Elaboration of self-organized magnetic nanoparticles by selective cobalt silicidation

Self-organized magnetic nanoparticles are obtained through selective silicidation of cobalt using a silicon substrate pre-structured with tri-dimensional gold islands as template. On the step bunches array of a vicinal Si(1 1 1) surface, gold deposition results in the formation of nanodroplets aligned along the step bunches. A subsequent cobalt deposition is performed onto this gold islands-covered Si surface, with two silicidation processes investigated: reactive deposition (RD) and solid phase reaction (SPR). The cobalt is converted into a non-magnetic silicide film except where the surface is locally masked by the gold islands, giving rise to cobalt nanomagnets which can be capped by a gold layer. A scanning tunneling microscopy comparative study of RD and SPR processes demonstrates that the former induces strong surface morphology changes while the latter preserves the pristine islands. Magnetic measurements performed with alternating gradient force magnetometry at room temperature are used to demonstrate the presence of ferromagnetic cobalt nanoparticles on SPR-processed samples. These nanomagnets show a clear in-plane anisotropy behavior.     

Surface restructuring process on a Ag/Ge(0 0 1) surface studied by photoelectron spectroscopy

The atomic structure and charge distribution of Ag adsorbed Ge(0 0 1) surfaces have been investigated by means of Ge 3d core- and Ag 4d core-levels photoelectron spectroscopy. A mono-atomic layer of Ag was deposited on the clean Ge(0 0 1) c(4×2) surface at 80 K. The Ge 3d spectrum measured at 80 K was deconvoluted into two surface components, which is consistent with the previously proposed Ag ad-dimer model. After annealing the surface at room temperature, the rearrangement of the charge distribution was revealed to include electron transfer from Ge to Ag in conjunction with the surface restructuring process by the annealing.     

Structural modifications of diamond like carbon films induced by MeV nitrogen ion irradiation

Diamond-like carbon (DLC) films were deposited on Si(1 0 0) substrates using plasma deposition technique. The deposited films were irradiated using 2 MeV N⁺ ions at fluences of 1×10¹⁴, 1×10¹⁵ and 5×10¹⁵ ions/cm². Samples have been characterized by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Analysis of Raman spectra shows a gradual shift of both D and G band peaks towards higher frequencies along with an increase of the intensity ratio, I(D)/I(G), with increasing ion fluence in irradiation. These results are consistent with an increase of sp² bonding. XPS results also show a monotonic increase of sp²/sp³ hybridization ratio with increasing ion fluence. Plan view TEM images show the formation of clusters in the irradiated DLC films. HRTEM micrographs from the samples irradiated at a fluence of 5×10¹⁵ ions/cm² show the lattice image with an average interplanar spacing of 0.34 nm, revealing that the clusters are graphite clusters. The crystallographic planes in these clusters are somewhat distorted compared to the perfect graphite structure.     

Dynamics of electrons and holes at surfaces

We present ab initio calculation results for electron-phonon (e-ph) contribution to hole lifetime broadening of the surface state on Al(0 0 1). We show that e-ph coupling in this state is significantly stronger than in bulk Al at the Fermi level. It makes the e-ph decay channel very important in the formation of the hole decay in the surface state at . We also present the results for e-e lifetime broadening in a quantum-well state in 1 ML K/Cu(1 1 1). We show that this contribution is not negligible and is much larger than that in a surface state on Ag(1 1 1).     

Stabilization of the pentagonal surface of the icosahedral AlPdMn quasicrystal by controlled Si absorption

The Debye-temperature of the pentagonal surface of the icosahedral AlPdMn quasicrystal (QC) is measured by means of low-energy electron diffraction after the absorption of different amounts of Si. We observe an increase of the surface Debye-temperature from 300±7 K for the freshly prepared surface to 330±7 K after the absorption of 60-Å Si. Because the quasicrystalline order persists at the surface in spite of the diffusion of Si into the substrate, we suggest that the diffusion is dominated by a vacancy-mediated process.     

Proximity effects in a superconductor/ferromagnet junction

A proximity effect in an s-wave superconductor/ferromagnet (SC/F) junction is theoretically studied using the second order perturbation theory for the tunneling Hamiltonian and Green's function method. We calculate a pair amplitude induced by the proximity effect in a weak ferromagnetic metal (FM) and a half-metal (HM). In the SC/FM junction, it is found that a spin-singlet pair amplitude (Ψ_s) and spin-triplet pair amplitude (Ψ_t) are induced in FM and both amplitudes depend on the frequency in the Matsubara representation. Ψ_s is an even function and Ψ_t is an odd function with respect to the Matsubara frequency (ω_n). In the SC/HM junction, we examine the proximity effects by taking account of magnon excitations in HM. It is found that the triplet-pair correlation is induced in HM. The induced pair amplitude in HM shows a damped oscillation as a function of the position and contains the terms of even and odd functions of ω_n as in the case of the SC/FM junction. We discuss that in our tunneling model the pair amplitude of even function of ω_n only contributes to a Josephson current.     

