Unprecedented living olefin polymerization derived from an attractive interaction between a ligand and a growing polymer chain

Ti complexes incorporating fluorine-containing phenoxy-imine chelate ligands (fluorinated Ti-FI catalysts) have been demonstrated to induce an unprecedented living polymerization effect with both ethylene and propylene, through an attractive interaction between the fluorine atom in the ligand and a beta-hydrogen atom on the growing polymer chain. With the aid of this attractive interaction, highly controlled living ethylene polymerization, highly-syndiospecific living propylene polymerization, the synthesis of unique block copolymers from ethylene and propylene, and the catalytic production of monodisperse polyethylene and Zn-terminated polyethylene have been realized. The attractive interaction provides a conceptually new strategy for the achievement of controlled living olefin polymerization.     

Application of New Modified Poly(ethylene Oxide)-Block-Poly(propylene oxide)-Block-Poly(ethylene oxide) Copolymers as Demulsifier for Petroleum Crude Oil Emulsion

Water soluble nonionic amphiphilic block copolymers based on hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(propylene glycol) (PPG) were prepared. Poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene glycol) copolymers, PEG-PPG-PEG, were prepared in the normal condition. The chemical composition and molecular weights of the prepared copolymers were determined from ¹H NMR and GPC techniques. The surface properties of the prepared surfactants were determined by measuring the surface tension at different temperatures. The prepared nonionic surfactants were evaluated as demulsifiers for water in crude-oil emulsions that were pronounced at different ratios of crude oil: water at 318 K and 333 K. The experimental results showed that the dehydration rate of the prepared demulsifiers reached 100% based on demulsifier chemical compositions and concentrations.     

Melting behavior of ethylene oxide–propylene oxide (sym-PEP) block copolymers

Melting points and lamellar thicknesses have been measured for ethylene oxide–propylene oxide block copolymers (sym-PEP) with central poly(ethylene oxide) block lengths of 70–100 chain units and end poly(propylene oxide) block lengths of 0–30 chain units. Melting points of the block copolymers are lower than those of the corresponding poly(ethylene oxide) homopolymer by an amount (up to 15°C) which increases as the poly(propylene oxide) block length increases. Most samples have more than one melting transition, which can be assigned to variously folded chain crystals. End interfacial free energies σ_e for the various crystals have been estimated by use of Flory's theory of melting of block copolymers. For a given crystal type (e.g., once-folded-chain) σ_e is higher the longer the chain length of the end poly(propylene oxide) blocks. For a given copolymer σ_e is lower, the more highly folded the poly(ethylene oxide) chain.     

Olefin copolymerization with metallocene catalysts. I. Comparison of catalysts

A number of metallocene/methylaluminoxane (MAO) catalysts have been compared for ethylene/propylene copolymerizations to find relationship between the polymerization activities, copolymer structures, and copolymerization reactivity ratio with the catalyst structures. Stereorigid racemic ethylene bis (indenyl) zirconium dichloride and the tetrahydro derivative exhibit very high activity of 10 ⁷ g (mol Zr h bar)^?1, giving copolymers having comonomer compositions about the same as the feed compositions, molecular weights increasing with the increase of ethylene in the feed, random incorporation of comonomers, and narrow molecular weight distribution indicative of a single catalytic species. Nonbridged bis (indenyl) zirconium behaved differently, favoring the incorporation of ethylene over propylene, producing copolymers whose molecular weight decreases with the increase of ethylene in the feed, broad molecular weight distribution, and a methanol soluble fraction. This catalyst system contains two or more active species. Simple methallocene catalysts have much lower polymerization activities. C_pTiCl₂/MAO produced copolymers with tendency toward alternation, whereas Cp₂HfCl₂/MAO gave copolymer containing short blocks of monomers.     

