Synthesis and Catalytic Activity of Ferrocenyl Phosphinosulfoxide Ligand with Planar and Central Chirality

通过二茂铁侧链上具有手性中心的杂原子的邻位导向作用合成了具有平面手性和中心手性的二茂铁亚砜膦配体(3),其结构经1H NMR,13C NMR,IR,MS和元素分析表征.将络合物Pd-3用于催化1,3-二苯基-2-丙烯基乙酸酯与丙二酸二甲酯/氢化钠的模板反应,收率92％,20％ee.     

具有平面手性和中心手性的二茂铁基亚砜膦配体的合成及其催化活性

通过二茂铁侧链上具有手性中心的杂原子的邻位导向作用合成了具有平面手性和中心手性的二茂铁亚砜膦配体(3),其结构经1H NMR,13C NMR,IR,MS和元素分析表征。将络合物Pd-3用于催化1,3-二苯基-2-丙烯基乙酸酯与丙二酸二甲酯/氢化钠的模板反应,收率92%,20%ee。     

新型8-羟基喹啉铁配合物的合成及其对半胱氨酸和高半胱氨酸的识别性能

利用取代反应的原理,设计并合成了一种新型的8-羟基喹啉配合物[FeQ<,3>(HQ=8-羟基-7-(4-甲苯二氮烯基)喹啉-5-磺酸],其结构经<'1>H NMR,<'13>C NMR和元素分析表征.利用UV-Vis和溶液颜色的变化,实现了FeQ<,3>对半胱氨酸和高半胱氨酸的选择性裸眼识别.     

1-(1-甲氧基-1-二茂铁基-3-芳基-丙烷-2-基)-1H-1,2,4-三唑类衍生物的合成及生物活性研究

通过在三唑类活性结构中引入较大空间位阻的二茂铁基设计合成了11个新颖的含二茂铁取代的1H-1,2,4-三唑类化合物, 其结构经元素分析, ¹H NMR谱和单晶X-ray衍射分析得到确证. 初步的生物活性测试表明, 部分化合物具有明显的植物生长调节活性.     

两个α-氨基酸类二肽肽酶Ⅳ抑制剂的合成

以2,4,5.三氟苯甲酸为原料,经还原、溴代、烷基化、脱羧、脱乙酰基保护、上Boc-保护、酯水解、偶联、脱Boc-保护和成盐十步反应,合成了两个α-氨基酸类二肽肽酶Ⅳ抑制剂,α-氨基酸类衍生物,总收率23%,其结构经<'1>H NMR,<'13>C NMR和MS表征.     

二茂铁四唑和二茂铁甲醛缩3-取代丙二醇衍生物的合成

以甲酰基二茂铁6为原料, 通过与NH₄OH•HCl的缩合反应得到二茂铁肟7, 再经脱水剂脱水得到二茂铁腈8, 最后在(n-C₄H₉)₃SnCl的作用下与NaN₃反应生成新化合物二茂铁四唑(9). 以甲酰基二茂铁为原料, 在对甲苯磺酸(PTSA)的催化作用下与原甲酸三甲酯反应生成二甲基二茂铁缩醛(10), 然后与(R)-(－)-3-氯-1,2-丙二醇反应得到新的二茂铁缩醛衍生物12, 12再与NaN₃发生取代反应得到新的二茂铁缩醛衍生物13. 而新的二茂铁缩醛衍生物15的合成则是先由(R)-(－)-3-氯-1,2-丙二醇与CH₃OH在NaOH的作用下生成(R)-(－)-1-甲氧基-2,3-丙二醇(14), 再由14与二甲基二茂铁缩醛(10)反应得到的. 所合成的新化合物都用MS, ¹H NMR和IR谱确证了它们的结构.     

1,2-二乙酰氧甲基碳硼烷的合成

以6,9-二乙腈十硼烷和1,4-二乙酰氧基-2-丁炔为原料,合成了高纯度的1,2-二乙酰氧甲基碳硼烷,产率81.2%,纯度96.2%,其结构经UV-Vis,<'1>H NMR,<'11>B N-MR,IR和元素分析表征.     

微波法合成烯基膦酸酯类化合物

以β-硝基芳基乙烯和亚磷酸三乙酯为原料,二氯甲烷为溶剂,利用微波法合成了一系列烯基膦酸酯类化合物,其结构经<'1>H NMR,<'13>C NMR和HR-MS确证.     

二茂铁功能化的水溶性金纳米粒子的合成与表征

以聚乙二醇(PEG)为原料,经4步反应合成了一种端基为二茂铁(FcH)的PEG硫醇配体(Fc-PEG-SH).采用两相法制备了油胺(OAm)保护的金纳米粒子(OAm/nanoAu).采用配体交换法合成了二茂铁功能化的水溶性金纳米粒子(Fc-PEG/nanoAu),其结构和性能经UV-Vis,<'1>H NMR,IR,T...     

新型1,1-双二茂铁基丁烷衍生物的合成

1,1-双二茂铁基丁烷和乙酸酐经Friedel-Crafts酰基化反应得6-乙酰基-1,1-双二茂铁基丁烷(2);2经LiAlH4还原得6-α-羟乙基-1,1-双二茂铁基丁烷(3);3经消除反应合成了6-乙烯基-1,1-双二茂铁基丁烷(4)。2~4为新化合物,其结构经1H NMR,IR,MS和元素分析表征。     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

K3SbSe3, Rb3SbSe3 und Cs3SbSe3 – Synthese und Kristallstruktur

K₃SbSe₃, Rb₃SbSe₃, and Cs₃SbSe₃ – Synthesis and Crystal Structure The compounds K₃SbSe₃, Rb₃SbSe₃ and Cs₃SbSe₃ were synthesized by heating mixtures of Sb₂O₃ and an alkalicarbonate in a stream of hydrogen saturated by selenium in a temperature range between 750 °C and 800 °C. The compounds crystallize isostructural with Na₃AsS₃. A comparison of atomic distances and bond angles with those of the isostructural arsenic and bismuth compounds shows the effect of lone pairs.     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.     

Synthesis of some derivatives of 3-amino-3-desoxyerythrose and 3-amino-3-desoxy-D-3-erythrose

The synthesis of derivatives of 3-amino-3-deoxy-L-erythrose by LAH or LAD reduction of the oxime of 1,2-O-isopropylidene α-L -glycero-tetros-3-ulofuranose is described.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.     

Die Akzeptoreigenschaften von AsCl3, AsBr3, asJ3, SbCl3, SbBr3 und SbJ3

Zusammenfassung Es wurden die Enthalpien der Reaktionen von AsCl₃, AsBr₃, AsJ₃, SbCl₃, SbBr₃ und SbJ₃ mit Tributylphosphat, N,N-Dimethylacetamid und Hexamethylphosphorsäuretriamid bestimmt. Das Verhalten der Addukte bei Gegenwart eines Überschusses der Donoren wird beschrieben.

---

Acceptor properties of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃, and SbI₃

The enthalpies of the reactions of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃ and SbI₃ with tributylphosphate, N,N-dimethylacetamide and hexamethylphosphoric acid triamide were measured. The behavior of the adducts in the presence of excess donor molecules is described.

---

---

Mit 5 Abbildungen