Copolymer Adsorption on Planar Chemically Heterogeneous Substrates: The Interplay between the Monomer Sequence Distribution and Interaction Energies

We use a three‐dimensional self‐consistent field model to study the adsorption of A‐B copolymers from A‐B copolymer/A homopolymer blends on planar substrates comprising two chemically distinct regions C and D. The interplay between the spatial distribution of the surface chemical heterogeneities and the monomer sequence distribution in the copolymer is examined for diblock (A‐B), triblock (A‐B‐A), inverted triblock (B‐A‐B), and alternating (A‐alt‐B) copolymers. Our results demonstrate that when the chemically heterogeneous motifs on the substrate are detected by the copolymer adsorbing segments, the copolymers can transcribe them with high fidelity into three dimensions. The way the surface pattern gets transferred is dictated by the monomer sequence distribution. We show that relative to alternating copolymers, block copolymers are generally better at capturing the chemical pattern shape and transcribing it into the polymer mixture. Moreover, block copolymers with shorter adsorbing blocks are capable of better recognizing the substrate motifs. In order to address the interplay between the monomer sequence distribution in the copolymer and the interaction energies, we systematically vary the repulsion between A and B, and the attraction between B and D. Our calculations reveal that increasing i) the interaction between the copolymer adsorbing segments (B) and the “sticky” points at the substrate (D), and/or ii) the repulsion between the copolymer segments (A and B) increases the total amount of the copolymer adsorbed at the mixture/substrate interface, and decreases (increases) the fidelity of the substrate chemical pattern recognition by compositionally symmetric (asymmetric) copolymers.     

两亲性嵌段聚醚酯在空气-水界面上的Langmuir单分子膜

聚醚酯是一种新型弹性材料,目前已成为工业化产品[1].对这种嵌段聚醚酯的合成和弹性行为[2]、熔体的流变性能[3]、以及纤维在拉伸状态下的聚集态结构和分子运动[4]已有一些报道.     

Monte Carlo Simulations of Copolymer Adsorption at Planar Chemically Patterned Surfaces: Effect of Interfacial Interaction

Summary: Monte Carlo simulation utilizing the bond fluctuation model in conjunction with single and configurational biased Monte Carlo moves is used to study the adsorption of diblock (A‐block‐B) and alternating (A‐alt‐B) copolymers at flat, chemically heterogeneous surfaces comprising C and D domains. The main objective of this work is to address the effect of the strength of attraction between the adsorbing surface domains, D, and the copolymer adsorbing segments, B, on the copolymer's ability to recognize the chemical pattern on the surface. The results of our simulations reveal that both block and alternating copolymers have the ability to recognize the surface motif and transcribe it into the bulk material. The extent to which diblock copolymers transfer the chemical pattern from the surface to the bulk is relatively unaffected when the attractive B‐D potential is increased beyond a certain critical value. This behavior stems from the brush‐like conformation adopted by the diblock copolymer at the substrate. In contrast to the diblock copolymer, the adsorption of the alternating copolymer is influenced by the strength of the attraction between the copolymer's adsorbing segments and the adsorbing domains on the surface. Since the B segments are distributed evenly along the backbone, the alternating copolymers are more likely to adopt conformations in which the whole chain is “zipped” to the surface. The resultant entropic frustration is then alleviated through an increased formation of loops with little change to their length. Such conformational changes endow the alternating copolymer with the ability to invert the substrate pattern as the distance away from the surface is increased.