Synthesis of AB(BA), ABA and BAB block copolymers of tert-butyl methacrylate (A) and ethylene oxide (B)

Well-defined AB(BA), ABA, and BAB block copolymers of tert-butyl methacrylate (tBMA) (A) and ethylene oxide (EO) (B) have been prepared by sequential living anionic polymerization of the two comonomers, irrespective of their addition order. Diphenyl methyl potassium and naphthalene potassium have been successfully used as mono- and difunctional initiators, respectively. In all cases, molecular weight and composition of the block copolymers can be predicted on the basis of the monomer over initiator molar ratio, and the molecular weight distribution is relatively narrow. Size exclusion chromatography, selective extractions of homopolymers, and ¹H- and ¹³C-NMR spectroscopy support that block copolymerization proceeds without homopolymer formation nor side reactions, e.g., transesterification reactions. The PtBMA blocks have been quantitatively hydrolyzed into polyacid ones with formation of polyacid-b-polyether block copolymers as supported by titration, ¹H-NMR, and IR analysis. © 1992 John Wiley & Sons, Inc.     

Ethylene-propylene copolymerization initiated with solubilized ziegler-natta macromolecular complexes. II. Characterization of [styrene]-b-[ethylene-co-propylene] copolymers

Copolymerization of ethylene (E) with propylene (P) initiated with soluble (polystyrene)₁₀₀-butadiene₃-Li/TiCl₄ complexes leads to [St]-b-[E-co-P] diblock copolymers with a random [E-P] block. GPC and ¹³C-NMR analyses of copolymers with various compositions and block lengths disclose well-defined linear structures. From DSC measurements of such materials, three different endothermal transition regions are observed: two glass transition regions corresponding, respectively, to the T_g of styrenic and olefinic blocks, and one [E-P] block melting region in which propylene units play a primary role. Furthermore, an additional endotherm is observed, depending on the thermal history of the sample.     

Redox polymerization process: An efficient tool for the synthesis of block copolymers

The synthesis of poly(acrylonitrile)-block-poly-(ethylene glycol)-block-poly(acrylonitrile) copolymers has been carried out using a redox system consisting of ceric ion and poly(ethylene glycol)s of various molecular weights in aqueous medium. The generation of intermediate radicals in the redox process has been confirmed by ESR spectroscopy and the polymerization progressing through ‘blocking from’ mechanism has been postulated. The formation of the block copolymers has been confirmed by chemical tests and fractional precipitation technique as well as by FT-IR and FT-NMR [¹H and ¹³C–(¹H)] spectroscopic techniques. The triblock nature of the block copolymers has been ascertained through the cleavage of ether linkage of the PEG segment. TG/DTA studies of the block copolymers with PEG molecular weights of 1000 and above revealed two-stage decomposition, while their DSC traces exhibited a shift in the melting peak of PEG. GPC investigations of the block copolymers manifested a high homogeneity with unimodal distribution of molecular weights. SEM studies indicated significant changes in the morphological characteristics of the block copolymers. © 1995 John Wiley & Sons, Inc.     

Melting behavior of ethylene oxide–propylene oxide (sym-EPE) block copolymers

Melting points have been measured for several ethylene oxide–propylene oxide block copolymers (sym-EPE) chosen from the Pluronic range. Melting points of the block copolymers are lower than those of the corresponding poly(ethylene oxide) homopolymer by up to 4°C. The melting point depressions are much smaller than those observed for comparable sym-PEP block copolymers.     

Interactions of amphiphilic block copolymers with lipid model membranes

Studies on interactions between amphiphilic block copolymers and lipid membranes have been focused traditionally on ABA triblock copolymers of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide), widely due to their commercial availability. However, new architectures of amphiphilic block copolymer have been synthesized in recent years partially taking advantage of new polymerization techniques. This review focuses on amphiphilic block copolymers with potential biological activity and on model membrane systems used for studying interactions with such block copolymers. Experimental methods to study block copolymer–phospholipid interactions in Langmuir monolayers, liposomes, and planar bilayers are summarized. This work is intended to convey a better understanding of amphiphilic block copolymers used for in vitro and in vivo experiments in medicine and pharmacy. Recent developments and open questions are addressed.     

Comparative study of the kinetics of non-isothermal melt solidification of random copolymers of butene-1 with either ethylene or propylene

The kinetics of non-isothermal melt solidification of random butene-1/propylene copolymers has been compared with that of random butene-1/ethylene copolymers. Analysis of the distance between neighbored chain segments in the crystal phase revealed inclusion of propylene chain defects into crystals, while ethylene co-units are excluded from crystallization. As a consequence of different acceptance of propylene and ethylene chain defects to participate in crystallization, the kinetics of the transition of the melt into ordered phase is significantly slower in random butene-1/ethylene copolymers. For samples of similar co-unit concentration, the decrease of the crystallization temperature and of the critical cooling rate to suppress ordering/crystallization is higher in random butene-1/ethylene copolymers than in butene-1/propylene copolymers. Due to the required rejection of ethylene co-units at the crystal growth front, ultimately, the maximum crystallinity is lower in butene-1/ethylene copolymers than in butene-1/propylene copolymers of similar amount of co-units.     

