煤中碳硫键的室温选择性断裂

通过室温下高硫煤的Ｓ甲基化反应,可使煤结构中的一种碳硫键选择性断裂。煤样先经Ｏ甲基化反应,使酚羟基转变为甲基醚,然后再经由碘甲烷和四氟硼酸银组成的Ｓ甲基化试剂进行Ｓ甲基化反应。断裂后硫以四氟硼酸三甲基锍的形式用１３ＣＮＭＲ进行检测。以模型化合物４,４二甲氧基二苄基硫醚进行Ｓ甲基化反应,亦可高产率地生成四氟硼酸三甲基锍。提出一个由苄基碳正离子和硫醚组成的离子偶极集合物作为反应中间体的反应机理。最后,１３ＣＮＭＲ定量分析结果表明,烟煤中含有约２％的４,４二甲氧基二苄基型硫醚或４,４二羟基二苄基型硫醚。     

直接进样电喷雾离子阱质谱法对含硫三联吡啶衍生物的研究

采用电喷雾电离质谱通过直接进样方式对合成的3个含硫的三联吡啶配体及2个钌配合物进行分析,详细研究了其在电喷雾条件下的质谱行为。结果表明,含有芳硫基和苄硫基的三联吡啶配体在电喷雾过程中采取了不同的断裂方式,前者首先从与芳硫键相连的碳硫键断裂失去不含硫的部分碎片离子,而后者则从苄基碳硫键断裂失去含硫的部分碎片离子。两类配体与钌形成的配合物均具有较稳定的结构,不易发生多级质谱断裂。通过对配合物分子离子峰和同位素峰的分析讨论,确定了含硫的三联吡啶合钌配合物的结构。这一研究结果表明电喷雾多级串联质谱适合于含硫三联吡啶类配体及其钌配合物的结构研究,方法简便高效、准确可靠,为该类化合物的结构研究提供了参考。     

光照条件下碳-硅键断裂及其溴代反应研究

研究了在高能量紫外光照条件下,苄基硅试剂的碳-硅键断裂过程及随后的高效溴代反应.该反应在紫外光照条件下,室温下即可温和且高效地进行,从而发展了一套新型的由苄基硅试剂合成苄基溴代物的方法.同时提出了该反应的可能机理.     

冠硫醚的质谱分析

本文报道了一类以1,4,8,11-十四冠硫醚-4为基本结构的冠硫醚的质谱裂解规律。通过对质谱裂解机理的解析,得到了以碳硫键断裂为特征的质谱图,并归纳出一系列共有的特征碎片离子。阐明这些质谱裂解规律将有助于这类冠硫醚型化合物的结构推断。     

低价钛引起的芳基二硫醚与α,β-不饱和酯(腈)的反应

芳香族二硫醚在低价钛试剂作用下，S-S键还原断裂成芳硫负离子，再与α,β-不饱和酯(腈)发生Michael加成反应，得到β-硫代酸酯(腈)。     

低价钛引起的芳基二硫醚与α,β-不饱和酯(腈)的反应

芳香族二硫醚在低价钛试剂作用下,S-S键还原断裂成芳硫负离子,再与α,β-不饱和酯(腈)发生Michael加成反应,得到β-硫代酸酯(腈)。     

非光催化与电化学体系下有机硫试剂参与的烯烃构建C—S键研究进展

烯烃是重要的合成子,其简洁高效的合成转化一直是有机合成领域的研究热点.近年来,基于烯烃骨架的C-S键成键反应特别受科学家的关注.烯烃可以与常见的有机含硫试剂(包括硫醇或硫酚、二硫醚、亚砜、磺酰肼、磺酰氯和亚磺酸钠等)反应,在烯烃的α-位或者β-位构筑C—S键来合成硫醚、亚砜或砜类化合物.鉴于此,以有机硫试剂的种类为分类...     

二碘化钐还原硫代碳酸酯

在ＳｍＩ＿２－ＨＭＰＡ－ＴＨＦ－ｔ－ＢｕＯＨ体系中，硫代碳酸酯的酰硫键发生还原断裂反应，得到相应的二硫醚产物。     

直馏柴油中硫化物甲基锍盐合成及电喷雾-高分辨质谱分析

在四氟硼酸银的催化作用下,以碘甲烷对直馏柴油进行甲基衍生化反应,使其中的有机硫化物转变成极性较强的锍盐,再用电喷雾-傅立叶变换离子回旋共振质谱仪进行检测。结合气相色谱-脉冲火焰光度检测器(GC-PFPD)分析,研究不同类型的硫化物甲基衍生化反应的选择性和转化率。结果表明:柴油中硫化物在室温条件下容易与碘甲烷发生甲基化反应,大部分硫化物转化为锍盐,总转化率超过80%,苯并噻吩类比二苯并噻吩类更易发生甲基衍生化反应,转化率也相应较高。烷基二苯并噻吩不同取代位异构体间反应选择性存在较大差异,高分辨质谱分析结果表明,直馏柴油中存在环状硫醚类化合物。     

