ʯӢ����΢��ƽ��HL-2Aװ���ϵ�Ӧ��

在HL-2A装置上采用石英晶体微天平(QCM)测量碳元素及其化合物的沉积质量,从测量的数据可知,每次等离子体放电后QCM的沉积量都会有细微变化,每次放电测得的沉积质量约为0.1~10μg.沉积量的变化与沉积物质再腐蚀或者溅射有关.根据一天的测量结果,可以计算得出HL-2A装置偏滤器区域平均每次放电(非H模放电)的沉积厚度约为10nm.     

石英晶体微天平在HL-2A装置上的应用

在HL-2A装置上采用石英晶体微天平(QCM)测量碳元素及其化合物的沉积质量,从测量的数据可知,每次等离子体放电后QCM的沉积量都会有细微变化,每次放电测得的沉积质量约为0.1~10μg。沉积量的变化与沉积物质再腐蚀或者溅射有关。根据一天的测量结果,可以计算得出HL-2A装置偏滤器区域平均每次放电(非H模放电)的沉积厚度约为10nm。     

HL-2Aƫ������������ϵͳ������

为了检测HL-2A偏滤器靶板的背后沉积层的沉积情况和深入了解其等离子体与第一壁的相互作用过程,国内首次研制了用于托卡马克装置的偏滤器沉积测量系统,其中包括石英晶体、测量探头、频率测量以及控制系统等.经过初步检测,该沉积系统平均采样速率为13~14s-1;测量的石英晶体共振频率分辨率为0.01Hz;石英晶体共振频率的变化正比于沉积在石英晶体表面的质量的变化,这与Sauerbrey方程的线性关系吻合;实验室检测过程中该沉积系统的平均沉积率约为2.0ng?s-1,显示该沉积系统具有纳克级质量检测能力,表明了该偏滤器沉积系统的测量性能和有效性.     

Ammonia sensing characteristics of ZnO nanowires studied by quartz crystal microbalance

The ZnO nanowires have been prepared and studied as the sensing element for the detection of ammonia. The ZnO nanowires were first synthesized by evaporating high purity zinc pellets at 900 °C and then distributed onto the electrode surfaces of quartz crystals at room temperatures. Gas sensitive properties of ZnO nanowires layer were studied in terms of the quartz crystal microbalance (QCM) at room temperature. It is found that the obtained response of the sensors varied with the thickness of the ZnO nanowires layer. ZnO nanowires showed high sensitivity to ammonia in the range of 40-1000 ppm. The response time of the sensor was as fast as ∼5 s at any concentration (40-1000 ppm) of ammonia gas. The ZnO nanowires-coated sensors have a good frequency stability and reproducibility. All results demonstrated that the ZnO nanowire was a potential gas sensing material for practical use.     

HL-2A偏滤器沉积测量系统的研制

为了检测HL-2A偏滤器靶板的背后沉积层的沉积情况和深入了解其等离子体与第一壁的相互作用过程,国内首次研制了用于托卡马克装置的偏滤器沉积测量系统,其中包括石英晶体、测量探头、频率测量以及控制系统等。经过初步检测,该沉积系统平均采样速率为13~14s^-1;测量的石英晶体共振频率分辨率为0.01Hz;石英晶体共振频率的变化正比于沉积在石英晶体表面的质量的变化,这与Sauerbrey方程的线性关系吻合;实验室检测过程中该沉积系统的平均沉积率约为2.0ng•s^-1,显示该沉积系统具有纳克级质量检测能力,表明了该偏滤器沉积系统的测量性能和有效性。     

An erosion sensor based on a quartz crystal microbalance for quantitative determination of the cleaning efficiency in an ultrasonic vessel

