Propagation of a spherical wave in nonlinearly compressible and elastoplastic materials

The problem of spherical wave propagation in soil under the action of an intense uniformly decreasing load ₀(t) applied to the boundary of a cavity with radius r₀ is considered. Soil with a high stress level is modeled either by ideally nonlinearly compressible or elastoplastic material, taking account of linear irreversible unloading for the material. In contrast to [1–7], in order to describe material movement use is made of strain theory [8] with determining functions = (), _i=_i(_i), where , _i, , _i are the first and second invariants of strain and stress tensors. During material loading these functions are presented in the form of polynomials ()=(_i+₂¦¦), _ii)=(_i-_2i)_i, in which constant coefficients _i, _i=1, 2) are determined by experiment, taking account of the triaxial stressed state of soil. Solution of the problem is constructed by an analytically reversible method, with prescribed shape for the shock-wave (SW) surface in the form of a second-degree polynomial relating to time t and a numerical method of characteristics for a prescribed arbitrarily decreasing load _i(t). On the basis of the analytical equations obtained, calculations are carried out for material parameters (including loading profile) in a computer and stresses and mass velocity of plastic and elastoplastic materials are compared.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 4, pp. 95–100, July–August, 1986.The authors express their sincere thanks to Kh. A. Rakhmatulin for discussing the results of this work.     

Stress analysis of the cylinder subjected to arbitrarily distributed axisymmetrical loads

Summary Stress analysis has been carried out for a finite cylinder subjected to arbitrarily distributed axisymmetrical surface loads. Direct stress _x in the axial direction is assumed to be of the form _x = ₀+r ₁ +r ₂ where ₀ to ₂ are functions of x. Using the equations of equilibrium and compatibility the other direct stresses and the shearing stress are expressed by ₁ and ₂. Fundamental equations governing ₁ and ₂ are introduced using the variational principle of complementary energy. From the results of the present analysis it is evident that the boundary conditions can be satisfied completely even for the case where the external forces are specified in complicated form, and that more accurate solutions can easily be obtained by introducing additional terms in _x.

---

Spannungsanalyse für den Zylinder unter axialsymmetrischer Last in beliebiger Verteilung

Übersicht Für einen endlichen Zylinder unter axialsymmetrischer Oberflächenlast in beliebiger Verteilung werden die Spannungen ermittelt. Die Normalspannung in Axialrichtung wird in der Form _x = ₀+r ₁ +r ₂ angesetzt mit ₀, ₁, ₂ als Funktionen von x. Mit Hilfe der Gleichgewichtsund Verträglichkeitsbedingungen werden die anderen Normalspannungen und die Schubspannung durch ₁ und ₂ ausgedrückt. Über das Variationsprinzip für die Komplementärenergie werden die grundlegenden Gleichungen für ₁ und ₂ eingeführt. Die Ergebnisse zeigen, daß die Randbedingungen selbst für komplizierte Belastungsarten vollständig erfüllbar sind und mit zusätzlichen Termen in _x mühelos noch genauere Lösungen bestimmt werden können.

     

