储存环光学速调管磁场分析

在合肥国家同步辐射实验室的储存环上，插入件光学速调管已安装完成，对光学速调管的磁场分布进行了一些附加测量，分析了横向磁场的空间谐波分量；测量了积分场的分布，对积分场变化的原因作了一定探讨。还测量了磁场横向分布的均匀度，为将要进行的相干辐射和自由电子激光研究提供实验数据；最后用实测的磁场对光学速调管自发辐射进行了数值模拟，结果表明这个光学速调管基本上满足实验要求。     

加深光学速调管自发辐射谱调制的研究

相干谐波储存环自由电子激光的相干增强因子正比于光学速调管自发辐射谱调制率的平方,加深光学速调管自发辐射谱的调制是相干谐波储存环自由电子激光研究的重要一环.介绍在中国科学技术大学800MeV电子储存环上所进行的加深光学速调管自发辐射谱调制的研究工作,调制率已从0.236提高到了0.80,为相干谐波产生实验奠定了基础.     

储存环相干谐波自由电子激光器新光学速调管工作状态分析

 合肥国家同步辐射实验室（NSRL）正在开展储存环相干谐波自由电子激光研究，为了在较高电子束能量下进行实验、且具有较高的相干辐射强度，光学速调管从原来的对称结构改造为非对称结构。分析了相干谐波实验中各参数之间的关系，及对相干谐波辐射的影响，并给出了两种工作状态下的最佳工作参数。     

合肥储存环相干谐波自由电子激光研究方法的改进

 根据简单的计算模型,导出辐射能量谱形状因子和相干谐波辐射表达式,用此表达式讨论了不对称光学速调管的相干谐波辐射;对于合肥储存环相干谐波自由电子激光,提出了一个不对称光学速调管相干谐波辐射的研究方案,并且作了详细的计算,结果表明在较高的电子束能量下,调整光学速调管和外激光参数,使辐射段波荡器的辐射基波与外激光的二次谐波共振,进行相干谐波产生实验,能获得10⁹量级相干加强因子。     

FEL光学速调管的升级性能分析

通过三维磁场的有限元计算,给出了自由电子激光（FEL）研究用光学速调管升级后的磁参数。国家同步辐射实验室合肥光源（HLS）电子储存环能量可以日常运行在200～800 MeV间,为了与电子储存环能量匹配,并在较高束电子能量下进行实验和得到较多的相干辐射光子,光学速调管从原来的对称结构升级成非对称结构,用于HLS储存环谐波产生FEL实验。给出了升级后非对称光学速调管的几组匹配磁参数,用于在HLS储存环注入能量和可以运行的最高能量下进行谐波FEL实验。初步计算表明,HLS 储存环电子束性能优越,能散很低,FEL实验用最高能散仅为2.05×10-4,相应FEL辐射的能散修正因子在0.96以上,可以忽略不计。     

光学速调管自发辐射谱的测量及调制率的提高

 在国家同步辐射实验室(NSRL)800MeV 电子储存环上进行的相干谐波储存环自由电子激光研究中, 测量了光学速调管的自发辐射谱并提高了它的调制率。     

提高相干谐波输出的一种新方法

本文利用自由电子激光(FEL)纵模统一理论讨论了光学速调管自由电子激光相干谐波的输出情况。从物理上分析了非对称光学速调管的设计,得出了采用非对称的光学速调管可使FEL的相干谐波输出提高近30％。     

光学高速调管磁场测量和磁场误差分析

给出了储存环光学速调管磁场的测量结果，包括轴向分布、横向分布的均匀度以及积分场分布，分析了磁场分布的随机误差和系统误差，计算了积分多极的大小；讨论了非零积分场引起的闭轨畸变和对储存环工作点的影响。     

相干谐波储存环自由电子激光

相干谐波自由电子激光不用光学谐振腔及反射镜,可望工作在紫外和真空紫外光波段,是第四代同步辐射光源的可能途径之一。由于对束流品质要求很高,相干谐波自由电子激光首先是以储存环作为驱动器而发展起来的。由于光阴极微波电子枪的发展和直线加速器技术的进步,目前,已开始有直线加速器驱动的高增益相干谐波自由电子激光的建议。文章介绍了相干谐波储存环自由电子激光的原理、现状及展望。     

