可聚合的光引发转移终止剂合成接枝共聚物

采用一种可聚合的光引发转移终止剂 ,2 N ,N 二乙基二硫代氨基甲酰氧基乙酸 β 甲基丙烯酰氧基乙酯 (MAEDCA) ,通过两种途径制备了含有聚甲基丙烯酸甲酯 (PMMA)和聚苯乙烯 (PSt)链段的接枝共聚物 .其一是将MAEDCA作为引发剂 ,在紫外光照射下引发MMA聚合 ,得到大分子单体 ,通过大分子单体与St的共聚合得到 .考察了所用大分子单体的分子量和浓度对共聚合的影响 .其二是将MAEDCA作为单体与MMA共聚得到侧链上含有N ,N 二乙基二硫代氨基甲酰氧基 (DC)基团的无规共聚物 ,P(MMA co MAEDCA) .在紫外光照射下 ,P(MMA co MAEDCA)作为大分子引发剂引发St聚合 ,得到P(MMA co MAEDCA) g PSt的共聚物 ,研究了接枝共聚合过程的活性自由基聚合特征     

用引发转移终止剂制备嵌段和接枝共聚物

介绍了引发转移终止剂(Iniferter)的概念及其引发“活性”自由基聚合的原理。综述了Iniferter在制备ABA型三嵌段共聚物和接枝共聚物中的应用和发展。     

BDC作为Iniferter引发苯乙烯聚合的研究

本文研究了由BDC(N,N-二乙基二硫代氨基甲酸苄酯)作为Iniferter(引发-转移-终止剂)引发苯乙烯的光聚合反应。发现转化率和分子量均随时间逐步增大,反应生成带有起始功能端基的聚合物。从顺磁谱可见BDC在光照射下分解生成的小分子自由基[·SSCN-(C_2H_5)_2]及较活泼的苄基自由基引发苯乙烯聚合产生的大分子增长自由基。探讨了这种活性自由基聚合反应机理。     

支化PEG-b-PCL嵌段共聚合物的合成

以聚乙二醇甲基丙烯酸酯(PEGMA)为大分子引发剂进行ε-己内酯的酶催化开环聚合, 合成出嵌段共聚物, 然后将其转化成大分子引发剂型单体(Macroinimer), 最后通过原子转移自由基聚合(ATRP)制备出一种新型结构的嵌段型支化聚合物.     

引发转移终止剂技术合成含有聚异戊二烯链段的三嵌段共聚物

含聚异戊二烯 (ＰＩＰ)链段的嵌段共聚物有着广泛的应用[1～ 3 ] ,有关它的合成、性能表征及应用方面的研究一直是学术及工业界的研究热点 .传统上 ,含有ＰＩＰ链段的嵌段共聚物用活性负离子聚合的方法来合成 ,例如 :聚苯乙烯 聚异戊二烯嵌段共聚物[3 ,4 ] .这是由聚合物增长链端的特殊活性所决定的 ,采用活性负离子聚合方法 ,不但能很好地控制共聚物的分子量和分子量分布 ,而且能控制共聚物中各组分的比例 .但是 ,负离子聚合通常需在较苛刻的条件下进行 ,如低温高真空、高纯度的单体和溶剂 ,而且能用于负离子聚合的单体也有限 .相对而言 ,…     

“活”的α-甲基苯乙烯共聚物:聚合反应新化学和材料工程新技术

高于临界聚合反应温度时,α-甲基苯乙烯(AMS)单体和其聚合物处于聚合-解聚平衡.基于AMS聚合物在受热时可裂解生成大分子链自由基的特性,提出了含AMS结构单元的共聚物是一种"活"的,可作为大分子自由基引发剂的概念,并通过实验对AMS共聚物的引发性能和应用进行了研究.首先,合成了AMS与(甲基)丙烯酸酯类单体、丙烯酸、苯乙烯和马来酸酐等的共聚物.然后以上述共聚物为大分子引发剂,在90℃引发(甲基)丙烯酸酯类单体和苯乙烯等的本体聚合、溶液聚合和乳液聚合,得到了嵌段共聚物.用ESR谱证明了AMS的共聚物在加热时能裂解生成以碳原子为中心的大分子链自由基.此外,在聚合物的熔融共混中,AMS分解产生的大分子链自由基通过偶合反应形成接枝链,原位生成相容剂.AMS共聚物还可以对碳纳米管及无机粒子进行表面原位接枝改性.AMS共聚物是一类无小分子残留的绿色自由基引发剂,可以用于低成本制备两嵌段共聚物,也可以用于聚合物的熔融共混增容.     

