Quantum-chemical study of the interface formed by carboxylic species on TiO<Subscript>2</Subscript> nanoparticles. 1. Nanoparticle surface

The current paper presents results of a quantum-chemical study of the surface structure of nanoparticles of both rutile and anatase crystallographic modifications. Different stages of the surface relaxation are discussed. Water adsorption is considered. The calculations were performed in the spd-basis by using semi-empirical quantum-chemical codes, both sequential and parallel. The results are mainly addressed to the study of the interface formed by titania nanoparticles and a set of carboxylated species, namely, benzoic, bi-isonicotinic acids as well as tris-(2,2′-dcbipyridine) Fe(II) complex placed on the surface of either rutile or anatase polymorphs.This revised version was published online in August 2005 with a corrected issue number.     

Carboxylic species adsorption on TiO<Subscript>2</Subscript> nanoparticles

We present the results of a quantum-chemical study of the interface formed by titania nanoparticles and a set of carboxylic moieties, namely, benzoic and bi-isonicotinic acids and a tris-(2, 2′-dcbipyridine) Fe (II) complex placed on the surface of either rutile or anatase polymorphs. The calculations were performed in the spd basis using semiempirical quantum-chemical codes, both sequential and parallel. The results are mainly addressed to the geometry optimization of the adsorbed molecules on the surface, as well as to the adsorption mechanism and the energy of adsorption. The text was submitted by the authors in English.     

Dynamic nucleation and growth of Ni nanoparticles on high-surface area titania

Nucleation and growth mechanisms of Ni nanoparticles synthesized via an incipient wetness technique on a high-surface area titania support (i.e., a mixture of anatase and rutile) are studied using environmental transmission electron microscope (ETEM). Most Ni nanoparticles are found to nucleate from the Ni precursor coated on the surface of the titania support. Even though both anatase and rutile supports are the nucleation sites for Ni nanoparticles, it was observed that the particles have different morphologies on the supports, i.e., a non-wetting morphology on the anatase support versus a wetting morphology on the rutile {1 0 1}. This is because the interfacial energy of Ni/rutile is lower than that of Ni/anatase. Titania clusters are found to nucleate on the surface of the Ni particles during in situ ETEM reduction, indicating that the presence of partial titania overlayers is directly related to the synthesis of the Ni/TiO₂ catalysts. The growth mode of the Ni nanoparticles on the titania support is three-dimensional, while that of the rutile cluster on the surface of the Ni is two-dimensional layer-by-layer.     

Investigation on SERS of different phase structure TiO2 nanoparticles

In this paper, anatase and rutile TiO₂ nanoparticles as well as their mixed crystal phase structure TiO₂ nanoparticles were synthesized by a sol‐hydrothermal method, and were served as active substrates for surface‐enhanced Raman scattering (SERS) study. The results show that the 4‐mercaptobenzoic acid probe molecules exhibit different degree SERS enhancements on the surface of different phase structure TiO₂ nanoparticles. The mixed crystal structure TiO₂ with an appropriate proportion of anatase and rutile phase is favourable to SERS enhancement of adsorbed molecules. These are mainly attributed to the contributions of the TiO₂‐to‐molecule charge transfer mechanism and the mixed crystal effect. Copyright © 2015 John Wiley & Sons, Ltd.     

Oxygen defect dependent variation of band gap,Urbach energy and luminescence property of anatase,anatase–rutile mixed phase and of rutile phases of TiO2 nanoparticles

TiO₂ nanoparticles are prepared by a sol–gel method and annealed both in air and vacuum at different temperatures to obtain anatase, anatase–rutile mixed phase and rutile TiO₂ nanoparticles. The phase conversion from anatase to anatase–rutile mixed phase and to rutile phase takes place via interface nucleation between adjoint anatase nanocrystallites and annealing temperature and defects take the initiate in this phase transformation. The samples are characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–vis and photoluminescence spectroscopy (PL). Anatase TiO₂ exhibits a defect related absorption hump in the visible region, which is otherwise absent in the air annealed samples. The Urbach energy is very high in the vacuum annealed and in the anatase–rutile mixed phase TiO₂. Vacuum annealed anatase TiO₂ has the lowest emission intensity, whereas an intense emission is seen in its air annealed counterpart. The oxygen vacancies in the vacuum annealed samples act as non-radiative recombination centers and quench the emission intensity. Oxygen deficient anatase TiO₂ has the longest carrier lifetime. Time resolved spectroscopy measurement shows that the oxygen vacancies act as efficient trap centers of electrons and reduce the recombination time of the charge carriers.     