Changes in the shapes of self-organized PbSe quantum dots during PbEuTe overgrowth investigated by anomalous X-ray diffraction

Anomalous X-ray diffraction was used for the investigation of shape and chemical composition of self-organized PbSe quantum dots covered by PbEuTe capping layers. From reciprocal-space maps of diffracted intensities measured at two energies of the primary radiation, we discriminated the contributions of the dot volumes and the surrounding crystal lattice to the diffracted intensity. We have found that the presence of Eu atoms suppresses the flattening of the dots during their overgrowth.     

Intense laser effects on donor impurity in a cylindrical single and vertically coupled quantum dots under combined effects of hydrostatic pressure and applied electric field

Using the effective mass and parabolic band approximations and a variational procedure we have calculated the combined effects of intense laser radiation, hydrostatic pressure, and applied electric field on shallow-donor impurity confined in cylindrical-shaped single and double GaAs-Ga_1−xAl_xAs QD. Several impurity positions and inputs of the heterostructure dimensions, hydrostatic pressure, and applied electric field have been considered. The laser effects have been introduced by a perturbative scheme in which the Coulomb and the barrier potentials are modified to obtain dressed potentials. Our findings suggest that (1) for on-center impurities in single QD the binding energy is a decreasing function of the dressing parameter and for small dot dimensions of the structures (lengths and radius) the binding energy is more sensitive to the dressing parameter, (2) the binding energy is an increasing/decreasing function of the hydrostatic pressure/applied electric field, (3) the effects of the intense laser field and applied electric field on the binding energy are dominant over the hydrostatic pressure effects, (4) in vertically coupled QD the binding energy for donor impurity located in the barrier region is smaller than for impurities in the well regions and can be strongly modified by the laser radiation, and finally (5) in asymmetrical double QD heterostructures the binding energy as a function of the impurity positions follows a similar behavior to the observed for the amplitude of probability of the noncorrelated electron wave function.     

Odd-frequency pairing state in superconducting junctions

Using the quasiclassical Green's function formalism, we study the induced odd-frequency pairing states in ballistic normal metal-superconductor (N/S) junctions where a superconductor has even-frequency symmetry in the bulk and a normal metal layer has an arbitrary length. We show that the concept of the odd-frequency pairing state plays an important role to interpret a McMillan-Rowell bound state in the normal metal.     

Point-contact study of the heavy-fermion superconductor CeCoIn5

We have investigated the differential conductance spectra of the point contacts between the heavy-fermion superconductor CeCoIn₅ and Pt. Many of them show a double-maximum structure that indicates the superconducting energy gap Δ. The Δ values derived using Blonder-Tinkham-Klapwijk model, however, varies from 0.47 to 0.77 meV, and yet they are within the scatter of the reported values. The evolution of Δ below T_c is slow as compared with that of BCS gap probably reflecting the unconventional superconductivity in CeCoIn₅.     

Angle-resolved photoemission spectroscopy of band tails and anomalous kinetics of underdoped cuprates

The electron-phonon interaction in cuprates with c-axis polarised optical phonons, which is roughly one order of magnitude stronger than superexchange, bounds holes into mobile bipolarons. Bipolarons pin the chemical potential within the charge-transfer gap of doped Mott insulators, accounting for unusual kinetics and thermodynamics of doped cuprates such as the Nernst and giant proximity effects, pseudo-gaps, and normal-state diamagnetism. We propose that “quasi-particle” peaks, “Fermi-arcs”, and high-energy “waterfalls” in the photoemission spectra of cuprates originate from the photo-ionization matrix elements of disorder-localised band-tails in the charge-transfer gap.     

Influence of the charge concentration on the density of states in a two-dimensional superconducting system

The gap and the density of states of high-T_c superconductors have been a subject of paramount interest. In order to explain the observed experimental behavior several pairing mechanisms in high-temperature superconductivity have been considered, by theoretical calculations. In this work, within the BCS scheme, a two-band model with energy band overlapping is introduced. The gap parameter and the density of states in a two-dimensional superconducting system are studied as functions of the charge concentration. This model is applied to Bi2212 in order to obtain numerical results.     

The effects of Dresselhaus and Rashba spin-orbit interactions on the electron tunneling in a non-magnetic heterostructure

We theoretically investigate the electron transport properties in a non-magnetic heterostructure with both Dresselhaus and Rashba spin-orbit interactions. The detailed-numerical results show that (1) the large spin polarization can be achieved due to Dresselhaus and Rashba spin-orbit couplings induced splitting of the resonant level, although the magnetic field is zero in such a structure, (2) the Rashba spin-orbit coupling plays a greater role on the spin polarization than the Dresselhaus spin-orbit interaction does, and (3) the transmission probability and the spin polarization both periodically change with the increase of the well width.     

