis(chromenes) bearing piperazine nucleus was established by the spectral data and elemental analyses.     

Polymeric bis[bis(2,2′-bipyridine)­nickel(II)] hexavanadate(V)

The structure of the title compound, μ-hexavanadato(V)-bis­[bis(2,2′-bi­pyridine)­nickel(II)], [{Ni(C₁₀H₈N₂)₂}₂{V₆O₁₇}], is composed of vanadium oxide layers intercalated by complex [Ni(bipy)₂]²⁺ cations (bipy is 2,2′-bi­pyridine). The structure is isomorphous with that reported recently for [Zn(bipy)₂]₂[V₆O₁₇] [Zhang, DeBord, O'Connor, Haushalter, Clearfield & Zubieta (1996). Angew. Chem. Int. Ed. Engl. 35 , 989–991]. The vanadium oxide layers are built up solely from VO₄ tetrahedra by corner sharing and clearly exhibit a sinusoidal ruffling. Two O atoms from a single vanadium oxide layer are coordinated to each Ni atom of the complex cations in a cis fashion, with Ni—O distances of 2.027 (3) and 2.087 (3) Å, thus maintaining the two-dimensional structure.     

Preparation of samarimm(ii) sulfide by the reaction of samarium(II) bis[bis(trimethylsilyl)amide] with hydrogen sulfide

X-ray amorphous samarium(II) sulfide was prepared by the reaction of H₂S with samarium(II) bis[bis(trimethylsilyl)amide] (1) in THF at 10^–2 Torr. Compound1 was prepared by two methods: 1) the reaction of SmI₂ with lithium bis(trimethylsilyl)amide and 2) the reaction of samarium naphthalide with bis(trimethylsilyl)amine. SmS was transformed to the polycrystalline state with the lattice parametera = 5.92 Å by annealing at 400–500 °C.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 241–243, February, 1995.     

3,4‐Bis(bromomethyl)thieno[2,3‐b]thiophene: Versatile Precursors for Novel Bis(triazolothiadiazines), Bis(quinoxalines), Bis(dihydrooxadiazoles), and Bis(dihydrothiadiazoles)

A synthesis of novel bis(triazolothiadiazines) 11 , 12 , 13 , 14 , bis(quinoxalines) 16 and 17 , bis(thiadiazoles) 24 and 25 , and bis(oxadiazole) 31 , which are linked to the thieno[2,3‐b]thiophene core via phenoxymethyl group, was reported. Thus, reaction of the bis(α‐bromoketones) 6 and 7 with the corresponding 4‐amino‐3‐mercapto‐1,2,4‐triazole derivatives 8 , 9 , 10 in ethanol–DMF mixture in the presence of a few drops of triethylamine as a catalyst under reflux afforded the novel bis(5,6‐dihydro‐s‐triazolo[3,4‐b]thiadiazines) 11 , 12 , 13 , 14 in 60–72% yields. The bis(quinoxalines) 16 and 17 were also synthesized as a sole product in high yields by the reaction of 6 and 7 with o‐phenylenediamine 15 in refluxing acetonitrile in the presence of piperidine as a catalyst. Cyclization of the bis(aldehyde thiosemicarbazones) 20 and 21 with acetic anhydride afforded the corresponding bis(4,5‐dihydro‐1,3,4‐thiadiazolyl) derivatives 24 and 25 in good yield. Bis(5‐phenyl‐2,3‐dihydro‐1,3,4‐oxadiazole) derivative 31 could be obtained in 67% yield by cyclization of the appropriate bis(N‐phenylhydrazone) 29 in refluxing acetic anhydride for 3 h.     

Synthesis of polyphosphonates containing pendant chloromethyl groups by the polyaddition of bis(oxetane)s with phosphonic dichlorides

The polyaddition of 4,4′‐bis[(3‐ethyl‐3‐oxetanyl)methoxy]biphenyl (4,4′‐BEOBP) and phenylphosphonic dichloride (PPDC) with quaternary onium salts as catalysts proceeded under mild reaction conditions to afford a polymer containing phosphorous atoms in its main chain. A polyphosphonate with a high number‐average molecular weight (10,300) was obtained by the reaction of 4,4′‐BEOBP and PPDC in the presence of tetraphenylphosphonium chloride (TPPC) in o‐dichlorobenzene at 130 °C for 24 h. The structure of the resulting polymer was confirmed with IR, ¹H NMR, and ³¹P NMR spectroscopy. Furthermore, it was proved that the polyaddition of certain bis(oxetane)s with phosphonic dichlorides proceeded smoothly to give corresponding polyphosphonates with TPPC as the catalyst. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3835–3846, 2002     

Silylhydrazine und dimere N,N′‐Dilithium‐N,N′‐bis(silyl)hydrazide – Synthesen,Reaktionen, Isomerisierungen

Silylhydrazines and Dimeric N,N′‐Dilithium‐N,N′‐bis(silyl)hydrazides – Syntheses, Reactions, Isomerisations Di‐tert.‐butylchlorosilane reacts with dilithiated hydrazine in a molar ratio to give the N,N′‐bis(silyl)hydrazine, [(Me₃C)₂SiHNH]₂, ( 5 ). Isomeric tris(silyl)hydrazines, N‐difluorophenylsilyl‐N′,N′‐bis(dimethylphenylsilyl)hydrazine ( 7 ) and N‐difluorophenylsilyl‐N,N′‐bis(dimethylphenylsilyl)hydrazine ( 8 ) are formed in the reaction of N‐lithium‐N′‐N′‐bis(dimethylphenylsilyl)hydrazide and F₃SiPh. Isomeric bis(silyl)hydrazines, (Me₃C)₂SiFNHNHSiMe₂Ph ( 9 ) and (Me₃C)₂‐ SiF(PhMe₂Si)N–NH₂ ( 10 ) are the result of the reaction of di‐tert.‐butylfluorosilylhydrazine and ClSiMe₂Ph in the presence of Et₃N. Quantum chemical calculations for model compounds demonstrate the dyotropic course of the rearrangement. The monolithium derivative of 5 forms a N‐lithium‐N′,N′‐bis(silyl)hydrazide ( 11 ). The dilithium salts of 5 ( 13 ) and of the bis(tert.‐butyldiphenylsilyl)hydrazine ( 12 ) crystallize as dimers with formation of a central Li₄N₄ unit. The formation of 12 from 11 occurs via a N′ → N‐silyl group migration. Results of crystal structure analyses are reported.     

Synthesis and characterization of sodium bis(trimethylstannyl) amide and bis(trimethylsilyl) bis(trimethylstannyl) -phospha-tetrazene

Sodium bis(trimethylstannyl)amide NaN(SnMe₃)₂, isolated by the reaction of trimethylstannyldiethylamine with sodium amide, reacts with tris(trimethylsilyl)hydrazino—dichloro-phosphine to form bis(trimethylsilyl)bis(trimethylstannyl)-2-phospha-2-tetrazene, (Me₃Si)₂N-N=P-N(SnMe₃)₂. Both the molecules have been isolated and characterized.