RETARDATION OF ULTRAVIOLET LIGHT ACCELERATED LEAF SENESCENCE BY A CYTOKININ: N6 BENZYLADENINE

O ne clear evidence of u.v. injury is the manifestation of chlorosis after leaf irradiation, and such chlorosis can be photorepaired by blue light[1]. We found that such u.v.-accelerated chlorosis could be prevented in the dark by applying N⁶ benzyladenine (BA), a synthetic cytokinin, either before or after u.v. irradiation. Cytokinins are known to retard natural senescence of detached leaves kept in the dark [2]. The present finding suggests that u.v. damage may accelerate the natural senescence process of detached leaves kept in the dark. N. glutinosa leaves were used in this experiment, because chlorosis develops quickly (within one week) when the mature leaves are detached and incubated in the dark. The plants were grown in a glasshouse without white-wash. The light intensity at noon often reached 9000 ft-c., and the temperature ranged from 19–35°C. The leaves shown in Fig. 1 were from mature plants, i.e. plants with the terminal growing point developed into a flower bud. The floral buds were cut off several days before the leaves were detached for exposure to u.v. light.     

Measurement of sugars using the laser spray technique with a gold capillary

A gold (Au) capillary has higher thermal conductivity than a stainless steel capillary and can withstand capillary over-heating induced by high CO(2) laser irradiation (over 2.5 W) better than a stainless steel capillary. For this study, a laser spray using an Au capillary was applied for the detection of sugars. The signal of cationized compounds [M+Na](+) can be detected with higher sensitivity than with conventional laser sprays using high laser power (over 2.7 W). Using 3.5 W of laser power, the signal intensity is 15 times higher than the maximum value with stainless steel (2.3 W) in a 10(-5) M maltose aqueous solution. It is considered that almost all the water molecules evaporate by laser irradiation, which is impossible to achieve using a stainless steel capillary.     

Utility of membrane preconcentration-capillary electrophoresis-mass spectrometry in overcoming limited sample loading for analysis of biologically derived drug metabolites, peptides, and proteins

The limited loading of capillary electrophoresis (CE) leads to relatively poor concentration limits of detection. In this work a unique method for analyte preconcentration with capillary electrophoresis-mass spectrometry (CE-MS) is described. A cartridge containing an impregnated membrane is installed at the inlet of the CE capillary, and we term this approach membrane preconcentration capillary electrophoresis-mass spectrometry (mPC-CE-MS). The analysis of in vivo derived metabolites, peptides, and proteins is described showing the wide applicability of the technology in the analysis of numerous compound classes ranging in molecular weight from 200–60,000 u. In particular, we describe the direct mPC-CE-MS analysis of urine obtained from a patient receiving the neuroleptic drug haloperidol. Three metabolites were found in the urine, and two of them are implicated in the Parkinsonian-like side effects caused by taking this drug. The technique is also applied to the analysis of major histocompatibility complex class I peptides obtained from EG-7 cells. Furthermore, the clinical potential of this approach is described by the direct analysis of urine from a patient suffering from multiple myeloma, as well as aqueous humor derived from a patient undergoing surgery. Finally we show that the use of mPC-ME-MS in conjunction with either analyte stacking (small organic molecules such as metabolites) or moving-boundary transient isotachophoresis (peptides and proteins) after analytes have been eluted from the adsorptive membrane affords optimal performance and no compromise in CE mass spectrometry performance.     

The effect of ultraviolet light on RNA metabolism in bromouracil deoxyriboside-grown HeLa cells

Abstract— The presence of 5-bromouracil deoxyriboside (BrUdR) in the DNA of HeLa cells has profound effects on RNA metabolism after u.v. irradiation. In normally grown cells 200 ergs/mm² depresses RNA synthesis by about 30 per cent while in BrUdR-grown cells the same exposure to u.v. depresses RNA synthesis by 95 per cent. When BrUdR-grown cells are u.v. -irradiated after being labeled with ³H-uridine, the normal autoradiographic pattern, where label shifts from nucleus to cytoplasm, fails to occur. Also, in lieu of the increase in RNA specific activity that is observed in unirradiated cells for a few hours after 20-min pulse-labeling, there occurs a constant decrease in specific activity after the irradiation.     

