对苯二甲酸二丙炔醇酯与Co2(CO)8、Mo2Cp2(CO)4和RuCo2(CO)11的反应

室温下对苯二甲酸二丙炔醇酯分别与Co2CO8Mo2Cp2CO4和RuCo2CO11反应得到三个有机金属化合物C6H4pCO2CH2C2Hμ2Co2CO621、C6H4pCO2CH2C2H2RuCo2CO922和HC2CH2OCOC6H4pCO2CH2C2HμMo2Cp2CO43。研究发现三种金属核对端炔氢的屏蔽作用依次为RuCo2CO9>Co2CO6>Mo2CO4Cp2。化合物1的晶体衍射发现属三斜晶系空间群a=8.1392b=8.8083c=11.3433β=96.2606°V=773.443Z=1Dc=1.748g·cm-3R=0.0513wR=0.1266。     

Formation of the silylene-bridged complex Fe2(CO)6(μ2-SiCl2)3 from cis-Fe(CO)4(SiCl3)2: an experimental and computational study

Abstract  

Thermolysis of cis-Fe(CO)₄(SiCl₃)₂ results in the formation of the novel compound Fe₂(CO)₆(μ₂-SiCl₂)₃, which was characterized by single crystal X-ray diffraction. Density functional theory calculations were carried out to elucidate possible reaction steps leading to the formation of Fe₂(CO)₆(SiCl₂)₃, including CO dissociation and chlorine abstraction by a SiCl₃ radical generated from homolytic Fe–Si bond cleavage involving a singlet–triplet intersystem crossing.     

Unsaturation in binuclear cyclopentadienylchromium carbonyl thiocarbonyls: Viability of (η-C5H5)2Cr2(CS)2(CO)3 in contrast to (η-C5H5)2Cr2(CO)5

The cyclopentadienylchromium carbonyl thiocarbonyls Cp₂Cr₂(CS)₂(CO)_n (n = 4, 3, 2, 1) have been studied by density functional theory using the B3LYP and BP86 functionals. The lowest energy Cp₂Cr₂(CS)₂(CO)₄ structure can be derived from the experimentally characterized unbridged Cp₂Cr₂(CO)₆ structure by replacing the two terminal carbonyl groups furthest from the Cr-Cr bond with two terminal CS groups. The two lowest energy Cp₂Cr₂(CS)₂(CO)₃ structures have a single four-electron donor η²-μ-CS group and a formal Cr-Cr single bond of length ∼3.1 Å. In contrast to the carbonyl analogue Cp₂Cr₂(CO)₅ these Cp₂Cr₂(CS)₂(CO)₃ structures are viable with respect to disproportionation into Cp₂Cr₂(CS)₂(CO)₄ and Cp₂Cr₂(CS)₂(CO)₂ and thus are promising synthetic targets. The lowest energy Cp₂Cr₂(CS)₂(CO)₂ structures have all two-electron donor CO and CS groups and short CrCr distances around ∼2.3 Å suggesting the formal triple bonds required to give the chromium atoms the favored 18-electron configurations. These Cp₂Cr₂(CS)₂(CO)₂ structures are closely related to the known structure for Cp₂Cr₂(CO)₄. In addition, several doubly bridged structures with four-electron donor η²-μ-CS bridges are found for Cp₂Cr₂(CS)₂(CO)₂ at higher energies. The global minimum Cp₂Cr₂(CS)₂(CO) structure is a triply bridged triplet with a CrCr triple bond (2.299 Å by BP86). A higher energy singlet Cp₂Cr₂(CS)₂(CO) structure has a shorter Cr-Cr distance of 2.197 Å (BP86) suggesting the formal quadruple bond required to give each chromium atom the favored 18-electron configuration.     

[COH(NH2)2]2[Cu(pic)2(ClO4)2]的合成与晶体结构

The title compound was synthesized by reaction of Cu(ClO₄)₂， picolinic acid and carbamide in C₂H₅OH/CH₃CN solution， and characterized by single-crystal X-ray diffraction. It crystallizes in the orthorhombic system， space group Pbca with a=14.0481(8)， b=9.0130(5)， c=18.626(1)?， V=2358.3(2)?³， Z=4， D_x=1.771g·cm^-3， μ=1.235mm^-1 and F(000)=1276. The final R factor is 0.0440 for 1434 observed reflections. The X-ray analysis revealed that the copper(Ⅱ) atom is coordinated by two picolinic ligands in the equatorial plane， while the two oxygen atoms of perchlorate occupy the axial positions of octahedron with lengthened Cu-O distances， resulting in a 4+2 elongated octahedral environment. In the compound， there also exist two protonated carbamide cations for charge balance. CCDC： 195354.     

