Spectroelectrochemical studies of bilayers of phospholipids in gel and liquid state on Au(111) electrode surface

Differential capacity, chronocoulometry and Polarization Modulation Fourier Transform Infrared Reflection Absorption Spectroscopy (PM FTIRRAS) were employed to investigate spreading of small unilamellar vesicles (SUVs) of DOPC and DMPC onto a Au(111) electrode surface. The electrochemical experiments demonstrated that vesicles fuse onto the electrode surface and at E>-0.5V (SSCE) or at charge densities -10-0.5 V (SSCE), the tilt angle increases to approximately 42 degrees. The increase of the tilt angle is discussed in terms of a change in the packing of the polar head of the phospholipids molecules in the bilayer adsorbed at the electrode surface.     

Electrochemical and PM-IRRAS studies of the effect of cholesterol on the properties of the headgroup region of a DMPC bilayer supported at a Au(111) electrode

Polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was employed to investigate the interaction of cholesterol with the headgroups of dimyristoylphosphatidycholine (DMPC) molecules under a static electric field. DMPC/cholesterol (7:3 molar ratio) mixtures form a bilayer on a Au(111) electrode surface by fusion and spreading of small unilamellar vesicles. PM-IRRAS experiments provided detailed information concerning the conformation and hydration of headgroups of DMPC bilayers in the presence and absence of 30% cholesterol. The presence of 30% cholesterol increases the space between the headgroups of DMPC molecules and hence increases the hydration of the DMPC/cholesterol mixed bilayer. The conformational state of the headgroups of DMPC molecules in the mixed bilayer is also significantly changed. The phosphate group is closer to the surface compared with the pure DMPC bilayer. The conformation of the -O-C-C-N moiety changes from gauche to trans in the presence of cholesterol.     

Polarization modulation infrared reflection absorption spectroscopy investigations of thin silica films deposited on gold. 2. Structural analysis of a 1,2-dimyristoyl-sn-glycero-3-phosphocholine bilayer

In this paper we report on the structural analysis of bilayers of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) using polarization modulation infrared reflection absorption spectroscopy (PM IRRAS). The lipid bilayers were formed on SiO2|Au and Au surfaces using the Langmuir-Blodgett and Langmuir-Schaeffer techniques. As we showed in part 1 (Zawisza, I.; Wittstock, G.; Boukherroub, R.; Szunertis, S. Langmuir 2007, 23, 9303-9309), SiO2 layers of 7 nm thickness, synthesized by plasma-enhanced chemical vapor deposition on 200 nm thick gold covered glass slides, allow PM IRRAS investigations. Only minor changes in the order and structure of the lipid bilayer are observed when deposited on SiO2|Au and Au surfaces. The choline moiety in the leaflet directed toward the SiO2 surface exists in trans conformation and shows a tilt of 28 degrees with the surface normal of the CN bond. On the silica surface in the second leaflet directed toward air and in two layers deposited on the Au surface, trans and gauche isomers of the choline moiety are present and the tilt of the CN bond increases to 55 degrees with respect to the surface normal. The order and molecular orientation in the DMPC bilayers on SiO2 and Au surfaces are not affected by time. The analysis of the phosphate stretching mode on the Au surface shows slight dehydration of this group and reorientation of the phosphate moiety.     

Application of thin titanium/titanium oxide layers deposited on gold for infrared reflection absorption spectroscopy: structural studies of lipid bilayers