     

Dissipative particle dynamics study on the interfaces in incompatible A/B homopolymer blends and with their block copolymers

Dissipative particle dynamics, a simulation technique appropriate at mesoscopic scales, has been applied to investigate the interfaces in immiscible binary A/B homopolymer blends and in the ternary systems with their block copolymers. For the binary blends, the interfacial tension increases and the interface thickness decreases with increasing Flory-Huggins interaction parameter chi while the homopolymer chain length is fixed. However, when the chi parameter and one of the homopolymer chain length is fixed, increasing another homopolymer chain length will induce only a small increase on interfacial tension and slight decrease on interface thickness. For the ternary blends, adding the A-b-B block copolymer will reduce the interfacial tension. When the mole number of the block copolymer is fixed, longer block chains have higher efficiency on reducing the interfacial tension than the shorter ones. But for the block copolymers with fixed volume fraction, shorter chains will be more efficient than the longer ones on reducing the interfacial tension. Increasing the block copolymer concentration reduces interfacial tension. This effect is more prominent for shorter block copolymer chains.     

Synthesis and Surface Tension Properties of Polyethyleneimine—Polyethylene Oxide Block Copolymers

IntroductionInrecentyearstherehavebeenincreasingactivitiesinblockcopolymersynthesisandcharacterization .Manystudieshaveshownthatblockcopolymersformmicellesofcloseasso ciationupondissolutionintoaselectivesolvent,whichactsthermodynamicallyasagoodsolventforoneblockandapoorsolventfortheotherblock .1Theimportanceofthesesyntheticactivitieshasbeenemphasizedbyblockcopolymermicelles ,whichhavebeendemonstratedaspotentialdrugcarriers,2 ,3andotherinvestigationshaverevealedtheirexcellentutilityincancerchem…     

Surface characterization of poly(L-lactic acid)-methoxy poly(ethylene glycol) diblock copolymers by static and dynamic contact angle measurements, FTIR, and ATR-FTIR

The surface composition and surface free energy properties of two types of amphiphilic and semicrystalline diblock copolymers consisting of poly(L-lactic acid) coupled to (methoxy poly(ethylene glycol) (PLLA-MePEG) having differing block lengths of PEG were investigated by using static and dynamic contact angle measurements, transmission Fourier infrared spectroscopy (FTIR), and attenuated total reflection spectroscopy (ATR-FTIR) and compared with results obtained from PLLA and MePEG homopolymers. The contact angle results were evaluated by using the van Oss-Good method (acid-base method), and it was determined that the Lewis base surface tension coefficient (gamma-) of the copolymers increased with an increase of the PEG molar content at the copolymer surface. This result is in good agreement with the transmission FTIR and ATR-FTIR results but not proportional to them, indicating that the surfaces of the copolymers are highly mobile and that the molecular rearrangement takes place upon contact with a polar liquid drop. The dynamic contact angle measurements showed that the strong acid-base interaction between the oxygen atoms in the copolymer backbone of the relatively more hydrophilic PEG segments with the Lewis acidic groups of the polar and hydrogen-bonding water molecules enabled the surface molecules to restructure (conformational change) at the contact area, so that the PEG segments moved upward, whereas the apolar methyl pendant groups of PLLA segments buried downward.     

Composition and solution properties of fluorinated block copolymers and their surface structures in the solid state

A series of diblock copolymers composed of methyl methacrylate and 2-perfluorooctylethyl methacrylate (PMMA₁₄₄-b-PFMA _n ) with various PFMA block lengths were prepared by atom transfer radical polymerization (ATRP). The surface structures and properties of these polymers in the solid state and in solution were investigated using contact angle measurement, X-ray photoelectron spectroscopy (XPS), sum frequency generation (SFG) vibrational spectroscopy, surface tension and dynamic laser light scattering (DLS). It was found that with increasing PFMA block length, water and oil repellency decreased, the ratio of F/C increased with increasing film depth, and the degree of ordered packing of the perfluoroalkyl side chains at the surface decreased. When the number of PFMA block units reached 10, PMMA segments were detected at the copolymer surface, which was attributed to the PFMA block length affecting molecular aggregation structure of the copolymer in the solution and the interfacial structure at the air/liquid interface, which in turn affects surface structure formation during solution solidification. The results suggest that copolymer solution properties play an important role in structure formation on the solid surface. Supported by the National Natural Science Foundation of China (Grant Nos. 50573069 and 20704038) and Program for Changjiang Scholars and Innovative Research Team in University (Grant No.IRT 0654)     