Investigation on thermal-neutron sensitivity of commercial BeO(Na) thermoluminescence dosimeter and development of thermal-neutron insensitive BeO(Na) phosphors encapsulated in quartz-capillary

BeO(Na) TLD on the market, UD-170 L, gives thermoluminescence response equivalent to irradiation with 3.2 +/- 0.5 cGy of 60Co gamma-rays after irradiation with 10(10) thermal neutrons per cm2. Because of this neutron sensitivity, UD-170 L is not suitable for measurement of gamma-rays in gamma-neutron mixed radiation from a nuclear reactor of Kinki University when we use it for radiobiological research. To reduce this troublesome sensitivity, we replaced the glass capillary used for UD-170 L with a quartz capillary. Quartz tube encapsulated BeO(Na) showed a markedly reduced response to thermal neutrons.     

EFFECTS OF DOSE FRACTIONATION ON ULTRAVIOLET SURVIVAL OF ESCHERICHIA COLI

Abstract— Exposure of E. coli B/r and B at low average dose rates of u.v. radiation (2537 Å), produced either by fractionated doses or by continuous irradiation at a very low dose rate (80 ergs/mm²/hr), results in much increased survival compared to single exposure at high dose rate. This increase is attributed to repair taking place during the irradiation period. The effect is small in the repair-deficient strains E. coli B_8-1_, and C syn- , and is absent in phage T1 and T4, which cannot undergo repair in the extracellular state. However, the prolonged time available for repair in these experiments accounts for only a very minor part of the increase in survival. The principal factor apparently is that the number of lesions present at any time remains relatively low. Presumably complete repair, not only the excision step, can occur in buffer during the irradiation period. This interpretation is supported by experiments in which cells were exposed to combinations of highly fractionated irradiation and single-dose irradiation. We therefore propose that mutual interference in repair, possibly by overlapping of repair regions in complementary DNA strands, reduces considerably the repair efficiency if many lesions are present. This hypothesis explains the 'shouldered' survival curves of B/r and possibly other E. coli strains as due to decreasing repair efficiency with increasing u.v. dose     

Detection limits and precisions in various irradiation and counting regimes

The widespread introduction of rapid pneumatic sample transfer systems has enabled instrumental neutron activation analysis to be based on an increasing number of very short-lived activities. Furthermore, these transfer systems have been interfaced to computer-based MCA's so that the experimenter has complete control over irradiation, decay and counting times, as well as being able to arrange the automatic transfer of numbers of samples between the various stations. Thus the analyst now has a series of options available to him to make the best use of time and facilities. Based on the requirements of detection limits and precisions, he will choose between various irradiation and counting régimes (a) single i.e. conventional (b) cyclic and (c) repeated; or he may choose to replicate the sample a number of times. This paper examines how detection limits and precisions are affected by the above options. By considering a specific isotope, being detected in backgrounds of different half-lives, it is possible to calculate signal-to-noise ratios in each of these cases, and hence compare these régimes from this aspect. Based on calculations for the isotope^77mSe (17.5 s), which is now being widely accepted as the basis for selenium analysis, it is shown that, if a low detection limit is the prime consideration, then replicating samples is the procedure of choice; however, if commercial considerations of sample throughput are important then a pseudocyclic régime would provide the best compromise.     

Determination of organic contaminants in food by capillary electrophoresis

This review addresses recent advances in the analysis of organic contaminants, such as antibiotics, pesticides, biological toxins, and food-borne pathogens, in foods by capillary electrophoresis (CE). Special attention is paid to those aspects that increase sensitivity and/or selectivity, such as sample extraction and concentration, on-line preconcentration techniques (stacking), affinity capillaries or/and specific detectors (laser induced fluorescence (LIF), mass spectrometry (MS)). The various CE modes used to separate the compounds and the quantification strategies are also examined. As a result, this work presents an updated overview on the principal applications of CE, together with a discussion of their main advantages and drawbacks, and an outline of future trends in the analysis of organic contaminants in food.     

