Imaging of ferroelectric vinylidene fluoride and trifluoroethylene copolymer films by scanning tunneling microscopy

In this paper, we reported the possibility to image non-conducting P(VDF-TrFE) copolymer films by STM. The films had the thickness of ∼25.0 nm and were spin-coated onto Au or graphite substrates. For films deposited on Au substrates, STM images showed grain structures of ∼100 nm, much larger than the grains of bare Au substrate. With increased scan rate, the film surface was damaged by STM tip and extreme protrusions and holes were observed. For films deposited on graphite substrates, we only obtained an image of very flat plane and could not observe the topography of the film surface. It seemed that the tip had pierced through the uppermost P(VDF-TrFE) layers and only imaged the layers nearest to the substrate. Asymmetrical current-voltage curves were observed from copolymer films deposited on HOPG. Experimental results were discussed.     

Two-dimensional self-assembly of esters with different configurations at the liquid-solid interface

Self-assembled monolayers of hexadecyl palmitate (HP) and 3,3′-thiodipropionic acid di-n-octadecyl ester (TADE) physisorbed on highly oriented pyrolytic graphite (HOPG) are investigated using scanning tunneling microscope (STM) and computer simulation. Both molecules form alkane-like linear shapes to maximize the interactions with substrate when they adsorb on HOPG surface. The HP molecules self-assemble into lamellae with the chain-trough angle of 48°, which is the result of a shifting 3/2 units from the adjacent molecule in a lamella. Based on the simulation insights combined with STM images, we confirm that a perpendicular orientation appears in which the HP molecular backbone is rotated 90° with respect to the substrate such that the carbonyl points away from the HOPG surface. TADE molecules form three kinds of configurations with chain-trough angles of 90°, 72° and 60° by shifting 0, 1/2 and 1 units from their adjacent molecules, respectively. The bright stripes in STM images reveal the electron density distribution of the part between two ester groups. The energy differences of three TADE adsorption configurations by molecular mechanics (MM) simulation are used to explain the structural coexistence phenomenon. It is also shown that lattice match between alkyl chain of molecules and HOPG substrate could change molecular conformation upon self-assembly.     

STM characterisation of organic molecules on H-terminated Si(111)

We present the first high resolution STM images of organic molecules on the technological important hydrogen terminated silicon surface. Ordered layers of PTCDA and PTCDI were prepared on this surface by organic molecular beam epitaxy. The submolecular contrast of these molecules on Si(111)/H obtained in the high resolution images agrees with the corresponding images on HOPG and MoS₂ substrates.     

Self-assembled monolayers of radical molecules physisorbed on HOPG(0 0 0 1) substrate studied by scanning tunnelling microscopy and electron paramagnetic resonance techniques

In this paper, we present a combined STM and EPR study on the adsorption and self-organization of monolayers formed from 2-(14-Carboxytetradecyl)-2-ethyl-4,4-dimethyl-3-oxazolidinyloxy (16DS) and 4′,4′-Dimethylspiro(5α-cholestane-3,2′-oxazolidin)-3′-yloxy (CSL) adsorbed on a highly oriented pyrolitic graphite HOPG(0 0 0 1) substrate. Both 16DS and CSL molecules are persistent free radicals containing a paramagnetic doxyl group. The STM measurements of 16DS on HOPG(0 0 0 1) were performed at the liquid-solid interface while the studies of CSL on HOPG(0 0 0 1) were carried out under ultrahigh vacuum conditions. It was found that the 16DS molecules on the HOPG(0 0 0 1) surface form a highly-ordered monolayer with a domain structure. The high-resolution STM images show structural details of 16DS molecules on HOPG(0 0 0 1) revealing the paramagnetic doxyl group. In contrast, CSL molecules on HOPG(0 0 0 1) form a well-ordered monolayer without domain structure. The EPR results indicate that both compounds deposited on HOPG(0 0 0 1) substrate are not reduced and retain their paramagnetic character. We believe that the molecular systems described can be used in single spin detection experiments using an electron spin noise-scanning tunnelling microscopy (ESN-STM) technique. In particular, the possibility of obtaining contrast spin signals from the paramagnetic and diamagnetic parts of molecules increases the significance of our results.     

