Compatibility between polystyrene copolymers and polymers in solution via hydrogen bonding

It has been applied the concept of improving miscibility, by introducing and optimizing the extent of intermolecular hydrogen-bonding interactions between two polymers. We select a commodity polymer such as polystyrene, to study the compatibility in chloroform with poly(vinyl pyridine) and poly(vinyl pyrrolidone), both considered as proton acceptors. In order to enhance polymer-polymer miscibility, polystyrene is slightly modified by copolymerization with methacrylic acid, in the first case, and with vinyl-phenol comonomer, in the second one. In this way, two series of polystyrene-based copolymers are synthesized and characterized bearing ca. 8% (w/w) of -OH groups. The miscibility gaps through the binodal ternary phase diagrams, interpolymer interaction parameter from viscometry and the evaluation of the interassociation equilibrium constant, K, by FT-IR spectroscopy serve to analyze the effect of the spacing of interacting moieties along the polystyrene chain. Our results prove that polymer-polymer miscibility increases with an increase in the methacrylic-acid content in the copolymer chain; however, when the polar group is vinyl phenol, this continuous trend is disrupted.     

Comparative studies on exchange reactions of hexafluoroacetylacetonate in bis(hexafluoroacetylacetonato)(dimethyl sulfoxide)dioxouranium(VI) in nonaqueous solvent and supercritical CO(2)

Exchange reactions of hexafluoroacetylacetonate (hfacac) in UO2(hfacac)2DMSO (DMSO = dimethyl sulfoxide) in o-C6D4Cl2 and supercritical CO2 (sc-CO2) have been studied using the NMR line-broadening method to compare reactivity in a nonaqueous solvent with that in sc-CO2. It was found that the exchange rates of hfacac in both systems are dependent on the concentration of the enol isomer ([Henol]) of hexafluoroacetylacetone and become slow with an increase in the concentration of free DMSO ([DMSO]). The exchange reaction between free and coordinated DMSO in UO2(hfacac)2DMSO has been also examined in o-C6D4Cl2 and sc-CO2. As a result, the exchange rate of DMSO was found to depend on [DMSO]. From these results, the hfacac exchange reactions in UO2(hfacac)2DMSO in o-C6D4Cl2 and sc-CO2 were proposed to proceed through the mechanism that the ring-opening for one of two coordinated hfacac in UO2(hfacac)2DMSO is the rate-determining step, and the resulting vacant site is coordinated by the incoming Henol, followed by the proton transfer from Henol to hfacac and the ring closure of unidentate hfacac. The rate constants at 60 degrees C and the activation parameters (DeltaH and DeltaS) for the ring-opening path are 35.8 +/- 3.2 s(-1), 57.8 +/- 2.7 kJ.mol(-1), and -42.9 +/- 7.7 J.mol(-1).K(-1) for the o-C6D4Cl2 system, and 518 +/- 50 s(-1), 18.9 +/- 1.8 kJ.mol(-1), and -138 +/- 5 J.mol(-1).K(-1) for the sc-CO2 system, respectively. Differences in kinetic parameters between sc-CO2 and o-C6D4Cl2 systems were proposed to be attributed to the solute-solvent interactions such as Lewis acid-Lewis base interactions and hydrogen bondings between sc-CO2 and beta-diketones.     

Properties of poly(vinyl alcohol)-graft-polyacrylamide copolymers depending on the graft length. 3. Benzene solubilization by solutions of the copolymer

The peculiarities of poly(vinyl alcohol)-graft-polyacrylamide copolymers (PVA-g-PAA), which are characterized by the equal average number (N=9), but various molecular weight (or length) of graft chains, in comparison with individual PAA and PVA, were investigated in aqueous medium. Sharp rise in benzene solubilization in PVA-g-PAA solutions at M_PAA higher than 4.3·10⁵ has been established. It was shown that such effect is stipulated by the destruction of intramolecular polymer-polymer complex in the copolymer and increasing the benzene binding to separate PVA-g-PAA groups by means of hydrogen bonds. The changes in the PVA-g-PAA solubilizing ability as the function of temperature were also investigated. The obtained results are discussed from the point of view of conformational transitions of intramolecular polymer-polymer complexes (intraPPC), which exist in copolymers, in dependence on the length of graft chains.     