Silver-Doping Induced Lattice Distortion in TiO2 Nanoparticles

The Ag-doping effects on Ti02 nanoparticles are investigated by means of x-ray diffraction （XRD） and Raman scattering spectroscopy. XRD and Raman results indicate that Ag-doping stabilizes the rutile phase in TiO2. We find an Ag-doping induced lattice expansion in both anatase and rutile phases. The Ag-doping has different influences on the lattice distortion for anatase and rutile phases, that is, the e/a-value for the anatase phase decreases with 0.5% Ag-doping and then increases with 1~ Ag-doping while that for the rutile phase shows a gradual increase with increasing Ag-doping. We have ascribed the different variations of lattice distortion due to Ag-doping to the change of interracial interaction between the anatase and rutile phases induced by different Ag concentrations.     

Maintaining particle size in the transformation of anatase to rutile titania nanostructures

We study the temperature-dependent transformation of two distinctly synthesized TiO₂ nanoparticles from the anatase to the rutile phase. These studies are carried out over the temperature range extending from room temperature to an excess of 800 °C where the anatase to rutile conversion is found to occur. Results obtained for both a sol-gel-generated nanocolloid (3-20 nm) and a sol-gel-generated micelle nanostructure (∼40 nm) are evaluated. While the TiO₂ nanocolloid structures aggregate to form larger crystallites as a function of increasing temperature with sizes comparable to the sol-gel-generated micelle structures, the resulting anatase crystallites, which are of a diameter 40-50 nm, appear to transform to comparable or slightly smaller rutile structures at 800 °C. This is in contrast to the transformation to larger rutile structures, observed for larger anatase particles. The importance of kinetic effects is considered as it enhances the rate of anatase to rutile conversion. These characteristics are established using a combination of Raman spectroscopic, X-ray diffraction, and scanning electron microscopy. The relative playoffs of the Raman and X-ray diffraction techniques are considered as they are used for the analysis of particles at the nanoscale, especially when phase transformations are evaluated.     

Structural transformation study of TiO2 nanoparticles annealing at different temperatures and the photodegradation process of eosin-Y

Hydrothermal method was used to prepare TiO₂ nanoparticles with annealing temperature at 500 °C–700 °C. The mixture of anatase-rutile phase was investigated by powerful tool of X-ray diffraction (XRD). The structural parameters of anatase and rutile mixture phaseTiO₂ nanoparticles were calculated from the Rietveld refinement. The transformation rate of rutile was increased linearly with an annealing temperature of 500 °C–700 °C. The spherical morphology of the anatase and rutile mixed phase were obtained by scanning electron microscope and transmission electron microscope. The spherical particle of the anatase and rutile TiO₂ shows with great aggregation with different size and within the range of few tens nm. The EDAX study revealed the presence of titanium and oxygen. The best photocatalytic activity was identified as the 87.04% of anatase and 12.96% of rutile mixer phase of TiO₂. Various factors could be involved for a better photocatalytic activity.     

热处理对爆轰合成的纳米TiO_2混晶的结构相变的影响

采用爆轰法制备了纳米TiO2混晶体,初步研究了不同煅烧温度(600℃和720℃)和不同煅烧时间(1 h,2 h,3.5 h和5 h)对其微结构和结构相变行为的影响,并应用热动力学理论讨论了从锐钛矿相到金红石相的结构相变过程和相变机理.研究表明:随着煅烧温度的升高和煅烧时间的增加,纳米TiO2的粒径逐渐增大,混晶中金红石相的含量逐渐提高.与常规方法制备的纳米TiO2不同的是,在相同煅烧温度和煅烧时间下金红石相的平均生长速率明显低于锐钛矿相.锐钛矿相完全相变为金红石的温度也明显低于常规方法报道的相变温度.该研究会对控制纳米TiO2晶体尺寸和批量合成提供一定的理论和实验指导.     

Influence of phonon confinement,surface stress,and zirconium doping on the Raman vibrational properties of anatase TiO2 nanoparticles

We present a comprehensive analysis of the Raman spectra of pure and zirconium‐doped anatase TiO₂ nanoparticles. To account for the wavenumber shifts of the E_g(ν₆) mode as a function of particle size (L) and dopant concentration (x), a modification of the standard phonon confinement model (PCM) is introduced, which takes into account the contribution of surface stress by means of the Laplace–Young equation. Together with X‐ray diffraction (XRD) and transmission electron microscopy data, our analysis shows that the surface stress contribution to the observed blue shift of the Raman wavenumber is of the same magnitude as the spatial phonon confinement effect. Annealing experiments show that Zr‐doped nanoparticles exhibit retarded grain growth and delayed anatase‐to‐rutile phase transition by up to 200 K compared to pure anatase TiO₂. XRD shows that Zr doping leads to a unit cell expansion of the anatase structure. Applying the modified PCM to the x‐dependent variations of the E_g(ν₆) Raman mode, the mode‐Grüneisen parameter is found to increase abruptly at x > 0.07 with a concomitant mode softening. This coincides with the x range over which the Zr cations are reported to be displaced from their position in the tetrahedral lattice, and where Zr precipitation occurs upon annealing. The results have implications for the interpretation of Raman spectra of ionic metal oxide nanoparticles and how these are modified upon cation doping. Copyright © 2011 John Wiley & Sons, Ltd.     