Ultrathin titanium layers when deposited on the surface of gold can be successfully applied for infrared reflection absorption spectroscopy (IRRAS) investigations. It was shown that the reflectivity, the phase shift, and the mean square electric field of the p- and s-polarized IR radiation in up to 20 nm thick titanium layers covered with a 3-4 nm thick layer of native oxide are comparable to those of the air/gold interface. The surface selection rule is fulfilled. Thus, qualitative and quantitative analysis of 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayers transferred in liquid expanded (LE) and liquid condensed (LC) states can be performed. Differences are found in the hydration state and molecular arrangement of the two investigated bilayers. In the DMPC bilayer in the LE state, the C-N bond in the positively charged choline moiety is inclined by approximately 70 degrees toward the surface of the negatively charged titanium substrate. In the phosphate moiety, the in-plane vector of the O-P-O group makes a small angle of approximately 15 degrees to the surface normal. This open structure of the lipid molecule corresponds to the B crystal structure of the DMPC molecule and provides space for strong hydration of the polar headgroup. In the DMPC bilayer in the LC state, the intermolecular distances are reduced; the C-N bond of the choline group makes a smaller angle to the surface normal, and the in-plane vector of the O-P-O group in the phosphate moiety displays a larger tilt. The degree of hydration is reduced. The arrangement of the polar headgroup region corresponds to the A crystal structure of the DMPC molecule.     

Layer-by-layer PMIRRAS characterization of DMPC bilayers deposited on a Au111 electrode surface

A combination of Langmuir-Blodgett and Langmuir-Schaefer techniques was employed to deposit 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) bilayers at a gold electrode surface. One leaflet consisted of hydrogen-substituted acyl chains, and the second leaflet was composed of molecules with deuterium-substituted acyl chains. This architecture allowed for layer-by-layer analysis of the structure of the bilayer. Photon polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) was used to determine the conformation and orientation of the acyl chains of DMPC molecules in the individual leaflets as a function of the potential applied to the gold electrode. The bilayer is adsorbed onto the metal surface when the field applied to the membrane does not exceed approximately 108 V/m. When adsorbed, the bottom leaflet is in contact with a hydrophobic metal surface, and the top leaflet is interacting with the aqueous solution. The asymmetry of the environment has an effect on the orientation of the DMPC molecules in each leaflet. The tilt angle of the acyl chains of the DMPC molecules in the bottom leaflet that is in contact with the gold is approximately 10 degrees smaller than that observed for the top leaflet that is exposed to the solution. These studies provide direct evidence that the structure of a phospholipid bilayer deposited at an electrode surface is affected by interaction with the metal.     

Polarization modulation infrared reflection-absorption spectroscopy studies of the influence of perfluorinated compounds on the properties of a model biological membrane

A combination of the Langmuir-Blodgett and Langmuir-Schaefer techniques has been used to build a 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayer at a Au(111) electrode surface with hydrogen-substituted acyl chains in the top leaflet (solution side) and deuterium-substituted acyl chains in the bottom leaflet (gold side). Polarization modulation infrared reflection-absorption spectroscopy was used to determine changes in the conformation and orientation of the acyl chains of DMPC caused by the incorporation of two selected perfluorinated compounds, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), into the top leaflet of the bilayer. The incorporation of perfluorinated compounds into the DMPC bilayer caused a broadening of the methylene peaks and a shift in the methylene band positions toward higher frequencies. In addition, the tilt angle of the acyl chains decreased in comparison to the tilt angle of a pure DMPC bilayer. The reported tilt angles were smaller upon insertion of PFOS ( approximately 24 degrees ) than in the presence of PFOA ( approximately 30 degrees ). Overall, the results show that the incorporation of the perfluorinated acids has an effect on the bilayer similar to that of cholesterol by increasing the membrane fluidity and thickness due to a decrease in the tilt angle of the acyl chains.     

Gauging the effect of impurities on lipid bilayer phase transition temperature

We report on the gel-to-fluid phase transition behavior of unilamellar vesicles formed with 1,2-dimyristoyl-sn-phosphatidylcholine (14:0 DMPC). We have interrogated the gel-to-fluid transition temperature of these bilayer structures using the chromophore perylene incorporated in their nonpolar region. We observe a discontinuous change in the reorientation time of perylene sequestered within the bilayer at the known melting transition temperature of 14:0 DMPC, 24 degrees C. The perylene reorientation data reveal a local viscosity of 14.5 +/- 2.5 cP in the gel phase, and 8.5 +/- 1.5 cP in the fluid phase. We have also incorporated small amounts of 1,2-dimyristoleoyl-sn-glycero-3-phosphocholine (14:1 DMPC) into these unilamellar vesicles and find that the melting transition temperature for these bilayers varies in a regular manner with the amount of 14:1 DMPC present. These data demonstrate that very little "contaminant" is required to cause a substantial change in the gel-to-fluid transition temperature, even though these contaminants do not alter the viscosity of the bilayer sensed by perylene, either above or below the melting transition.     