Synthesis and molecular structure of [((CO)3RuBr2)2(μ-SePh)2Ru(CO)4] cluster with a Ru3Se2 chain core

Treatment of ruthenium carbonyl, [Ru₃(CO)₁₂] with phenylseleno tribromide PhSeBr₃ afforded a new triruthenium cluster, [(CO)₁₀Br₄Ru₃(μ-SePh)₂] (1). Its molecular structure was determined by single crystal XRD method (P2₁/c; a = 10.514(3) Å; b = 10.814(3) Å; c = 19.063(5) Å; β = 105.064(4)°; V = 2093.1(10) Å³) and shown to have two lateral Ru(CO)₃Br₂ units attached via two PhSe bridges to a Ru(CO)₄ center forming a chain-like Ru-Se-Ru-Se-Ru cluster core. This is in contrast with a recently reported reaction of PhTeBr₃ with [Ru₃(CO)₁₂] which formed a monomeric complex of ruthenium-dicarbonyl-dibromo fragment coordinating two PhTeBr ligands, [(CO)₂RuBr₂(PhTeBr)₂].     

Co(NO3)2-(CH3)2SO-H2O system at 25°C

The solubilities and nature of solid phases in the Co(NO₃)₂-(CH₃)₂SO-H₂O system were studied at 25°C. A new congruently saturating compound was recovered: Co(NO₃)₂ · 4(CH₃)₂SO · 2H₂O. The concentration boundaries of its crystallization in the system were determined. The compound was studied by the Schreinemakers wet residue method, X-ray powder diffraction, differential thermal analysis, crystal-optical analysis, and IR spectroscopy.     

Ru2(CO)4{OOC(CH2)nCH3}2L2 sawhorse-type complexes containing μ2-η2-carboxylato ligands derived from saturated fatty acids

The thermal reaction of Ru₃(CO)₁₂ with the saturated fatty acids (heptanoic, nonanoic, decanoic, tridecanoic, tetradecanoic, heptadecanoic, octadecanoic) in refluxing tetrahydrofuran, followed by addition of triphenylphosphine (PPh₃) or pyridine (C₅H₅N), gives the dinuclear complexes Ru₂(CO)₄{OOC(CH₂) _n CH₃}₂L₂ (1: n = 5, 2: n = 7, 3: n = 8, 4: n = 11, 5: n = 12, 6: n = 15, 7: n = 16; a: L = NC₅H₅, b: L = PPh₃). The single crystal structure analysis of 1b, 2a, 3a, 4a and 5a reveals a dinuclear Ru₂(CO)₄ sawhorse structure, the diruthenium backbone being bridged by the carboxylato ligands, while the two L ligands occupy the axial positions at the ruthenium atoms. In 2a, π-π stacking interactions between adjacent pyridyl units of symmetry related molecules prevail, while in the longer alkyl chain derivatives 3a, 4a and 5a, additional van der Waals and electrostatic interactions between the alkyl chains take place as well in the packing arrangement of the molecules, thus giving rise to layers of parallel alkyl chains in the crystal.     

2-巯甲基噻吩与[Mn2(CO)10]原子簇化合物反应生成[MnS(CO)3]4及结构表征(英)

The compound [Mn₂(CO)₁₀] reacts with 2-(Methylthio)thiophene (C₅H₆S₂) while refluxing in xylene to afford a methylthio-tetramanganese product [MnS(CO)₃]₄, in which C₅H₆S₂ is cleaved with loss of thiophene. The crystal structure of [MnS(CO)₃]₄ has been studied by direct method. Based on the 21 685 unique reflections collected using MoKα of X-ray radiation and a CCD-based detector, it is refined to an agreement index (R₁) of 0.079 0. The cell is triclinic with dimensions: a=1.719 49 nm, b=1.959 2 nm, c=2.632 6 nm and α=79.733°, β=71.407°, γ=89.387°. There are 12 unit cells of [MnS(CO)₃]₄ in the cell, with space group P1.     

Synthesis and X-ray investigation of novel Fe and Mn phenyltellurenyl-halide complexes: (CO)3FeBr2(PhTeBr), (η-C5H5)Fe(CO)2(PhTeI2) and CpMn(CO)2(PhTeI)

New complexes of transition metals with organotellurium halide ligands are reported. Iodination of [CpMn(CO)₂]₂(μ-Ph₂Te₂) leads to the Te-Te bond cleavage and formation of CpMn(CO)₂(PhTeI). Oxidative addition of PhTeBr₃ to Fe(CO)₅ gives the monomeric complex (CO)₃FeBr₂(PhTeBr) which is isostructural with the recently reported (CO)₃FeI₂(PhTeI). Insertion of phenyltellurenyl iodide (PhTeI) into the Fe-I bond of CpFe(CO)₂I forms CpFe(CO)₂(TeI₂Ph). Molecular structures of the reported complexes were determined by single-crystal X-ray diffraction analysis (XRD). A considerable shortening of metal-tellurium distances is observed.     

