固定床反应器上挤条小晶粒TS-1催化丙烯环氧化反应

采用纳米TS-1母液作为晶种, 在四丙基溴化铵(TPABr)-乙胺廉价水热体系中, 合成出晶粒尺寸为600 nm×400 nm×250 nm的小晶粒钛硅分子筛(TS-1), 用挤条法将其成型, 得到的挤条小晶粒TS-1被用于催化固定床反应器中的丙烯环氧化反应. 采用X射线衍射(XRD)光谱, 傅里叶变换红外(FT-IR)光谱, 紫外-可见(UV-Vis)漫反射光谱及氮气物理吸附对挤条成型的小晶粒TS-1进行表征, 并对丙烯环氧化的最优反应条件进行考察. 其中所考察的条件包括: 反应温度, 压力, 丙烯/H₂O₂摩尔比(n(C₃H₆)/n(H₂O₂)), 丙烯、甲醇及H₂O₂的质量空速(WHSV), 以及NH₃·H₂O浓度. 在所考察的范围内, 温度对环氧丙烷(PO)收率的影响较小, 当反应压力为2.0 MPa, n(C₃H₆)/n(H₂O₂)为4时, 可以得到最高的PO收率. 当丙烯、甲醇及H₂O₂的空速分别为0.93、2.5及0.25 h^-1时, PO在产物中的含量最高. 较低的NH₃·H₂O浓度对高PO收率更有利. 在优化的反应条件下, 对比不同晶粒大小TS-1的催化性能, 并考察了挤条小晶粒TS-1的长期运转性能, 连续反应1000 h, H₂O₂转化率及PO选择性仍能维持在95%以上.     

基于3，4'，5-联苯三羧酸构筑的钕配合物的合成、结构、荧光、光催化及磁性质

采用NdCl₃·6H₂O和3,4'',5-联苯三羧酸（H₃bpt）为原料在DMF/H₂O混合溶剂热条件下合成得到一个三维钕配合物{[Nd （bpt）（DMF）（H₂O）]·2H₂O}_n（1）,并通过红外光谱、元素分析、单晶及粉末X射线衍射表征了配合物1的结构。单晶衍射结果表明,配合物1具有（5,5）-连接的三维结构,拓扑符号为（4⁴·6³·8³）（4⁸ 6²）。此外,对配合物1的热稳定性、荧光性质、光催化降解染料及磁性质进行了详细研究。     

Carbon Dynamics on the Molybdenum Carbide Surface during Catalytic Propane Dehydrogenation

The effect of the gas‐phase chemical potential on surface chemistry and reactivity of molybdenum carbide has been investigated in catalytic reactions of propane in oxidizing and reducing reactant mixtures by adding H₂, O₂, H₂O, and CO₂ to a C₃H₈/N₂ feed. The balance between surface oxidation state, phase stability, carbon deposition, and the complex reaction network involving dehydrogenation reactions, hydrogenolysis, metathesis, water‐gas shift reaction, hydrogenation, and steam reforming is discussed. Raman spectroscopy and a surface‐sensitive study by means of in situ X‐ray photoelectron spectroscopy evidence that the dynamic formation of surface carbon species under a reducing atmosphere strongly shifts the product spectrum to the C₃‐alkene at the expense of hydrogenolysis products. A similar response of selectivity, which is accompanied by a boost of activity, is observed by tuning the oxidation state of Mo in the presence of mild oxidants, such as H₂O and CO₂, in the feed as well as by V doping. The results obtained allow us to draw a picture of the active catalyst surface and to propose a structure–activity correlation as a map for catalyst optimization.     

ZnII and CdII Metal Organic Frameworks Based on 2-Methyl-6-oxygen-1,6-dihydro-3,4'bipyridine-5-carbonitrile