Study of frictional properties of a phospholipid bilayer in a liquid environment with lateral force microscopy as a function of NaCl concentration

Friction properties of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-supported planar bilayers deposited on mica were tested in a liquid environment by lateral force microscopy. The presence of these bilayers was detected by imaging and force measurements with atomic force microscopy. To test how the presence of NaCl affects the frictional properties of the phospholipid bilayers, four DMPC bilayers were prepared on mica in saline media ranging from 0 to 0.1 M NaCl. Changes in the lateral vs vertical force curves were recorded as a function of NaCl concentration and related to structural changes induced in the DMPC bilayer by electrolyte ions. Three friction regimes were observed as the vertical force exerted by the tip on the bilayer increased. To relate the friction response to the structure of the DMPC bilayer, topographic images were recorded at the same time as friction data. Ions in solution screened charges present in DMPC polar heads, leading to more compact bilayers. As a consequence, the vertical force at which the bilayer broke during friction experiments increased with NaCl concentration. In addition, the topographic images showed that low-NaCl-concentration bilayers recover more easily due to the low cohesion between phospholipid molecules.     

Influence of the electric field on a bio-mimetic film supported on a gold electrode

A model biological membrane was formed by fusion of mixed cholesterol and DMPC (dimyristoylphosphatidylcholine) phospholipid vesicles onto a gold-coated quartz support. The gold surface was charged and the influence of the charge at the solid support on the structure and integrity of the phospholipid bilayer was investigated using the specular reflection of neutrons and electrochemical measurements. When the surface charge density is close to zero, the lipid vesicles fuse directly on the surface to form a bilayer with a small number of defects and hence low water content. When the support's surface is negatively charged the film swells and incorporates water due to the field driven poration of the membrane. When the charge density is more negative then -8 microC cm(-2) the bilayer is detached from the metal surface. However, it remains in close proximity to the metal electrode, suspended on a thin cushion of water. The film thicknesses, calculated from neutron reflectivity, have allowed us to determine the tilt angle of the lipid molecules as a function of the support's charge density. The lipid molecules are tilted 55 degrees from the surface normal at zero charge density but become significantly more perpendicular (30 degrees tilt angle) at charge densities more negative than -8 microC cm(-2). The tilt angle measurements are in very good agreement with previous IR studies. This paper describes the highlights of a more in-depth study which is fully described in [1].     

Diffusive dynamics of vesicles tethered to a fluid supported bilayer by single-particle tracking

We recently introduced a method to tether intact phospholipid vesicles onto a fluid supported lipid bilayer using DNA hybridization (Yoshina-Ishii, C.; Miller, G. P.; Kraft, M. L; Kool, E. T.; Boxer, S. G. J. Am. Chem. Soc. 2005, 127, 1356-1357). Once tethered, the vesicles can diffuse in two dimensions parallel to the supported membrane surface. The average diffusion coefficient, D, is typically 0.2 microm(2)/s; this is 3-5 times smaller than for individual lipid or DNA-lipid conjugate diffusion in supported bilayers. In this article, we investigate the origin of this difference in the diffusive dynamics of tethered vesicles by single-particle tracking under collision-free conditions. D is insensitive to tethered vesicle size from 30 to 200 nm, as well as a 3-fold change in the viscosity of the bulk medium. The addition of macromolecules such as poly(ethylene glycol) reversibly stops the motion of tethered vesicles without causing the exchange of lipids between the tethered vesicle and supported bilayer. This is explained as a depletion effect at the interface between tethered vesicles and the supported bilayer. Ca ions lead to transient vesicle-vesicle interactions when tethered vesicles contain negatively charged lipids, and vesicle diffusion is greatly reduced upon Ca ion addition when negatively charged lipids are present both in the supported bilayer and tethered vesicles. Both effects are interesting in their own right, and they also suggest that tethered vesicle-supported bilayer interactions are possible; this may be the origin of the reduction in D for tethered vesicles. In addition, the effects of surface defects that reversibly trap diffusing vesicles are modeled by Monte Carlo simulations. This shows that a significant reduction in D can be observed while maintaining normal diffusion behavior on the time scale of our experiments.     

