Structural and electronic characteristics of thienyl(aryl)iodonium triflates

A general strategy toward the synthesis of aryliodonium triflate salts has been exploited to afford derivatives that incorporate thiophene and bithiophene components. Both mono- and bis(iodonium) salts have been realized, and a series of bithienyl(aryl)iodonium triflates with increasingly electron-withdrawing substituents on the aryl moiety have been synthesized. X-ray crystallographic analysis of four derivatives (4a, 4b, 6b, and 8c) demonstrates that the solid-state organization of these salts incorporates extensive networks of secondary bonding interactions between the cationic iodonium centers and the triflate counterions. UV-vis spectroscopic analysis shows that the electronic interactions between pendent aryl and heteroaryl groups across the iodonium center can be dictated by substitution. Furthermore, the energy of the HOMO-LUMO gap decreases substantially in weakly or noncoordinating solvents.     

Vinyl carbocations: solution studies of alkenyl(aryl)iodonium triflate fragmentations

Generation of vinyl cations is facile by fragmentation of alkenyl(aryl)iodonium trifluoromethanesulfonates. Kinetics and electronic effects were probed by (1)H NMR spectroscopy in CDCl(3). Products of fragmentation include six enol triflate isomers in addition to iodoarenes. The enol triflates arise from direct reaction of a triflate anion with the starting iodonium salts as well as triflate reaction with rearranged secondary cations derived from those salts. G2 calculations of the theoretical isodesmic hydride-transfer reaction between secondary vinyl cation 7 and primary vinyl cation 6 reveal that cation 6 is 17.8 kcal/mol higher in energy. Activation parameters for fragmentation of (Z)-2-ethyl-1-hexenyl(3,5-bis-trifluoromethylphenyl)iodonium triflate, 17e, were calculated using the Arrhenius equation: E(a) = 26.8 kcal/mol, Delta H(++) = 26.2 kcal/mol, and Delta S(++) = 11.9 cal/mol x K. Added triflate increases the rate of fragmentation slightly, and it is likely that for most beta,beta-dialkyl- substituted vinylic iodonium triflates enol triflate fragmentation products are derived from three competing mechanisms: (a) vinylic S(N)()2 substitution; (b) ligand coupling (LC); and (c) concerted aryliodonio departure and 1,2-alkyl shift leading to secondary rather than primary vinyl cations.     

Recyclable synthesis of mesityl iodonium(III) salts

An efficient protocol for C–H condensation of hypervalent iodine compounds toward arenes in fluoroalcohols has been applied to the recyclable preparation of mesityl iodonium(III) salts. The electrophilicities of [hydroxy(tosyloxy)iodo]mesitylene (MesI(OH)OTs) and iodomesitylene diacetate (MesI(OAc)₂) are suitably enhanced in 2,2,2-trifluoroethanol. A series of nucleophilic aromatic compounds react smoothly with MesI(OH)OTs and MesI(OAc)₂ or in situ hypervalent iodine(III) species, generated from iodomesitylene, to provide the target mesityl iodonium(III) salts in good yields at room temperature with broad functional group tolerance. This C–H condensation strategy merits high para-regioselectivities during the diaryliodonium(III) salt formation, but the major limitation in the case of low-reactive aromatic substrates is byproduct formation resulting from the self-condensation of the nucleophilic mesitylene ring in MesI(OH)OTs and MesI(OAc)₂.     

Synthesis and study of iodonium borate salts as photoinitiators

Iodonium butyltriphenylborate salts (A I⁺ Ar′Ph₃B⁻ R), (Bu) were found to be more efficient than iodonium tetraphenylborate salts (RPh) when used as photoinitiators for the polymerization of acrylates. Relative photodecomposition rates were also different. It was found from a study of the photoreaction of iodonium borate salts with a model monomer, methyl methacrylate, that iodonium butyltriphenylborate salts simultaneously produce a butyl radical from the borate anion and an aryl radical from the iodonium cation upon irradiation. Both radicals initiate polymerization. Iodonium tetraphenylborate salts were found to release an aryl radical, but only from the iodonium cation. Iodonium borate salts exhibit strong absorption below 300 nm with a tail absorption above 400 nm. Thus, iodonium butyltriphenyl borate salts are efficient photoinitiators even when used with visible light. When a photosensitizer such as 5,7-diiodo-3-butoxy-6-fluorone is employed, iodonium butyltriphenylborate salts are rendered much more efficient for visible light photopolymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1667–1677, 1998     

Iron(II)‐Catalyzed Direct Cyanation of Arenes with Aryl(cyano)iodonium Triflates

A direct oxidative cyanation of arenes under Fe^II catalysis with 3,5‐di(trifluoromethyl)phenyl(cyano)iodonium triflate (DFCT) as the cyanating agent has been developed. The reaction is applicable to wide range of aromatic substrates, including polycyclic structures and heteroaromatic compounds.     