Rectilinear dislocation in an anisotropic plate

A solution has been found to the problem of calculating the stress and displacement fields caused by a rectilinear dislocation in an anisotropic elastic plate. Special cases of anisotropy have been found with solutions represented by elementary functions.Certain problems in describing crystal plastic deformation phenomena make it vital to know the fields of the elastic stresses and displacements caused by an individual dislocation in a bounded crystal. It is interesting to study the effect of crystal boundaries on these fields with a simple model which approximates fairly closely to experimental conditions.The model selected is shown in Fig, 1. A dislocation with a Burgers vector (b₁, b₂, b₃) is situated in an infinite elastic anisotropic plate of thickness 2h. The dislocation line is parallel to the plate boundaries. The following restriction is introduced in relation to the plate's elastic properties: the medium has a plane of elastic symmetry perpendicular to the dislocation line. The selection of the coordinate system and position of the dislocation are shown in Fig. 1. The requirement is to find the stresses and displacements at an arbitrary point in the plate.One limited special form of this problem has been solved by Kroupa [1]. The limitations which he introduced are as follows: the medium is isotropic, the dislocation is at the precise center of the band and the Burgers vector has only one component b₂ differing from zero (the same coordinates were chosen in [1] as in Fig. 1).Thus Kroupa's results can be obtained from the results of the present work as a special case. Other special cases arising from this problem are those concerning the elastic stress and displacement fields caused by a dislocation in anisotropic semi-bounded [2] and bounded [3] media.It is immediately apparent that the problem is a plane one, in the sense that the fields to be found do not depend on coordinate z. Since the medium has a plane of elastic symmetry perpendicular to the dislocation line, it is clear from [4] that the system of stresses and strains in such a medium can be divided into two independent subsystems. The first of these is plane deformation with stress components _xx, _yy and _xy differing from zero and displacement vector components u_x and u_y, the second is antiplane deformation with stress components _xz and _yz differing from zero and the displacement vector component u_z.In the case under examination, the plane deformation is caused by the Burgers vector edge components b_x and b_y and the antiplane deformation by the screw component b_z. The solution is therefore divided into two stages, corresponding to edge and screw dislocations.In conclusion, I wish to thank A. M. Kosevich for his valuable advice and L. A. Pastur for his constant vigilance and assistance in the work.     

Asymptotic theory for calculating heat fluxes near the corner of a body

A method is presented for calculating the distribution of the thermal fluxes, friction stresses, and pressure near the corner point of a body contour in whose vicinity the outer supersonic flow passes through an expansion wave. The method is based on a study of the asymptotic solutions of the Navier-Stokes equations as the Reynolds number R approaches infinity for the flow region in which the longitudinal gradients of the flow functions are large, invalidating conventional boundary layer theory. This problem was examined in part in [1], in which the distribution of the friction and pressure in a region with length on the order of a few thicknesses of the approaching boundary layer was obtained in the first approximation. The leading term of the expansion for the thermal flux to the surface of the body vanishes for a value of the Prandtl number equal to unity and for other values of the Prandtl number does not match directly with its value in the undisturbed boundary layer.The thermal-flux distribution is obtained for values of the Prandtl number approaching unity. For this purpose it was necessary to consider a more general double passage to the limit as 1 and 0 for a finite value of the parameter B=[(–1)/] [–ln ^1/4/]^1/4 characterizing the ratio of the effects of thermal conduction, viscous dissipation, and convection. The solution obtained previously [1] corresponds to the particular case B and therefore for actual values of R=10⁴–10⁶, ~ 0.7 overestimates considerably the effect of the dissipative term on heat transfer, although even in first approximation it describes the pressure distribution well and the friction distribution satisfactorily. For smooth matching of the solutions with the corresponding flow functions in the undisturbed boundary layer it was necessary to introduce a flow region with free interaction for the expansion flow. Equations and boundary conditions which describe the flow as a whole are presented. Examples are given of numerical calculations and comparison with experiment.     

Analytical evaluation of stress-strain test data

An analytical model for deducing the actual stress-strain properties from laboratory test results is discussed. As an illustration, an elastic bilinear material is used for unconfined cylindrical compression test conditions, as simulated with a finite element analysis. The results obtained are applicable for assisting in evaluating measured strength and stiffness properties of some clay soils, concrete test cylinders, concrete cores, and rock cores.The quantitative results of this study can be used for interpreting measured stress-strain data for unconfined compression test conditions. The error in measured results is shown to be influenced by Poisson's ratio, length-to-diameter ratio of the specimen, end condition, and ratio of inelastic modulus to initial elastic modulus. Curves for adjusting the measured results to the theoretical results are presented.Nomenclature D specimen diameter - E _i initial elastic stiffness modulus - E _y elastic stiffness modulus beyond the yield stress, plastic or inelastic modulus - L specimen length - axial strain - _av average strain - _g gage length strain - _y yield strain - Poisson's ratio - compressive stress - _av average stress - _t theoretical compressive stress - _y yield stress - _ym measured stress at the yield strain     