双官能团引发剂进行的基团转移嵌段共聚

嵌段共聚物的合成技术有较大的可靠性和预见性,并可提供别的聚合物所不能达到的特殊性能。用基团转移聚合的方法进行丙烯酸酯类极性单体室温下的活性聚合,能得到具有预定链长、嵌段纯度和多分散性指数小的嵌段共聚物。用双官能团引发剂进行基团转移嵌段共聚,可减少加单体的次数,避免引进杂质,且能合成用单官能团引发剂所无法得到的A—B—     

用大分子引发剂法制备嵌段共聚物

主要介绍了用大分子引发剂法制备嵌段共聚物的方法。大分子引发剂是从已商品化的功能聚合物制得或用其它活性聚合方法合成。从单封端的端羟基聚合物、其它单官能团或双官能团聚合物以及双功能基团缩聚物制得大分子引发剂．然后用于原子转移自由基聚合(ATRP)、氮氧稳定自由基聚合以及可逆加成裂解链转移(RAFT)聚合等．可制得结构可控、分子量分布窄的嵌段共聚物。     

高分子化学课程中若干论题的进展

高分子化学课程中下列五个论题被加以修正和补充:(1)1,2-二取代乙烯单体的聚合;(2)乙烯基单体聚合时的键连方式;(3)自由基聚合的自动加速;(4)引发转移和引发转移终止剂;(5)氢转移聚合和基因转移聚合。     

表面接枝分子印迹聚合物微球的合成及评价

将聚苯乙烯-二乙烯苯微球表面功能基化, 引入引发转移终止剂(initiator-transfer-terminator agent, iniferter), 以活性自由基聚合方式研究了球形树脂表面合成印迹聚合物的方法. 在紫外光引发下, 以左旋麻黄碱为印迹分子, 甲基丙烯酸为功能单体, 在接枝Iniferter后的微球表面进行分子印迹聚合物接枝实验, 并使用不同的反应条件, 探讨了表面接枝印迹层微球制备条件对于识别能力的影响. 平衡吸附的结果表明, 表面接枝聚苯乙烯-二乙烯苯微球对于印迹分子具有亲和能力及选择性, 其识别能力来自于印迹得到的识别位点.     

Polymerization of vinyl monomers using a novel trifunctional iniferter

A novel trifunctional iniferter with photoinduced and thermal chemical dissociation functional groups in one molecule, diethyl 2,3‐dicyano‐2,3‐di(p‐N,N‐diethyldithiocarbamylmethyl)phenylsuccinate (DDDCS), was successfully synthesized. The bulk polymerizations of styrene and methyl methacrylate initiated by DDDCS under UV‐light irradiation and heating, respectively, were studied. The polymerizations proceeded via a living polymerization process in both cases; that is, the conversion and molecular weight of the resulting polymer increased linearly with increased reaction time. The resulting polymers, containing α‐ and ω‐N,N‐diethyldithiocarbamyl end groups, served as macroiniferters for further block copolymerization. Electron paramagnetic resonance studies showed that DDDCS initiated as a photoiniferter under UV‐light irradiation by reversible C S‐bond dissociation and as a thermal iniferter under heating by reversible hexasubstituted C C‐bond dissociation. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2115–2120, 2000     

含有热引发转移终止剂的引发体系在反向原子转移自由基聚合中的应用

原子转移自由基聚合 (ATRP)是实现活性聚合的一种颇为有效的途径 ,可以实现多种单体的活性自由基聚合 .反向原子转移自由基聚合 (ReverseATRP)的概念始提出于 1995年 ,是对传统ATRP的改进和拓展 .近年来关于此体系的引发剂的拓展、过渡金属及单体的适用性都得到了很大发展 .本文简要综述了我们研究组在反向原子转移自由基聚合方面的研究进展     

镍体系(NiCl_2/PPh_3)催化的反向原子转移自由基聚合

以 2 ,3 二氰基 2 ,3 二苯基丁二酸二乙酯 (DCDPS) NiCl2 PPh3 为引发体系 ,首次利用Ni2 + 和Ni+ 之间的变价关系 ,研究了乙烯基单体的反向ATRP .结果表明 ,苯乙烯 (St)的聚合具有活性自由基聚合的特征 ,所得PSt的分子量随转化率的增加而增加 ,并且制得的PSt可以作为大分子引发剂进行扩链反应 .但该引发体系引发甲基丙烯酸甲酯 (MMA)聚合时没有活性自由基聚合特征 ,PMMA的分子量与转化率基本无关 ,但分子量分布窄Mw Mn=1 19     

A copper‐based reverse atom‐transfer radical polymerization process for the living radical polymerization of polyacrylonitrile