Electric field driven changes of a gramicidin containing lipid bilayer supported on a Au(111) surface

Langmuir-Blodgett and Langmuir-Schaeffer methods were employed to deposit a mixed bilayer consisting of 90% of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 10% of gramicidin (GD), a short 15 residue ion channel forming peptide, onto a Au(111) electrode surface. This architecture allowed us to investigate the effect of the electrostatic potential applied to the electrode on the orientation and conformation of DMPC molecules in the bilayer containing the ion channel. The charge density data were determined from chronocoulometry experiments. The electric field and the potential across the membrane were determined through the use of charge density curves. The magnitudes of potentials across the gold-supported biomimetic membrane were comparable to the transmembrane potential acting on a natural membrane. The information regarding the orientation and conformation of DMPC and GD molecules in the bilayer was obtained from photon polarization modulation infrared reflection absorption spectroscopy (PMIRRAS) measurements. The results show that the bilayer is adsorbed, in direct contact with the metal surface, when the potential across the interface is more positive than -0.4 V and is lifted from the gold surface when the potential across the interface is more negative than -0.4 V. This change in the state of the bilayer has a significant impact on the orientation and conformation of the phospholipid and gramicidin molecules. The potential induced changes in the membrane containing peptide were compared to the changes in the structure of the pure DMPC bilayer determined in earlier studies.     

Ultra-high vacuum surface analysis study of rhodopsin incorporation into supported lipid bilayers

Planar supported lipid bilayers that are stable under ambient atmospheric and ultra-high-vacuum conditions were prepared by cross-linking polymerization of bis-sorbylphosphatidylcholine (bis-SorbPC). X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS) were employed to investigate bilayers that were cross-linked using either redox-initiated radical polymerization or ultraviolet photopolymerization. The redox method yields a more structurally intact bilayer; however, the UV method is more compatible with incorporation of transmembrane proteins. UV polymerization was therefore used to prepare cross-linked bilayers with incorporated bovine rhodopsin, a light-activated, G-protein-coupled receptor (GPCR). A previous study (Subramaniam, V.; Alves, I. D.; Salgado, G. F. J.; Lau, P. W.; Wysocki, R. J.; Salamon, Z.; Tollin, G.; Hruby, V. J.; Brown, M. F.; Saavedra, S. S. J. Am. Chem. Soc. 2005, 127, 5320-5321) showed that rhodopsin retains photoactivity after incorporation into UV-polymerized bis-SorbPC, but did not address how the protein is associated with the bilayer. In this study, we show that rhodopsin is retained in supported bilayers of poly(bis-SorbPC) under ultra-high-vacuum conditions, on the basis of the increase in the XPS nitrogen concentration and the presence of characteristic amino acid peaks in the ToF-SIMS data. Angle-resolved XPS data show that the protein is inserted into the bilayer, rather than adsorbed on the bilayer surface. This is the first study to demonstrate the use of ultra-high-vacuum techniques for structural studies of supported proteolipid bilayers.     