Theoretical, experimental and computational mechanics of fracture in constrained interlayers

The constraint of a thin silver interlayer is used to create high triaxial stresses to evaluate the applicability of theoretical models for ductile fracture. Rice and Tracey's model for cavity expansion under high triaxial states of stress and Huanget al.'s model for cavity instability were considered. The experimentally determined _m / _y values suggest that further investigation of the Huanget al. theory is warranted. Microstructural analysis revealed that multiple cavities were initially present in the silver interlayers, and the number and size of the cavities increased as failure was approached. Finite element analysis and experimental results showed excellent agreement in a computational determination of cavity instability. Thus, it appears that ductile fracture in constrained thin interlayers can be explained with unstable cavity growth.     

Flow in porous media III: Deformable media

Stokes flow in a deformable medium is considered in terms of an isotropic, linearly elastic solid matrix. The analysis is restricted to steady forms of the momentum equations and small deformation of the solid phase. Darcy's law can be used to determine the motion of the fluid phase; however, the determination of the Darcy's law permeability tensor represents part of the closure problem in which the position of the fluid-solid interface must be determined.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A ^* interfacial area of the- interface contained within a unit cell, m² - A _e ^* area of entrances and exits for the-phase contained within a unit cell, m² - E Young's modulus for the-phase, N/m² - e i unit base vectors (i = 1, 2, 3) - g gravity vector, m²/s - H height of elastic, porous bed, m - k unit base vector (=e ₃) - characteristic length scale for the-phase, m - L characteristic length scale for volume-averaged quantities, m - n unit normal vector pointing from the-phase toward the-phase (n = -n ) - p pressure in the-phase, N/m² - P p – g·r, N/m² - r ₀ radius of the averaging volume, m - r position vector, m - t time, s - T total stress tensor in the-phase, N/m² - T ⁰ hydrostatic stress tensor for the-phase, N/m² - u displacement vector for the-phase, m - V averaging volume, m₃ - V volume of the-phase contained within the averaging volume, m³ - v velocity vector for the-phase, m/s Greek Letters V /V, volume fraction of the-phase - mass density of the-phase, kg/m³ - shear coefficient of viscosity for the-phase, Nt/m² - first Lamé coefficient for the-phase, N/m² - second Lamé coefficient for the-phase, N/m² - bulk coefficient of viscosity for the-phase, Nt/m² - T –T ⁰ , a deviatoric stress tensor for the-phase, N/m²     

Transport in ordered and disordered porous media V: Geometrical results for two-dimensional systems

In this paper we continue the geometrical studies of computer generated two-phase systems that were presented in Part IV. In order to reduce the computational time associated with the previous three-dimensional studies, the calculations presented in this work are restricted to two dimensions. This allows us to explore more thoroughly the influence of the size of the averaging volume and to learn something about the use of anon-representative region in the determination of averaged quantities.

Nomenclature

Roman Letters A interfacial area of the– interface associated with the local closure problem, m² - a _i i=1, 2, gaussian probability distribution used to locate the position of particles - l unit tensor - characteristic length for the-phase particles, m - ⁰ reference characteristic length for the-phase particles, m - characteristic length for the-phase, m - _i i=1,2,3 lattice vectors, m - m convolution product weighting function - m _V special convolution product weighting function associated with a unit cell - n _i i=1, 2 integers used to locate the position of particles - n unit normal vector pointing from the-phase toward the-phase - r _p position vector locating the centroid of a particle, m - r gaussian probability distribution used to determine the size of a particle, m - r ₀ characteristic length of an averaging region, m - V averaging volume, m³ - V volume of the-phase contained in the averaging volume,V, m³ - x position of the centroid of an averaging area, m - x ₀ reference position of the centroid of an averaging area, m - y position vector locating points in the-phase relative to the centroid, m Greek Letters V /V, volume average porosity - _{a i} standard deviation ofa _i - _r standard deviation ofr - intrinsic phase average of      