Conformational changes in poly(vinyl alcohol)-graft-polyacrylamide in aqueous solutions vs graft content

Conformational changes have been studied in intramolecular polymer-polymer complexes (intraPC) of graft copolymers of poly(acrylamide) and poly(vinyl alcohol) (PVA-g-PAA) with various numbers of grafts (4-42) per molecule as a function of temperature and copolymer concentration. It is shown that the magnitude of conformational change depends on the grafts content while the temperature range over which the conformation changes occur is essentially determined by copolymer concentration. The conformational changes are reversible on heating and cooling.     

Tailor-made polymers and copolymers from aziridines and 1,3-oxacyclanes

Telechelic poly(tert-butylaziridine)s (polyTBA) and poly(1,3,6-trioxocane)s (polyTOC) and macromonomers were synthesized mainly by living cationic polymerization. Both, molecular weight and end-functionality distributions of polyTOC oligomers and polymers were studied using a combination of HPLC under “critical conditions”, gradient HPLC and SEC with double detection following a preparative HPLC fractionation. Monofunctional and bifunctional polyTBA with various end-groups were synthesized by the end-capping method. Several modification reactions were examined for terminal transformation of polyTBA and polyTOC hydroxy-telechelics into mono- and bifunctional vinyl ether macromonomers. Various tailor-made polymers based on uniform size telechelics and macromonomers were prepared using: 1. polymer-polymer coupling to produce block copolymers; 2. polyaddition of amino-functionalized telechelics to bisacrylamides; 3. addition of amino-polyTBA to polydienes; 4. synthesis of graft copolymers with well-defined graft component and networks.     

Molecular architecture and physicochemical properties of some vinyl alcohol-vinyl acetate copolymers

Two series of vinyl alcohol-vinyl acetate copolymers were prepared by homogeneous and heterogeneous acetylation of the same precursor poly(vinyl alcohol). Their intramolecular monomer distributions were analyzed by IR spectrometry, calorimetry, and differential thermal analysis. The results show a more blocky distribution for the heterogeneously prepared copolymers. The properties of these (co)polymers in dilute aqueous solution were determined by means of viscometry. Whereas the copolymer-solvent interaction parameter of the homogeneously acetylated, random copolymers hardly varied with acetate content, a definite minimum was found for the blocky copolymers at about 7 mole% vinyl acetate. These findings were attributed to the incompatibility of dissimilar sequences, which sharply decreases with decreasing vinyl acetate sequence length. Up to about 17 mole% vinyl acetate content, the solvent quality for the copolymers is at least as good as for poly(vinyl alcohol). In addition, the dilute solution properties of the samples were established in water saturated with 1-butanol. For copolymers with up to about 17 mole% vinyl acetate, at 25°C this mixture is a better solvent than water. The highest increase in solvent quality was found for the homopolymer, whereas the increase diminished with acetate content, irrespective of the intramolecular vinyl acetate distribution. These findings are explained in terms of preferential adsorption of 1-butanol onto the (co)polymer backbone due to hydrophobic interactions and prevention of this process by the bulky acetate groups.     

FTIR studies of polar interactions in polymer blends

Specific interactions in binary blends of poly(vinyl chloride) (PVC) with ethylene–vinyl acetate copolymers (EVA) and ethylene-methyl acrylate copolymers (EMA) were investigated by observation of band shifts of the carbonyl absorption using ATR-FTIR spectroscopy at variable temperature. Blends of PVC with EVA and EMA could be prepared as heterogeneous, homogeneous or metastable homogeneous mixtures, depending on the copolymer composition. The miscible systems as well as the heterogeneous ones showed only very small or no band shifts. The metastable blends exhibited shifts of several wave numbers to lower values, which vanished at higher temperatures as the blends demixed. Strong interactions in the metastable blends could be related to good impact properties of the corresponding two-phase systems.     

