Excimer laser forward transfer of mammalian cells using a novel triazene absorbing layer

We present a novel laser-based approach for developing tissue engineered constructs and other cell-based assembly's. We have deposited mesoscopic patterns of viable B35 neuroblasts using a soft direct approach of the matrix assisted pulsed laser evaporation direct write (MAPLE DW) process. As a development of the conventional direct write process, an intermediate layer of absorbing triazene polymer is used to provide gentler and efficient transfers. Transferred cells were examined for viability and proliferation and compared with that of as-seeded cells to determine the efficacy of the process. Results suggest that successful transfers can be achieved at lower fluences than usual by the incorporation of the intermediate absorbing layer thus avoiding any damage to cells and other delicate materials. MAPLE DW offers rapid computer-controlled deposition of mesoscopic voxels at high spatial resolutions, with extreme versatility in depositing combinations of natural/synthetic, living/non-living, organic/inorganic and hard/soft materials. Our approach offers a gentle and efficient transfer of viable cells which when combined with a variety of matrix materials allows development of constructs and bioactive systems in bioengineering.     

Experimental study on microdeposition of the copper thin film by femtosecond laser-induced forward transfer

The morphologies of the deposited dots on the 40~nm-thick copper film by the femtosecond laser-induced forward transfer that depend on the irradiated laser fluence have been studied, and the variations of orderliness of the diameter of deposited dots on the quartz substrate and forward ablated dot on the donor substrate with increasing pulse fluence have been obtained experimentally. The experimental results show that a thinner copper film would generate larger-sized ablated dot and deposited dot at the threshold fluence for transfer. By x-ray diffraction measurement, it is demonstrated that the crystal form of the transferred copper films is unaltered and the size of the crystallites is diminished.     

Aryltriazene photopolymer thin films as sacrificial release layers for laser-assisted forward transfer systems: study of photoablative decomposition and transfer behavior

Thin films of a tailor-made photodecomposible aryltriazene polymer were applied in a modified laser-induced forward transfer (LIFT) process as sacrificial release layers. The photopolymer film acts as an intermediate energy-absorbing dynamic release layer (DRL) that decomposes efficiently into small volatile fragments upon UV laser irradiation. A fast-expanding pressure jet is generated which is used to propel an overlying transfer material from the source target onto a receiver. This DRL-assisted laser direct-write process allows the precise deposition of intact material pixels with micrometer resolution and by single laser pulses. Triazene-based photopolymer DRL donor systems were studied to derive optimum conditions for film thickness and laser fluences necessary for a defined transfer process at the emission wavelength of a XeCl excimer laser (308 nm). Photoablation, surface detachment, delamination and transfer behavior of aryltriazene polymer films with a thickness from 25 nm to ∼400 nm were investigated in order to improve the process control parameters for the fabrication of functional thin-film devices of microdeposited heat- and UV-sensitive materials.     

The forward and inverse problem in tissue optics based on the radiative transfer equation: A brief review

This note serves as an introduction to two papers by Klose et al. [2] and [3] and provides a brief review of the latest developments in optical tomography of scattering tissue. We discuss advancements made in solving the forward model for light propagation based on the radiative transfer equation, in reconstructing scattering and absorption cross sections of tissue, and in molecular imaging of luminescent sources.     

Evaluation of the role of magnetization transfer imaging in prostate: a preliminary study

Results of the preliminary study on the evaluation of the role of magnetization transfer imaging (MTI) of prostate in men who had raised prostate-specific antigen (PSA) (>4 ng/ml) or abnormal digital rectal examination (DRE) are reported. MT ratio (MTR) was calculated for 20 patients from the hyper- (normal) and hypo-intense regions (area suspicious of malignancy as seen on T2-weighted MRI) of the peripheral zone (PZ) and the central gland (CG) at 1.5 T. In addition, MTR was calculated for three healthy controls. Mean MTR was also calculated for the whole of the PZ (including hyper- and hypo-intense area) in all patients. Out of 20 patients, biopsy revealed malignancy in 12 patients. Mean MTR value (8.29+/-3.49) for the whole of the PZ of patients who were positive for malignancy on biopsy was statically higher than that observed for patients who were negative for malignancy (6.18+/-3.15). The mean MTR for the whole of the PZ of controls was 6.18+/-1.63 and is similar to that of patients who were negative for malignancy. Furthermore, for patients who showed hyper- (normal portion) and hypo-intense (region suspicious of malignancy) regions of the PZ, the MTR was statistically significantly different. These preliminary results reveal the potential role of MT imaging in the evaluation of prostate cancer.     