光学速调管磁场测量和磁场误差分析

 给出了储存环光学速调管磁场的测量结果,包括轴向分布、横向分布均匀度以及积分场分布;分析了磁场分布的随机误差和系统误差,计算了积分多极场的大小; 讨论了非零积分场引起的闭轨畸变和对储存环工作点的影响。     

CHG-SRFEL光学速调管磁极间隙全闭环控制系统

 描述了CHG-SRFEL光学速调管磁极间隙全闭环控制系统的原理，给出了系统硬件结构和软件设计。可独立或同步调节光学速调管调制段、色散段及辐射段磁极间隙的大小，分辨率达到20μm，精度达到5μm。通过改进系统位置监测设备，可进一步提高分辨率及精度。系统已经在光学速调管磁场测量、垫补中使用，具有精度高、安全性高、操作方便等特点。     

纯永磁波荡器基波与谐波磁场的三维计算与测试

 对标淮的纯永磁波荡器进行了三维磁场的有限元计算,给出了纯永磁波荡器的基波与谐波磁场的幅值与相位,并与测试结果进行对比,结果表明,标准的纯永磁波荡器谐波磁场幅值比基波幅值低两个数量级。     

磁场误差对电子束能量调制的影响

 根据实测的磁场分布误差,对合肥同步辐射环上光学速调管中电子束能量调制的影响进了分析和讨论。结果表明磁场峰值误差对电子束能量调制的影响不大。     

High-order MR shimming: a simulation study of the effectiveness of competing methods, using an established susceptibility model of the human head

The first step in the process of shimming a magnetic field is to characterize it by obtaining a field map and decomposing that map into a convenient set of basis functions. The strength of each member of the set is then calculated. Finally, a set of correction elements which generate fields corresponding to the same spatial distribution as the basis functions is energized so that the sum of their fields and the error fields is substantially zero. The basis functions used typically are solutions to Laplace’s equation and have been shown to be very effective when the region of interest is substantially free space. This paper addresses issues associated with shimming the magnetic field in a region in which there is a distribution of materials with different susceptibilities and which therefore is not free space. In such a region, Laplace’s equation is no longer valid and in principle cannot be used to describe the magnetic field there. It is demonstrated that in spite of this, the same set of basis functions suffices for analyzing the field and the same set of elements suffices for correcting the field. The motivation for this study stems from the need to improve the magnetic field homogeneity when biological specimens are being imaged by magnetic resonance. In particular, this paper describes a study carried out by various simulated shimming strategies to improve the uniformity of the magnetic field over a multitissue model of susceptibility of the human head. The topics of magnetic susceptibility, the effect of shimming on MR images, shimming hardware and shimming methods are briefly reviewed. Two slices of the human head model were selected for detailed study, both offset inferior to the origin and including the base of the brain and the anterior sinus. The results of the study include comparisons between the strategies of global shimming, local slice-selective shimming and combinations of the two; the effects of shimming to various orders of spherical harmonics; and the effects of rotation and displacement of the head with respect to the shim frame of reference.     

场分析法与阻抗叠加方法在速调管输出腔间隙阻抗计算中的应用

 从分析速调管输出回路的电磁场分量入手，结合微波电路理论，提出了计算速调管输出回路间隙阻抗的场分析法。对于在谐振模式交叠频带上，群聚电子束电流同时与各模式的阻抗相作用，总阻抗是各模式阻抗的代数叠加的情况，提出了阻抗叠加方法。该方法原则上可求解任意给定间隙电阻所对应的间隙电抗值。计算表明，场分析法与等效间隙阻抗法计算结果最大相对误差为1.5％，阻抗叠加方法计算结果与冷测数据最大相对误差为10％。分析表明，多个谐振模式的引进是速调管输出腔加载滤波器展宽频带的物理实质。     

小型回旋加速器全自动化磁场测量和精密垫补平台研制

针对核医学诊疗对PET医用放射性核素的需求,中国原子能科学研究院正在开展PET医用小型回旋加速器的产业化研究。磁场测量和垫补是回旋加速器生产中的必经环节,小型回旋加速器结构紧凑实现磁场测量仪的全自动化控制是一个难点,解决常规垫补方法加工成本高和周期长的问题是产业化生产的关键。本文详细介绍小型回旋加速器全自动化磁场测量和精密垫补平台的研制,通过多台小型回旋加速器的磁场测量和垫补实践,发展一套快速磁场测量和垫补流程,实现全自动化测量方法缩短磁场测量周期,采用精密垫补算法减少垫补次数。在保证磁场测量和垫补工作高效高质量完成的条件下,极大降低了时间和加工成本,为小型回旋加速器的产业化生产打下基础。目前,中国原子能科学研究院已经完成多台小型回旋加速器的商业化落地。     