The extension of Beltrami's ellipsoid to anisotropic bodies

Summary The spectral decomposition of the compliance, stiffness, and failure tensors for transversely isotropic materials was studied and their characteristic values were calculated using the components of these fourth-rank tensors in a Cartesian frame defining the principal material directions. The spectrally decomposed compliance and stiffness or failure tensors for a transversely isotropic body (fiber-reinforced composite), and the eigenvalues derived from them define in a simple and efficient way the respective elastic eigenstates of the loading of the material. It has been shown that, for the general orthotropic or transversely isotropic body, these eigenstates consist of two double components, ₁ and ₂ which are shears (₂ being a simple shear and ₁, a superposition of simple and pure shears), and that they are associated with distortional components of energy. The remaining two eigenstates, with stress components ₃, and ₄, are the orthogonal supplements to the shear subspace of ₁ and ₂ and consist of an equilateral stress in the plane of isotropy, on which is superimposed a prescribed tension or compression along the symmetry axis of the material. The relationship between these superimposed loading modes is governed by another eigenquantity, the eigenangle .The spectral type of decomposition of the elastic stiffness or compliance tensors in elementary fourth-rank tensors thus serves as a means for the energy-orthogonal decomposition of the energy function. The advantage of this type of decomposition is that the elementary idempotent tensors to which the fourth-rank tensors are decomposed have the interesting property of defining energy-orthogonal stress states. That is, the stress-idempotent tensors are mutually orthogonal and at the same time collinear with their respective strain tensors, and therefore correspond to energy-orthogonal stress states, which are therefore independent of each other. Since the failure tensor is the limiting case for the respective _x, which are eigenstates of the compliance tensor S, this tensor also possesses the same remarkable property.An interesting geometric interpretation arises for the energy-orthogonal stress states if we consider the projections of _x in the principal₃D stress space. Then, the characteristic state ₂ vanishes, whereas stress states ₁, ₃ and ₄ are represented by three mutually orthogonal vectors, oriented as follows: The ₃ and ₄ lie on the principal diagonal plane (₃₁₂) with subtending angles equaling (–/2) and (-), respectively. On the positive principal ₃-axis, is the eigenangle of the orthotropic material, whereas the ₁-vector is normal to the (₃₁₂)-plane and lies on the deviatoric -plane. Vector ₂ is equal to zero.It was additionally conclusively proved that the four eigenvalues of the compliance, stiffness, and failure tensors for a transversely isotropic body, together with value of the eigenangle , constitute the five necessary and simplest parameters with which invariantly to describe either the elastic or the failure behavior of the body. The expressions for the _x-vector thus established represent an ellipsoid centered at the origin of the Cartesian frame, whose principal axes are the directions of the ₁-, ₃- and ₄-vectors. This ellipsoid is a generalization of the Beltrami ellipsoid for isotropic materials.Furthermore, in combination with extensive experimental evidence, this theory indicates that the eigenangle alone monoparametrically characterizes the degree of anisotropy for each transversely isotropic material. Thus, while the angle for isotropic materials is always equal to _i = 125.26° and constitutes a minimum, the angle || progressively increases within the interval 90–180° as the anisotropy of the material is increased. The anisotropy of the various materials, exemplified by their ratiosE _L/2G_L of the longitudinal elastic modulus to the double of the longitudinal shear modulus, increases rapidly tending asymptotically to very high values as the angle approaches its limits of 90 or 180°.     