To investigate the coordination chemistry of modbc (2-methyl-6-oxygen-1,6-dihydro-3,4'-bipyridine-5-carbonitrile) with Zn^II and Cd^II salts under the solvothermal conditions, six new MOFs with the formulas [Zn(modbc)₂(mpa)]_n ( 1 ), [Zn(modbc)(mpa)(H₂O)]_n ( 2 ), [Zn(modbc)(pa)_0.5(H₂O)]_n ( 3 ), [Cd(modbc)(pa)_0.5(H₂O)]_n ( 4 ), [Zn(modbc)₂(tpa)]_n ( 5 ), and [Cd(modbc)₂(pda)(H₂O)]_n ( 6 ) (mpa = m-phthalic acid; pa = pyromellitic acid; tpa = terephthalic acid; pda = pentane diacid) were successfully synthesized by solvothermal reaction and fully characterized by elemental analysis, IR spectroscopy, single crystal, powder X-ray diffraction, thermal and photoluminescence properties. Though MOFs 3 and 4 have the same structure, we have obtained three different kinds of coordination configurations by the X-ray diffration analysis. Compared with 1 and 2 , coordination water has no effect on the solid fluorescence emission of MOFs. It is worth noting that the fluorescence intensity of 3 containing central Zn^II atoms is very strong, whereas that of isomorphism 4 containing central Cd^II atoms has almost no fluorescence emission, showing that metal ions have very important influence on the fluorescence emission. Further, we found that solvents had an important effect on the fluorescence emission in liquid fluorescence of MOFs 1 – 6 .     

Matrix isolation study of the thermal and photochemical reaction of ozone with Trimethyl Indium

The matrix isolation technique has been combined with infrared spectroscopy and theoretical calculations to explore the reaction of (CH₃)₃In with O₃ over a range of time scales. Upon twin jet deposition (short reaction time), formation of the novel H₃COIn(CH₃)₂ species along with a low yield of CH₂O was observed. Subsequent UV irradiation greatly increased the yield of H₃COIn(CH₃)₂ while the intensities of the CH₂O bands were not affected. An extensive set of bands were seen for H₃COIn(CH₃)₂ after irradiation and ¹⁸O spectroscopic data was obtained as well. The identification of this species was supported by theoretical calculations at the B3LYP/lanl2dz and B3LYP/dgdzvp levels of theory. Merged jet deposition (longer reaction times) led to high yield of H₂CO, CH₃OH and C₂H₆, identifications that were confirmed by ¹⁸O substitution. Mechanistic inferences for the initial steps of this reaction are discussed.     

Synthesis, structure and cytotoxicity of diorganotin(IV) complexes of 2,6-lutidine-α,3-diol (Lu): The crystal structures of Lu and [SnMe2(H2O)(Lu-2H)]

The reaction of dimethyl-, diethyl- and dibutyltin(IV) oxide with 2,6-lutidine-α²,3-diol (Lu) [2-(hydroxymethyl)-3-hydroxy-6-methylpyridine] in toluene/ethanol has been investigated. The compounds were isolated and characterized by IR, Raman and Mössbauer spectroscopy, EI and FAB mass spectrometry and ¹H and ¹¹⁹Sn NMR spectroscopy. The structures of Lu and [SnMe₂(H₂O)(Lu-2H)] were determined by X-ray diffraction. The crystal of [SnMe₂(H₂O)(Lu-2H)] contains dimeric [SnMe₂(H₂O)(Lu-2H)]₂ units, in which the tin atom is coordinated to the O atoms of the two deprotonated hydroxymethyl groups and one deprotonated phenolic hydroxyl group. The distorted octahedral coordination polyhedron of each tin atom is completed by a water molecule and two methyl C atoms. The butyl derivative exhibited significant in vitro antitumor activity against the human carcinoma cell lines HeLa-229, A2780 and A2780cis, although minor than that of the pyridoxine derivative prepared previously.     

Synthesis and characterization of metal complexes of Cr(III), Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Ru(III), Rh(III) and Pd(II) with derivatives of 1,3,4-thiadiazole-2,5-dithiol as new ligands

The synthesis of some new transition metal complexes with 1,3,4-thiadiazole-2,5-dithiol derivatives (L₁ and L₂) as new ligands is reported. Each complex was prepared by the reaction of the ligands with the appropriate metal salts (CrCl₃, MnCl₂·4H₂O, FeCl₃, CoCl₂·6H₂O, NiCl₂·6H₂O, CuCl₂·2H₂O, RuCl₃, RhCl₃ and PdCl₂). Elemental micro analysis (C.H.N.), UV–Visible spectroscopy, ¹H NMR, infrared (IR) spectroscopy, atomic absorption, magnetic susceptibility, continuous variation method and molar conductance techniques were used to characterize the structural formulae of these chelate complexes.     