Optical investigation on sulfur-doping effects in titanium dioxide nanoparticles

The sulfur-doping (S-doping) effects in TiO₂ nanoparticles are investigated by means of Raman spectroscopy and UV–Vis spectroscopy with different S-doping levels (10 and 50%). Raman spectra indicate that the rutile and anatase phases dominate for the low S-doped (10%) and high S-doped (50%) TiO₂ nanoparticles, respectively. The variation of phase with different S-doping levels has been ascribed to the different S-doping processes into TiO₂ nanoparticles. In addition, an extra absorption band is observed in both the S-doped TiO₂ nanoparticles. With increasing S-doping level from 10 to 50%, the extra absorption band shows a blue-shift from 470 to 445 nm, which may be ascribed to the variation of phase from rutile to anatase for TiO₂.     

Effect of annealing on TiO2 nanoparticles

TiO₂ nanoparticles have been prepared by simple chemical precipitation method and annealed at different temperatures. The as-prepared TiO₂ are amorphous, and they transform into anatase phase on annealing at 450 °C, and rutile phase on annealing at 900 °C. The X-ray diffraction results showed that TiO₂ nanoparticles with grain size in the range of 21–24 nm for anatase phase and 69–74 nm for rutile phase have been obtained. FESEM images show the formation of TiO₂ nanoparticles with small size in structure. The FTIR and Raman spectra exhibited peaks corresponding to the anatase and rutile structure phases of TiO₂. Optical absorption studies reveal that the absorption edge shifts towards longer wavelength (red shift) with increase of annealing temperature.     

Phase transition and thermodynamic properties of TiO2 from first-principles calculations

The pressure induced phase transitions of TiO2 from anatase to columbite structure and from rutile to columbite structure and the temperature induced phase transition from anatase to rutile structure and from columbite to rutile structure are investigated by ab initio plane-wave pseudopotential density functional theory method(DFT),together with quasi-harmonic Debye model.It is found that the zero-temperature transition pressures from anatase to columbite and from rutile to columbite are 4.55 GPa and 19.92 GPa,respectively.The zero-pressure transition temperatures from anatase to rutile and from columbite to rutile are 950 K and 1500 K,respectively.Our results are consistent with the available experimental data and other theoretical results.Moreover,the dependence of the normalized primitive cell volume V/V0 on pressure and the dependences of thermal expansion coefficient α on temperature and pressure are also obtained successfully.     

Characteristics of grain growth of microarc oxidation coatings on pure titanium

Grainy titania coatings are prepared by microarc oxidation on pure titanium （TA2） substrates in a Na2SiO3NaF electrolytic solution. The coating thickness is measured by an optical microscope with a CCD camera. Scanning electron microscope （SEM） and x-ray diffraction （XRD） are employed to characterize the microstructure and phase composition of coatings. The results show that the coating thickness increases linearly as the treatment time increases. The coatings are mainly composed of anatase and rutile （TiO2）. With the increase of treatment time, the predominant phase composition varies from anatase to rutile, which indicates that phase transformation of anatase into rutile occurs in the oxidizing process. Meanwhile, the size of grains existing on the coating surface increases and thus the surface becomes much coarser.     

Preparation of F-doped titania nanoparticles with a highly thermally stable anatase phase by alcoholysis of TiCl4

Pure anatase is a metastable phase and inclined to (transform) be transformed into rutile structure under heating over than 500 °C, which limits its suitability for high-temperature applications. Hitherto much research efforts have been made to increase the stability temperature of anatase structure. However, metallic doping usually introduced metallic oxides into titania at high temperature, and many nonmetallic doping are not competent for increasing the stability temperature of anatase structure up to 900 °C. In this study, F-doped anatase TiO₂ nanoparticles were conveniently prepared via the alcoholysis of TiCl₄ and the as-prepared product shows very high stability temperature up to 1000 °C before being transformed into rutile structure phase. On the basis of XPS results of F-doped titania annealed at different temperature, it is learned that the F atoms were anchored on the crystal planes of anatase in favor of decreasing the energy faces of anatase and stabilizing the anatase structure till annealed at 1300 °C all the anatase were transformed into rutile phase.     