黄原酸酯及二硫代硫酸酯与零价钯的反应

黄原酸烯丙基酯在Pd(pph₃)₄-dppe催化下,发生碳氧键断裂,放出气体硫化羰基(COS),生成烯而基硫醚。二硫代碳酸烯丙基酸在Pd(O)催化下,同样生成烯丙基硫。     

Cleavage of α-(phenylthio)alkylboranes with N-chlorosuccinimide. A convenient route to monothioacetals and acetals

α-(Phenylthio)alkylboranes, which are easily prepared by two different homologation processes, are deboronated by N-chlorosuccinimide in mildly basic methanol to form monothioacetals or, with excess reagent, dimethyl acetals. Both boronic esters and trialkylboranes react, the latter considerably faster. The reaction is specific for the sulfur-substituted alkylborane group, suggesting that initial chlorination occurs at sulfur. Under free radical conditions, α-(phenylthio)alkaneboronic esters are cleaved to α-(phenylthio)alkyl chlorides by either N-chlorosuccinimide or sulfuryl chloride. Pinacol phenylthio(triphenylstannyl)methaneboronate with sulfuryl chloride yielded (phenylthio)dichloromethane, without any evidence of selectivity between carbontin and carbonboron bond cleavage.     

Sulfur modification of polyethylene surfaces. I. Insertion of sulfur into polyethylene surfaces

Atomic sulfur generated respectively by the pyrolysis of carbonyl sulfide and by the photolysis of carbonyl sulfide, carbon disulfide, and sulfur vapors has been shown to modify irreversibly the surface of polyethylene as shown by wettability measurements. The nature of the modification is not completely apparent from this portion of the study, however, insertion of the atomic sulfur into a carbon—hydrogen bond to form a surface thiol group appears likely. The modified surfaces thus formed are shown to undergo several classical organic reactions, as determined by wettability measurements.     

Four- and five-membered cobaltacycles by regioselective cyclometallation of benzyl sulfide derivatives via Co(v) intermediates

C-H activation through the coordination of a benzyl sulfide anchoring group with a C-S bond cleavage at a Co(v) center constitutes a regiospecific access to four- and five-membered metallacycles under mild conditions.     

Oxygen transfer reactions. 4. Reaction of high valent oxoruthenium compounds with sulfides

The oxidation of methoxy substituted benzyl phenyl sulfides can be used to distinguish between oxidants that react by single electron transfer (followed by oxygen rebound) and those which react by direct oxygen atom transfer in a two-electron process. Transfer of a single electron results in the formation of an intermediate radical cation, which can undergo C-S bond cleavage and deprotonation reactions leading to the formation of methoxy substituted benzyl derivatives, methoxy substituted benzaldehydes, and diphenyl disulfide. The oxidation of 4-methoxybenzyl phenyl sulfide and 3,4,5-trimethoxybenzyl phenyl sulfide by oxidants known to participate in single electron transfers (Ce(4+), Mn(3+), and Cr(6+)) results in the formation of the corresponding benzaldehydes, benzyl alcohols, benzyl acetates, and benzyl nitrates in variable yields. However, the only products obtained from the oxidation of the same compounds with RuO(4), RuO(4-), and RuO(4)(2-) are sulfoxides and sulfones. Therefore, it is concluded that the oxidation of sulfides by oxoruthenium compounds likely proceeds by a concerted mechanism.     

Designing molecules for PDT: red light-induced DNA cleavage on disulfide bond activation in a dicopper(II) complex

The binuclear copper(II) complex [Cu)(RSSR)2](1), where RSSR is a dianionic Schiff base derived from 2-(thioethyl)salicylaldimine having a disulfide bond is prepared, structurally characterized by X-ray crystallography and its photo-induced DNA cleavage activity studied. The Schiff base ligand H2RSSR is also structurally characterized. The crystal structure of shows the discrete dimeric nature of the complex with each metal showing square-planar geometry with a CuN2O2 coordination (Cu...Cu, 5.011(1)A). The tetradentate Schiff base RSSR acts as a linker of two copper centers. The sulfur atoms in the disulfide unit do not show any apparent interaction with the metal ion. Complex 1, which is cleavage inactive in the dark in the presence of reducing agents, shows significant cleavage of supercoiled pUC19 DNA on exposure to UV light of 312 nm or visible light of different wavelengths under aerobic conditions, in the absence of any additives. DNA cleavage data from control experiments reveal involvement of the disulfide unit as a photosensitizer undergoing photo-induced S-S bond cleavage on exposure to UV light and the resulting species activates molecular oxygen to form singlet oxygen (1O2) that causes DNA cleavage following a type-II process. Photo-induced DNA cleavage by 1 on red-light exposure using a CW laser of 632.8 nm or a pulsed ruby laser of 694 nm is proposed to involve sulfide radicals in a type-I process and hydroxyl radicals as the reactive species.     