O-Alkylation of Bioactive Phthalimide Derivatives Under Microwave Irradiation in Dry Media

In this paper we describe the synthesis of a new series of substituted 2-(4-alkoxy or 4-acyloxyphenethyl)-phthalimide derivatives (4--11). in good yields (58--87%), exploring the remarkable fast O-alkylation or O-acylation of 2-(4-hydroxyphenethyl)-phthalimide (3) in dry media under microwave irradiation.     

Thermal modulated interaction of aqueous steroids using polymer-grafted capillaries

Poly(N-isopropylacrylamide) (PIPAAm) of controlled molecular weight was densely grafted onto glass capillary lumenal surfaces using surface-initiated atom transfer radical polymerization (ATRP). Temperature-dependent changes of these thermoresponsive brush surfaces with hydrophobic steroids were investigated by exploiting thermoresponsive aqueous wettability changes of the polymer-modified surfaces in microfluidic systems. IPAAm was polymerized on ATRP initiator-immobilized glass surfaces using CuCl/CuCl(2)/tris(dimethylaminoethyl)amine (Me(6)TREN) as an ATRP catalyst in water at 25 degrees C. PIPAAm graft layer thickness and its homogeneity on glass surfaces are controlled by changing ATRP reaction time. Aqueous wettability changes of PIPAAm-grafted surfaces responses drastically changed to both grafted polymer layer thickness and temperature, especially at lower temperatures. Temperature-responsive surface properties of these PIPAAm brushes within capillary inner wall surfaces were then investigated using capillary chromatography. Effective interaction of hydrophobic steroids with dehydrated, hydrophobized PIPAAm-grafted capillary surfaces was observed above 30 degrees C without any column packing materials. Steroid elution behavior from PIPAAm-grafted capillaries contrasted sharply with that from PIPAAm hydrogel-grafted porous monolithic silica capillaries prepared by electron beam (EB) irradiation wherein significant peak broadening was observed at high-temperature regardless of sample hydrophobicity factors (log P values), indicating multistep separation modes in coated monolithic silica capillaries. In conclusion, thermoresponsive polymer-grafted capillary inner wall surfaces prepared by ATRP exhibit useful temperature-dependent surface property alterations effective to regulate interactions with biomolecules without requirements for separation bed packing materials within the capillary lumen.     

Analyzing small samples with high efficiency: capillary batch injection–capillary electrophoresis–mass spectrometry

We present an experimental approach to conducting fast capillary electrophoresis-mass spectrometry (CE-MS) measurements of very small samples in the nanoliter range. This is achieved by injecting sample very efficiently into a CE-MS system. Injection efficiency represents the ratio of injected sample to the amount of sample needed for carrying out the injection process (v/v). In order to increase this injection efficiency from typical values of 10(-3) to 10(-7), the concept of capillary batch injection is used to build an automated, small-footprint injection device for CE-MS. This device is capable of running true multi-sample measurement series, using minimal sample volumes and delivering an injection efficiency of up to 100?%. It is compatible with both aqueous and non-aqueous background electrolytes. As an additional benefit, CE-MS separations of a catecholamine model system in capillaries of 15?cm length under conditions of high electric field strength could be accomplished in 20?s with high separation efficiency. This report details design and specifications of the injection device and shows optimal parameter choices for injections with both high injection efficiency and high separation efficiency. Furthermore, a procedure is presented to coat the tip of a fused silica capillary with a silicone elastomer which acts as a seal between two capillaries.     

Assessment for the light-induced cis-trans isomerization of rhapontigenin and its glucoside rhaponticin by capillary electrophoresis and spectrometric methods

The light-induced cis-trans isomerization of rhapontigenin (RHA) and its glucoside rhaponticin (RHA-Glc) were evaluated under ultraviolet (UV) light irradiation. A simple and rapid capillary electrophoresis method was developed for the kinetic study of four stilbenes (both cis and trans form of RHA and RHA-Glc). These analyses were achieved by using β-cyclodextrin (β-CD) modified capillary zone electrophoresis with diode array detector (CZE-DAD). The method provided reliable separations with a short analysis time of 3 min. The purity of individual compound was checked by UV spectral comparisons with known standards, and further confirmed by (1)H and (13)C nuclear magnetic resonance (NMR) spectroscopy. Furthermore, the UV absorbance and the molar absoptivity (ε) values were determined by UV-vis spectrophotometer to be 36824 L mol(-1) cm(-1) at λ(max) 324.5 nm for trans-RHA and 43894 L mol(-1) cm(-1) at λ(max) 325 nm for trans-RHA-Glc in methanol/water mixture solution (50%, v:v), respectively. CZE, UV-vis and NMR spectroscopy studies provided similar conclusions by considering the influence of irradiation time and the influence of irradiation wavelength.     