Chain-melting phase transition and short-range molecular interactions in phospholipid foam bilayers

Occurrence of two-dimensional chain melting phase transition in foam bilayers was established for the first time. Microscopic horizontal foam bilayers [Newton black films (NBF)] were investigated by the microinterferometric method of Scheludko-Exerowa. The foam bilayers were formed from water-ethanol solutions of dimyristoylphosphatidylcholine (DMPC) and dipalmitoylphosphatidylcholine (DPPC) and egg phosphatidylcholine (Egg PC) and samples of amniotic fluid (AF) at different temperatures. The influence of temperature on the foam bilayer thickness h(w) and on the critical concentration Cc for formation of foam bilayer was studied. It was shown that in the range of the main phase transition the temperature dependence of h(w) and C(c) changed specifically in the case of DMPC and DPPC foam bilayers. The thickness of the foam bilayers increased with decreasing temperature in the range of the main phase transition due to the melting of hydrocarbon tails of phospholipid molecules. These changes took place at the temperatures of the bulk chain-melting phase transitions, as determined by differential scanning calorimetry (DSC) for both aqueous, and water/ethanol DMPC, DPPC, and DPPC dispersions. An effect of the 'disperse medium' on h(w) was found for foam bilayers from DPPC. The results that foam bilayers could have different thickness at different temperatures disproved the current concept that NBF acquired constant thickness at concentrations higher than C(el,cr). The data for Cc were analysed on the basis of the hole-nucleation theory of bilayer stability of Kashchiev and Exerowa. This theory considered the amphiphile bilayer as a two-dimensional ordered system with short-range molecular interactions between the first neighbour molecules (as in a crystal). The short-range molecular interactions were presented by the parameter binding energy Q of an amphiphile molecule in the bilayer. The binding energy Q of two neighbouring phospholipids was calculated for the gel (30-60 kT) and liquid crystalline state (16-18 kT) of the bilayers from DMPC, DPPC, Egg PC, AF. Concentration/temperature phase diagram of DPPC foam bilayers that defined regions of gaseous (ruptured), gel and liquid crystalline foam bilayers were drawn. The values of Q obtained for various samples were very close and vary from 5.3 x 10(-20) to 9.4 x 10(-20) (approx. 13-22 kT) which indicated that in all cases the foam bilayers were in liquid-crystalline state. This is an important result since the parameter studied-threshold concentration (threshold dilution) is crucial for a very successful assessment of the risk for respiratory distress syndrome (RDS) in newborns and could be employed in medicine for assessment of other respiratory disturbances. It is to be expected that foam bilayers from phospholipids could be used as a model for investigation of short-range forces in biological structures, of interaction between membranes, etc.     

Electrochemical and PM-IRRAS studies of potential controlled transformations of phospholipid layers on Au(111) electrodes

Chronocoulometry and photon polarisation modulation infrared reflection absorption spectroscopy (PM-IRRAS) have been employed to study the fusion of dimyristoylphosphatidylcholine (DMPC) vesicles onto a Au(111) electrode surface. The results show that fusion of the vesicles is controlled by the electrode potential or charge at the electrode surface (sigmaM). At charge densities of -15 microC cm(-2) < sigmaM < 0 microC cm(-2), DMPC vesicles fuse to form a condensed film. When sigmaM < -15 microC cm(-2), de-wetting of the film from the electrode surface occurs. The film is detached from the electrode surface; however, phospholipid molecules remain in its close proximity in an ad-vesicle state. The state of the film can be conveniently changed by adjustment of the potential applied to the gold electrode. PM-IRRAS experiments demonstrated that the potential-controlled transitions between various DMPC states proceed without conformational changes and changes in the packing of the acyl chains of DMPC molecules. However, a remarkable change in the tilt angle of the acyl chains with respect to the surface normal occurs when ad-vesicles spread to form a film at the gold surface. When the bilayer is formed at the gold surface, the acyl chains of DMPC molecules are significantly tilted. The IR spectra have also demonstrated a pronounced change in the hydration of the polar head region that accompanies the spreading of ad-vesicles into the film. For the film deposited at the electrode surface, the infrared results showed that the temperature-controlled phase transition from the gel state to the liquid crystalline state occurs within the same temperature range as that observed for aqueous solutions of vesicles. The results presented in this work show that PM-FTIR spectroscopy, in combination with electrochemical techniques, is an extremely powerful tool for the study of the structure of model membrane systems at electrode surfaces.     