Modeling random methyl branching in ethylene/ propylene copolymers using metathesis chemistry: synthesis and thermal behavior

The structure of random ethylene/propylene (EP) copolymers has been modeled using step polymerization chemistry. Six ethylene/propylene model copolymers have been prepared via acyclic diene metathesis (ADMET) polymerization and characterized for primary and higher level structure using in-depth NMR, IR, DSC, WAXD, and GPC analysis. These copolymers possess 1.5, 7.1, 13.6, 25.0, 43.3, and 55.6 methyl branches per 1000 carbons. Examination of these macromolecules by IR and WAXD analysis has demonstrated the first hexagonal phase in EP copolymers containing high ethylene content (90%) without the influence of sample manipulation (temperature, pressure, or radiation). Thermal behavior studies have shown that the melting point and heat of fusion decrease as the branch content increases. Further, comparisons have been made between these random ADMET EP copolymers, random EP copolymers made by typical chain addition techniques, and precisely branched ADMET EP copolymers.     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

嵌段结构对两亲嵌段共聚物水溶液行为的影响

在合成了二种具有相同组成不同嵌段结构排布的共聚物基础上对它们溶液的物理化学行为用荧光探针的方法进行了研究，结果表明：由于结构排布的不同其物理化学行为有着较大的差异，三嵌段结构的共聚物较二嵌段者更易于形成胶束体系，而二嵌段共聚物则易于发生凝胶化，对上述结果进行讨论和解释．     

Clouding Behavior of Ethylene Oxide‐Propylene Oxide Block Copolymer P85: The Effect of Additives

The characteristic feature of nonionic poly(ethylene oxide)‐poly(propylene oxide)‐poly(ethylene oxide) (PEO‐PPO‐PEO) triblock copolymers is that at higher temperatures they undergo clouding and liquid‐liquid phase separation. The clouding temperature of such block copolymers can be profoundly altered in the presence of various additives. In this work the effect of various additives on the clouding phenomenon of triblock copolymer P85[(EO)₂₆(PO)₃₉(EO)₂₆] is discussed.     

The Synthesis of Special Block Copolymers Using a Reaction Calorimeter

Summary : The paper provides experimental results about an easy and versatile method to produce amphiphilic block copolymers, block copolymer particles, and even inorganic – polymeric nano-composites via aqueous heterophase polymerization. Special emphasis is placed on the morphology and colloidal properties of some non-ionic di- and triblock copolymer particles with poly(ethylene glycol) of 10⁶ g/mol molecular weight as hydrophilic block as well as di-stimuli-responsive block copolymers containing both a poly(N-isopropyl acrylamide) and a poly(ionic liquid) block.     

Cytotoxicity of nonionic amphiphilic copolymers

The purpose of this study is to ascertain the relationship between the structure of an amphiphilic nonionic polymer and its toxicity for cells (cytotoxicity) growing in a culture. To this end, 16 polymers of different architectures and chemical structures are tested, namely, linear triblock copolymers of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (Pluronics); diblock copolymers of propylene oxide, ethylene oxide, and hyperbranched polyglycerol; alternating and diblock copolymers of ethylene oxide and dimethylsiloxane; and two surfactants containing linear (Brij-35) or branched (Triton X-100) aliphatic chains. Polymer-cell interaction is assayed in a culture medium in the absence of serum. Effective concentrations of the polymers causing 50% cell death, EC₅₀, vary within three orders of magnitude. Toxic concentrations of the alternating copolymer, Triton X-100, and Brij-35 are lower than their CMC values. In contrast, all block copolymers, regardless of their chemical structures, become toxic at concentrations above the CMC; that is, they acquire cytotoxicity only in the micellar form. The EC₅₀ values of the copolymers depend on their hydrophilic-liphophilic balance (HLB) through the following empirical formula: EC₅₀ × 10⁶ = 8.71 × HLB^2.1. This relationship makes it possible to predict the cytotoxic concentration region of a block copolymer of a known structure.     