The efficiency of ultrasonic cleaning vessels cannot be measured directly in an easy way. In the presented work, a sensor is developed which quantitatively measures the ablation of a test layer. The sensor element is a quartz crystal which is coated with a sacrificial layer. Small changes in mass of this layer can be measured by a frequency shift of the crystal oscillation. For measurements, a 10 MHz AT-cut quartz crystal was used in a cleaning vessel working at 44.9 kHz. To determine the frequency shift by the ablation of the test layer, the quartz crystal was driven by a frequency generator sweeping the frequency in the range of the resonance frequency and a characteristic frequency was determined. The test layer which was applied to the quartz crystal consisted of silica microparticles suspended in varnish. In a preliminary experiment using a commercial cleaner it could be shown that significant changes in resonance frequency by cavitation effect could be detected. The initial frequency shift of the sacrificial layer is reproducible within 10%. The test layer can be adapted to the conditions of the cleaning vessel. By changing the electrical input power of the vessel, a threshold in the cavitation erosion was found.     

Adsorption behavior of protein onto siloxane microspheres

The siloxane microspheres with core-shell structure (PMMA/PMPS) (MMA, methyl methacrylate; MPS, 3-methacryloxypropyl-trimethoxysilane) have been prepared by dispersion polymerization as described in our previous work. In this paper, the developed poly(MMA-MPS) microspheres, as a carrier, are used to investigate the adsorption behavior of bovine serum albumin (BSA) on them. The Langmuir and Freundlich models have been applied to describe the adsorption behavior. The experimental results indicated that the presence of PMPS evidently increases the adsorption rate and the amount of protein, and it also influences the interaction of BSA molecules. The adsorption of BSA on the poly(MMA-MPS) microspheres seems to be sensitive to pH and ionic strength. The fittings curves from Langmuir and Freundlich models showed that the adsorption was actually more complicated than ideal situation because one or more interactions were involved in the process. For understanding the electronic contribution, the Zeta potential was used to measure the reactive system before and after protein adsorption.     

电场作用下5CB液晶分子的近壁面层黏弹性的QCM研究

利用石英晶体微天平(quartz crystal microbalance,QCM)研究了电场对5CB液晶分子的近壁面层黏弹性的影响.对QCM结果的分析发现,电场作用对液晶的黏度影响分为两部分,通过建立含吸附膜的双层膜模型,分析了QCM的两部分结果,发现电场对近壁面吸附层及体相层的影响是不同的.根据QCM的双层膜模型,对近壁面层液晶分子的黏弹性及膜厚进行了定量的分析计算,结果表明5CB在石英晶体上电极附近有一层约100nm厚的近壁面吸附层,其复剪切黏度随电场强度的增加而减小,这与5CB液晶的体相黏度变化规 关键词： 5CB液晶 石英晶体微天平 近壁面 黏弹性     

Use of quartz crystal nanobalance to study the binding and stabilization of albumin and doxycycline on a thin layer of hydroxyapatite

This study reports the use of quartz crystal nanobalance (QCN) to study the adsorption of two model molecules namely albumin and doxycycline by hydroxyapatite (HA). The work focuses on the deposition of a stable coating of HA on the quartz crystal, modification of the coating using doxycycline and its subsequent effects on albumin adsorption. The uniformity and thickness of the HA coating has been studied using atomic force microscopy (AFM). The functional groups to ascertain the presence of the selected moieties have been characterized by Raman spectroscopy. The results indicate that the mass of albumin deposited on the surface of the HA coated quartz crystal functionalized with doxycycline shows a substantial increase when compared to the standard HA coated quartz crystal. The adsorbed albumin has also been found to be retained for an enhanced period of time. This surface immobilization of doxycycline and subsequent albumin adsorption seem to be a promising approach to confer biomaterials with antithrombogenic and antibacterial surfaces.     

Structural changes during the unfolding of Bovine serum albumin in the presence of urea: A small-angle neutron scattering study

The native form of serum albumin is the most important soluble protein in the body plasma. In order to investigate the structural changes of Bovine serum albumin (BSA) during its unfolding in the presence of urea, a small-angle neutron scattering (SANS) study was performed. The scattering curves of dilute solutions of BSA with different concentrations of urea in D₂O at pH 7.2 ± 0.2 were measured at room temperature. The scattering profile was fitted to a prolate ellipsoidal shape (a, b, b) of the protein witha = 52.2 Å andb = 24.2 Å. The change in the dimensions of the protein as it unfolds was found to be anisotropic. The radius of gyration of the compact form of the protein in solution decreased as the urea concentration was increased.     