EXACT SOLUTIONS OF NEAR CRACK LINE FIELDS FOR MODE I CRACK UNDER PLANE STRESS CONDITION IN AN ELASTIC－PERFECTLY PLASTIC SOLID

ＥＸＡＣＴＳＯＬＵＴＩＯＮＳＯＦＮＥＡＲＣＲＡＣＫＬＩＮＥＦＩＥＬＤＳＦＯＲＭＯＤＥＩＣＲＡＣＫＵＮＤＥＲＰＬＡＮＥＳＴＲＥＳＳＣＯＮＤＩＴＩＯＮＩＮＡＮＥＬＡＳＴＩＣ－ＰＥＲＦＥＣＴＬＹＰＬＡＳＴＩＣＳＯＬＩＤＥＸＡＣＴＳＯＬＵＴＩＯＮＳＯＦＮＥＡ...     

Viscous properties of soil

Dynamic problems connected with the wave propagation in soils not saturated with water and with wave interaction with obstacles and structural elements at the present time are solved on the basis of models in which plastic but not viscous soil properties are taken into account [1–5]. An analysis of experimental data and their comparison with the calculated results [4, 5] confirms that it is permissible to apply the model of an elasticplastic medium to soils in problems concerning the interaction of waves and structures. At the same time plane-wave damping in soils takes place more intensively than would follow from calculations carried out on the basis of models of an elastic-plastic medium. For example, if in a section of a poured sandy soil, taken as the initial section, the maximum stress in the wave is _m=ll kgf/cm² and its duration is 6=8 msec, then at a distance of 25 cm the calculations give _m=9.5 kgf/cm², while the experiment gives _m= 5 kgf/cm². If in the initial section _m= 20 kgf/cm² and =6 msec, then at a distance of 35 cm the calculation gives _m= l7 kgf/cm², while the experiment gives _m= 9 kgf/cm². In the calculations it was assumed that unloading takes place with a constant strain. This deviation of the calculated results from the experiment can be explained, in the first place, by the dependence of the () on the strain rate , which is not taken into account in the model of an elastic-plastic medium. The viscous properties cause additional energy losses and a more intensive damping of the waves. Experimentally the dependence of the () curves on the strain rate has been investigated for many soils [5–8]. The dynamic load on the test sample was produced by a body falling from a height or being accelerated by some method. Below we present test results of viscous soil properties when the test sample is compressed by an air shock wave. Compression curves and approximate numerical values of the coefficient of viscosity are obtained.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, Vol. 9, No. 4, pp. 68–71, July–August, 1968.The author thanks A. I. Shishikin for his participation in the experiments.     

Zur Variationsformulierung nichtlinearer Randwertprobleme

Übersicht Es werden verschiedene Bedingungen aufgestellt, die es erlauben, die durch die beiden (Systeme von) nichtlinearen DifferentialgleichungenA (u, ) = q, B (u, ) = und Randbedingungen zusammen mit den nichtlinearen algebraischen Relationenq = C(u, ), = D(u, ) beschriebene Aufgabe durch äquivalente Variationsprobleme zu ersetzen. Dabei zeigt sich ein enger Zusammenhang mit den in der Festkörpermechanik wohlbekannten Prinzipien der virtuellen Verschiebungen und der virtuellen Kräfte. Die auf systematischem Weg konstruierten Variationsfunktionale enthalten viele in der Physik bekannte Funktionale als Sonderfälle, insbesondere jene, die in der Elastomechanik nach Green, Castigliano, Hellinger, Reißner, Hu und Washizu benannt werden.

---

Summary In this paper there are established various conditions which allow a variational formulation of the problem described by the two (systems of) nonlinear differential equationsA(u, ) = q, B(u, ) = and boundary conditions together with the nonlinear algebraic relationsq = C(u, ), = D(u, ). Besides a close relationship is revealed to the principles of virtual displacements and virtual forces which are wellknown in solid mechanics. The systematically constructed variational functional contain many functionals in physics as special cases, mainly those of Green, Castigliano, Hellinger, Reißner, Hu and Washizu in elastomechanics.