Robust control of microdomain orientation in thin films of block copolymers by zone casting

Block copolymers with chemically immiscible segments exhibit a variety of microphase-separated nanostructures on the scale of 10-100 nm. Controlling the orientation of these microphase separated nanostructures is vital in many applications such as lithography, membranes, data storage, and so forth. Typical strategies involve the use of external fields or patterned substrates. Here, we report a robust zone casting technique to achieve highly ordered thin films of block copolymers on centimeter-scale substrates. The robustness of this technique is its powerful control on diverse morphologies and exceptional tolerance on versatility of block copolymer chemistry as well as allowance of a wide spectrum of substrates. We demonstrate that perpendicular orientations with respect to the surface are achieved for block copolymers with both lamellar and cylindrical morphologies by controlling solution casting rate, temperatures, and block copolymer chemical structures. Thin films of both noncrystalline and crystalline block copolymers exhibit excellent orientational order and lateral order. However, the lateral order in the thin films of crystalline block copolymers shows dependence on casting temperature and melting temperature of the crystalline segment. Remarkably, all the ordering is independent of the substrates on which the block copolymer films are cast.     

Surface properties of styrene–ethylene oxide block copolymers

Hydrophobic–hydrophilic block copolymers were prepared by “living” anionic polymerization. They consist of polystyrene and poly(ethylene oxide) blocks, and are soluble in water. Their interfacial properties were investigated, employing aqueous solutions. The block copolymers lowered the surface tension of water in analogy with the low molecular weight surfactants such as sodium lauryl sulfate and heptaethylene oxide n-dodecyl ether. Their aqueous solutions exhibited solubilization properties differing from those of polyethylene glycol. Therefore, it is thought that the polystyrene blocks produce solubilization phenomena. In samples of the same styrene content, the precipitation temperature of a high molecular weight copolymer in water was lower than that of a low molecular weight copolymer at the same concentration in the same solvent. The surface tension and precipitation temperature of aqueous solutions seem to be influenced by molecular weight and composition.     

Surface-induced phase transitions in ultrathin films of block copolymers

We study theoretically the lamellar-disorder-lamellar phase transitions of AB diblock and tetrablock copolymers confined in symmetric slitlike pores where the planar surface discriminatingly adsorbs A segments but repels B segments, mimicking the hydrophobic/hydrophilic effects that have been recently utilized for the fabrication of environmentally responsive "smart" materials. The effects of film thickness, polymer volume fraction, and backbone structure on the surface morphology have been investigated using a polymer density-functional theory. The surface-induced phase transition is manifested itself in a discontinuous switch of microdomains or a jump in the surface density dictated by the competition of surface adsorption and self-aggregation of the block copolymers. The surface-induced first-order phase transition is starkly different from the thickness-induced symmetric-asymmetric or horizontal-vertical transitions in thin films of copolymer melts reported earlier.     

Interfacial tension of evaporating emulsion droplets containing amphiphilic block copolymers: effects of solvent and polymer composition

Evaporating droplets of volatile organic solvent containing amphiphilic block copolymers may undergo hydrodynamic instabilities that lead to dispersal of copolymer micelles into the surrounding aqueous phase. As for related phenomena in reactive polymer blends and oil/water/surfactant systems, this process has been ascribed to a nearly vanishing or transiently negative interfacial tension between the water and solvent phases induced by adsorption of copolymer to the interface. In this report, we investigate the influence of the choice of organic solvent and polymer composition for a series of polystyrene-b-poly(ethylene oxide) (PS-PEO) diblock copolymers, by in situ micropipette tensiometry on evaporating emulsion drops. These measurements suggest that the sensitivity to the organic solvent chosen reflects both differences in the bare solvent/water interfacial tension as well as the propensity of the copolymer to aggregate within the organic phase. While instabilities coincident with an approach of the interfacial tension nearly to zero were observed only for copolymers with PEO content greater than 15 wt.%, beyond this point the interfacial behavior and critical concentration needed to trigger surface instability were found to depend only weakly on copolymer composition.     

