Monomer-isomerization radical polymerization of di-tert-butyl maleate and preparation of poly(fumaric acid) via pyrolysis

Di-tert-butyl maleate (DtBM) did not polymerize with 2,2′-azobis(isobutyronitrile) as a radical initiator, but DtBM easily homopolymerized via a monomer-isomerization radical polymerization mechanism to give a high molecular weight polymer when morpholine was added into the polymerization system as an isomerization catalyst. The feature of the monomer-isomerization polymerization of DtBM was investigated in detail. The polymer obtained was confirmed to consist of a poly(tert-butoxycarbonylmethylene) structure similar to that from di-tert-butyl fumarate. Subsequent pyrolysis of the resulting polymer at 180°C is a useful route to synthesis of a high molecular weight poly(fumaric acid). © 1993 John Wiley & Sons, Inc.     

Radical polymerization behavior of ethyl ortho-formylphenyl fumarate involving intramolecular hydrogen abstraction

The radical polymerization behavior of ethyl ortho-formyl-phenyl fumarate (EFPF) using dimethyl 2,2′-azobisisobutyrate (MAIB) as initiator was studied in benzene kinetically and ESR spectroscopically. The polymerization rate (R_p) at 60°C was given by R_p = k[MAIB]^0.76[EFPF]^0.56. The number-average molecular weight of poly(EFPF) was in the range of 1600–2900. EFPF was also easily photopolymerized at room temperature without any photosensitizer probably because of the photosensitivity of the formyl group of monomer. Analysis of ¹H? and ¹³C-NMR spectra of the resulting polymer revealed that the radical polymerization of EFPF proceeds in a complicated manner involving vinyl addition and intramolecular hydrogen-abstraction. The polymerization system was found to involve ESR-observable poly(EFPF) radicals under the actual polymerization conditions. ESR-determined rate constant (2.4–4.0 L/mol s) of propagation at 60°C increased with decreasing monomer concentration, which is mainly responsible for the observed low de-pendency of R_p on the EFPF concentration. Copolymerizations of EFPF with some vinyl monomers were also examined. © 1995 John Wiley & Sons, Inc.     

Radical polymerization and copolymerization reactivities of fumarates bearing different alkyl ester groups

Radical polymerization of fumarates bearing different alkyl ester groups (DRF) on the same molecules was investigated. In bulk polymerization of DRF at 60°C initiated with 2,2′-azobis(isobutyronitrile), it was confirmed that the polymerization reactivity depended on the structures of both alkyl ester groups. The introduction of bulky alkyl groups increased the polymerization rate and molecular weight of the polymer because of retardation of bimolecular termination rates. The effect of the ester substituents on the termination was examined by electron spin resonance spectroscopy. The copolymerization reactivities of DRF with styrene were also investigated. © 1993 John Wiley & Sons, Inc.     

Radical polymerization behavior of N-vinylsaccharin

Synthesis and radical polymerization behavior of N-vinylsaccharin (1) are described. Radical homopolymerization of 1 was carried out in the presence of a radical initiator for 24 h to afford the polymer containing a saccharin moiety in the side group, which was insoluble in common organic solvents. Among the copolymers of 1 with various vinyl monomers such as vinyl acetate (VAc), methyl acrylate (MA), acrylonitrile (AN), and styrene (St), only the copolymer [copoly(1-St)] obtained from 1 and St was soluble in common organic solvents. In the copolymerization of 1 and St, the Q and e values of 1 were estimated to be 0.10 and −1.60, respectively. These values are similar to those of N-vinylphthalimide (Q = 0.36, e = −1.52). The reaction of copoly(1-St) with LiAlH₄ was carried out in THF for 24 h to convert the saccharin moiety into the ring-opened structure bearing hydroxy and sulfonamide groups. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3419–3426, 1999     