Theoretical study on the hydrolytic deamination reaction mechanism of guanine and (H2O)n

The hydrolytic deamination reaction mechanism of guanine (G) and (H₂O)n (n = 1–4) has been theoretically investigated, including solvent effects at the B3LYP/6-31G (d,p) and MP2/6-311G (d,p) levels. The results show that the hydrolytic deamination reaction of G involves two steps. In the first step, a tetra-coordinated intermediate is generated by a hydrolysis reaction, and then deamination reaction is carried out. In the second step, the final products form via a hydrogen transfer. For the hydrolytic deamination reaction of guanine and 3H₂O or 4H₂O, only two molecules of water participate in the reaction, and other water molecule make the transition state more stable as a catalyst. The study on the potential energy surface shows that the deamination reaction of G and nH₂O does not take place because of a higher barrier for the opening system, which is in agreement with the experimental result.     

单分散SnO2中空微纳米球的制备和性质

模板法是制备无机中空微纳米球的重要方法之一. 本文以苯乙烯为单体, 通过乳液聚合得到粒径约为620 nm的单分散聚苯乙烯(PS)微球. 以磺化后的聚苯乙烯(PSS)微球为模板, 利用阴阳离子静电吸附作用, 将PSS与前驱体SnSO₄中的Sn²⁺结合. 通过Sn²⁺在乙醇-水介质中的水解作用得到核-壳复合结构, 再经高温煅烧, 得到SnO₂中空微纳米球. 实验对前驱体的浓度、表面活性剂的用量、反应时间及模板选择等方面做了研究,通过扫描电镜(SEM)、X 射线衍射(XRD)、红外(IR) 光谱、热重分析(TGA)、H₂ 程序升温还原(H₂-TPR)、Brunauer-Emmett-Teller (BET)比表面积等技术深入探究SnO₂中空微纳米球的结构, 并对比中空SnO₂与实心粒子的氧化还原特性. BET和H₂-TPR显示将SnO₂制备成微纳米空心球后其比表面积增大, 表面氧空位明显增多, 氧化活性明显提高. 从IR 及XRD推断核-壳结构形成机理, 进而优化出简单合理的实验方案, 获得表面光滑、结构致密, 包覆厚度可控的SnO₂中空微纳米球.     

Photodegradation of poly(ether sulphone) Part 1. A time‐of‐flight secondary ion mass spectrometry study

An extensive study of the surface chemical changes to poly(ether sulphone) (PES) ultrafiltration membranes is made for the first time by the use of time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) after photoirradiation at 254 nm with irradiances varying from 10 to 300 mJ cm^?2 in a nitrogen atmosphere. Complementary information is provided by analysis with x‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR). The versatility, superior specificity and sensitivity of using ToF‐SIMS to investigate degradation phenomena are highlighted. The combined results demonstrate that photoirradiation causes a number of chemical changes to the surface: incorporation of oxygen; degradation of the benzene rings and formation of oxidized carbon species; depletion of carbon; reduction of ? SO₂? to some extent; formation of ? OH, C?O and ? SO₃H groups; and probable formation of ? C₆H₄? O? C₆H₅ end‐groups. In addition, no ? OSO₃H groups are formed and no formation of SO₂ is detected. Also, it is shown that chain scission dominates below an irradiation dose of ～200 mJ cm^?2 (at 254 nm in a nitrogen atmosphere). At higher doses, cross‐linking becomes dominant. Copyright © 2004 John Wiley & Sons, Ltd.     

Hydrogen Isotope Exchange Reactions in an Electrical Discharge

Hydrogen isotope exchange reactions occurring in (H₂O, D₂)or (D₂O, H₂) reacting system under a DC electricaldischarge were investigated using spectroscopic methods such asFourier-transform infrared (FTIR) and plasma emission spectroscopy(PES). The progress of the reactions was determined by real-time measurementof the IR absorbance of HDO molecule, a major product of the reaction. Theprogress of the reaction was studied as a function of the temperature, thecurrent density, and the composition of the reactants, while the pressure ofthe system was maintained at approximately 67 mbar. The results revealedthat the discharge method was far more effective in facilating the exchangereaction than was the conventional catalytic method. The (H₂O, D₂)system also generated a significant amount of D₂O besides HDO andHD as the ratio of D₂ to H₂O was increased. Thetransient species of the system, such as H or D atoms, were monitored duringthe discharge using emission spectroscopy. The analysis of the final products by mass spectroscopy confirmed that neither H₂ nor O₂was among the major products of the system in the discharge.     