高分子表面活性剂P(AM-co-OPMA)的合成与表征

辛基酚聚氧乙烯醚(10)(OP-10)与马来酸酐在95℃下反应,合成了辛基酚聚氧乙烯醚马来酸单酯(OPMA);并在水溶液中与丙烯酰胺(AM)单体进行共聚合,获得了高分子表面活性剂P(AM-co-OPMA);考察了引发剂用量、单体组成、单体总浓度及反应温度对共聚物特性粘数与阴离子度的影响.通过红外光谱、紫外光谱、荧光发射光谱和电导滴定对共聚物结构和组成进行了表征;利用视频光学接触角测量仪分别测定了共聚物表面和界面张力.结果表明,在聚丙烯酰胺分子主链上引入OPMA链节后,不仅保持了PAM优良的增稠能力(特性粘数达764.31 mL/g),且赋予了共聚物较高的表面活性(浓度为1.5 g/L共聚物水溶液的表面和界面张力分别可达53.94 mN/m和5.41 mN/m).     

Supramolecular structures from self-assembled poly(γ-benzyl-l-glutamate)-polydimethylsiloxane-poly(γ-benzyl-l-glutamate) triblock copolypeptides in thin films

We describe the self-assembly of A-B-A triblock copolymers in thin films composed of a soft polydimethylsiloxane (PDMS) central block (B) and two polypeptidic (A) blocks, poly(γ-benzyl)-l-glutamate (PBLG). The PBLG segment exhibits depending on the chain length two distinct secondary conformations either a β-sheet or a α-helical conformation. The direct relationship between the surface morphology and the secondary conformation of the polypeptide segment has been evidenced by atomic force microscopy. For chain lengths below 20 U the polypeptide segments adopt preferentially a β-sheet secondary structure and the triblock copolymer self-assembled in fibers. Moreover, the fiber diameters increased with the chain length of the triblock copolymer. For chain lengths above 20, the α-helical structure is stabilized and a lamellar morphology is formed driven by rod-rod interactions in spite of the very asymmetric composition of the triblock copolymer. However, decreasing the film thickness from 25 to 8 nm, i.e., below the L/2 and due to the preferential attraction of the polypeptide block for the hydrophilic substrate employed, instead of a lamellar morphology a rod-like morphology could be found. Thus, the use of hybrid block copolymer containing polypeptides with particular secondary structures offers novel alternatives to control the self-assembly in thin films compared to traditional amorphous block copolymers.     

New amphiphilic diblock copolymers: surfactant properties and solubilization in their micelles

Several series of amphiphilic diblock copolymers are investigated as macrosurfactants in comparison to reference low-molar-mass and polymeric surfactants. The various copolymers share poly(butyl acrylate) as a common hydrophobic block but are distinguished by six different hydrophilic blocks (one anionic, one cationic, and four nonionic hydrophilic blocks) with various compositions. Dynamic light scattering experiments indicate the presence of micelles over the whole concentration range from 10(-4) to 10 g x L(-1). Accordingly, the critical micellization concentrations are very low. Still, the surface tension of aqueous solutions of block copolymers decreases slowly but continuously with increasing concentration, without exhibiting a plateau. The longer the hydrophobic block, the shorter the hydrophilic block, and the less hydrophilic the monomer of the hydrophilic block is, the lower the surface tension is. However, the effects are small, and the copolymers reduce the surface tension much less than standard low-molar-mass surfactants. Also, the copolymers foam much less and even act as anti-foaming agents in classical foaming systems composed of standard surfactants. The copolymers stabilize O/W emulsions made of methyl palmitate as equally well as standard surfactants but are less efficient for O/W emulsions made of tributyrine. However, the copolymer micelles exhibit a high solubilization power for hydrophobic dyes, probably at their core-corona interface, in dependence on the initial geometry of the micelles and the composition of the block copolymers. Whereas micelles of copolymers with strongly hydrophilic blocks are stable upon solubilization, solubilization-induced micellar growth is observed for copolymers with moderately hydrophilic blocks.     

