Dielectric properties of oxydianiline‐based polyimide thin films according to the water uptake

For polyimide thin films, the dielectric properties were investigated with the capacitance and optical methods. The dielectric constants of the 4,4′‐oxydianiline (ODA)‐based polyimide thin films varied from 2.49 to 3.10 and were in the following decreasing order: 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA)–ODA > 1,2,4,5‐benzenetetracarboxylic dianhydride (PMDA)–ODA > 4,4′‐hexafluoroisopropylidene diphthalic dianhydride (6FDA)–ODA. According to the absorption of water, the diffusion coefficients in the films varied from 4.8 × 10^?10 to 7.2 × 10^?10 cm²/s and were in the following increasing order: BPDA–ODA < PMDA–ODA < 6FDA–ODA. The dielectric constants and diffusion coefficients of the polyimides were affected by the morphological structures, including the molecular packing order. However, because of the water uptake, the changes in the dielectric constants in the polyimide thin films varied from 0.49 to 1.01 and were in the following increasing order: BPDA–ODA < 6FDA–ODA < PMDA–ODA. Surprisingly, 6FDA–ODA with bulky hexafluoroisopropylidene groups showed less of a change in its dielectric constant than PMDA–ODA. The total water uptake for the polyimide thin films varied from 1.43 to 3.19 wt % and was in the following increasing order: BPDA–ODA < 6FDA–ODA < PMDA–ODA. This means that the changes in the dielectric constants in the polyimide thin films were significantly related to the morphological structure and hydrophobicity of hexafluoroisopropylidene groups. Therefore, the morphological structure and chemical affinity in the polyimide thin films were important factors in controlling the dielectric properties. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2190–2198, 2002     

Copoly(peryleneimide)s containing 1,3,4‐oxadiazole rings: Synthesis and properties

New copolyimides containing perylenediimide, oxadiazole and hexafluoroisopropylidene moieties were prepared by one‐step polycondensation reaction in solution at high temperature of aromatic diamines containing preformed oxadiazole ring with a mixture of a dianhydride having a perylene ring and another dianhydride with hexafluoroisopropylidene unit. The thermal stability and glass transition temperatures of these copolyimides were measured and compared with those of related polyimides. The solid polymers were also studied by polarized light microscopy and X‐ray diffraction which revealed a semicrystalline state consisting of face‐to‐face arranged columns of perylenediimide units. The film‐forming ability and properties of the resulting thin films were investigated by using atom force microscopy and scanning electron microscopy which showed that the films were organized into self‐assembled rod‐like structures. The UV‐Vis and photoluminescence properties in solution and in solid state were also investigated. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4230–4242, 2010     

Atomistic models of three fluorinated polyimides in the amorphous state

Molecular models of three fluorinated polyimides based on the 4,4′‐(hexafluoroisopropylidene)diphthalic dianhydride (6FDA) have been studied using molecular dynamics (MD) simulations. The respective diamines were 4,4′‐hexafluoroisopropylidene dianiline (6FpDA), 3,3′‐hexafluoroisopropylidene dianiline (6FmDA), and 2,4,6‐trimethyl‐1,3phenylenediamine (DAM). Thirty independent samples were prepared using a hybrid pivot Monte Carlo‐MD generation technique and average densities were found to be in very good agreement with experiment. Model structures also agreed with available wide‐angle X‐ray scattering data. Cohesive energies, Hildebrand solubility parameters, fractional free volumes (FFV), void space distributions and intermolecular as well as intramolecular interactions were analyzed. The differences in bulk properties between both 6FDA‐6FpDA and 6FDA‐6FmDA isomers remain fairly small, although the configurations of the former are more extended. 6FDA‐DAM has a lower density, larger intermolecular distances, and higher free volume than the other two polyimides. Results are discussed with respect to their use as matrices for gas separation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1166–1180, 2009     

UV-ozone modification of plasma-polymerised acetonitrile films for enhanced cell attachment