Study on sequence distribution of segmented poly(urethane urea)s by 13C-NMR spectroscopy: Effect of polymerization procedures

The segmented poly(urethane urea) copolymers were synthesized by one- and two-step polymerization procedures. The copolymers were based on 4,4′-diphenylmethane diisocyanate, 3,5-diethyltoluene diamine, and ethylene oxide-capped poly(propylene oxide) diol. The mean sequence lengths of polyurethane soft block and polyurea hard block as well as the sequence distribution of the hard block in the copolymers were estimated from the signals of aromatic carbons in ¹³C-NMR spectra. The results indicated that two-step polymerization led to longer mean sequence lengths and broader hard block sequence distribution than one-step polymerization did. © 1996 John Wiley & Sons, Inc.     

Synthesis of high‐impact biodegradable multiblock copolymers comprising of poly(butylene succinate) and poly(1,2‐propylene succinate) with hexamethylene diisocyanate as chain extender

Block copolymers demonstrate excellent thermal and mechanical properties superior to their corresponding random copolymers and homopolymers. However, it is difficult to synthesize block copolymers comprising of different polyester segments by copolycondensation due to the serious transesterification reaction. In this study, multiblock copolymers comprising of two different polyester segments, i.e. crystallizable poly(butylene succinate) (PBS) and amorphous poly(1,2‐propylene succinate) (PPSu), were synthesized by chain‐extension with hexamethylene diisocyanate (HDI). Amorphous PPSu segment was incorporated to improve the impact strength of PBS. The copolymers were characterized by GPC, laser light scattering (LLS), NMR, DSC, and mechanical testing. The results of ¹³C NMR spectra suggest that multiblock copolymers with regular sequential structure have been successfully synthesized. The data of DSC and mechanical testing indicate that block copolymers possess excellent thermal and mechanical properties with satisfactory tensile strength and extraordinary impact strength achieving upto 1900% of pure PBS. The influence of PPSu ratio and chain length of both the segments on the thermal and mechanical properties was investigated. The incorporation of an amorphous soft segment PPSu imparts high‐impact resistance to the copolymers without obviously decreasing the melting point (T_m). The favorable mechanical and thermal properties of the copolymers also depend on their regular sequential structure. At the same time, the introduction of amorphous PPSu segment enhances the enzymatic degradation rate of the multiblock copolymers. Copyright © 2009 John Wiley & Sons, Ltd.     

Copolymerization of ethylene and propylene catalyzed by magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts

Magnesium chloride supported vanadium/titanium bimetallic Ziegler-Natta catalysts with di-i-butyl phthalate as internal donor for copolymerization of ethylene and propylene were prepared.The effects of reaction temperature, ethylene/propylene molar ratio,aluminium/vanadium（Al/V）molar ratio and titanium/vanadium molar ratio on the catalytic activity were investigated.The molecular weight,molecular weight distribution,sequence composition and crystallinity of the products were measured by gel permeation chromatography,¹³C-NMR and differential scanning calorimetry analysis, respectively.In comparison to the vanadium and titanium catalysts,the bimetallic catalyst showed higher catalytic activity and better copolymerization performance.The obtained ethylene/propylene copolymers have high molecular weight （10⁵）,broad molecular weight distribution,high propylene content with random or short blocked sequence structures （r_Er_P=1.919）,low melting temperatures and low crystallinities（X_c<20%）.     

PH/温度响应的两亲性嵌段共聚物的研究

刺激响应性两亲性嵌段共聚物由于具有多种潜在的用途而引起广泛关注。其中,pH和温度响应的嵌段共聚物被认为是较易获得并对外界环境刺激响应较敏感的一类聚合物。本文综述了利用各种可控/活性聚合方法制备不同结构刺激响应性的两亲性嵌段共聚物研究的最新进展,重点介绍聚（甲基）丙烯酸及其酯类与聚环氧乙烷(PEO)和聚环氧丙烷(PPO)类结构的两亲性嵌段共聚物的合成以及它们在水溶液中对pH值和温度变化的响应性。