苯乙烯与富马酸二甲酯的原子转移自由基无规共聚

2-溴丙酸乙酯(EBP)为引发剂,CuBr为催化剂,N,N,N′,N″,N″-五甲基二亚乙基三胺(PMDETA)为配位剂的富马酸二甲酯(DMF)与苯乙烯(St)的原子转移自由基无规共聚合,转化率低于60％时,1n([M]0／[M])随聚合时间线性增加,数均分子量(Mn)随转化率性增长,所得聚合物分子量分布(PDI)较窄。根据元素分析所得共聚物的平均组成,由Kelerr—Tudos方程,计算两种共聚单体的竞聚率分别是rst=0．488,rDMF=0．303。并探讨了单体与引发剂配比以及温度对聚合反应的影响。     

Polymerization of N-alkyl-substituted itaconimides and N-(alkyl-substituted phenyl)itaconimides and characterization of the resulting polymers

N-alkyl-substituted itaconimides (RII) and N-(alkyl-substituted phenyl)itaconimides (RPhII) with various alkyl substituents were prepared and polymerized in the presence of a radical or anionic initiator to give high molecular weight polymers in high yields. The effects of the alkyl substituents on the polymerization reactivities were investigated. It has been revealed that RII and RPhII have the highest polymerization reactivity compared with other itaconic and citraconic derivatives including dialkyl itaconates and citraconimides. The structure and some properties of poly(RII) and poly(RPhII) were examined. These polymers were found to have excellent thermal stability, better than poly (dialkyl itaconate)s. © 1994 John Wiley & Sons, Inc.     

Radical polymerization behavior of a vinyl monomer bearing five‐membered cyclic carbonate structure and reactions of the obtained polymers with amines

Radical polymerization behavior of a vinyl substituted cyclic carbonate, 4‐phenyl‐5‐vinyl‐1,3‐dioxoran‐2‐one ( 1 ), is described. Radical polymerization of 1 proceeded through selective vinyl polymerization to produce polymers bearing carbonate groups in the side chain, in contrast to that of an oxirane analogue of 1 , 1‐phenyl‐2‐vinyl oxirane that proceeds via the selective ring‐opening fashion. Although the homopolymerization of 1 produce polymers in relatively lower yield, copolymerizations effectively provided cyclic carbonate‐containing copolymers. Nucleophilic addition of primary amines to the resulting homopolymers and copolymers produced the corresponding multifunctional polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 584–592, 2005     

Synthesis and radical polymerization of dissymmetric fumarates with alkoxyethyl and bulky siloxy groups

Novel dissymmetric fumarate monomers ( 1a – c ) having both an alkoxyethyl group such as 2‐methoxyethyl ( a ), 2‐(2‐methoxyethoxy)ethyl ( b ), and 2‐(2‐(2‐methoxyethoxy)ethoxy)ethyl ( c ) and a bulky 3‐[tris(trimethylsiloxy)silyl]propyl group were synthesized successfully, and their radical homopolymerizations and copolymerizations with styrene (St) were investigated. Monomer reactivities of the 1a – c in homopolymerizations were enhanced with an increase in the length of alkoxyethyl chains. The enhancement in the reactivity was explained with the suppression of the termination reaction, resulting from the increased steric hindrance induced by an increase in the size of alkoxyethyl chains. Copolymerizations of the 1a – c with St were carried out in bulk in the presence of AIBN at 60 °C, and their copolymerizations proceeded in a highly alternating tendency regardless of alkoxyethyl chain lengths. The Q, e values of the 1a – c were obtained as 0.48, +1.55 for the 1a , 0.66, +1.16 for the 1b , and 0.60, +1.16 for the 1c , respectively, from the terminal model reactivity ratios, and the 1a – c were found to be conjugative, electron‐accepting monomers. Membranes containing the 1a unit, prepared by the copolymerization of 1a with N‐vinylpyrrolidone (NVP) and terpolymerization of 1a , NVP, and 2‐hydroxyethyl methacrylate, have higher oxygen permeability than those containing no 1a unit, and also they have much better transparency compared with the membranes containing 3‐[tris(trimethylsilyloxy)silyl]propyl methacrylate unit. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 420–433, 2009     

Radical polymerization of ortho-(1,3-dioxolan-2-yl)phenyl ethyl fumarate involving intramolecular hydrogen abstraction and ring opening of cyclic acetal