STM studies of fusion of cholesterol suspensions and mixed 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)/cholesterol vesicles onto a Au(111) electrode surface

Electrochemical scanning tunneling microscopy (EC-STM) has been applied to study the structure of the film formed by fusion of cholesterol suspensions and mixed dimyristoylphosphatidylcholine (DMPC)/cholesterol vesicles on a Au(111) electrode surface. It has been demonstrated that cholesterol molecules assemble at the gold support into several structures templated by the crystallography of the metal surface and involving flat or edge-on adsorbed molecules. Studies of the film formed by fusion of mixed DMPC/cholesterol vesicles revealed that ordered domains of either pure DMPC or pure cholesterol were formed. These results indicate that, at the metal surface, the molecules released by the rupture of a vesicle initially self-assemble into a well-ordered monolayer. The self-assembly is controlled by the hydrocarbon skeleton-metal surface interaction. In the case of mixed DMPC/cholesterol vesicles, the molecule-metal interactions induce segregation of the two components into single component domains. However, the molecule-metal interaction induced monolayer is a transient phenomenon. When more molecules accumulate at the surface, the molecule-molecule interactions dominate the assembly, and the monolayer is transformed into a bilayer.     

Effects of lipid chain length on molecular interactions between paclitaxel and phospholipid within model biomembranes

Molecular interactions between an anticancer drug, paclitaxel, and phosphatidylcholine (PC) of various chain lengths were investigated in the present work by the Langmuir film balance technique and differential scanning calorimetry (DSC). Both the lipid monolayer at the air-water interface and lipid bilayer vesicles (liposomes) were employed as model biological cell membranes. Measurement and analysis of the surface pressure versus molecular area curves of the mixed monolayers of phospholipids and paclitaxel under various molar ratio showed that phospholipids and paclitaxel formed a nonideal miscible system at the interface. Paclitaxel exerted an area-condensing effect on the lipid monolayer at small molecular surface areas and an area-expanding effect at large molecular areas, which could be explained by the intermolecular forces and geometric accommodation between the two components. Paclitaxel and phospholipids could form thermodynamically stable monolayer systems: the stability increased with the chain length in the order DMPC (C14:0)>DPPC (C16:0)>DSPC (C18:0). Investigation of paclitaxel penetration into the pure lipid monolayer showed that DMPC had a higher ability to incorporate paclitaxel and the critical surface pressure for paclitaxel penetration also increased with the chain length in the order DMPC>DPPC>DSPC. A similar trend was testified by DSC studies on vesicles of the mixed paclitaxel/phospholipids bilayer. Paclitaxel showed the greatest interaction with DMPC while little interaction could be measured in the paclitaxel/DSPC liposomes. Paclitaxel caused broadening of the main phase transition without significant change at the peak melting temperature of the phospholipid bilayers, which demonstrated that paclitaxel was localized in the outer hydrophobic cooperative zone of the bilayer. The interaction between paclitaxel and phospholipid was nonspecific and the dominant factor in this interaction was the van der Waals force or hydrophobic force. As the result of the lower net van der Waals interaction between hydrocarbon chains for the shorter acyl chains, paclitaxel interacted more readily with phospholipids of shorter chain length, which also increased the bilayer intermolecular spacing.     