     

On the closure problem for Darcy's law

In a previous derivation of Darcy's law, the closure problem was presented in terms of an integro-differential equation for a second-order tensor. In this paper, we show that the closure problem can be transformed to a set of Stokes-like equations and we compare solutions of these equations with experimental data. The computational advantages of the transformed closure problem are considerable.Roman Letters A interfacial area of the- interface contained within the macroscopic system, m² - A _e area of entrances and exits for the-phase contained within the macroscopic system, m² - A interfacial area of the- interface contained within the averaging volume, m² - A _e area of entrances and exits for the-phase contained within the averaging volume, m² - B second-order tensor used to respresent the velocity deviation - b vector used to represent the pressure deviation, m^–1 - C second-order tensor related to the permeability tensor, m^–2 - D second-order tensor used to represent the velocity deviation, m² - d vector used to represent the pressure deviation, m - g gravity vector, m/s² - I unit tensor - K C ^–1,–D, Darcy's law permeability tensor, m² - L characteristic length scale for volume averaged quantities, m - characteristic length scale for the-phase, m - l _i i=1, 2, 3, lattice vectors, m - n unit normal vector pointing from the-phase toward the-phase - n _e outwardly directed unit normal vector at the entrances and exits of the-phase - p pressure in the-phase, N/m ² - p intrinsic phase average pressure, N/m² - p –p , spatial deviation of the pressure in the-phase, N/m² - r position vector locating points in the-phase, m - r ₀ radius of the averaging volume, m - t time, s - v velocity vector in the-phase, m/s - v intrinsic phase average velocity in the-phase, m/s - v phase average or Darcy velocity in the \-phase, m/s - v –v , spatial deviation of the velocity in the-phase m/s - V averaging volume, m³ - V volume of the-phase contained in the averaging volume, m³ Greek Letters V /V volume fraction of the-phase - mass density of the-phase, kg/m³ - viscosity of the-phase, Nt/m²     

A generalized Norton-Hoff model and the Prandtl-Reuss law of plasticity

The aim of this article is to study the quasistatic evolution of a three-dimensional elastic-perfectly plastic solid which satisfies the Prandtl-Reuss law. The evolution of the field of stresses -which solves a time dependent variational inequality — and that of the field of displacements u, have been described in previous works [15], [26], [35], [36], [37] but it was not shown there that and u satisfy indeed the Prandtl-Reuss constitutive law. In this article we find and u in a class of functions which are sufficiently regular for the Prandtl-Reuss law to make sense and we prove that and u satisfy the constitutive law. This result is attained by considering the elastic-perfectly plastic model as the limit of a family of elastic-visco-plastic models like those of Norton and Hoff. The Norton-Hoff type models which we introduce depend on a viscosity parameter > 0; we study the perturbed models (i.e. > 0 fixed) and then we pass to the limit 0.Dedicated to James Serrin on the occasion of his 60^th Birthday     

Analytical formulation of the theoretical subsequent yield surfaces of metals with strain-hardening and Bauschinger effect in an ideal tension-torsion test

Summary The evolution of the yield locus of metals in the strain-hardening range is analytically studied in the - plane. The problem, of theoretical and technical interest, is completely solved by applying the theory of slip and by taking into account the Bauschinger effect.

---

Sommario Si studia analiticamente l'evoluzione della superficie di plasticizzazione dei metalli in fase di incrudimento nel piano - . Il problema, che riveste notevole interesse teorico ed applicativo, viene risolto in forma completa nell'ambito della teoria degli slip e prendendo opportunamente in conto l'effetto Bauschinger.

---

---

This work was done under the auspices of the Consiglio Nazionale delle Ricerche.     

An application of nonsymmetric Lax-Milgram lemma to nonassociated plasticity

Based on a general assumption for plastic potential and yield surface, some properties of the nonassociated plasticity are studied, and the existence and uniqueness of the distribution of incremental stress and displacement for work-hardening materials are proved by using nonsymmetric Lax-Milgram lemma, when the work-hardening parameter A>F/Q/–F/, Q/.     