The polymerization of o-(1,3-dioxolan-2-yl)phenyl ethyl fumarate (DOPEF) initiated with dimethyl 2,2′-azobisiso-butyrate (MAIB) was studied kinetically in benzene. The polymerization rate (R_p) at 60°C was given by R_p = k [MAIB]^0.76 [DOPEF]^0.71. The overall activation energy of polymerization was calculated to be 98.3 kJ/mol. The number-average molecular weight of resulting poly(DOPEF) was in the range of 1000–3100. ¹H- and ¹³C-NMR spectra of resulting polymers revealed that the radical polymerization of DOPEF proceeds in a complicated manner involving vinyl addition, intramolecular hydrogen abstraction, and further ring opening of the cyclic acetal at higher temperatures. From the copolymerization of DOPEF (M₁) and styrene (St) (M₂) at 60°C, the monomer reactivity ratios were obtained to be r₁ = 0.02 and r₂ = 0.20, the values of which are similar to those of the copolymerization of ethyl o-formylphenyl fumarate and St. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 563–572, 1998     

Radical ring-opening polymerization of lipoates: Kinetic and thermodynamic aspects

The radical ring-opening polymerization of a lipoate-based monomer, ethyl lipoate, in bulk and in solution was studied at various temperatures and it was found that in all cases, only limited (plateau) conversions were reached, which were lower at higher temperatures and/or at higher dilutions. It was established that a monomer-polymer equilibrium exists with a corresponding ceiling temperature of 139°C. Due to the reversibility of the lipoate polymerization, when poly(ethyl lipoate) was heated to 150°C, it degraded and within 3 h, the molecular weight decreased to less than 15% of the initial value. Likewise, when the polymer was dissolved in anisole and a radical initiator was added, degradation was observed even at 60°C and it became increasingly pronounced at higher concentrations of the radical source. Due to the presence of multiple disulfide groups in the backbone, poly(ethyl lipoate) also degraded in the presence of reducing agents, such as tributylphosphine, yielding the reduced (dithiol) form of the monomer, ethyl dihydrolipoate.     

Radical copolymerization of N-alkylmaleimides with isobutene and the properties of the resulting alternating copolymers

Radical copolymerization of N-methylmaleimide (MeMI) as well as other N-alkylmaleimides (RMI) and isobutene (IB) was carried out with 2,2′-azobis(isobutyronitrile) as an initiator at 60°C. The initial rate of the copolymerization (R_p) was dependent on the monomer composition and was maximum at the 40 mol % of MeMI in the feed. A solvent effect on the R_p and the monomer reactivity ratio was observed in this copolymerization system, i.e., copolymerization in chloroform produced a higher R_p and an alternating tendency compared with those in dioxane (r_MeMI = 0.14, r_1B = 0 in chloroform and r_MeMI = 0.47, r_1B = 0 in dioxane). The alternating copolymer of RMI and IB shows a high glass transition temperature (T_g) and excellent thermal stability, e.g., the T_g and the thermal decomposition temperature (T_d) were 152 and 363°C, respectively, for the alternating copolymer of MeMI and IB. Both the T_g and T_d increased as the concentration of the MeMI unit in the copolymers increased. Colorless transparent sheets were obtained from press molding the alternating copolymers. They showed excellent mechanical and optical properties. © 1996 John Wiley & Sons, Inc.     

Radical polymerization of vinyl monomers initiated by a mono-captodatively substituted ethane

Homopolymerization of styrene and methyl methacrylate was carried out at 60–130°C in the presence of a mono-captodatively (cd) substituted ethane bearing nitrile and ethylsulfenyl substituents on the same carbon atom. It was found that the cd-ethane accelerated both styrene and methyl methacrylate polymerizations with no induction period, but the polymerization mode of methyl methacrylate was different from that of styrene. The polymerization rate of styrene was proportional to the 0.46th power of the cd-ethane concentration. However, the cd-ethane produced a reversible radical termination in the case of methyl methacrylate. The mechanism of both polymerizations is discussed in terms of the kinetic and ESR data. © 1996 John Wiley & Sons, Inc.     