(Vinyl amine)-(vinyl alcohol) copolymers Synthesis,characterization and potentiometric behaviour

Some copolymers of vinyl amine with vinyl alcohol have been synthesized by hydrolysis of copolymers of tert.-butyl vinyl carbamate with vinyl acetate. From reaction kinetics and counterion distribution, it can be concluded that the copolymers are random. The potentiometric titration behaviour indicates that the very marked dependence of the dissociation constant on the charge fraction, even at high ionic strength, for this polyelectrolyte system may result from a very specific solvation process i.e. a strong dependence on the charge state of the interactions between polyion with counterions and solvent molecules.     

Properties of poly(vinyl alcohol)-graft-polyacrylamide copolymers depending on the graft length. 2. Thermal properties in the bulk state

Thermal behavior of poly(vinyl alcohol)-graft-polyacrylamide copolymers (PVA-g-PAA), so-called intramolecular polymer-polymer complexes (intraPC), with variable M̄ _vPAA and constant average number N of grafts is considered in this report. Complete compatibility of PVA and PAA through hydrogen bonding is realized in the range of the graft lengths not exceeding some critical value. The content of adsorbed and trapped water in graft copolymers reflects some features of PVA-g-PAA_N structure depending on the graft lengths. The first thermal decomposition region in air for copolymers begins at higher temperatures with growing M̄ _vPAA, but the total destruction interval reduces. Formal kinetic decomposition parameters of the first decomposition stage appear to be the largest for the PVA-g-PAA with the largest quantity of H-bonds between the main and graft chains. Chemical transformations in graft copolymers, PVA and PAA during thermal decomposition are discussed.     

Synthesis of various stimuli‐responsive gradient copolymers by living cationic polymerization and their thermally or solvent induced association behavior

Stimuli‐responsive gradient copolymers, composed of various monomers, were synthesized by living cationic polymerization in the presence of base. The monomers included thermosensitive 2‐ethoxyethyl vinyl ether (EOVE) and 2‐methoxyethyl vinyl ether (MOVE), hydrophobic isobutyl vinyl ether (IBVE) and 2‐phenoxyethyl vinyl ether (PhOVE), crystalline octadecyl vinyl ether (ODVE), and hydrophilic 2‐hydroxyethyl vinyl ether (HOVE). The synthesis of gradient copolymers was conducted using a semibatch reaction method. Living cationic polymerization of the first monomer was initiated using a conventional syringe technique, followed by an immediate and continuous addition of a second monomer using a syringe pump at regulated feed rates. This simple method permitted precise control of the sequence distribution of gradient copolymers, even for a pair of monomers with very different relative monomer reactivities. The stimuli‐responsive gradient, block and random copolymers exhibited different self‐association behavior. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6444–6454, 2008     

Self-assembly of pODMA-b-ptBA-b-pODMA triblock copolymers in bulk and on surfaces. A quantitative SAXS/AFM comparison

The phase state of a series of poly(n-octadecyl methacrylate)-b-poly(tert-butyl acrylate)-b-poly(n-octadecyl methacrylate) (pODMA-b-ptBA-b-pODMA) triblock copolymers, synthesized through atom transfer radical polymerization, has been investigated in bulk and on surfaces using small-angle X-ray scattering and atomic force microscopy, respectively. The mean-field theory was employed to construct the bulk phase diagram. Excellent agreement was found between the bulk and surface morphologies as well as for the domain spacing (domain spacing scaled as d approximately equal to N(0.64)), suggesting that the strong polymer-polymer interactions in bulk are also the dominant interactions on surfaces.     

Novel temperature‐responsive water‐soluble copolymers based on 2‐hydroxyethylacrylate and vinyl butyl ether and their interactions with poly(carboxylic acids)

Novel water‐soluble amphiphilic copolymers have been synthesized by free radical copolymerization of 2‐hydroxyethylacrylate with vinyl butyl ether. In water these copolymers exhibit lower critical solution temperature, which depends on the content of hydrophobic vinyl butyl ether units. The interaction between these copolymers and poly(acrylic acid) or poly(methacrylic acid) in aqueous solutions results in formation of interpolymer complexes stabilized by hydrogen bonds and hydrophobic interactions. An increase in hydrophobicity of the copolymers leads to the enhancement of their complex formation ability with respect to poly(acrylic acid) and poly(methacrylic acid). Poly(methacrylic acid) forms stronger complexes with the copolymers when compared with poly(acrylic acid). The complexes exhibit dual sensitivity to pH‐ and temperature and this property may be easily adjusted regulating the strength of interaction. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 195–204, 2006     