Plasma polymerisation is of great interest for modifying the surface properties of biomedical devices in order to control, for example, protein adsorption and cell attachment. In this paper we present results for plasma-polymerised acetonitrile deposited onto silicon or polystyrene substrates. The chemistry of films deposited under a range of experimental conditions was studied by X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). XPS provided evidence that the elemental composition of the films varied with rf power to flow rate parameter (W/F) with films produced at higher W/F being deficient in nitrogen. FTIR revealed that the plasma deposited film contained a wide range of nitrogen functional groups including amine, imine and nitrile. Oxidation of the films by exposure to radiation from a low pressure mercury vapour lamp in an air ambient increased the surface oxygen levels from 3 to 17 at.% after 300 s exposure. XPS also revealed that the oxidation process proceeded via the formation of carbonyl groups at short exposure times (<60 s) while longer treatment times (>60 s) resulted in an increase in the concentration of carboxyl groups. To assess their potential to support cell growth, polystyrene culture dishes coated with plasma deposited films and UV-ozone oxidised films were seeded with 1BR.3.N human fibroblast cells and incubated for up to 72 h. Un-oxidised plasma-polymerised acetonitrile films were found to give comparable cell attachment densities as tissue culture polystyrene. The greatest cell attachment density was found with plasma polymer films which had been UV-ozone treated for the longest time (300 s). Enhanced attachment to this surface was attributed to the high level of carboxylic groups found on this substrate.     

New halogen-containing polyimides based on 1,3-bis(3,4-dicarboxyphenyl)-1,1,3,3-tetramethyldisiloxane dianhydride

Previously undescribed halogen-containing polyimides are synthesized via the interaction of 1,3-bis(3,4-dicarboxyphenyl)-1,1,3,3-tetramethyldisiloxane dianhydride with aromatic diamines containing hexafluoroisopropylidene and dichloroethylene groups. The influence of tetramethyldisiloxane, hexafluoroisopropylidene, and dichloroethylene groups incorporated into these polymers on their solubility, heat resistance, thermal stability, and film-forming properties is investigated.     

Polyimidines. XI. Polyimidines from 3,3′,4,4′-benzophenonetetracarboxylic dianhydride and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride

Two new bis(benzylidenephthalide)monomers were synthesized by melt condensation of phenylacetic acid with 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and with 4,4′-(hexafluoroisopropylidene)diphthalic anhydride (6FDA). A mixture of three isomers for each monomer was obtained and polymerized with diamines to produce new polyimidines. Polymerizations were conducted with m-xylylenediamine (MXDA) or 4,4′-oxydianiline (ODA) in quantitative yields for the undehydrated intermediate. Inherent viscosities ranged from 0.17 to 0.35 dL/g in N,N-dimethylformamide (DMF) or N-methyl-2-pyrrolidone (NMP). These intermediate poly(hydroxylactams) were thermally dehydrated to polyimidines which exhibited a 10% weight loss, as high as 546°C in nitrogen. Inherent viscosities of the dehydrated (cured) polyimidines ranged from 0.14 to 0.20 dL/g in NMP. Brittle films could be cast from NMP solutions.     

Formation of Exciplexes in Films of Polyimides,Polyamides, and Polyquinazolones Derived from Aromatic and Heteroaromatic Diamines

The emission bands exchibited by films of polyimides derived from 1,3-bis(3,4-dicarboxyphenoxy)benzene dianhydride, hexafluoroisopropylidenedibenzene-3,3′,4,4′-tetracarboxylic dianhydride, and aromatic and heteroaromatic diamines, and also of polyamides and polyquinazolones derived from the same amines are exciplex bahnds. With polyamides, complexes in the ground state are formed. The fluorescence of the photoconductivity sensitizer Rhodamine 6G is quenched in films of these polymers by the exciplex mechanism.     

Photochemical Synthesis of Anisotropic Silver Nanoparticles in Aqueous Solutions in the Presence of Sodium Citrate

The rapid one-step photochemical synthesis of anisotropic silver nanoparticles (ANPs) is reported. Silver ANPs were prepared from silver nitrate by a citrate route in aqueous solutions at room temperature under exposure to unfiltered light of a DRK 120 high-pressure mercury lamp. The silver ANPs form through one-electron reduction of the silver cation in its chelate complex with the production of sodium citrate photolysis. In the course of synthesis, small charged silver clusters and nanoparticles are formed first, which are then stabilized by citrate ions. Key factors that influence the synthesis of silver ANPs and their further transformation have been determined.     