RED LIGHT INTERACTIONS WITH BLUE AND ULTRAVIOLET LIGHT IN POLAROTROPISM OF GERMLINGS OF A FERN AND A LIVERWORT

Abstract— In polarotropism of the chloronema of the fern Dryopteris filix-mas (L.) Schott and of the germ tube of the liverwort Sphaerocarpos donnellii Aust. a phytochrome action in blue and u.v. was presumed[1, 2]. In the present paper this assumption was tested by simultaneously irradiating with red and blue, and red and near u.v. Red energy is given to shift the phytochrome photoequilibrium in favour of high P _fr/ P ^total concentrations. The data obtained by simultaneous irradiation are consistent with the predictions made under the assumption of a phytochrome involvement in the blue- and u.v.-mediated polarotropic response.     

FLASH PHOTOLYSIS OF SEVERAL AROMATICS BY ULTRAVIOLET LIGHT AND VISIBLE LIGHT IN THE PRESENCE OF EOSIN Y*

Abstract— A flash photolysis investigation was made of the photo-oxidation of aqueous aniline, resorcinol, βnaphthol, p-sulfanilic acid, and p-bromophenol induced by ultraviolet and visible light irradiation in the presence of eosin Y. The transient spectra show that u.v. irradiation generates the hydrated electron (except in p-bromophenol) and the radical products of one-electron oxidation. The initial products of the eosin-sensitized oxidations are the dye semi-quinone and aromatic radicals which coincide with the u.v. photolysis products in at least several cases. The investigation of the reaction kinetics by rapid spectrophotometry with analog computer analysis shows that the aromatics quench the triplet state of eosin and also react with it in a slower electron-transfer process, in competition with ‘dye-dye’ quenching and electron-transfer reactions. The u.v. and dye-sensitized oxidations are discussed in terms of their energetics.     

Dual-light source excitation for mode-filtered light detection

The sensitivity of a multi-channel mode-filtered light detection system has been enhanced by using a dual-light source irradiation technique. The detection system was constructed from an annular column consisting of a bare optical fibre inserted into a capillary. Sample was introduced through the gap between the fibre and the capillary. A multi-channel charge-coupled device was set on the side of the capillary at which four detection windows could be simultaneously monitored. The changes in the intensities of the mode-filtered light on exposure to various concentrations of ethanol samples from each detection window were monitored. The theoretical studies on the sensitivity of detection of the detection system using dual-light source irradiation have been described. The sensitivity of detection was enhanced when a dual-light source instead of a single-light source was employed. The working concentration range for ethanol was 0-80% (v/v) ethanol. The limit of detection was determined to be 1% (v/v) ethanol. The proposed method has been successfully applied to the determination of ethanol contents of some wine samples. The results were satisfactory compared with values obtained from a standard reference method.     

High-speed gas chromatography: the importance of instrumentation optimization and the elimination of extra-column band broadening

This review provides a summary of chromatographic theory as it applies to high-speed gas chromatography. A novel method for determining the optimal linear flow velocity, u (opt), from specific experimental parameters, is discussed. An in-depth theoretical understanding of u (opt) and its relation to experimental parameters is presented, in the absence of extra-column band broadening, as a means of method evaluation and optimization. Recent developments in high-speed GC are discussed, in the context of the theory presented within this review, to ascertain the influence of extra-column band broadening. The theory presented herein can be used as a means of evaluating the various areas of GC instrumentation (injection, separation, detection, etc.) that need further development to further minimize the effects of extra-column band broadening. The theoretical framework provided in this review, can be, and is, readily used to evaluate high-speed GC results presented in the literature, and thus, the general practitioner may more readily select a specific capillary length and/or internal diameter for a given application. For example, it is theoretically shown, and prior work cited, that demonstrates a peak width of approximately 1 ms is readily achievable in GC, when extra-column band broadening is eliminated.     