辐照气氛对异丙氧基杯[4]冠-6辐解的影响

异丙氧基杯[4]冠-6(1,3-交替-25,27-二(2-丙氧基)杯[4]芳烃-26,28-冠-6, 简称BPC6)对高放废液中的放射性Cs离子具有很好的选择萃取性能, 然而在萃取过程中BPC6 会受到强辐射场辐照, 所以有必要研究其辐射稳定性. 本文应用气相色谱(GC)、傅里叶变换显微红外(Micro-FTIR)和核磁共振(NMR)谱等手段分析了BPC6 固体分别在O₂和N₂气氛下的γ辐照效应. 结果表明, 当剂量为1 MGy时, O₂气氛下BPC6 的辐解率明显高于N₂(分别约为10.4%和2.5%), 而且气体辐解产物也有很大差异, 在O₂气氛下主要为H₂、CH₄、CO和CO₂,而在N₂辐照气氛下还有C₂H₄、C₂H₆、C₃H₆和C₃H₈等产物. 通过综合分析气体与固体辐解产物, 我们提出BPC6在不同气氛下具有不同的辐解途径, 这将为BPC6 萃取体系的辐射效应研究提供新的方法与思路, 加深对其辐解机理的认识.     

Synthesis and study of lithium triuranate Li2U3O10 · 6H2O

Li₂U₃O₁₀ · 6H₂O crystal hydrate was synthesized by the reaction between synthetic schoepite UO₃ · 2.25H₂O and aqueous lithium nitrate solution under hydrothermal conditions at 200°C. The composition and structure of the obtained compound were established, and its dehydration and thermal decomposition were studied, by chemical analysis, X-ray diffraction, IR spectroscopy, and scanning calorimetry.     

1，1'-二羟基-5，5'-联四唑的镧系金属配合物的合成、表征及热行为

以1,1′-二羟基-5,5′-联四唑(H_2BTO)为配体,镧系金属离子作为金属中心,采用溶剂热法制备了5种金属配合物:[La_2(BTO)_3(H_2O)_8]·2H_2O (1)、[Ce_2(BTO)_3(H_2O)_8]·2H_2O (2)、[Pr_2(BTO)_3(H_2O)_8]·2H_2O (3)、[Sm_2(BTO)_3(H_2O)_8]·2H_2O (4)和[Nd_2(BTO)_3(DMF)_4]·6H_2O (5)。通过单晶X射线衍射和元素分析对5种配合物的结构进行了表征。结果表明,5种配合物均属于单斜晶系,P2_1/n空间群。利用差示扫描量热法研究了配合物1～4的热稳定性,采用Kissinger法和Ozawa法分别计算了其热分解动力学参数。     

Structures and Unexpected Dynamic Properties of Phosphine Oxides Adsorbed on Silica Surfaces

Solid‐state NMR spectroscopy of selected phosphine oxides adsorbed on silica surfaces establishes the surface mobilities, even of phosphine oxides with high melting points. Crystal structures of the adducts Ph₃PO ? HOSiPh₃ and Cy₃PO ? H₂O indicate that the interactions with silica involve hydrogen bonding of the P?O group to adsorbed water and surface silanol groups.     

The preparation of polysiloxane xerogels containing amide derivatives of phosphonic and thiophosphonic acids in the surface layer

Xerogels containing residues of amide derivatives of phosphonic and thiophosphonic acids, ≡Si(CH₂)₃NHP(S, O)(OC₂H₅)₂ (functional group concentration of 1.3–2.2 mmol/g) have been prepared by a sol-gel method. It has been shown that xerogels having a developed porous structure (with specific surface areas of 240–485 m²/g, pore volumes of 0.20–0.50 cm³/g, and pore diameters of 3.6–6.5 nm) are formed at tetraethoxysilane-to-trifunctional silane ratios of 4: 1 (and above) and 6: 1 (and above) for the derivatives of phosphonic and thiophosphonic acids, respectively. The IR and ¹³C CP/MAS NMR spectroscopy data have demonstrated that the surface layer of the xerogels contains not only (thio)phosphonic acid residues, but also silanol groups and water molecules participating in hydrogen bonding. The ²⁹Si CP/MAS NMR spectroscopy data have indicated that structural groups are, for the most part, contained in structural units T³ [(≡SiO)₃Si(CH₂)₃NHP(O, S)(OC₂H₅)₂] and T² [(≡SiO)₂Si(OR)[(CH₂)₃NHP(O, S)(OC₂H₅)₂] (R = H or C₂H₅).     