Preparation of Heteroaromatic (Aryl)iodonium Imides as I−N Bond‐Containing Hypervalent Iodine

Hypervalent iodine(III) compounds containing iodine–nitrogen bonds are very attractive amination reagents in organic synthesis. Heteroaromatic (aryl)iodonium imides containing a iodine–nitrogen bond and a hypervalent iodine(III) atom were prepared from heteroarenes, bis(sulfon)imides and (diacetoxyiodo)arenes under mild conditions. These compounds were stable under air and in organic solvents, and could be easily purified by precipitation. X‐ray crystal structure analysis indicated that the structure of N‐pivaloyl indolyl(phenyl)iodonium bis(tosyl)imides and N‐pivaloyl indolyl(2‐butoxyphenyl)iodonium bis(tosyl)imides was a dimer with a T‐shaped geometry at the iodine atom linked to an indole group and a bis(tosyl)imide by a monomer unit. Moreover, the use of substituted iodoarenes facilitated the purification of some of the heteroaromatic (aryl)iodonium imides.     

Efficient Pathway for the Preparation of Aryl(isoquinoline)iodonium(III) Salts and Synthesis of Radiofluorinated Isoquinolines

Iodonium compounds play a pivotal role in ¹⁸F‐fluorination of radiopharmaceuticals containing non‐activated arenes. However, preparation of these species is limited to oxidation conditions or exchange with organometallics that are prepared from aryl halides. Herein we describe a novel “one‐pot” process to assemble aryl(isoquinoline)iodonium salts in 40–94 % yields from mesoionic carbene silver complex and Aryl‐I‐Py₂(OTf)₂. The method is general, practical, and compatible with well‐functionalized molecules as well as useful for the preparation of a wide range of ¹⁸F‐labeled isoquinolines resulting in up to 92 % radiochemical conversion. As proof of concept, a fluorinated isoquinoline alkaloid, ¹⁸F‐aspergillitine is prepared in 10 % isolated radiochemical yield from the corresponding phenyl(aspergillitine)iodonium salt.     

Regioselective Synthesis of 1,2,3,4-Tetrasubstituted Arenes by Vicinal Functionalization of Arynes Derived from Aryl(Mes)iodonium Salts**

Herein, the synthesis of 1,2,3,4-tetrasubstituted benzenoid rings, motifs found in pharmaceutical, agrochemical, and natural products, is described.^[1] In the past, the regioselective syntheses of such compounds have been a significant challenge. This work reports a method using substituted arynes derived from aryl(Mes)iodonium salts to access a range of densely functionalized 1,2,3,4-tetrasubstituted benzenoid rings. Significantly, it was found that halide substituents are compatible under these conditions, enabling post-synthetic elaboration via palladium-catalyzed coupling. This concise strategy is predicated on two regioselective events: 1) ortho- deprotonation of aryl(Mes)iodonium salts to generate a substituted aryne intermediate, and 2) regioselective trapping of said arynes, thereby improving previously reported reaction conditions to generate arynes at room temperature and in shorter reaction times. Density functional theory (DFT) computations and linear free energy relationship (LFER) analysis suggest the regioselectivity of deprotonation is influenced by both proximal and distal ring substituents on the aryne precursor. A competition experiment further reveals the role of arene substituents on relative reactivity of aryl(Mes)iodoniums as aryne precursors.     

Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.     