ESCA applied to polymers. XXII. An investigation of sample charging phenomena for polymeric films on gold

Sample charging phenomena arising in the ESCA experiment have been investigated for gold and polymer films of known thickness ranging from 5 Å to 20 μ deposited on gold either insulated from or in electrical contact with the spectrometer. Charging induced by a monochromatic x-ray source is typically an order of magnitude greater than that induced by a nonmonochromatized source and exhibits a marked time dependence. A novel source of secondary electrons which employs a low-power, low-pressure mercury lamp external to the spectrometer source chamber as an alternative to an electron flood gun is described, and the charging and biasing characteristics of polymer films as a function of film thickness are discussed and demonstrated to provide an extra informational dimension for the study of polymeric materials.     

Polymers containing phenylquinoxaline rings

The synthesis and properties of poly(phenylquinoxalines) containing hexafluoroisopropylidene or silylene units in the backbone are described. The polymers have been prepared by polycondensation of aromatic diamines containing preformed phenylquinoxaline rings with a dianhydride or diacid chlorides containing hexafluoroisopropylidene groups, or with a dianhydride or diacid chlorides containing silylene units. The solubility, thermal stability, film forming ability, and electric insulating, mechanical, and electroluminescent properties of the thin films are discussed and compared with those of related heterocyclic polymers. Potential applications of poly(phenylquinoxalines) are outlined.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1739–1748, September, 2004.     

Heterocyclic polyamides containing hexafluoroisopropylidene groups

New heterocyclic polyamides have been synthesized by solution polycondensation of aromatic diamines containing phenylquinoxaline units with diacid chlorides having both imide and hexafluoroisopropylidene (6F) groups. These polymers are soluble in polar aprotic solvents, such as N-methylpyrrolidone (NMP) or N, N-dimethylformamide (DMF), and can be cast into flexible thin films from solutions. They show high thermooxidative stability with decomposition temperatures above 400°C and glass transition temperatures in the range of 225-300°C. The polymer films exhibit good chemical resistance towards diluted acids and good electrical insulating properties with dielectric constants in the range of 3.2–3.7.     

Synthesis,characterization, and thermal properties of novel arylene sulfone ether polyimides and polyamides

A new aromatic sulfone ether diamine was synthesized by nucleophilic aromatic substitution reaction of 5‐amino‐1‐naphthol with bis(4‐chlorophenyl) sulfone in the presence of potassium carbonate in a polar aprotic solvent. Polycondensation reactions of the obtained diamine with pyromellitic dianhydride (PMDA), benzophenonetetracarboxylic dianhydride (BTDA), and hexafluoroisopropylidene diphthalic anhydride (6FDA) resulted in preparation of thermally stable poly(sulfone ether imide)s. Poly(sulfone ether amide)s also were prepared by reaction of the diamine with terephthaloyl chloride (TPC) and isophthaloyl chloride (IPC). The prepared monomer and polymers were characterized by conventional methods. Physical and mechanical properties of polymers, including thermal stability, thermal behavior, solution viscosity, solubility behavior, and modulus, also were studied. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1487–1492, 2000     

On the photochemical dimerization of some 5‐substituted 2‐styryl‐4‐pyrones. The effect of 5‐hydroxy‐/ 5‐methoxy‐substitution

Irradiation of styryl‐4‐pyrones 1a‐1d or 2a‐2e (6‐9 × 10^?3 M, methanol solution) with filtered (RAYONET photochemical reactor, 300 nm) or unfiltered uv‐light (high‐pressure mercury arc lamp) under aerobic conditions led mainly to dimeric products. Parent 5‐hydroxy‐substituted compounds 1a‐1d yielded exclusively “half‐cage” dimers 3a‐d characteristic for 4‐pyrone dimerization. 5‐Methoxy‐analogues 2a‐2e behave like typical stilbene structures and the mixture of tetrasubstituted cyclobutanes 4 and 5 accompanied with minor amount of phenanthrene‐like compound 6 were the only isolable products of the irradiation. The structure elucidation of products is based on spectral data obtained from MS, IR, ¹H NMR and ¹³C NMR spectra applying COSY, APT, HETCOR, HMBC and NOESY techniques.     