Interaction of the flavonoid hesperidin with bovine serum albumin: A fluorescence quenching study

The interaction between the flavonoid hesperidin and bovine serum albumin (BSA) was investigated by fluorescence and UV/Vis absorption spectroscopy. The results revealed that hesperidin caused the fluorescence quenching of BSA through a static quenching procedure. The hydrophobic and electrostatic interactions play a major role in stabilizing the complex. The binding site number n, and apparent binding constant K_A, corresponding thermodynamic parameters ΔG^o, ΔH^o, ΔS^o at different temperatures were calculated. The distance r between donor (BSA) and acceptor (hesperidin) was obtained according to fluorescence resonance energy transfer. The effect of Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, and Mn²⁺ on the binding constants between hesperidin and BSA were studied. The effect of hesperidin on the conformation of BSA was analyzed using synchronous fluorescence spectroscopy and UV/Vis absorption spectroscopy.     

Adsorption of phenylalanine on single crystal rutile TiO2(1 1 0) surface

The adsorption of the aromatic amino acid, phenylalanine on a TiO₂ rutile (1 1 0) single crystal surface has been investigated with photoemission and NEXAFS (near edge X-ray absorption fine structure) spectroscopy. The results indicate initial adsorption via the carboxylate group in a bidentate configuration with the phenyl ring oriented at approximately 25° to the surface normal. The amino group remains as NH₂. Subsequent layers of phenylalanine appear to adsorb as neutral molecules with H-bonding between NH₂ and CO groups.     

A scanning tunneling microscopy study of PH3 adsorption on Si(1 1 1)-7 × 7 surfaces, P-segregation and thermal desorption

PH₃ adsorption on Si(1 1 1)-7 × 7 was studied after various exposures between 0.3 and 60 L at room temperature by means of scanning tunneling microscopy (STM). PH₃-, PH₂-, H-reacted, and unreacted adatoms can be identified by analyzing empty-state STM images at different sample biases. PH_x-reacted rest-atoms can be observed in empty-state STM images if neighboring adatoms are hydrogen terminated. Most of the PH₃ adsorbs dissociatively on the surface, generating H- and PH₂-adsorbed rest-atom and adatom sites. Dangling-bonds at rest-atom sites are more reactive than adatom sites and the faulted half of the 7 × 7 unit cell is more reactive than the unfaulted half. Center adatoms are overwhelmingly preferred over corner adatoms for PH₂ adsorption. The saturation P coverage is ∼0.18 ML. Annealing of PH₃-reacted 7 × 7 surfaces at 900 K generates disordered, partially P-covered surfaces, but dosing PH₃ at 900 K forms P/Si(1 1 1)- surfaces. Si deposition at 510 K leaves disordered clusters on the surface, which cannot be reordered by annealing up to 800 K. However, annealing above 900 K recreates P/Si(1 1 1)- surfaces. Surface morphologies formed by sequential rapid thermal annealing are also presented.     

Adsorption of NO on unreduced and reduced CeO2 surfaces: A plane-wave DFT study

The adsorption of NO on the (1 1 1) and (1 1 0) surfaces of ceria (CeO₂) was studied using projector-augmented wave (PAW) method based density-functional theory within the generalized gradient approximation (GGA). Several adsorption sites for NO on the stoichiometric surfaces are found, all with weak molecule-surface interaction. The adsorption on the reduced surfaces is much stronger. The O-ends of the adsorbed NO molecules fill the oxygen vacancies and the N-O bonds are elongated. If two such adsorbed NO molecules, residing at neighbouring sites, meet, their N-ends will form a strong N-N bond with little or no barrier. This is an intermediate step towards dissociation of free N₂ which is calculated to be strongly thermodynamically driven.     