Changing the Electrophoretic Mobility of Phenols Using Ionenes as Additives in the Buffer Electrolyte

Water-soluble polymers of the ionene class with increased hydrophobicity (2-10-, 6-9-, and 3-X-ionenes) are used as modifiers in capillary electrophoresis in the determination of p-nitrophenol, phenol, and resorcinol. It is shown that 2-10-ionene provides the highest selectivity of phenol separation among all of the selected ionenes. The application of this polymer increases the selectivity of determination compared to commercially available 3-6-ionene (Polybrene) and poly(diallyldimethylammonium chloride). Under optimum conditions (a phosphate buffer solution, pH 11, U = –15 kV, l _cap = 50 cm), the separation efficiency of more than 40000 theoretical plates per capillary has been achieved with an analysis time of about 8 min. Using a stacking procedure, the efficiency of more than 250000 theoretical plates per capillary has been achieved. Changes have been introduced into the design of the capillary cartridge of a Kapel'-103R instrument. As a result, it has been possible to increase the field strength up to 1180 V/cm and, thus, to decrease the analysis time down to 2.5 min. The sensitivity of the instrument is mainly determined by the quality of the equipment used. The limits of detection of phenols are about 40 g/mL for a Kapel'-103R instrument and 0.05–0.1 g/mL for a Hewlett-Packard HP^3D CE.     

Construction and analytical application of an on-column photo reactor for improved detection of iron-species as plant metabolites in capillary flow injection and capillary electrophoresis

An on-column photo reactor for CE, which is constructed from UV-transparent capillaries and a small Pen-Ray UV lamp, is applied to the analysis of small, non-covalent iron-species. These iron-species, e.g. phytosiderophores (PS) in grasses and the non-protein amino acid nicotianamine (NA), play an important role in plant metabolism. The photo reactor is placed directly in front of the on-column absorbance detector, illuminating only some centimeters of the capillary. The photo reactor is used for capillary electrophoresis (CE) and also for capillary flow injection analysis (CFIA). Photoinduced sensitivity changes for model iron-species and for plant extracts are investigated, using UV detection and capacitively coupled contactless conductivity detection (C(4)D). The detection sensitivity for iron-species is enhanced in CFIA; the enhancement factor depends on the type of iron-species. In CE, the sensitivity of iron-species is kinetically dependent on the type of iron-species, decreasing with both detectors, but a photo reaction product is detectable. The relationship between irradiation window length and sensitivity is investigated quantitatively using EDTA-Fe(III). Pure ligands without iron are little affected by the photo reaction in both CFIA and CE. In CE, the detector signals of iron-species in real plant samples are selectively decreased with the proposed photo reactor, thus enabling a simple screening method for such photoactive iron-species.     

On-line analysis of carbonyl compounds with derivatization in aqueous extracts of atmospheric particulate PM10 by in-tube solid-phase microextraction coupled to capillary liquid chromatography

A new device for carbonyl compounds based on coupling on-line and miniaturizing both, sample pretreatment and chromatographic separation, is reported. Two capillary columns, a GC capillary column (95% methyl-5% phenyl substituted backbone, 70 cm × 0.32 mm i.d., 3 μm film thickness) in the injection valve for in-tube solid-phase microextraction (IT-SPME) and a Zorbax SB C18 (150 mm × 0.5 mm i.d., 5 μm particle diameter) LC capillary column were employed. Different combinations of IT-SPME and derivatization using 2,4-dinitrophenylhydrazine (DNPH) were examined for mixtures containing 15 carbonyl compounds (aliphatic, aromatic and unsaturated aldehydes and ketones). A screening analysis of aqueous extracts of atmospheric particulate PM(10) was carried out. Moreover, the possibility of coupling IT-SPME and conventional liquid chromatography is also tested. Derivatization solution and IT-SPME coupled to capillary liquid chromatography provided the best results for achieving the highest sensitivity for carbonyl compounds in atmospheric particulate analysis. Detection limits (LODs) using a photodiode array detector (DAD) were ranged from 30 to 198 ng L(-1), improving markedly those LODs reported by conventional SPME-LC-DAD.