Influence of Microwave Synthesis Parameters on the Size and Morphology of the Resulting MgAl2O4 Nanoparticles

In the present study, Nano-sized magnesium aluminate powders were successfully synthesized via microwave process based on the reaction between Mg (NO₃)₂·6H₂O and Al (NO₃)₃·9H₂O in distilled water, at various conditions. The products were characterized by X-ray diffraction, scanning electron microscopy (SEM), transmission electron microscopy, photoluminescence (PL) spectroscopy, and EDAX analysis. The effects of different parameters such as reaction time and microwave power on the morphology, particle size, and PL properties of the product were studied by SEM images and the PL.     

Heterogeneous reaction of NO2 with sea salt particles

To understand how NO₂ reacts with sea salt particles in the atmosphere of Mega-cities in coastal zones, the heterogeneous reaction of NO₂ on the surface of wet sea salt was investigated with diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and ion chromatography (IC). Kinetic measurements indicated that nitrate formation on sea salt was second order in NO₂ concentration and reactive uptake coefficients were (5.51 ± 0.19) × 10^?7 and 1.26 ± 10^?6 respectively under 0% and 20% relative humidity (RH) at NO₂ molecular concentration of 1.96 × 10¹⁵ mol/cm³. The results showed that liquid water was formed at the site of MgCl₂·6H₂O, CaCl₂·2H₂O on the surface of sea salt and made the reaction more sustainable by releasing hydrated water and absorbing water from air even under a low RH (? 30%). Therefore, pure NaCl particles should not be used to represent sea salt in studies of the heterogeneous reaction with NO₂.     

制备条件对Cu2O结构及甲醛乙炔化性能的影响

以Cu（NO₃）₂·3H₂O为铜源,在液相还原过程中,调变沉淀剂NaOH、还原剂L-抗坏血酸钠的加入顺序制备了Cu₂O,借助X射线粉末衍射（XRD）、傅里叶变换红外光谱（FT-IR）、拉曼光谱（Raman）、俄歇电子能谱（XAES）和H₂程序升温还原（H₂-TPR）等手段研究了制备条件对Cu₂O结构及催化甲醛乙炔化性能的影响.结果表明,调变NaOH及L-抗坏血酸钠的添加方式改变了Cu₂O的结晶度与粒径尺寸,从而使Cu₂O表现出不同的炔化性能.先加入NaOH,后加入抗坏血酸钠,Cu₂O结晶度高,粒径大,难以转化为活性物种炔化亚铜;先加入抗坏血酸钠,后加入NaOH,Cu₂O被过度还原为非活性的金属Cu,两者均造成催化剂活性较低.而NaOH和抗坏血酸钠混合后添加的方式制备出表面Cu₂O结晶完整而体相Cu₂O分散度高的样品,这使得Cu₂O高效转化为炔化亚铜活性物种,表现出最优的炔化性能,在适宜的反应条件下,1,4-丁炔二醇收率达到71.7%,经6次循环后,仍保持在56.5%.     

The synergistic cooperation of NH⋯O and CH⋯O hydrogen bonds in the structures of three new phosphoric triamides

The supramolecular assemblies of three new phosphoric triamides, {(C₆H₅CH₂)(CH₃)N}₂(4-CH₃-C₆H₄C(O)NH)P(O) (1), {(C₆H₁₁)(CH₃)N}₂(4-CH₃-C₆H₄C(O)NH)P(O) (2) and {(C₂H₅)₂N}₂(4-CH₃-C₆H₄C(O)NH)P(O) (3) were studied by single crystal X-ray diffraction as well as by Hirshfeld surface analysis. It was found that a synergistic cooperation of NH?O and CH?O hydrogen bonds occurs in all three structures, but forming unique supramolecular architectures individually. Along with the presence of centrosymmetric dimers in 1, 2 and 3, based on a classical NH?O hydrogen bond, the presence of weak CH?O interactions play an additional and vital role in crystal architecture and construction of the final assemblies, collectively identified as a centrosymmetric dimer (0D), a 1-D array and a 3-D network, respectively. These differences in superstructures are related to the effect of aromatic, bulk and flexible groups used in the molecules designed, with a similar C(O)NHP(O) backbone. The NH?O contacts in 1, 2 and 3 are of the “resonance-assisted hydrogen bond” types and also the anti-cooperativity effect can be considered in the multi-acceptor sites P═O in 1 and 2 and C═O in 3. All three compounds were further studied by 1D NMR experiments, 2D NMR techniques (HMQC and HMBC (H–C correlation)), high resolution ESI–MS, EI–MS spectrometry and IR spectroscopy methods.