STUDY ON THE RADIATION ACOUSTIC FIELD OF RECTANGULAR RADIATORS IN FLEXURAL VIBRATION

In this paper, the radiation acoustic field of a rectangular radiator in flexural vibration is studied. The radiator is a rectangular thin plate in flexural vibration with simply supported boundary conditions. Based on the theory of Rayleigh integral, the acoustic pressure distribution of the radiator in its far field is obtained analytically and the near acoustic field of the radiator is also computed numerically. In the near field, the three-dimensional acoustic pressure distribution is obtained. In the far field, the two- and three-dimensional acoustic pressure distribution patterns are calculated. The dependence of the radiation acoustic pressure of the radiator on the vibrational order of the plate in flexural vibration is analyzed. It is demonstrated that the radiation acoustic pressure along the central axis of the radiator is always zero in the near and far acoustic fields, and the radiation near acoustic field and the far acoustic field are both directional. This is different from the acoustic field generated by an oscillating piston. On the other hand, when the vibrational order is increased, the acoustic pressure distribution of the radiator becomes complex.     

光学元件波前畸变对驱动器光路设计的影响

高功率激光驱动器光路设计要考虑像传递、鬼像规避和杂散光管理等多项优化措施.基于衍射光学传播理论,从输出负载能力提升的角度研究大口径光学元件波前特性对驱动器光路设计参数优化的影响.研究表明,驱动器末级光路的排布间隔如果控制在6 m以上,将非常有助于提高激光驱动器的输出负载能力.一般情况下,波前峰谷值达到0.34λ的单块大口径光学元件能使高功率激光的近场光束质量最大下降约10%,达到1.36λ后最大下降约21%;波前分布特性不同的多片大口径光学元件的波前相消叠加有利于降低中频波前部分对装置负载能力的影响,但是,大口径光学元件的非线性效应会加重中频波前对装置输出负载能力的影响;在限定大口径元件损伤阈值20J/cm~2的前提下,光路排布紧凑的激光驱动器末级输入激光通量控制在16.8J/cm~2之下不易损伤光学元件.相对宽松的光路设计可以进一步提高末级输出激光的平均通量水平,非常有利于激光驱动器装置输出负载能力的提升.     

Dynamic B0 shimming at 7 T

Dynamic slice-wise shimming improves B₀ field homogeneity by updating shim coil currents for every slice in a multislice acquisition, producing better field homogeneity over a volume than can be obtained by a single static global shim. The first aim of this work was to evaluate the performance of slice-wise field-map-based second-order dynamic shimming in a human high-field 7 T clinical scanner vis-à-vis image based second order static global shimming. Another goal was to characterize eddy currents induced by second and third order shim switching. A final aim was to compare global and dynamic shimming through shim orders to elucidate the relative benefits of going to higher orders and to dynamic shim updating from a static shimming regime. An external hardware module was used to store and dynamically update slice-optimized shim values during multislice data acquisition. High-bandwidth multislice gradient echo scans with B₀ field mapping and low-bandwidth single-shot echo planar scans were performed on phantoms and humans using second-order dynamic and static global shims. For the measurement of second and third order shim induced eddy currents, step response temporal phase changes of individual shims were measured and fit to shim harmonics spatially and to multiexponential decay functions temporally. Finally, an order-wise field-map-based comparison was performed with first, second and third order global static shimming, first and second order dynamic shimming, as well as combined second or third order global and first order dynamic shim. Dynamic shimming considerably improved B₀ homogeneity compared to static global shimming both in phantoms and in human subjects, reducing image distortion and signal dropout. The unshielded second and third order shims generated strong B₀ and self and cross-term eddy fields, with multiple time constants ranging from milliseconds to seconds. Field homogeneity improved with increasing order of shim, with dynamic shimming performing better than global shimming. Hybrid global and dynamic shimming approach yielded field homogeneity better than global static shims but worse than dynamic shims.