Phenyltellurenyl halide complexes of ruthenium and rhenium (CO)2RuBr2(PhTeBr)2 and (CO)3Re(PhTeI)3(μ3-I): Synthesis and crystal and molecular structures

Reactions of Ru₃(CO)₁₂ with PhTeBr₃ and of Re(CO)₅Cl with PhTeI in benzene give the stable complexes (CO)₂RuBr₂(PhTeBr)₂ (I) and (CO)₃Re(PhTeI)₃(μ³-I) (II) containing two and three ligands PhTeX (X = Br or I), respectively. The bonds between these ligands and the central metal atom are fairly shortened (on average, Ru-Te, 2.608 ?; Re-Te, 2.7554(12)-2.7634(13) ?). The Te-X bonds in the ligands PhTeBr (2.5163(5) ?) and PhTeI (2.7893(15) ?) are not lengthened appreciably. In complex II, the iodide anion is not coordinated by rhenium, yet being attached through weak secondary bonds to three Te atoms of the three ligands PhTeI.     

Reactions of Ru3(CO)12 with 2-pentynal-diethyl-acetal. The crystal structure of Ru2(CO)6[μ-η-{EtC2C(H)(OEt)2}CO{EtC2C(H)(OEt)2}] and its reactivity towards tetraethyl-orthosilicate

The title compound has been obtained in considerable yield by reacting Ru₃(CO)₁₂ with 2-pentynal-diethyl-acetal [CH₃CH₂CCC(H)(OEt)₂] (PDA) in hydrocarbon solvents. The X-ray analysis shows that the title complex belongs to the well known family of the flyover derivatives. Some X-ray structural studies have been reported, many years ago, on di-iron flyover complexes; in contrast only a few examples of diruthenium derivatives have been structurally characterized.The complex contains ethoxy-groups which could potentially undergo hydrolysis in the presence of tetraethyl-orthosilicate (TEOS) in the presence of catalysts. Reactions of complex Ru₂(CO)₆[μ-η⁴-{EtC₂C(H)(OEt)₂}CO{EtC₂C(H)(OEt)₂}] with TEOS in the presence of HCl or of NaF (as catalysts) have been attempted. An inorganic-organometallic sol-gel material containing the skeleton of the complex has been obtained and characterized with IR-Raman, XRD on powders and SEM microscopy.     

Nitrosyl derivatives of the unsaturated dihydrides [Mn2(μ-H)2(CO)6(μ-L2)] (L2 = Ph2PCH2PPh2, (EtO)2POP(OEt)2)

The title dimanganese complexes react with NO (5% in N₂) at room temperature to give as major products the corresponding hexanitrosyl derivatives [Mn₂(NO)₆(μ-L₂)] in moderate yields, and they react rapidly with NO₂ to give the corresponding hydride derivatives [Mn₂(μ-H)(μ-NO₂)(CO)₆(μ-L₂)], these having a nitrite ligand bridging the dimetal centre through the N and O atoms. The dppm-bridged dihydride also reacts selectively at 273 K with (PPN)NO₂ to give first the nitro derivative (PPN)[Mn₂(μ-H)(H)(NO₂)(CO)₆(μ-dppm)], which then transforms into the nitrosyl complex (PPN)[Mn₂(μ-CO)(CO)₅(NO)(μ-dppm)] at room temperature or above (dppm = Ph₂PCH₂PPh₂; PPN⁺ = [N(PPh₃)₂]⁺). The latter anion reacts with (NH₄)PF₆ to give the hydride-bridged nitrosyl complex [Mn₂(μ-H)(μ-NO)(CO)₆(μ-dppm)] and with [AuCl(PPh₃)] to give the trinuclear cluster [AuMn₂(μ-NO)(CO)₆(μ-dppm)(PPh₃)] (Mn-Au = ca. 2.68 Å; Mn-Mn = 2.879(2) Å). Both products are derived from the addition of the added electrophile at the intermetallic bond and rearrangement of the nitrosyl ligand into a bridging position. In contrast, methylation of the anion with CF₃SO₃Me takes place at the nitrosyl ligand to yield the unstable methoxylimide derivative [Mn₂(μ-NOMe)(CO)₆(μ-dppm)]. Analogous reactions at the nitrosyl ligand take place upon the addition of HBF₄·OEt₂ to the nitrosyl-bridged hydrides [Mn₂(μ-H)(μ-NO)(CO)_n(μ-dppm)_m] (n = 6, m = 1; n = 4, m = 2) to give the corresponding hydroxylimide derivatives [Mn₂(μ-H)(μ-NOH)(CO)_n(μ-dppm)_m]BF₄, which were also thermally unstable and could not be isolated nor fully characterized.     