Kinetics of semidilute and dense polymer solution: the time dependence of single-chain dynamics

The single-chain motion of flexible bead polymer chains in solution was investigated taking into account hydrodynamic screening. The Oseen-like tensor was found within the Debye–Bueche–Brinkman effective-medium model, which describes the polymer solution. Two dynamical regimes in time scales were predicted: Zimm-like motion and Rouse-like motion. The time dependence of the hydrodynamic screening length was considered.     

波纹通道换热特性的三维数值研究和场协同分析

应用计算流体力学CFD(Computational Fluid Dynamics)方法,对顺人字组合及软硬板组合波纹通道内三维稳态湍流流场进行了数值模拟,定量计算了不同流动速度和不同结构参数下波纹通道的传热因子j和摩擦系数f,得到了波纹通道换热与流动阻力随波纹夹角β及波纹密度λ/h的变化规律,进而对波纹通道进行了整体性能评价,并从场协同理论角度,分析了波纹通道强化换热的机理。     

Numerical study of the heat transfer and electro-thermo-convective flow patterns in dielectric liquid layer subjected to unipolar injection

In this article we study the electro-thermal convection in a dielectric liquid layer placed between two electrodes and subjected to the simultaneous action of an electric field and a thermal gradient. The full set of equations describing the electro-thermo-convective phenomena is directly solved using a finite volume method. We first heat the liquid from below at time t = 0, wait for the thermal steady state and then inject the electric charges by applying the electric potential. The development of the electro-convective motion is analysed in detail in two cases: 1) strong injection from the lower electrode, 2) strong injection from the upper one. We also study the heat transfer enhancement due to electro-convection. The evolution in time of the Nusselt number Nu for different combinations of the two usual non-dimensional parameters associated to the electro-thermo-convection phenomena (Rayleigh number Ra and the electrical parameter T) is also given and analysed.     

UV laser ablation of intraocular lenses: SEM and AFM microscopy examination of the biomaterial surface

Several new materials and patterns are studied for the formation and etching of intraocular lenses (IOLs), in order to improve their optical properties, to reduce the diffractive aberrations and to decrease the incidence of posterior capsular opacification. The aim of this study is to investigate the use of UV (λ = 266 nm) laser pulses to ablate the intraocular lenses materials, and thus to provide an alternative to conventional surface shaping techniques for IOLs fabrication. Ablation experiments were conducted using various polymer substrates of hydrophobic acrylic IOLs and PMMA IOLs. We investigated the ablation efficiency and the morphology of the ablated area by imaging the surface modification with atomic force microscopy (AFM) and scanning electron microscopy (SEM). The morphological appearance of IOL samples reveals the effect of a photochemical and photothermal ablation mechanism.     

Numerical investigation of laminar flow and heat transfer in a radial flow cooling system with the use of nanofluids

Nanofluids, because of their enhanced heat transfer capability as compared to normal water/glycol/oil based fluids, offer the engineer opportunities for development in areas where high heat transfer, low temperature tolerance and small component size are required. In this present paper, the hydrodynamic and thermal fields of a water–γAl₂O₃ nanofluid in a radial laminar flow cooling system are considered. Results indicate that considerable heat transfer enhancement is possible, even achieving a twofold increase in the case of a 10% nanoparticle volume fraction nanofluid. On the other hand, an increase in wall shear stress is also noticed with an increase in particle volume concentration.     

Laser ablation of energetic polymer solutions: effect of viscosity and fluence on the splashing behavior

Laser plasma thrusters are a new kind of propulsion system for small satellites, and work with the thrust created by the laser ablation of a target. Liquid polymer solutions are very promising fuels for such systems, provided that no splashing of the target occurs, because ejection of droplets strongly decreases the performances of the system. We have investigated the nanosecond infrared laser ablation of glycidyl azide polymer solutions containing carbon nanoparticles as absorber. Shadowgraphy imaging revealed two cases, namely splashing regime and solid-like behavior. The transition between both regimes depends on the viscosity of the solution and on the laser fluence, and is explained by the recoil force acting on the target. Appropriate conditions to avoid splashing were identified, showing that this liquid polymer solution is a suitable fuel for laser plasma thrusters.     

Interaction of the excited state intramolecular proton transfer probe 3-hydroxy-2-naphthoic acid with poly N-vinyl-2-pyrrolidone polymer in water: An insight into the water structure in the binding region

The enhancement of the excited state intramolecular proton transfer (ESIPT) emission of 3-hydroxy-2-naphthoic acid (3HNA) in presence of poly N-vinyl-2-pyrrolidone (PVP) has been investigated by time resolved fluorescence and anisotropy measurement. In other water soluble polymers and monomers there is no enhancement of the ESIPT emission of 3HNA. The microenvironment of the probe in PVP-water mixture is investigated by comparing the ESIPT emission of 3HNA in mixed solvents of acetonitrile-toluene. The anisotropy, rotational correlation time and the blue shift observed in the ESIPT emission in PVP-water mixture have been ascribed to both the polarity and the motional restriction of the probe imposed by the bound water region of PVP.     