The reverse atom‐transfer radical polymerization (RATRP) technique using CuCl₂/2,2′‐bipyridine (bipy) complex as a catalyst was applied to the living radical polymerization of acrylonitrile (AN). A hexasubstituted ethane thermal iniferter, diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS), was firstly used as the initiator in this copper‐based RATRP initiation system. A CuCl₂ to bipy ratio of 0.5 not only gives the best control of molecular weight and its distribution, but also provides rather rapid reaction rate. The rate of polymerization increases with increasing the polymerization temperature, and the apparent activation energy was calculated to be 57.4 kJ mol^?1. Because the polymers obtained were end‐functionalized by chlorine atoms, they were used as macroinitiators to proceed the chain extension polymerization in the presence of CuCl/bipy catalyst system via a conventional ATRP process. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 226–231, 2006     

“Living” radical polymerization of methyl methacrylate with diethyl 2,3-dicyano-2,3-diphenylsuccinate as a thermal iniferter

The bulk polymerization of methyl methacrylate (MMA) initiated with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS) was studied. This polymerization showed some “living” characteristics; that is, both the yield and the molecular weight of the resulting polymers increased with reaction time, and the resultant polymer can be extended by adding MMA. The molecular weight distribution of PMMA obtained at high conversion is fairly narrow (M_w/M_n = 1.24≈1.34). It was confirmed that DCDPS can serve as a thermal iniferter for MMA polymerization by a “living” radical mechanism. Furthermore, the PMMA obtained can act as a macroinitiator for radical polymerization of styrene (St) to give a block copolymer. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4610–4615, 1999     

Reverse atom transfer radical polymerization of vinyl monomers with Fe[SC(S)NEt2]3 alone as the catalyst

The living radical polymerization of methyl methacrylate and styrene was successfully carried out with diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS)/ferric tri(diethyldithiocarbamate) as a novel reverse atom transfer radical polymerization initiation system in which DCDPS was a hexa‐substituted ethane‐type thermal iniferter, DC was a diethyldithiocarbamate group, and no additional ligands such as nitrogen‐ or phosphine‐based compounds were required. The bulk polymerization of methyl methacrylate was carried out at 95 °C, and that of styrene was carried out at 120 °C. Poly(methyl methacrylate) and polystyrene (PSt) with high molecular weights and quite narrow molecular weight distributions (as low as 1.09 for PSt) were obtained. ¹H NMR spectroscopy revealed the presence of an α‐(carbethoxycyanophenyl)methyl group from the initiator and an ω‐DC group from the catalyst in the obtained polymers. Various chain‐extension reactions under UV light or thermal treatments were successfully conducted to prove the presence and efficient reinitiating of the ω‐DC group. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3464–3473, 2001     

Living/controlled radical polymerization of styrene with a new initiating system: DCDPS/FeCl3/PPh3

The living/controlled radical polymerization of styrene was investigated with a new initiating system, DCDPS/FeCl₃/PPh₃, in which diethyl 2,3‐dicyano‐2,3‐diphenylsuccinate (DCDPS) was a hexa‐substituted ethane thermal iniferter. The polymerization mechanism belonged to a reverse atom transfer radical polymerization (ATRP) process. The polymerization was controlled closely in bulk (at 100 °C) or in solution (at 110 °C) with a high molecular weight and quite narrow polydispersity (M_w/M_n = 1.18 ∼ 1.28). End‐group analysis results by ¹H NMR spectroscopy showed that the polymer was ω‐functionalized by a chlorine atom, which also was confirmed by the result of a chain‐extension reaction in the presence of a FeCl₂/PPh₃ or CuCl/bipy (2,2′‐bipyridine) catalyst via a conventional ATRP process. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 101–107, 2000     

Iniferter concept and living radical polymerization

Iniferters are initiators that induce radical polymerization that proceeds via initiation, propagation, primary radical termination, and transfer to initiator. Because bimolecular termination and other transfer reactions are negligible, these polymerizations are performed by the insertion of the monomer molecules into the iniferter bond, leading to polymers with two iniferter fragments at the chain ends. The use of well‐designed iniferters would give polymers or oligomers bearing controlled end groups. If the end groups of the polymers obtained by a suitable iniferter serve further as a polymeric iniferter, these polymerizations proceed by a living radical polymerization mechanism in a homogeneous system. In these cases, the iniferters (C S bond) are considered a dormant species of the initiating and propagating radicals. In this article, I describe the history, ideas, and some characteristics of iniferters and living radical polymerization with some iniferters that contain dithiocarbamate groups as photoiniferters and several compounds as thermal iniferters. From the viewpoint of controlled polymer synthesis, iniferters can be classified into several types: thermal or photoiniferters; monomeric, polymeric, or gel iniferters; monofunctional, difunctional, trifunctional, or polyfunctional iniferters; monomer or macromonomer iniferters; and so forth. These lead to the synthesis of various monofunctional, telechelic, block, graft, star, and crosslinked polymers. The relations between this work and other recent studies are discussed. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2121–2136, 2000