Adsorption of gas-phase oxygen atoms on Pt(1 0 0)-hex-R0.7°: Evidence of a metastable chemisorbed phase

We utilized temperature programmed desorption (TPD) and low energy electron diffraction (LEED) to study the chemisorption of gas-phase oxygen atoms on Pt(1 0 0)-hex-R0.7° at 450 K and 573 K, and find that the types and relative populations of oxygen phases that develop are highly dependent on the surface temperature during adsorption. At both temperatures, oxygen atoms initially adsorb on defects associated with the surface reconstruction. Increasing the coverage to about 0.32 ML (monolayers) at 573 K causes deconstruction and population of a phase with apparent (3 × 1) symmetry that desorbs in a single feature centered at about 672 K. Saturating at 0.63 ML leads to the formation of an additional “complex” ordered phase that desorbs in a sharp feature exhibiting autocatalytic behavior as it shifts from approximately 631 K to 642 K. Uptake at 450 K also initiates deconstruction, but in this case two desorption maxima at about 652 K and 672 K grow simultaneously with increasing coverage to about 0.32 ML. The feature at 672 K is associated with the disordered (3 × 1) phase, while the feature at 652 K has not been previously reported. We attribute this new feature to desorption from disordered arrangements of high oxygen concentrations on (1 × 1) surface regions. As the coverage increases to about 0.51 ML, small amounts of the complex phase grow, while this “high-concentration” (1 × 1) and the (3 × 1) phases continue to develop. We conclude that the complex phase is energetically preferred over the high-concentration (1 × 1) phase, but kinetic barriers hinder its formation at 450 K, causing oxygen to become trapped in the high-concentration (1 × 1) phase. Therefore, the high-concentration (1 × 1) phase is metastable relative to the complex phase. Lastly, above about 0.51 ML, further adsorption at 450 K promotes the growth of Pt oxide islands as detailed in a future investigation.     

Adsorption and diffusion of H2O molecule on the Be(0001) surface: A density-functional theory study

Using first-principles calculations, we systematically study the adsorption behavior of a single molecular H₂O on the Be(0001) surface. We find that the favored molecular adsorption site is the top site with an adsorption energy of about 0.3 eV, together with the detailed electronic structure analysis, suggesting a weak binding strength of the H₂O/Be(0001) surface. The adsorption interaction is mainly contributed by the overlapping between the s and pz states of the top-layer Be atom and the molecular orbitals 1b₁ and 3a₁ of H₂O. The activation energy for H₂O diffusion on the surface is about 0.3 eV. Meanwhile, our study indicates that no dissociation state exists for the H₂O/Be(0001) surface.     

Adsorption of SO2 molecule on doped (8, 0) boron nitride nanotube: A first-principles study

Adsorptions of SO₂ on Al-, Ca-, Co-, Cu-, Ge-, Ni-, and Si-doped (8, 0) boron nitride nanotube (BNNT) have been studied using first-principles approach based on density functional theory in order to exploit their potential applications as SO₂ gas sensors. The electronic properties of the BNNT-molecule adsorption adducts are strongly dependent on the dopants. The most stable adsorption geometries, adsorption energies, charge transfers, and density of states of these systems are thoroughly discussed. This work reveals that the sensitivity of (8, 0) BNNT based chemical gas sensors for SO₂ can be drastically improved by introducing appropriate dopant. Si is found to be the best choice among all the dopants.     

Adsorption of O2 on the CaO and SrO (1 0 0) surfaces: A first-principles study

First-principles calculations based on density functional theory (DFT) have been performed to investigate the adsorption of O₂ on the CaO and SrO (1 0 0) surfaces. The present results indicate that the bridge-top site for both the CaO and SrO (1 0 0) surfaces is the most favorable site for O₂ adsorption, with predicted adsorption energies of 1.437 eV and 1.236 eV, respectively. Detailed analysis of density of states, Mullikan population and vibration frequency are performed. The calculated results imply the possible formation of a peroxo (O₂²⁻) when O₂ is adsorbed with the bridge-top mode on both CaO and SrO (1 0 0) surfaces.