Formation of benzofurans in a stoichiometric annulation reaction between stable Pallada (II) Cycles hypervalent vinyl- and alkynyl(phenyl)iodonium salts

Stable pallada(II)cycles featuring Csp²-Pd and Csp³-Pd bonds reacted with vinyl- and alkynyl(phenyl)iodonium salts to generate two new geminal carbon-carbon bonds to the terminal carbon of the vinyl and alkynyl substituents providing benzofuran and dihydrobenzofuran heterocycles. The new annulation process was rationalized by the involvement of Pd(IV) intermediates arising via an initial oxidative addition of hypervalent iodonium electrophiles to the Pd(II) center. Reaction monitoring via low temperature ¹H NMR spectroscopy was performed, and organopalladium(II) intermediates featuring a new Csp²-Csp² or Csp²-Csp bond were isolated and characterized, providing insights into the regiochemical course of the proposed mechanistic pathway.     

Hypervalent Iodine in Synthesis. 94. A Facile Synthesis of 2-Substituted-imidazo[1,2-a]pyridines by Cyclocondensation of Alkynyl(phenyl) iodonium Salts and 2-Aminopyridine

Abstract

A facile method for the synthesis of 2-substituted-imidazo[1,2-a]pyridines is achieved by cyclocondensation of alkynyl(phenyl)iodonium salts with 2-aminopyridine.     

Polymerization kinetics of phosphonic acids and esters using an iodonium initiator

Phosphonic acids are known to be useful monomers in dental restorative materials because of their good potential to provide enhanced adhesion to hydroxyapatite and their high hydrolytic stability. In this study, the photopolymerization of phosphonic acid‐based monomer via the camphorquinone (CQ)/ethyl‐4‐(dimethylaminobenzoate) (EDAB) photoredox system is compared with a ternary system composed of iodonium hexafluorophosphate and CQ/EDAB. Photocalorimetry shows that the ternary system does not provide a significant acceleration of the polymerization with either acrylamide or methacrylate phosphonic acids. The complexation of the iodonium by the phosphonic moiety of the acidic monomers leads to a lowered iodonium reactivity and reduced polarizability of the medium and as a consequence limits the rate enhancement effect normally observed by phosphonic acids on the polymerization rate. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5046–5055     

Fast atom bombardment mass spectra of iodonium salts

Positive-ion fast atom bombardment mass spectra and linked-scan tandem mass spectra were measured for aromatic iodonium salts. The mass spectra usually contain the intact cation of the iodonium salt as the base peak, fragment ions of lower abundance resulting from simple cleavages or rearrangements, and a characteristic loss of atomic iodine. High-level semi-empirical calculations suggest that an obtuse ring? I⁺? ring angle facilitates loss of atomic iodine through concomitant ring? to? ring bond formation.     

A Widely Applicable Synthetic Approach to Alk‐1‐yn‐1‐yl(polyfluoroorganyl)‐iodonium Salts [(RC≡C)(R′)I][BF4]

The reaction of alkynyldifluoroboranes RC≡CBF₂ (R = (CH₃)₃C, CF₃, (CF₃)₂CF) with organyliodine difluoride R′IF₂ bearing electron‐withdrawing polyfluoroorganyl groups R′ = C₆F₅, (CF₃)₂CFCF=CF, C₄F₉, and CF₃CH₂ leads to the corresponding alkynyl(organyl)iodonium salts [(RC≡C)(R′)I][BF₄]. This approach uses a widely applicable method as demonstrated for a representative series of polyfluorinated aryl‐, alkenyl‐, and alkyliodine difluorides. Generally, these syntheses proceed with good yields and deliver pure iodonium salts. The distinct electrophilic nature of their [(RC≡C)(R′)I]⁺ cations is deduced from multinuclear magnetic resonance data. Within the series of new iodonium salts [CF₃C≡C(C₄F₉)I][BF₄] is an intrinsic unstable one and decomposed forming CF₃C≡CI and C₄F₁₀.     

On the Reaction of 1,3-Diphenylisobenzofuran and (2-Iodoethynyl)(phenyl)iodonium Triflate. A Unique Case of Oxygen Transfer from the Diels-Alder Adduct to the Diene

Reaction of 1,3-diphenylisobenzofuran (DPIBF) with 2-(iodoethynyl)(phenyl)-iodonium triflate at room temperature gave the expected Diels-Alder adduct, but using an excess of DFIBF (2 equiv.) and performing the reaction at 55 °C or heating at this temperature during the concentration stage, the initial orange solution or product mixture became dark brown and the products 1,2-phenylene-1,2-bis(phenylmethanone) and 2-(3-iodo-1,4-diphenylnaphthyl)(phenyl)iodonium triflate were obtained, which suggests an oxygen transfer between DPIBF and the initial adduct.     