Novel Non‐Coplanar and Tertbutyl‐Substituted Polyimides: Solubility,Optical, Thermal and Dielectric Properties

A novel aromatic diamine monomer bearing tertbutyl and 4‐tertbutylphenyl groups, 3,3′‐ditertbutyl‐4,4′‐diaminodiphenyl‐4′′‐tertbutylphenylmethane (TADBP), was prepared and characterized. A series of non‐coplanar polyimides (PIs) were synthesized via a conventional one‐step polycondensation from TADBP and various aromatic dianhydrides including pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (OPDA), 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) and 4,4′‐(hexafluoroisopropylidene)dipthalic anhydride (6FDA). All PIs exhibit excellent solubility in common organic solvents such as N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide (DMAc), N‐methyl‐2‐pyrrolidone (NMP), dimethyl sulfoxide (DMSO), chloroform (CHCl₃), tetrahydrofuran (THF), and so on. Furthermore, the obtained transparent, strong and flexible polyimide films present good thermal stability and outstanding optical properties. Their glass transition temperatures (T_gs) are in the range of 298 to 347°C, and 10% weight loss temperatures are in excess of 490°C with more than 53% char yield at 800°C in nitrogen. All the polyimides can be cast into transparent and flexible films with tensile strength of 80.5–101 MPa, elongation at break of 8.4%–10.5%, and Young's modulus of 2.3–2.8 GPa. Meanwhile, the PIs show the cutoff wavelengths of 302–356 nm, as well as low moisture absorption (0.30% –0.55%) and low dielectric constant (2.78–3.12 at 1 MHz).     

Preparation and properties of novel polyimides derived from 4‐aryl‐2,6 bis(4‐amino phenyl)pyridine

To prepare novel polyimides with enhanced thermal stability and high solubility in common organic solvents, diamine monomers, 4‐aryl‐2,6 bis‐(4‐amino phenyl)pyridine, were introduced. The diamines were reacted with three different conventional aromatic dianhydrides including pyromellitic dianhydride, benzophenone tetracarboxylic dianhydride, and hexafluoroisopropylidene‐2,2‐bis(phthalic‐dianhydride) (6FDA) in dimethylacetamide solvent to obtain the corresponding polyimides via the polyamic acid precursors and chemical imidization. The monomers and polymers were characterized by Fourier transform infrared spectroscopy, ¹H NMR, mass spectroscopy, and elemental analysis; and the best condition of polymerization and imidization were obtained via the study of model compound. The polyimides showed little or no weight loss by thermogravimetric analysis up to 500 °C, and those derived from 6FDA exhibited good solubility in various polar solvents. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3826–3831, 2001     

Low dielectric constant polyimide nanomats by electrospinning

The proper combination of material (i.e. fluorinated polyimides) and processing technique (electrospinning) could lead to the formation of polyimides with low dielectric constant, high thermo‐oxidative stability and glass transition temperature, and high hydrophobicity. The polyimides in this work were based on 4, 4‐bis [3′‐trifluoromethyl‐4′ (4′‐amino benzoxy) benzyl] biphenyl (Q) and various fluorinated and non‐fluorinated dianhydrides namely benzene‐1,2,4,5‐tetracarboxylic dianhydride, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride, benzophenone‐3,3′,4,4′‐tetracarboxylic dianhydride, and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA). Processing of the polyimides was carried out in poly(amic acid) stage by two different methods—electrospinning and solution casting for comparison purposes. The processing of polyimides by electrospinning led to enhancement in mechanical properties (dianhydride‐structure dependent) and hydrophobicity without sacrificing thermo‐oxidative stability and glass transition temperatures significantly. Also, low dielectric constants (as low as 1.43) could be attained by suitable combination of dianhydride (6FDA) with 4, 4‐bis [3′‐trifluoromethyl‐4′ (4′‐amino benzoxy) benzyl] biphenyl diamine. Copyright © 2011 John Wiley & Sons, Ltd.     

Photodecomposition of polymethylsiloxane

Infrared spectroscopy studies were undertaken to determine the effects of ultraviolet light radiation on a methylsiloxane resin. The results indicate that SiCH₂Si linkages were formed as a result of irradiation at wavelengths above 281 mμ from a xenon are lamp; on the other hand, Si? OH and SiCH₂CH₂Si linkages were formed instead when the resin was exposed to the lower wavelengths emitted from a mercury vapor lamp. The different effects on the resin induced by the two ultraviolet light sources are attributed to the fact that only the energies from the mercury vapor lamp radiation are sufficient to cause the excitation of oxygen molecules in the air surrounding the irradiated polymer. The excited oxygen molecules prevented the formation of SiCH₂Si structures by interacting with active %tbond;Si units that were formed as a result of Si? C bond rupture to produce Si? OH; SiCH₂CH₂Si linkages were formed as the result of a secondary reaction.     