Influence of hydrogen bonds and double bonds on the alkane and alkene derivatives self-assembled monolayers on HOPG surface: STM observation and computer simulation

The adsorption structure and hydrogen-bonded complexes of alkane and alkene derivatives self-assembled on HOPG were studied by scanning tunneling microscopy (STM) and Molecular Mechanics (MM) simulations. The effect of different interior -CHCH- conformations and functional groups in molecules on the structure and stability of self-assembled monolayers was considered. It was found that octadecanol and trans-oleic acid could form stable structure on HOPG and their high-resolution images could be obtained by STM. Octadecanol exhibited two kinds of packing by alkyl-alkyl and adsorbate-substrate interactions. The interior trans-CHCH- group in trans-oleic acid had a slight influence on the self-assembly configuration. However, owing to the cis-double bond in the interior of cis-oleyamine molecule, the ordered monolayer could not be easily imaged by STM at ambient conditions. The adsorption conformations of three kinds of molecules on HOPG surface were optimized by MM simulation, respectively. The analysis of hydrogen-bond interactions by computation stimulation also revealed that the stability of cis-oleyamine on HOPG was the worst. These results demonstrated that molecular self-assembly and its stability could be significantly tailored by changing the molecular structure.     

Simultaneous observation of the triangular and honeycomb structures on highly oriented pyrolytic graphite at room temperature: An STM study

Scanning tunneling microscopy (STM) was used to study the surface structures of dry-prepared and di-chloroethane-treated HOPG samples. Both triangular and honeycomb structures were simultaneously observed with the same tip at room temperature around a strand (grain boundary) on the HOPG surface. This observation did not support the tip effect in STM imaging explanation for HOPG in literature. A general layer-sliding model was utilized to explain the experimental results: sliding of the HOPG topmost layer was used to explain the origins of the triangular and honeycomb structures, and molecule intercalation into inter-layer spacing between the first and second layers of HOPG induced inhomogeneous deformation of the HOPG topmost layer that accordingly generated the Moiré patterns of the HOPG sample in di-chloroethane.     

Formation of Gallium-induced nanostructures on single crystal HOPG surface

The room temperature growth of gallium atoms on the highly oriented pyrolytic graphite (HOPG) surface has been performed. The gallium atoms were deposited by thermal evaporation method in an ultra high vacuum system at a base pressure 5 × 10⁻¹⁰ torr. The X-ray photo electron spectroscopy (XPS) studies had been performed to confirm the presence of gallium atoms on HOPG surface. Scanning tunneling spectroscopy (STM) technique was employed to study the surface morphology of the clean HOPG surface and gallium covered HOPG surfaces which recognize the formation of gallium induced nanostructures. The deconvoluted XPS core level spectra of C (1s) and Ga (3d) demonstrate the possible interaction between substrate and the adsorbate atoms. The STM analysis revealed that the gallium deposition on HOPG led to significant change in the surface morphology. It was observed that the Ga atoms adsorbed as layer structure on HOPG surface for low coverage while quasi one-dimensional chain like nanostructure (1 ± 0.2 nm) has been formed for higher Ga coverage. The nanostructured surfaces induced by Ga deposition are found to be stable and could be used as a template for the growth of metallic nanostructures.     

Structure modification of highly ordered pyrolytic graphite by Ar plasma beam scanning at different incident angles

The surface of highly ordered pyrolytic graphite (HOPG) was modified by Ar plasma beam scanning at a controllable angle of incidence. The characteristics of plasma modified HOPG were investigated by atomic force microscope (AFM), micro-Raman, X-ray photoemission spectroscopy (XPS), and grazing incident angle of X-ray diffraction (GIAXRD). A smooth surface of HOPG can be obtained by adjusting the incident angles of Ar plasma beam scanning. The surfaces of HOPG become smoother with increasing angle of incidence after Ar plasma beam scanning. Raman spectra indicate that the plasma beam scanning breaks the hexagonal structures of sp² C=C bonds near the surface of HOPG. The broken hexagonal network structures can form C–O bonds that increase the amount of oxygen on the surface of HOPG, supported by C_1s and O_1s XPS spectra. GIAXRD data support that the co-existence of both crystalline structures of 2H and 3R in HOPG. The carbon bond breaking in 2H and 3R is different and depends on the angle of incidence. Most broken carbon bonds form damaged aromatic rings near the surface of HOPG.     

STM analysis of triosmium carbonyl cluster adsorption at HOPG

The study of metallic carbonyl clusters as precursors in tailoring the heterogeneous metal catalysts has been of great importance. The catalytic nature of the adsorbed clusters in thin film form depends on the chemical properties of the substrate used. The metal-support interaction will determine various properties such as the surface morphology, adsorption features and the structural orientations. We report a scanning tunneling microscopy (STM) study of an osmium carbonyl cluster (Os₃(CO)₁₁(NCCH₃)) adsorbed on highly oriented pyrolytic graphite (HOPG). STM measurements showed that the osmium carbonyl cluster interacts with HOPG in such a way that it adsorbs on the basal plane showing regular lattice structure, whereas the axial planes of the HOPG surface shows no ordered structure. The regular cluster lattice structure of the carbonyl cluster on the basal plane of the graphite has lattice parameters of a=1.4 nm and b=1.5 nm. We believe that the regular orientation of the cluster indicates a monolayer adsorption of the cluster on the graphite basal planes. Scanning tunneling spectroscopy (STS) measurements also indicated an insulating behavior for the cluster molecules on HOPG, with a significant energy gap value of ca. 300 mV. The cluster interaction at the active sites, i.e. axial planes of the graphite, was also observed by in situ STM measurements.     