Characterization of iodonium salts differing in the anion

The properties and reactivity of a series of iodonium salts with different anions were compared. The nucleophilicity of the anions in such compounds can be characterized by their melting points and NMR spectra. When using Quinaldine Red as indicator and CH3CN as solvent, the acid release rate of the iodonium salts correlated very well with their polymerization results in acid-sensitive epoxides.     

Cationic photopolymerization of 1,3-di(9-carbazolyl)-2-propanol glycidyl ether

An absorbance probe method was used for the investigation of photolysis of cationic photoinitiators. The rates of the photolysis of diphenyliodonium hexafluorophosphate (DPIH), diphenyliodonium tetrafluoroborate (DPIB), di(tert-butylphenyl)iodonium tetrafluoroborate (DTIB), di(tert-butylphenyl)iodonium bromate (DTIBr), triphenylsulfonium hexafluorophosphate (TPS) and cyclopropyldiphenylsulfonium tetrafluoroborate (CPS) were studied in the presence of acid indicator quinaldine red (QR) in acetonitrile. Diphenyliodonium hexafluorophosphate and triphenylsulfonium hexafluorophosphate showed the highest photolysis rate. Photopolymerization of 1,3-di(9-carbazolyl)-2-propanol glycidyl ether (DCPGE) initiated with the iodonium and sulfonium salts in bulk and in solution was studied. It was established that the highest initial rate of polymerization is characteristic of DCPGE photopolymerization initiated with DPIH and TPS in bulk. The oligomers of DCPGE of number average molecular weight ( [`(M<sub>n</sub>)]\overline{M_n} ) ranging from 710 to 1220 were obtained in these reactions in bulk and those with [`(M_n)]\overline{M_n} ranging from 1300 to 1600 were obtained in solution.     

Theoretical study on the reaction mechanism of Pd(OAc)2-catalyzed trifluoroethylation: Role of additive CF3COOH

The mechanism of Pd(OAc)₂-catalyzed trifluoroethylation of aromatic systems is explored using the density function theory (DFT) computations. The calculation results indicate that the whole catalytic cycle involves a coordinated process of catalyst Pd(OAc)₂ with acetanilide 1a, a C–H bond activation and a two-step migration of CF₃CH₂– group. The interesting role of additive (CF₃COOH) is that it can react with substrate 2a (mesityl(trifluoroethyl)iodonium triflate) to form an active species mesityl(trifluoroethyl)iodonium trifluoroacetate 2a′. 2a′ can assist the C–H activation to decrease the rate-limiting free energy barrier of the catalytic reaction by changing the rate-limiting step from the transferring process of CF₃CH₂– group to the C–H bond activation.     

The reaction of acetic acid 2‐selenoxo‐2H‐pyridin‐1‐yl esters with benzynes: A convenient route to Benzo[b]seleno[2,3‐b]pyridines

Benzyne and its 3,4,5,6‐tetraphenyl, 3‐ and 4‐methyl, 3‐methoxy and 4,5‐difluoro derivatives react with acetic acid 2‐selenoxo‐2H‐pyridin‐1‐yl esters 4a‐e to give benzo[b]seleno[2,3‐b]pyridines 10–15 in modest yields. The benzynes were generated by one or more of the following methods: diazotization of anthranilic acids 5a‐g with isoamyl nitrate; mild thermal decomposition of 2‐diazoniobenzenecarboxylate hydrochlorides 6a‐d treatment of (phenyl)[o‐(trimethylsilyl)phenyl]iodonium triflate (7) with tetrabutylammonium fluoride; and treatment of 2‐trimethylsilylphenyl triflates 8a‐c with cesium fluoride. In all the reactions, the corresponding 2‐(methylselenenyl)pyridines 16a‐d were also obtained suggesting that these reactions may involve selenium addition to benzyne via a SET (single electron transfer).     

127I NQR spectra in several iodonium compounds

Interionic coordination interactions and their relationship to the behaviour of NQR spectral parameters, e²Qq_zz, η and ϑν/ϑE_z have been studied for several unsubstituted iodonium salts. The quadrupole coupling constants, e²Qq_zz, ha found to be linearly related to the asymmetry parameter, η.