Etching and forward transfer of fused silica in solid-phase by femtosecond laser-induced solid etching (LISE)

We present a femtosecond laser-based technique for etching and forward transfer of bulk transparent materials in solid-phase. Femtosecond laser pulses with were focused through a fused silica block onto an absorbing thin film of Cr. A constraining Si wafer was pressed into tight contact with the Cr film to prevent lift-off of the film. A combination of the high temperature and pressure of the Cr, and compressive stress from the Si, resulted in etching of smooth features from the fused silica by cracking. Unlike in conventional ablative or chemical etching, the silica was removed from the bulk as single solid-phase pieces which could be collected on the Si. Using this so-called laser-induced solid etching (LISE) technique, 1-2 m deep pits and channels have been produced in the silica surface, and corresponding dots and lines deposited on the Si. The threshold fluence for etching was found to be with duration pulses. The morphology of the etched features are investigated as functions of fluence and exposure to multiple pulses.     

CoO under pressure from first principles

Density functional theory and the generalized gradient approximation with correction for Hubbard energy was used to study the behavior of cobaltous oxide (CoO) under pressure. CoO undergoes an insulator-metal transition which is accompanied by a magnetic collapse. The antiferromagnetic phase of CoO transforms to nonmagnetic phase with the 6-7% reduction in the fractional volume. The magnetic collapse and the energy band gap closure are driven by the lost of correlation which results from the delocalization of 3d electrons. Delocalization process is due to the band broadening with compression. The Hubbard energy influences the transitions pressure. The lower Hubbard terms result in the lower values of transition pressure. The evolution of magnetic moment, energy band gap, and the bandwidth versus increasing pressure is analyzed. The results of calculations are compared to the existing theoretical and experimental data.     

Contact and phonon scattering effects on quantum transport properties of carbon-nanotube field-effect transistors

We investigated the phonon scattering effects on the transport properties of carbon nanotube devices with micron-order lengths at room temperature, using the time-dependent wave-packet approach based on the Kubo formula within a tight-binding approximation. We studied the scattering effects of both the longitudinal acoustic and the optical phonons on the transport properties. The conductance of semiconducting nanotubes is decreased by the acoustic phonon, instead of the optical phonon. Furthermore, we clarified how the electron mobilities of the devices are affected by the acoustic phonon.     

Temperature dependent photoluminescence down to 4.2 K in EuTFC

The temperature dependence of photoluminescence in Europium tris[3-(trifluoro-methylhydroxymethylene)-(+)-camphorate] (EuTFC) embedded in polymer films has been examined from 40 K down to 4.2 K with the goal of preparing sensor films for low-temperature thermal imaging. The behavior of EuTFC showed significant difference when based on polystyrene compared to poly(n-alkyl methacrylate)s. In poly(n-alkyl methacrylate)s prepared by standard methods for imaging applications, the photoluminescence is fully saturated below 30 K, whereas in polystyrene films there is a strong temperature dependence even down to 4.2 K. By optimizing the preparation procedure for films made of poly(butyl methacrylate) (PBMA) and poly(methyl methacrylate), also these polymers became very sensitive down to liquid helium temperature. The maximum temperature sensitivity of EuTFC in PBMA is found to be 1.0%/K at 4.2 K. The problem of delamination and cracking of the polymer film at cryogenic temperature is also avoided by the special preparation method.     

Nanoscale observations of the operational failure for phase-change-type nonvolatile memory devices using Ge2Sb2Te5 chalcogenide thin films

In this study, a phase-change memory device was fabricated and the origin of device failure mode was examined using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Ge₂Sb₂Te₅ (GST) was used as the active phase-change material in the memory device and the active pore size was designed to be 0.5 m. After the programming signals of more than 2×10⁶ cycles were repeatedly applied to the device, the high-resistance memory state (reset) could not be rewritten and the cell resistance was fixed at the low-resistance state (set). Based on TEM and EDS studies, Sb excess and Ge deficiency in the device operating region had a strong effect on device reliability, especially under endurance-demanding conditions. An abnormal segregation and oxidation of Ge also was observed in the region between the device operating and inactive peripheral regions. To guarantee an data endurability of more than 1×10¹⁰ cycles of PRAM, it is very important to develop phase-change materials with more stable compositions and to reduce the current required for programming.     

Band alignments at SrZrO3/Ge(0 0 1) interface: Thermal annealing effects

High-κ dielectrics SrZrO₃ were prepared on Ge(0 0 1) substrate using pulse laser deposition, and band alignments and thermal annealing effects were studied with high resolution X-ray photoemission spectroscopy. Valence and conduction band offsets at this interface were measured to be 3.26 eV and 1.77 eV, respectively. Interfacial Ge oxide layers were found at the interface. After annealing at 600 °C, the interfacial Ge oxide layers were eliminated, and the valence band offset increased to 3.50 eV, but the amorphous SrZrO₃ became polycrystalline in the meantime.     

Zipf distribution in top Chinese firms and an economic explanation

By analyzing the data of top 500 Chinese firms from the year 2002 to 2007, we reveal that their revenues and ranks obey the Zipf’s law with exponent of 1 for each year. This result confirms the universality of firm size character which has been presented in many other empirical works, since China possesses a unique ideological and political system. We offer an explanation of it based on a simple economic model which takes production and capital accumulation into account.