Hydrogen bonds induced supramolecular self-assembly of azobenzene derivatives on the highly oriented pyrolytic graphite surface

The self-assembly of azobenzene derivatives (C_nAzCOOH) with various lengths of peripheral alkyl chains (with carbon number of n = 8, 10, 12, 14, 16) were observed by scanning tunneling microscopy on highly oriented pyrolytic graphite (HOPG) surface. The effect of van der Waals interactions and the intermolecular hydrogen bonding on the two-dimensional self-assembly was systematically studied. No alkyl-chain length effect was observed according to the STM images. All kinds of C_nAzCOOH adopting the same pattern self-assembled on the HOPG surface, suggesting the formation of the two-dimensional structures was dominated by the hydrogen bonding of the functional groups. It could be found that two C_nAzCOOH molecules formed a hydrogen-bonded dimer with “head-to-head” fashion as expected; however, the dimers organized themselves in the form of relative complex lamellae. Three dimers as a group arranged side by side and formed a well-defined stripe with periodic dislocations due to the registry mechanism of the alkyl chain with the underlying HOPG surface. The hydrogen bonds between the adjacent dimers in one lamella were formed and dominated the self-assembled pattern.     

Insight into STM image contrast of n-tetradecane and n-hexadecane molecules on highly oriented pyrolytic graphite

Two-dimensional ordered patterns of n-tetradecane (n-C₁₄H₃₀) and n-hexadecane (n-C₁₆H₃₄) molecules at liquid/graphite interface have been directly imaged using scanning tunneling microscope (STM) under ambient conditions. STM images reveal that the two different kinds of molecules self-organize into ordered lamellar structures in which alkane chains of the molecules extend along one of three equivalent lattice axes of highly oriented pyrolytic graphite (HOPG) basal plane. For n-C₁₄H₃₀ molecules, the molecular axes are observed to tilt by 60° with respect to inter-lamellar trough lines and the carbon backbones of the alkane chains are perpendicular to the HOPG basal plane in an all-trans conformation. However, for n-C₁₆H₃₄ molecules, the molecular axes are perpendicular to lamellar borders (90°) and the planes of the all-trans carbon skeletons are parallel to the graphite basal plane. The results clearly indicate that outmost hydrogen atoms of the alkane chains dominate atom-scaled features of the STM images. That is, in the case of long-chain alkane molecules, topographic effects dominantly determine STM image contrast of the methylene regions of the alkane chains that are adsorbed on HOPG.     

FOURIER ANALYSIS OF TEMPORAL AND SPATIAL OSCILLATIONS OF TUNNELING CURRENT IN SCANNING TUNNELING MICROSCOPY

Partially oxidized Si(111) surfaces and surfaces of highly oriented pyrolytic graphite (HOPG) were studied by two different ultrahigh vacuum scanning tunneling microscope (UHV-STM) systems and by an STM system working under ambient conditions, respectively. The STM current images of partially oxidized Si(111) surfaces and HOPG surfaces were analyzed by one/two-dimensional fast Fourier transformation (1D-FFT/2D-FFT). The phenomenon of temporal oscillations of tunneling current on the partially oxidized Si(111) surfaces was detected with both UHV-STM systems. Temporal as well as spatial oscillations of tunneling current appeared in highly resolved STM current images of the Si(111) surfaces simultaneously, but both kinds of oscillations could be discriminated according to their different influence on the 2D-FFT spectra of the current images, while varying the scanning range and rate. On clean HOPG surfaces only spatial oscillations of tunneling current induced by the surface structure were observed.     