Synthesis and structures of Cs4[(UO2)2(C2O4)(SO4)2(NCS)2] · 4H2O and (NH4)4[(UO2)2(C2O4)(SO4)2(NCS)2] · 6H2O

Single crystals of Cs₄[(UO₂)₂(C₂O₄)(SO₄)₂(NCS)₂] · 4H₂O (I) and (NH₄)₄[(UO₂)₂(C₂O₄)(SO₄)₂(NCS)₂] · 6H₂O (II) have been synthesized and studied by X-ray diffraction. The crystals of both compounds are orthorhombic with the space group Pbam, Z = 2, and unit cell parameters a = 12.0177(3) ?, b = 18.6182(5) ?, c = 6.7573(10) ?, R = 0.0376 (I); a = 11.6539(9) ?, b = 18.3791(13) ?, c = 6.7216(5) ?, R = 0.0179 (II). The main structural units of crystals I and II are [(UO₂)₂(C₂O₄)(SO₄)₂(NCS)₂]⁴⁻ chains belonging to the crystal-chemical group A₂K⁰²B₂²M₂¹ (A = UO₂²⁺, K⁰² = C₂O₄²⁻, B² = SO₄²⁻, M¹ = NCS⁻) of the uranyl complexes. The uranium-containing chains are joined into a three-dimensional framework due to a system of electrostatic interactions with the cesium or ammonium ions in the structure of I. In the structure of II, this framework is additionally stabilized by hydrogen bonds involving the outer-sphere water molecules and ammonium ions. Original Russian Text ? I.V. Medrish, A.V. Virovets, E.V. Peresypkina, L.B. Serezhkina, 2008, published in Zhurnal Neorganicheskoi Khimii, 2008, Vol. 53, No. 7, pp. 1115–1120.     

Synthesis and crystal structure of new one-dimensional copper(II) complex [Cu4(En)2(μ1,1-N3)4(μ1,1,1-N3)2(μ1,3-N3)2]n

A new polymer azido-bridged copper(II) complex [Cu₄(En)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂(μ_1,3-N₃)₂] _n (I) (En = ethylenediamine) has been synthesized and crystallography characterized. Complex I shows one-dimensional coordination polymeric structure based on a tetranuclear cluster unit [Cu₄(En)₂(μ_1,1-N₃)₄(μ_1,1,1-N₃)₂(μ_1,3-N₃)₂], in which the azido ions display three different bridging modes.     

The reaction of Ru3(CO)12 with 1,4-dichloro-but-2-yne in basic methanolic solution. Synthesis and crystal structure of (μ-H)2Ru3(CO)9{μ3-η-[H2CC(H)CCC(O)OCH3]}

The title complex is obtained by reacting Ru₃(CO)₁₂ with 1,4-dichloro-but-2-yne (ClCH₂CCCH₂Cl, DCB) in CH₃OH/KOH solution (followed by acidification with HCl). The X-ray structure analysis shows that (μ-H)₂Ru₃(CO)₉{μ₃-η²-[H₂CC(H)CCC(O)OCH₃]} complex contains a “parallel” ene-yne acetyl substituent, H₂CC(H)CCC(O)OCH₃; the formation of such a ligand starting from DCB is - to our knowledge - unprecedented. The synthesis of complex (μ-H)₂Ru₃(CO)₉{μ₃-η²-[H₂CC(H)CCC(O)OCH₃]} occurs through the activation of CO and methanol. This process has been found for other reactions of functionalized alkynes with M₃(CO)₁₂ carbonyls (M = Fe, Ru) under basic methanolic conditions.The known hydridic cluster, (μ-H)Ru₃(CO)₉[μ₃-η³-(MeCCHCH)] has been identified as the minor reaction product.     