Poly(styrene/pentafluorostyrene)-block-poly(vinyl alcohol/vinylpyrrolidone) amphiphilic block copolymers for kinetic gas hydrate inhibitors: Synthesis,micellization behavior,and methane hydrate kinetic inhibition

Amphiphilic block copolymers of short poly(styrene) (PS) or poly(2,3,4,5,6-pentafluorostyrene) (PPFS) segments with comparatively longer poly(vinyl acetate) or poly(vinylpyrrolidone) (PVP) segments are synthesized using a 2-cyanopropan-2-yl N-methyl-N-(pyridin-4-yl)dithiocarbamate switchable reversible addition–fragmentation chain transfer (RAFT) agent toward application as kinetic gas hydrate inhibitors (KHIs). Polymerization conditions are optimized to provide water-soluble block copolymers by first polymerizing more activated monomers such as S and PFS to form a defined macro chain-transfer agent (linear degree of polymerization with conversion, comparatively low dispersity) followed by chain extensions with less activated monomers VAc or VP by switching to the deprotonated form of the RAFT agent. The critical micelle concentrations of these amphiphilic block copolymers (after VAc unit hydrolysis to vinyl alcohol units) are measured using zeta surface potential measurements to estimate physical behavior once mixed with the hydrates. A PS-poly(vinyl alcohol) block copolymer improved inhibition to 49% compared to the pure methane–water system with no KHIs. This inhibition was further reduced by 27% by substituting the PS with a more hydrophobic PPFS. A block copolymer of PS–PVP exhibited 20% greater inhibition than the PVP homopolymer and substituting PS with a more hydrophobic PPFS resulted in a 35% further decreased in methane KHI. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2445–2457, 56, 2445–2457     

Amphiphilic block and statistical siloxane copolymers with antimicrobial activity

Statistical and block all‐siloxane copolymers containing quaternary ammonium salt (QAS) groups with biocidal activity as lateral substituents were synthesized as models for the study of the effect of the arrangement of the QAS groups in the copolymer chain on their antimicrobial activity. The bioactive siloxane unit was [3‐n‐octyldimethylammoniopropyl]methylsiloxane, and the neutral unit was dimethylsiloxane. The copolymers also contained siloxane units with unreacted precursor 3‐chloropropyl or 3‐bromopropyl groups. A small number of units containing highly hydrophilic 3‐(3‐hydroxypropyl‐dimethylammonio)propyl groups were introduced to increase the solubility of the copolymers in water. The bioactive and bioneutral units were arranged in the polymer chain either in blocks or in statistical order. The block copolymers differed in the number and length of segments. The copolymers were obtained by the quaternization of tertiary amines by chloropropyl or bromopropyl groups attached to polysiloxane chains. The arrangement of the bioactive groups was controlled by the arrangement of the halogenopropyl groups in the bioactive copolymer precursor. All model siloxane copolymers showed high bactericidal activity in a water solution toward the gram‐negative bacteria Escherichia coli and the gram‐positive bacteria Staphylococcus aureus. However, no essential differences in the activities of the copolymers with block and statistical arrangements of units were detected. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2939–2948, 2003     

Synthesis and characterization of ABA triblock copolymers containing poly(2,6-dimethyl-1,4-phenylene oxide) as A blocks and tetramethyl bisphenol-A polysulfone as B blocks