A comparative study of the energy migration and energy transfer in highly doped Nd:YAG single crystal

The donor-donor (D-D) energy migration interaction parameter C_DD in high-concentration Nd³⁺-doped YAG laser crystal is estimated, for the first time, by using the Yokota-Tanimoto (Y-T) model and the spectral overlap model (SOM) of Kushida. Firstly, the experimental luminescence decay curves of ⁴F_3/2 state of Nd³⁺ ions in YAG laser crystal at room temperature for 2.0 and 3.0 at% Nd³⁺ concentrations reported by Mao are fitted successfully by using the Y-T model and the parameter C_DD is obtained to be 1.50×10⁻³⁹ cm⁶/s. Secondly, the parameter C_DD is also directly calculated by using the SOM of Kushida: C_DD is calculated to be 2.73×10⁻³⁹ cm⁶/s. By comparing the energy migration interaction parameter C_DD and the donor-acceptor (D-A) energy transfer interaction parameter C_DA (1.794×10⁻⁴⁰ cm⁶/s), it is concluded that energy migration rate between Nd³⁺ ions in YAG laser crystal was about 11 times larger than energy transfer rate, and that energy migration would play a very important role in high-concentration Nd³⁺ -doped YAG laser crystal.     

Fluorescence resonance energy transfer: A promising tool for investigation of the interaction between 1-anthracene sulphonate and serum albumins

This present investigation has revealed that steady state as well as time-resolved fluorescence techniques can serve as highly sensitive monitors for exploring the interaction of fluorescent probe 1-anthracene sulphonate (1-AS) with model transport proteins, bovine serum albumin (BSA) and human serum albumin (HSA).We have focused on fluorescence resonance energy transfer (FRET) between excited tryptophan in transport proteins to 1-AS, for the study of relaxation dynamics of biological molecules.     

Synthesis and characterization of nano-peanuts of lead(II) coordination polymer [Pb(qcnh)(NO3)2]n with ultrasonic assistance: A new precursor for the preparation of pure-phase nano-sized PbO

A sonochemical method was used to synthesize nano-peanuts of a new lead(II) coordination 1D polymer, [Pb(qcnh)(NO₃)₂]_n (1), where qcnh = 2-quinolincarbaldehyde nicotinohydrazide. The compound was characterized by scanning electron microscopy (SEM), elemental analysis, IR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), and single crystal X-ray analysis. The X-ray structure revealed that the Pb(II) atom is coordinated by one oxygen and three nitrogen atoms from two qcnh ligands and five oxygen atoms from three nitrate ligands in an 8 + 1 fashion with a PbN₃O₆ donor set. One of the PdN distances in the vicinity of the central atom is a bit longer (Pb1N1 = 2.939(4) Å), which shows the effect of the 6s² lone electron pair localized within the valence shell of the lead(II) atom. PbO nanoparticles were obtained by thermolysis of 1 at 180 °C with oleic acid as a surfactant. The average diameter of the nanoparticles was estimated by XRD to be 28 nm. The morphology and size of the prepared PbO nanoparticles were further studied using SEM.     

A 13C field-cycling NMR relaxometry investigation of proton tunnelling in the hydrogen bond: dynamic isotope effects, the influence of heteronuclear interactions and coupled relaxation

Concerted double proton transfer in the hydrogen bonds of a carboxylic acid dimer has been studied using 13C field-cycling NMR relaxometry. Heteronuclear 13C-1H dipolar interactions dominate the 13C spin-lattice relaxation which is significantly influenced by the polarisation state of the 1H Zeeman reservoir. The methodology of field-cycling experiments for such heteronuclear spin-coupled systems is studied experimentally and theoretically, including an investigation of various saturation-recovery and polarisation-recovery pulse sequence schemes. A theoretical model of the spin-lattice relaxation of this coupled system is presented which is corroborated by experiment. Spectral density components with frequencies omega(C), omega(C) + omega(H), and omega(C) - omega(H) are mapped out experimentally from the magnetic field dependence of the 13C and 1H spin-lattice relaxation and the proton transfer rate at low temperature is determined from their widths. Any dynamic isotope effect on the proton tunnelling in the hydrogen bond arising from 13C enrichment in the skeletal framework of the dimer is found to be smaller than experimental uncertainties (approximately 5%).