Stepwise addition of CuBr at [(dtc)2Mo2(S)2(μ-S)2] (dtc=diethyldithiocarbamate): syntheses and crystal structures of two Mo/Cu/S clusters [(dtc)2Mo2(μ3-S)(μ-S)3(CuBr)] and [(dtc)2Mo2(μ3-S)4(CuBr)2]

Reactions of [(dtc)₂Mo₂(S)₂(μ-S)₂] with one or two equivalents of CuBr in CH₂Cl₂ afforded two new heterobimetallic sulfide clusters, [(dtc)₂Mo₂(μ₃-S)(μ-S)₃(CuBr)] (1) and [(dtc)₂Mo₂(μ₃-S)₄(CuBr)₂] (2). Both compounds were characterized by elemental analysis, IR, UV-vis and X-ray analysis. Compound 1 contains a butterfly-shaped Mo₂S₄Cu core in which one CuBr unit is coordinated by one bridging S and two terminal S atoms of the [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety. In the structure of 2, one [(dtc)₂Mo₂(S)₂(μ-S)₂] moiety and two CuBr units are held together by six Cu-μ₃-S bonds, forming a cubane-like Mo₂S₄Cu₂ core.     

A comparison between the reaction of P2Ph4 with [{Co2(CO)6}2(μ-η:μ-η-HOCH2CCCCCH2OH)] and the reaction of [Co2(μ-PPh2)2(CO)6] with HOCH2CCCCCH2OH

Reaction of P₂Ph₄ with the diyne-diol complex [{Co₂(CO)₆}₂(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] in toluene at 65 °C gives [{Co₂(μ-P₂Ph₄)(CO)₄}{Co₂(CO)₆}(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)] (1). Thermolysis of 1 at 95 °C leads to [{Co₂(CO)₅}₂(μ-P₂Ph₄)(μ-η²:μ-η²-HOCH₂CCCCCH₂OH)](2) and (μ₂-PPh₂)(μ₂-CO)(CO)₇] (3). The structures of 1-3 have been established by X-ray crystallography. In 1, a pseudoequatorial P₂Ph₄ ligand bridges the cobalt-cobalt bond of a Co₂(CC)(CO)₄ unit. By contrast, in isomeric 2, a pseudoaxial P₂Ph₄ ligand spans two Co₂(CC)(CO)₅ units, a new coordination mode for [{Co₂(CO)₅L}₂(μ-η²:μ-η²-diyne)] complexes. Complex 3 arises from dehydration-cyclocarbonylation of the diyne-diol in 1 to give a 2(5H)-furanone, a process that has not been previously reported. Reaction of HOCH₂CCCCCH₂OH with [Co₂(μ-PPh₂)₂(CO)₆] at 80 °C in toluene gave [Co₃(μ-PPh₂)₃(CO)₆], [Co₂(CO)₆(μ-η²-HOCH₂CCCCCH₂OH)] and [Co₂{μ-η⁴-PPh₂C(CCCH₂OH)C(CH₂OH)CO}(μ-PPh₂)(CO)₄] (4). The regiochemistry of 4 was confirmed by X-ray crystallography.     

Fe(CO)5 promoted C-S bond activation and formation of an unusual C2S3 ligand in [{Fe2(CO)6}2(μ-C2S3)]

Photolysis of a hexane solution containing Fe(CO)₅ and CS₂ leads to desulfurization and formation of a novel cluster [{Fe₂(CO)₆}₂(μ-C₂S₃)] (1). Its molecular structure was determined by single crystal X-ray diffraction methods and shown to consist of two distinct Fe₂(CO)₆ units linked by an unusual C₂S₃ unit.     

Synthesis,structure characterization and thermal properties of [Zr6(μ3-O)4(μ3-OH)4(OOCCH2Bu)9(μ2-OH)3]2

Oxo/hydoxo zirconium(IV) complex of the general formula [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉(μ₂-OH)₃]₂ has been isolated, when Zr(OⁱPr)₄ reacted with a 2-fold excess of 3,3-dimethylbutyric acid. Single crystal X-ray diffraction data, collected at 103 and 153 K, showed that the studied compound crystallizes in hexagonal system (P6₃/m (no. 176)). Structure consists of dimers composed of [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉] sub-units, linked by six μ₂-OH bridges. Infrared spectroscopic studies proved the presence of hydroxo groups in the structure of studied clusters and formation of different types of oxo/hydroxo bridges. The application of variable temperature infrared spectroscopy and differential scanning calorimetry revealed that the structure of this complex undergoes the phase transitions at 143–183 and 203–293 K. Comparison of spectral and crystallographic data suggests that these phase transitions might be related to changes in the strength of Zr–O bonds of μ₂-OH bridges linking complex sub-units, and change in symmetry of the crystal lattice (from hexagonal to trigonal). Analysis of thermogravimetric data showed that decomposition of [Zr₆(μ₃-O)₄(μ₃-OH)₄(OOCCH₂^tBu)₉(μ₂-OH)₃]₂ proceeds with complete conversion to ZrO₂ (monoclinic form) between 603 and 803 K.