MOLECULAR REARRANGEMENTS. VI. THERMOLYSIS OF α-(N-ARYL)BENZYL ARYL SULFIDES

Abstract

In view of the significance of studying the effect of heat on organic compounds especially those containing nitrogen and/or sulfur, six substituted α-(N-aryl) benzyl aryl sulfides (4–9) were prepared and subjected to thermolysis at 200°C.

Surveying of the reaction products showed the formation of amines, benzylidene amines, sulfides, disulfides, dibenzyl, stilbene, benzthiazole, benzimidazole, tetraphenyl thiophene as principle products in variable ratios according to the type of the starting sulfide.

A mechanism involving the homolytic cleavage of the C[sbnd]S and the C[sbnd]N bond is suggested to rationalize the thermolysis products.     

Ring cleavage reactions of methyl α-D-allopyranoside derivatives with phenylboron dichloride and triethylsilane

In the course of our studies on the regioselective carbon-oxygen bond cleavage of the benzylidene acetal group of hexopyranosides with a reducing agent, we found that a combination of a Lewis acid and a reducing agent triggered a ring-opening reaction of the pyranose ring of methyl α-D-allopyranosides. The formation of an acyclic boronate ester by the attachment of a hydride ion at C-1 indicated that the unexpected endocyclic cleavage of the bond between the anomeric carbon atom and the pyranose ring oxygen atom proceeded via an oxacarbenium ion intermediate produced by the chelation between O5/O6 of the pyranoside and the Lewis acid, followed by nucleophile substitution with a hydride ion at C1.     

An unprecedented rearrangement in collision-induced mass spectrometric fragmentation of protonated benzylamines

The collision-induced dissociation (CID) mass spectra of several protonated benzylamines are described and mechanistically rationalized. Under collision-induced decomposition conditions, protonated dibenzylamine, for example, loses ammonia, thereby forming an ion of m/z 181. Deuterium labeling experiments confirmed that the additional proton transferred to the nitrogen atom during this loss of ammonia comes from the ortho positions of the phenyl rings and not from the benzylic methylene groups. A mechanism based on an initial elongation of a C--N bond at the charge center that eventually cleaves the C--N bond to form an ion/neutral complex of benzyl cation and benzylamine is proposed to rationalize the results. The complex then proceeds to dissociate in several different ways: (1) a direct dissociation to yield a benzyl cation observed at m/z 91; (2) an electrophilic attack by the benzyl cation within the complex on the phenyl ring of the benzylamine to remove a pair of electrons from the aromatic sextet to form an arenium ion, which either donates a ring proton (or deuteron when present) to the amino group forming a protonated amine, which undergoes a charge-driven heterolytic cleavage to eliminate ammonia (or benzylamine) forming a benzylbenzyl cation observed at m/z 181, or undergoes a charge-driven heterolytic cleavage to eliminate diphenylmethane and an immonium ion; and (3) a hydride abstraction from a methylene group of the neutral benzylamine to the benzylic cation to eliminate toluene and form a substituted immonium ion. Corresponding benzylamine and dibenzylamine losses observed in the spectra of protonated tribenzylamine and tetrabenzyl ammonium ion, respectively, indicate that the postulated mechanism can be widely applied. The postulated mechanisms enabled proper prediction of mass spectral fragments expected from protonated butenafine, an antifungal drug.     

稀土氧化物对中高碳钢堆焊金属中夹杂物变质作用的热力学分析

采用热力学方法,研究了稀土氧化物对中高碳钢堆焊金属中夹杂物的变质作用。夹杂物生成的热力学分析表明,在堆焊熔池中,稀土氧化物可以被碳还原成稀土元素,稀土元素可以与氧、硫生成稀土氧化物、稀土硫化物和稀土硫氧化物,从而达到脱氧、脱硫、净化堆焊熔池的作用;稀土氧化物还可以直接与硫作用,生成稀土硫氧化物,起到脱硫的效果。     

Synthesis of 2-mercapto-substituted thieno[2,3-d]thiazoles and ben zothieno[3,2-d] thiazoles

2-Mercaptothieno[2, 3-d]thiazoles were synthesized from bis(2-nitro-3-thienyl) disulfide by successive reduction of, initially, the disulfide bond and the nitro group in the presence of carbon disulfide without isolation of the intermediate 2-nitro-3-mercaptothiophene. 2-Mercaptobenzo-[b]thieno[3, 2-d]thiazole was synthesized by reaction of 3-aminobenzo[b]thiophene hydrochloride with sulfur monochloride and cleavage of the resulting benzo[b]thienothiazothionium chloride with sodium sulfide in the presence of carbon disulfide.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1355–1356, October, 1976.