扫描隧道显微镜研究石墨表面的莫尔图

利用扫描隧道显微镜研究石墨表面的大尺度周期性图样．研究结果表明,莫尔图起源于石墨深层的缺陷,实验结果与理论完全吻合,并且第一次在实验上证明了纳米波可以穿透多层石墨而没有明显衰减．     

Intercalation of lithium ions into bulk and powder highly oriented pyrolytic graphite

The electrochemical reactions of highly oriented pyrolytic graphite (HOPG) bulk and powder electrodes in 1 M LiPF₆ 1:1 EC/DMC solution were investigated and the results show that the intercalation reaction of lithium ion into HOPG electrode occurs only at the edge plane and SEI formation reaction on the basal plane is negligible in comparison with that on the edge plane. The active surface area of HOPG powder electrode could be deduced by comparing the peak area (consumed charge for SEI formation) at potential of 0.5 V on voltammograms with that of bulk HOPG edge electrode. The diffusion coefficients of lithium ion in HOPG bulk layers and in HOPG powder was for the first time measured by use of electrochemical impedance spectra and potential step chronamperameter methods. It was found that the diffusion coefficients of lithium in HOPG were in the range of 10⁻¹¹-10⁻¹² cm² s⁻¹ for the lithium-HOPG intercalation compounds at potentials from 0.2 (vs. Li/Li⁺) to 0.02 V, decreasing with the increase of lithium intercalation degree. A good agreement was obtained between the results from bulk and powder HOPG electrodes by electrochemical impedance spectra method.     

Observation of the Damage on HOPG Surface Induced by Ar+8 Ions

Highly oriented pyrolytic graphite (HOPG) samples were bombarded by Ar+8 ions with energy range from 10.1 to 112MeV. After bombardment the sample surfaces were observed using a STM and NanoScope. The resultS show that the energetic ion could cause observable praotrusionlike damage on the HOPG surface.The relationship betWeen damage and energy loss, and the possible mechanism of damage process are discussed.     

Ar+8轰击石墨表面损伤的扫描隧道显微镜观测研究

报道了用10—112MeV能量的Ar+8离子轰击高定向石墨造成损伤的原子水平观测结果,给出了损伤形貌、损伤大小和损伤数密度.讨论了损伤与表面核能损的关系及损伤过程的可能机制.     

An artefact in scanning tunneling microscopy images of highly oriented pyrolytic graphite

An artefact with a structure that appears as an ordered array of chains, several 1000 Å long and with distances of between 10 Å and 30 Å in STM images of HOPG is reported. The artefact, which emerges from a too low point density in the scanning grid during data aquisition in the scanning tunneling microscope, is explained using the atomically resolved image, the orientation of the substrate in the STM, the sequential character of data acquisition in scanning tunneling microscopy together with the limited number of data points for the reconstruction of STM images and related image-processing problems, and the specific noise spectrum of the tunneling current. The identification of the artefact is verified by a computer simulation of the STM images, which reproduces the experimental data in detail.     

Ordered arrays of myoglobin adsorbed on the surfactant modified surface by scanning tunneling microscopy

Myoglobin molecules were deposited on a surfactant sodium dodecyl sulfate modified HOPG surface and imaged in air with a high resolution scanning tunneling microscope (STM) for the first time. STM images exhibit not only ordered arrays of the surfactant molecules but also regular two-dimensional arrays of myoglobin molecules. From STM images, the myoglobin molecule can be described as an ellipsoid-shaped pattern for the tertiary structure. In this study the dimensions of a myoglobin molecule were determined approximately as 43.0 × 36.2 × 8 ų, which are in good agreement with the known data from X-ray analysis, except for the height of a molecule which cannot be estimated from STM.     

Self-organization of surfactant molecules on solid surface: an STM study of sodium alkyl sulfonates

Adsorption and self-organization of sodium alkyl sulfonates (STS and SHS) on HOPG have been studied by using in situ scanning tunneling microscopy (STM). Both SHS and STS molecules adsorb on HOPG surface and form long-range well-ordered monolayers. The molecular rows and the axes of alkyl chain of the molecules cross each other at angles of 60° and 90° in the STS and SHS layers, respectively. Molecular details such as sulfonate functional group (head) and alkyl chain are clearly imaged. The neighboring molecules in different rows form a “head to head” configuration. Structural models for the molecular arrangement of the two adlayers are proposed.     

Photon emission from adsorbed C60 molecules with sub-nanometer lateral resolution

We present the first experimental demonstration of spatially resolved photon emission of individual molecules on a surface. A scanning tunneling microscope (STM) was used as a local electron source to excite photon emission from hexagonal arrays of C₆₀ molecules on Au(110) surfaces. Specifically, we show that in maps of photon emission intensities, C₆₀ fullerenes appear as arrays of individual light emitters 4 Å in diameter and separated by 10 Å. Comparison with simultaneously recorded STM images reveals, that most intense emission is detected when the STM tip is centered above a molecule. The results demonstrate the highest spatial resolution of light emission to date using a scanning probe technique.