Gas-dynamic heating in cavities under the influence of pressure pulsations at the entrance

An investigation has been made of the gas-dynamic heating of gas in nearly closed cavities (tubes, channels, etc.) under the influence of given pressure pulsations (with and without a discrete component) at the entrance. The results are given of measurements of the wall temperature of the cavities and also the power of the gas-dynamic heating as a function of the relative cavity length 10< ln/d_n < 300, the relative level of the pressure pulsations ₀/p < 0.5 at the entrance, and the magnitude of the static pressure in the range p = 2–10 kg/cm². It was established that with increasing p and especially ₀/p the power of the gas-dynamic heating increases strongly.Translated fron Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 177–179, November–December, 1983.     

Finite elastic straining

Summary Finite elastic straining is analysed with all quantities referred consistently to the deformed body taken as the function domain. The straining-displacement of a typical point is relative to a set of axes imbedded in the body at one arbitrary point and rotating in fixed space with that neighborhood if necessary in a particular problem. The resulting |plane stress' equations have precisely the same form as in the classical theory but relate to |true' quantities in the deformed body.The solution of a circular hole in a deformed sheet under simple tension is given and checks closely with experiment on rubber. Cauchy strains of order 65% and local rotation of order 30° are found to occur at the hole boundary.The solution of a deformed quadrantal cantilever is given. Cauchy strains of several hundred percent and local rotation of order 90° occur.Any boundary value problem already solved for the classical infinitesimal strains theory can be applied directly as a finite strains solution for the deformed body.Notation x, y, z, r, , z Cartesian and polar co-ordinates respectively - , Normal and shear true stresses respectively - , Normal and shear true strains respectively - r Position vector - Airy stress function - S Simple tensile stress applied to sheet - a Radius of circular hole in deformed sheet - a, b Inner and outer radii of quadrantal cantilever - u Straining-displacement vector - u, v Straining-displacement scalar components - E, True Young's modulus and Poisson's ratio respectively - c ₁, c ₂ Local unit vectors in principal normal strains directions - i, j Cartesian axes constant unit vectors - Stress dyadic or tensor - First stress invariant - I Idemfactor or spherical tensor - P Shear load per unit thickness applied to quadrantal cantilever - A, B, D, N, H, K, L Arbitrary constants of integration     

Critical phenomena and waves in gas-liquid systems

The results of the hydraulic studies of gas-liquid media, wave processes in two-phase media and critical phenomena are described. Some methodological foundations to describe these media and methods to obtain the basic similarity criteria for the hydraulics and gas-dynamics of bubble suspensions are discussed. A detailed consideration is given for the phase transition processes on interfaces and the interface stability. A relation has been revealed between the wave and critical phenomena in two-phase systems.Nomenclature a thermal diffusivity - Ar Archimedes number - B gas constant - C heat capacity - C _p heat capacity at constant pressure - C _v heat capacity at constant volume - c ₀ acoustic velocity in the mixture - c _l acoustic velocity in the liquid - C _f flow resistance coefficient - G mass rate of flow - g gravitational acceleration - L latent heat of evaporation - l initial perturbation width - M Mach number - Nu Nusselt number - P pressure - Pr Prandtl number - R bubble radius - (3P ₀/R ₀ ² _f )^–1 bubble resonance frequency square - T temperature - U medium motion velocity - W heavy phase velocity - W light phase velocity - We Weber number - heat release coefficient - dispersion coefficient - void fraction - adiabatic index - film thickness - dimensionless film thickness - kinematic viscosity coefficient - dynamical viscosity coefficient - dissipation coefficient in the mixture - dispersion parameter - _f liquid phase density - light phase density - heat conductivity - surface tension - frequency, ₀ ² =3P ₀/ _f R ₀ ²