Laccase‐catalyzed polymerization of lignocatechol and affinity on proteins of resulting polymers

For the synthesis of a new biologically functional polymer from a natural resource by an environment‐friendly method, the laccase‐catalyzed polymerization of a lignin‐based macromonomer, lignocatechol, was carried out for the first time in ethanol–phosphate buffer solvent system to give crosslinked polymers in good yields. Lignocatechol was prepared by the phase separation system of lignin and catechol in aqueous sulfuric acid. The copolymerization was also performed with urushiol to afford the corresponding copolymers in high yields. The polymerization mechanism was estimated by the IR and pyrolysis GC‐MS measurements, suggesting that the polymerization proceeded mainly at the catechol ring through a quinone radical intermediate. The thermal properties were measured by the DSC, TG, and TMA analyses, indicating that the polymers had high thermal stabilities because of the crosslinked structures. In addition, it was found that the resulting polymers had the affinity of bovine serum albumin (BSA) and glucoamylase. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 824–832, 2009     

Radical polymerization of N-substituted itaconamic esters and itaconamides

Two kinds of itaconamic esters, α-substituted acrylate derivatives (IAE-I) and α-substituted acrylamide derivatives (IAE-II), as well as itaconamides (IAm) were prepared and polymerized with a radical initiator. It has been revealed that N,N-disubstituted IAE-I as an acrylate is more reactive in polymerization than N,N-disubstituted IAE-II as an acrylamide and that N,N′-dialkyl substituted IAm homopolymerizes but N,N,N′,N′;-tetraalkyl substituted one does not. In radical copolymerization with styrene, IAE-I showed a higher polymerization reactivity than IAE-II. The effects of the N-substituents on the polymerization reactivity were discussed on the basis of conformation of the monomers. The polymers obtained were also characterized. © 1994 John Wiley & Sons, Inc.     

Radical polymerization behavior of trimethoxyvinylsilane

Trimethoxyvinylsilane (TMVS) was quantitatively polymerized at 130 °C in bulk, using dicumyl peroxide (DCPO) as initiator. The polymerization of TMVS with DCPO was kinetically studied in dioxane by Fourier transform near‐infrared spectroscopy. The overall activation energy of the bulk polymerization was estimated to be 112 kJ/mol. The initial polymerization rate (R_p) was expressed by R_p = k[DCPO]^0.6[TMVS]^1.0 at 120 °C, being closely similar to that of the conventional radical polymerization involving bimolecular termination. The polymerization system involved electron spin resonance (ESR) spectroscopically observable polymer radicals under the actual polymerization conditions. ESR‐determined apparent rate constants of propagation and termination were 13 L/mol s and 3.1 × 10⁴ L/mol s at 120 °C, respectively. The molecular weight of the resulting poly(TMVS)s was low (M_n = 2.0–4.4 × 10³), because of the high chain transfer constant (C_mtr = 4.2 × 10^?2 at 120 °C) to the monomer. The bulk copolymerization of TMVS (M₁) and vinyl acetate (M₂) at 120 °C gave the following copolymerization parameters: r_l = 1.4, r₂ = 0.24, Q₁ = 0.084, and e₁ = +0.80. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5864–5871, 2005     

Kinetics and mechanism of the thermal degradation for the synthesis of poly(norbornene sulfone)s by two different polymerization methods

The recent development of sulfur dioxide (SO₂) polymerization has seen a renaissance in its chemistry, especially poly(olefin sulfone)s from the copolymerization of SO₂, and unsaturated hydrocarbons can be found to have many applications, including transient electronic packaging, drug delivery, and electron beam‐resistant materials. In this work, a type of functional poly(norbornene sulfone) was synthesized via two different polymerization methods. Aiming to understanding the effects of different polymerization methods on poly(olefin sulfone)s and gain further understanding on the kinetics of poly(olefin sulfone)s's thermal instability, we investigated their detailed thermal degradation behaviors using thermogravimetry and analyzed the resultant kinetics in accordance with three kinetic models. The results supported the conclusion that although the poly(norbornene sulfone)s obtained have different activation energy, the thermal degradation kinetics are the same and also obey the D_n type. Copyright © 2017 John Wiley & Sons, Ltd.     