α, β-Bis(hydroxyphenol) tetramethyl bisphenol-A polysulfone (PSUT) was synthesized by two different methods, one using a strong base, the other using a weak base. The bifunctional polysulfone containing tetramethyl bisphenol-A chain ends was exploited as a model telechelic that can be used for the preparation of ABA triblock copolymers containing poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) as A segments and PSUT as B segments. PSUT and PPO were incorporated into triblock copolymers by an oxidative coupling copolymerization of PSUT with 2,6-dimethylphenol or by the redistribution of PPO in the presence of PSUT. The mechanism of block copolymerization is discussed. DSC studies indicate that short immiscible PPO and PSUT segments incorporated into a triblock copolymer do not exhibit phase separation. Polymer blends of the PPO–PSUT–PPO triblock copolymers with PPO homopolymer were analyzed by DSC. Both miscible and phase-separated blends can be prepared depending on the molecular weight of both PPO homopolymer and of the PPO segment present in the triblock copolymer. Polymer blends of the PPO–PSUT–PPO triblock copolymer with PSUT were miscible at all compositions.     

The surface tension of aqueous poly(N-isopropylacrylamide-co-acrylamide)

A series of poly(N-isopropylacrylamide-co-acrylamide) copolymers with N-isopropylacrylamide (NIPAM) to acrylamide (AM) ratios varying from 95/05 to 10/90 was synthesized and surface tensions, cloud point temperatures, and enthalpies of phase separation were measured. At 25°C, 1 wt % poly(N-isopropylacrylamide) homopolymer has a surface tension of 41.8 mJ/m². Incorporation of AM moieties in the copolymer increased surface tension approaching the limiting value of 65.3 mJ/m² which was obtained for polyacrylamide solutions. The surface tension values of copolymer solutions were predicted from the surface tensions of the homopolymers applied to a one-parameter model analogous to the Margules model for the excess free energy of mixing. Heats of phase separation for the copolymer were less than expected compared with PNIPAM homopolymer. It was proposed that NIPAM moieties directly bonded to acrylamide did not contribute to the enthalpy of phase separation. Finally, surface tension lowering kinetics were slower above the cloud point temperatures because at high temperatures the copolymers were present as colloidally dispersed particles which had to diffuse to the air/water interface, unwrap, and spread to give an adsorbed monolayer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2137–2143, 1999     

Star-shaped block copolymers. III. Surface and interfacial properties

Surface and interfacial activities of A(B)₂ star-shaped block copolymers, where B is a polyoxirane block and A a polydiene or polyvinyl block, have been measured at 20°C. The surface tension of organic solvents is only slightly lowered by these copolymers, whereas a significant surface activity is noted in water. Interfacial tensions are dependent on both the nature of the organic solvent (aliphatic or aromatic hydrocarbons) and the molecular parameters of the copolymers; 50% polyoxirane seems to be the composition of maximum surface activity. The role played by the molecular architecture [A-B or A(B)₂] of the copolymers is demonstrated. The same limiting interfacial tension is obtained on increasing the concentration of diblock [A-B] or star-shaped block [A(B)₂] copolymer. The limiting value is, however, attained at significantly lower concentration with the star-shaped copolymers. Their ability to fill the interface is accordingly higher.     

Phase behavior and interfacial properties of diblock copolymer-homopolymer ternary mixtures: Influence of volume fraction of copolymers and interaction energy

We use a Monte Carlo method to study the phase and interfacial behaviors of A-b-B diblocks in a blend of homopolymers, A and B, which are confined between two asymmetric hard and impenetrable walls. Our results show that, when the interaction strength is weak, the block copolymersare uniformly distributed in the ternary mixtures under considered concentrations. Under strong interaction strength, distribution region of the block copolymers changes from a single smooth interface to a curved interface or multi-layer interface in the ternary mixtures. Furthermore, our findings show that with increasing volume fraction of A-b-B diblock copolymer(фC), copolymer profiles broaden while фC≥ 0.4, a lamellar phase is formed and by further increasing фC, more thinner layers are observed. Moreover, the results show that, with the increase of фC, the phase interface first gradually transforms from plane to a curved surface rather than micelle or lamellar phase while with the increase of the interaction between A and B segments(ε_(AB)), the copolymer chains not only get stretched in the direction perpendicular to the interface, but also are oriented. The simulations also revealthat the difference between symmetric and asymmetric copolymers is negligible in statistics if the lengths of two blocksare comparable.