Effect of ambient pressure on the crystalline phase of nano TiO2 particles synthesized by a dc thermal plasma reactor

The synthesis of nanoparticles of titanium dioxide (TiO₂) with varying percentages of anatase and rutile phases is reported. This was achieved by controlling the operating pressure in a transferred-arc, direct current thermal plasma reactor in which titanium vapors are evaporated, and then exposed to ambient oxygen. The average particle size remained around 15 nm in each case. The crystalline structure of the as-synthesized nanoparticles of TiO₂ was studied with X-ray diffraction analysis; whereas the particle morphology was investigated with the help of transmission electron microscopy. The precursor species responsible for the growth of these nanoparticles was studied with the help of optical emission spectroscopy. As inferred from the X-ray diffraction analysis, the relative abundance of anatase TiO₂ was found to be dominant when synthesized at 760 Torr, and the same showed a decreasing trend with decreasing chamber pressure. The study also reveals that anatase TiO₂ is a more effective photocatalytic agent in degrading methylene blue by comparison to its rutile phase.     

纳米金红石TiO2光催化剂的水解合成及其性能

采用水解法在323 K制备了比表面积较大的纳米金红石TiO₂光催化剂,并通过X射线衍射（XRD）、BET比表面积测试法、紫外-可见吸收光谱（UV-Vis）、红外光谱（IR）和光电化学（PEC）测量对纳米光催化剂进行了表征。以甲基橙为光催化反应的模型化合物,在比表面积相近的条件下,对纳米金红石和锐钛矿TiO₂光催化剂的光催化活性进行了评价。光催化实验结果表明：比表面积为～95 m2·g-1时,比表面积相近的金红石和锐钛矿的紫外光催化活性相当, 但金红石的可见光催化活性明显高于锐钛矿的可见光催化活性。光电化学实验表明: 在紫外光照射下催化剂的光电流密度从弱到强的顺序与其紫外光催化活性从低到高的次序一致。     

Magnéli相亚氧化钛的莫特相变和磁电性能的模拟计算

基于密度泛函理论框架下的第一性原理平面波超软赝势方法,构建纯的单胞与金红石型和锐钛矿型TiO_1.9375超胞模型,并对模型进行了几何结构优化、能带结构分布和态密度分布的计算. 结果表明,与纯的单胞相比,金红石和锐钛矿Magnéli相TiO_1.9375体系体积均变大,稳定性略下降,而且都发生了莫特相变. 其中锐钛矿Magnéli相亚氧化钛表现没有磁性,金红石Magnéli相亚氧化钛有磁性. 锐钛矿Magnéli相亚氧化钛的导电性能比金红石Magnéli相亚氧化钛强. 计算结果与实验结果相一致. 关键词： Magnéli相亚氧化钛 莫特相变 磁电性能 第一性原理     

Immobilization of bovine serum albumin on TiO2 film via chemisorption of H3PO4 interface and effects on platelets adhesion

In the present study, bovine serum albumin (BSA) was successfully covalently immobilized on the surface of anatase TiO₂ film by a three-step method, i.e. application of H₃PO₄ chemisorption to increase surface -OH, which increases the amount of coupling 3-aminopropyl-triethoxylsilane (APTES), thus linking with BSA by imide bond using EDC/NHS/MES. There is no significant -OH group increase on rutile film when using the same method of phosphoric acid treatment, which suggest it is difficult for further chemical modification of the rutile film. After covalent immobilization of BSA on anatase film, an improved hemocompatibility of anti-platelet adhesion and aggregation in vitro could be recognized by LDH and SEM analysis. This study suggests BSA-immobilized anatase surface can serve as hemocompatibility material in vivo.     

Solar light decomposition of DFP on the surface of anatase and rutile TiO2 prepared by hydrothermal treatment of microemulsions

The photocatalytic decomposition of diisopropylfluorophosphate (DFP) over nanostructured anatase and rutile TiO₂ powder was investigated by FTIR and XPS. Upon irradiation with artificial solar light DFP decomposed on both polymorphs as evidenced by FTIR. For both crystalline structures acetone and subsequently coordinated formate and carbonate were observed on the surface during the photocatalytic reaction as the isopropyl groups dissociated from DFP. XPS revealed that small amounts of phosphates and inorganic fluoride (TiF) gradually built up on both TiO₂ surfaces, while organic F was present only on the rutile phase. From repeated cycles of intermittent DFP adsorption and irradiation measurements, the decomposition rates and formation of residuals on the surface were deduced. It was found that the overall oxidation yield is higher on anatase than rutile. The oxidation rate decreases with increasing irradiation time, an effect that is more pronounced on rutile. We find that both the difference between the polymorphs and the initial decrease of the oxidation yield can largely be explained by variations in surface area rather than poisoning by PO_x or F species. In particular, we observe a dramatic decrease of the specific area of rutile as a function of photocatalytic oxidation cycle.