Hybrid miniemulsion polymerization of acrylic/alkyd systems and characterization of the resulting polymers

The hybrid miniemulsion polymerization of acrylates in the presence of alkyd resin was carried out. The polymers obtained were characterized via gel permeation chromatography, carbon nuclear magnetic resonance, and differential scanning calorimetry analysis and selective extraction; they had a quite broad molecular weight distribution. The double bonds that served as grafting sites of the alkyd onto the polyacrylate were mostly those near acid groups. The final product contained some free alkyd and some free polyacrylate, but the predominant form was poly(acrylate-graft-alkyd). This confirmed that monomer droplet nucleation is the predominant nucleation mechanism for this hybrid miniemulsion polymerization system. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4159–4168, 1999     

Radical polymerization in the presence of peroxide and reducing agent monomer for branched polymers

In this article, we report the radical polymerization in the presence of peroxide and commercially available or designed reducing agent monomer (RAM) for the preparation of branched poly(methyl methacrylate)s (PMMAs). The reaction behavior of the RAM was studied by NMR. Triple‐detection SEC (TD‐SEC) analysis was used to confirm the branching structure of the prepared PMMAs and to investigate the influence of peroxide concentration and RAM concentration on molecular weight and branched structure. The obtained branched PMMAs exhibited high molecular weights and relatively narrow polydispersities at high conversion of MMA. Interestingly, a significant increase in molecular weight and degree of branching of the obtained polymers are observed in higher BPO concentration, these results are quite different from that reported in the literature. The unique radical polymerization mechanism in the RAM/BPO redox‐initiated radical polymerization system resulted in branched PMMAs with high molecular weights at relatively high RAM and BPO concentrations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 833–840     

Synthesis of substituted polymethylenes by radical polymerization of alkyl N,N-dialkylfumaramates and maleamates: Relative reactivity of the isomers

Bulk polymerization of alkyl N,N-dialkylfumaramates (FAE) and maleamates (MAE) was performed in the presence of a radical initiator. It has been found that FAE is more reactive than MAE when the reactivity of the two geometrical isomers was compared for their homo- and copolymerizations. From investigation on the effect of ester and N-substituents of these monomers, it has been found that the isopropyl ester shows a higher reactivity than the methyl ester and that N-ethyl and n-butyl substitution gives polymers with high molecular weight of more than several thousands. The resulting substituted polymethylenes from FAE and MAE were characterized and compared with each other. The isomerization of MAE to FAE with morpholine as an isomerization catalyst and monomer-isomerization radical polymerization were also investigated.     

Kinetic and ESR studies on radical copolymerization of p-tert-butoxystyrene and di-n-butyl maleate in benzene

The copolymerization of p-tert-butoxystyrene (TBOSt) (M₁) and di-n-butyl maleate (DBM) (M₂) with dimethyl 2,2′-azobisisobutyrate (MAIB) in benzene at 60°C was studied kinetically and by means of ESR spectroscopy. The monomer reactivity ratios were determined to be r₁ = 2.3 and r₂ = 0 by a curve-fitting method. The copolymerization system was found to involve ESR-observable propagating polymer radicals under practical copolymerization conditions. The apparent rate constants of propagation (k_p) and termination (k_t) at different feed compositions were determined by ESR. From the relationship of k_p and f₁ (f₁ = [M₁]/([M₁] + [M₂])) based on a penultimate model, the rate constants of five propagations of copolymerization were evaluated as follows; k₁₁₁ = 140 L/mol s, k₂₁₁ = 3.5 L/mol s, k₁₁₂ = 61 L/mol s, k₂₁₂ = 1.5 L/mol s, and k₁₂₁ = 69 L/mol s. Thus, a pronounced penultimate effect was predicted in the copolymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1449–1455, 1998