Viscometric study of poly(vinyl chloride)/poly(vinyl acetate) blends in various solvents

The intermolecular interactions between poly(vinyl chloride) (PVC) and poly(vinyl acetate) (PVAc) in tetrahydrofuran (THF), methyl ethyl ketone (MEK) and N,N^′-dimethylformamide (DMF) were thoroughly investigated by the viscosity measurement. It has been found that the solvent selected has a great influence upon the polymer-polymer interactions in solution. If using PVAc and THF, or PVAc and DMF to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+THF) or (PVAc+DMF) is less than in corresponding pure solvent of THF or DMF. On the contrary, if using PVAc and MEK to form polymer solvent, the intrinsic viscosity of PVC in polymer solvent of (PVAc+MEK) is larger than in pure solvent of MEK. The influence of solvent upon the polymer-polymer interactions also comes from the interaction parameter term Δb, developed from modified Krigbaum and Wall theory. If PVC/PVAc blends with the weight ratio of 1/1 was dissolved in THF or DMF, Δb<0. On the contrary, if PVC/PVAc blends with the same weight ratio was dissolved in MEK, Δb>0. These experimental results show that the compatibility of PVC/PVAc blends is greatly associated with the solvent from which polymer mixtures were cast. The agreement of these results with differential scanning calorimetry measurements of PVC/PVAc blends casting from different solvents is good.     

Polymer assembly exploiting three independent interactions

Three independent polymer/polymer complexing mechanisms were used to assemble polymer trilayers onto anionic surfaces in water. Polymer-surface and polymer-polymer attraction were driven by (1) electrostatic attraction between positive polymers bearing benzyl trimethyl ammonium chloride (BTM) groups and negative surfaces; (2) polyethylene glycol (PEG) binding to phenolic (Ph) groups; and (3) phenylboronate (PBA) binding to polyols. The approach was to prepare copolymers with the following pairs of compatible interacting groups: BTM/Ph, BTM/PEG, PBA/PEG, and PBA/Ph. The supporting surfaces were either silicon or anionic self-assembled on gold. The ultimate goal is to employ independent polymer/polymer interactions to prepare complex assemblies in a few steps.     

Matrix polycondensation through hydrogen bonding interaction

Polycondensation of diesters having hydroxyl or pyridine groups was carried out with hexamethylenediamine (HMD) in the presence of (vinyl alcohol/vinyl acetate) copolymers as a matrix polymer. Apparent rates of the polycondensation of dimethyl tartrate (DMT) with HMD increased with increasing contents of PVA units in the copolymers and a strong entanglement between growing polyamide chains and PVA copolymers took place through the adsorption of HMD and DMT on the matrix copolymers. 2,6-Dimethyl pyridine dicarboxylate (2,6-DMP) reacted with HMD in the presence of the PVA copolymers or polysaccharide, while the rate enhancement effect of the matrix polymers was not significantly observed, as in the case of DMT. The effect of the matrix polymers on the polycondensation was discussed in terms of hydrogen bonding interactions.     

Dielectric,ultrasonic and x-ray diffraction studies on poly(vinyl chloride)-chlororubber-20 blends

Poly(vinyl chloride)-chlororubber-20 blends have been studied for compatibility by dielectric, ultrasonic and X-ray diffraction techniques. It has been found by both ultrasonic and dielectric techniques that poly(vinyl chloride) forms compatible blends with chlororubber-20 over a wide range of composition. X-ray diffraction studies indicate polymer-polymer interaction and reduction in the crystallinity of poly(vinyl chloride) by the incorporation of chlororubber-20. These results agree with earlier observations and have been explained in terms of the molecular and morphological behaviour of the blends.     