Photolysis of organopolysilanes. The reaction of photochemically generated methylphenylsilylene with conjugated dienes

Photolysis of 2-phenylheptamethyltrisilane (I) in the presence of acyclic and cyclic conjugated dienes has been investigated using both a high-pressure mercury lamp with a quartz filter and a low-pressure mercury lamp with a Vycor filter. Irradiation of I in the presence of 1,3-butadiene, isoprene or 2,3-dimethylbutadiene with a high-pressure mercury lamp gave a product arising from photochemical isomerization of a silacyclopropane derivative and a compound apparently formed by 1,4-silylene addition, along with a 1/1 “ene” adduct of the diene to a photo-rearranged intermediate containing the silicon—carbon double bond. Irradiation of I in the presence of the conjugated diene with a low-pressure mercury lamp, followed by treatment of the product with methanol, afforded a methoxysilane arising from methanolysis of the corresponding silacyclopropane, together with the isomerization product, silacyclopentene and rearranged addition product. Irradiation of I in the presence of cyclopentadiene with a high-pressure mercury lamp produced methylphenylsilylcyclopentadiene, while irradiation of a similar mixture with a low-pressure mercury lamp followed by treatment with methanol gave 4-(methoxymethylphenylsilyl)-1-cyclopentene. With 1,3-cyclooctadiene, the photochemically generated methylphenylsilylene afforded many types of addition product. Photolysis of I in the presence of 1,3-cyclohexadiene, however, afforded none of the silylene addition products.     

New thermally stable and organosoluble heterocyclic poly(naphthaleneimide)s

As majority of polyheteroarylenes based on bis(naphthalic anhydrides), are difficult to process due to their infusiblity and insolubility in common organic solvents and solubility only in strong acids, this study is concerned with the synthesis and properties of new, easily processable polyimides and copolyimides containing naphthalene and oxadiazole rings. These polymers have been synthesized and their properties have been compared with regard to the influence of oxadiazole and naphthalene units on their physical properties. The polyimides were prepared by polycondensation reaction in solution of the aromatic diamines containing preformed oxadiazole ring with two dianhydrides having naphthalene units, at high temperature. Also, copolyimides were prepared by using a mixture of each naphthalene‐containing dianhydride, with hexafluoroisopropylidene‐dianhydride in the polycondensation reaction with the same diamino‐oxadiazoles. Most of the resulting polyimides and copolyimides were soluble in polar amidic solvents and in less polar solvents, and their solutions gave flexible films when spread onto glass plates. The thermal stability and glass transition temperature of these polyimides and copolyimides were measured and compared. The quality and the roughness of the spin‐coated films of these polymers were investigated by atomic force microscopy. The photoluminescence properties of the polymers in solution were studied to determine the color of emission. The UV absorption was also studied to determine the Stokes shift, and hence the possible reabsorption effects. The properties of the present polyimides make them attractive for applications in advanced optoelectronics and other related fields. Copyright © 2009 John Wiley & Sons, Ltd.     

Polyimide‐Polydimethylsiloxane Copolymers. Evaluation of the Thermal and Electrical Properties

Poly(dimethylsiloxane‐amic‐acid)s have been prepared starting from a fluorinated dianhydride, namely 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride, and a mixture of an aromatic diamine and bis(aminopropyl)‐oligodimethylsiloxane of controlled molecular weight, in different ratios. A solution imidization procedure was used to convert them quantitatively to the corresponding polyimides. The polymers, easily soluble both in polar (N‐methylpyrrolidone) and less polar (chloroform) solvents, were prepared for film‐forming by casting from solution. The thermal behavior in dependence on composition was evaluated by thermogravimetric analysis and differential scanning calorimetry. The kinetic processing of thermogravimetric data was carried out using the Flynn‐Wall‐Ozawa and Kissinger methods. Electrical insulating properties of some polymer films were evaluated on the basis of dielectric constant and dielectric loss tangent and their variation with frequency.