Formation of a ripple phase in nanotubular dimyristoylphosphatidylcholine bilayers confined inside nanoporous aluminum oxide substrates observed by DSC

Phase properties of substrate-supported nanotubular dimyristoylphosphatidylcholine (DMPC) bilayers confined within nanoporous channels of anodic aluminum oxide were characterized by DSC and compared with unsupported vesicles. In addition to the main phase transition, all samples exhibited a pretransition with a characteristic midpoint hysteresis between heating and cooling scans. The pretransition indicates that nanotubular bilayers could exist in a ripple phase, whereas hysteresis points to a similarity in the phase transition mechanisms. Observance of the ripple phase in lipid nanotubes is an indication of fully hydrated and only slightly perturbed bilayer surface.     

Impact of Strong and Weak Lipid–Protein Interactions on the Structure of a Lipid Bilayer on a Gold Electrode Surface

A lipid bilayer deposited on an electrode surface can serve as a benchmark system to investigate lipid–protein interactions in the presence of physiological electric fields. Recoverin and myelin‐associated glycoprotein (MAG) are used to study the impact of strong and weak protein–lipid interactions on the structure of model lipid bilayers, respectively. The structural changes in lipid bilayers are followed using electrochemical polarization modulation infrared reflection–absorption spectroscopy (PM IRRAS). Recoverin contains a myristoyl group that anchors in the hydrophobic part of a cell membrane. Insertion of the protein into the 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphatidylcholine (DMPC)–cholesterol lipid bilayer leads to an increase in the capacitance of the lipid film adsorbed on a gold electrode surface. The stability and kinetics of the electric‐field‐driven adsorption–desorption process are not affected by the interaction with protein. Upon interaction with recoverin, the hydrophobic hydrocarbon chains become less ordered. The polar head groups are separated from each other, which allows for recoverin association in the membrane. MAG is known to interact with glycolipids present on the surface of a cell membrane. Upon probing the interaction of the DMPC–cholesterol–glycolipid bilayer with MAG a slight decrease in the capacity of the adsorbed lipid film is observed. The stability of the lipid bilayer increases towards negative potentials. At the molecular scale this interaction results in minor changes in the structure of the lipid bilayer. MAG causes small ordering in the hydrocarbon chains region and an increase in the hydration of the polar head groups. Combining an electrochemical approach with a structure‐sensitive technique, such as PM IRRAS, is a powerful tool to follow small but significant changes in the structure of a supramolecular assembly.     

Electrochemical and PM-IRRAS studies of the effect of the static electric field on the structure of the DMPC bilayer supported at a Au(111) electrode surface

Differential capacity, charge density measurements, and polarization modulation infrared reflection absorption spectroscopy (PM-IRRAS) were employed to study the fusion of small unilamellar vesicles of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on a Au(111) electrode surface. The differential capacity and charge density data showed that the vesicles fuse onto the gold surface at charge densities between -10 microC/cm(2) < sigma(M) < 10 microC/cm(2) to form a bilayer. When sigma(M) < -10 microC/cm(2), the film is detached from the surface but it remains in close proximity to the surface. PM-IRRAS experiments provided IR spectra for the bilayer in the adsorbed and the desorbed state. Ab initio normal coordinate calculations were performed to assist interpretation of the IR spectra. The IR bands were analyzed quantitatively, and this analysis provided information concerning the conformation and orientation of the acyl chains and the polar head region of the DMPC molecule. The orientation of the chains, hydration, and conformation of the headgroup of the DMPC molecule strongly depend on the electrode potential.     

Probing the molecular-scale lipid bilayer response to shear flow using nonequilibrium molecular dynamics

A nonequilibrium molecular dynamics simulation of the response of dimyristoylphosphatidylcholine (DMPC) bilayers to a solvent shear flow is presented. Application of shear flow to planar, stationary DMPC bilayers results in a redistribution of the membrane density profile along the bilayer normal due to the alignment of the lipids in the direction of flow and an increase in average lipid chain length. An increase in the intermolecular and intramolecular order of the lipids in response to the shear flow is also observed. This study provides groundwork for understanding the mechanism of the full response of lipid bilayers to externally imposed solvent shear flows, beginning with the response in the absence of collective lipid motions such as undulations and bilayer flow.