Lattice Monte Carlo investigations on copolymer systems, 3. Alternating and random copolymers

Alternating and random copolymers in dilute solution are investigated by means of Monte Carlo simulations on a cubic lattice. Each molecule consists of an equal number of A and B segments, either randomly distributed along the chain or forming an alternating sequence. The energy parameters chosen represent selective solvent conditions (the solvent is a good one for monomers of type A and a θ-solvent for B; between A and B repulsive interactions are operative). Comparison with di- and triblock copolymers of equal overall composition reveals that the behaviour of random or alternating copolymers (subject to the same selective solvent) is quite different. Their properties rather resemble those of homopolymers in a solvent of intermediate quality. The absolute chain dimensions (e.g. the mean square radius of gyration, 〈s²〉, and the mean square end-to-end distance, 〈h²〉) of random and alternating copolymers as well as their scaling exponents are significantly larger than those of block copolymers. The ratio between 〈h²〉 and 〈s²〉 as well as the shape of the polymer (expressed by the asphericity δ) are similar to those of athermal polymers indicating that there is no pronounced selectivity of the solvent. In contrast to block copolymers, these parameters exhibit no significant chain-length dependence. The number of the various types of polymer-polymer contacts (A-A, B-B and A-B) is almost independent of the type of contact at least for the solvent conditions investigated. This is in contrast to block copolymers where A-B contacts are widely suppressed and where the number of B-B contacts is approximately twice as high as that of A-A contacts.     

Preparation of a mercaptopropyl bonded silica intermediate in supercritical carbon dioxide: synthesis, characterisation and chromatography of a quinine based chiral stationary phase

This research examines the preparation of a mercaptopropyl bonded silica intermediate in supercritical carbon dioxide (sc-CO(2)) and the subsequent conversion in sc-CO(2) to a quinine derived chiral stationary phase (CSP). The effects of reaction temperature, pressure and time on the surface coverage of the silica intermediate were investigated when porous silica particles (Exsil-Avanti, 3microm) were reacted with 3-trimethoxymercaptopropylsilane in sc-CO(2). We present results which demonstrate that a stable mercaptopropyl bonded silica intermediate can be successfully prepared under supercritical conditions of 40 degrees C, 483bar, in a substantially reduced reaction time of 1h with superior surface coverages compared to organic solvent based methods. The further utility of this supercritical fluid technology was demonstrated by the free radical addition of a quinine derived chiral selector onto a mercaptopropyl bonded silica intermediate in sc-CO(2). This supercritical fluid generated chiral stationary phase (CSP) was utilised for the direct LC enantioseparation of a series of 3,5-dinitrobenzoyl (DNB) amino acids. Bonded silica samples were characterised using elemental analysis, diffuse reflectance infrared fourier transform (DRIFT) spectroscopy, solid state (13)C and (29)Si CP-MAS NMR spectroscopy, and thermogravimetric analysis (TGA). This supercritical fluid functionalisation approach offers an efficient and cleaner alternative to existing organic solvent based approaches for the preparation of bonded silica phases.     

Vinyl chloride polymers and their use in polymer blends

A short introduction to polymer-polymer miscibility and to the prediction of the miscibility of polymers is given. The four main types of polymer-modified poly(vinyl chloride) (plastification, impact modification, processing aids and heat deflection temperature modification) are explained by examples. The thermal stability of poly(vinyl chloride) in such blends is discussed; the effectivity of tin-stabilizers may be higher in such blends than in pure poly(vinyl chloride).     

Changes in thermodynamic interactions at highly immiscible polymer/polymer interfaces due to deuterium labeling

Deuterium labeling has been shown previously to affect thermodynamic interactions at polymer surfaces, polymer/polymer heterogeneous interfaces, and in bulk (away from a surface or interface). However, the changes in polymer-polymer interactions due to deuterium labeling have not been thoroughly investigated for highly immiscible systems. It is shown here that deuterium labeling can influence polymer-polymer interactions at heterogeneous interfaces with highly immiscible systems, namely, polystyrene/poly(2-vinylpyridine) (PS/P2VP), polystyrene/poly(4-vinylpyridine) (PS/P4VP), and polystyrene/poly(methyl methacrylate) (PS/PMMA). Using secondary ion mass spectrometry, segregation of deuterium labeled polystyrene (dPS) in a dPS + unlabeled PS (dPS:hPS) blend layer was observed at the dPS:hPS/hP2VP, dPS:hPS/hP4VP, and dPS:hPS/hPMMA heterogeneous interfaces. However, a reference system involving PS on a PS brush shows no segregation of dPS to the interface.