Se和SeO2在O2/CaO (001)表面吸附反应的第一性原理研究

基于密度泛函理论的第一性原理和平板模型构造了最稳定的O₂/CaO（001）表面,通过优化Se和SeO₂在此表面可能的初始吸附结构得到最佳吸附构型,分析了Se原子在O₂/CaO（001）表面向SeO₂的转化。结果表明,Se原子在O₂/CaO（001）表面的稳定吸附构型主要有两种,即O-Se-O和O-O-Se基团,其中,O-O-Se基团的Se终端具有一定化学活性;Se在O₂/CaO（001）表面向SeO₂转化所需反应能垒小于均相条件下生成SeO₂所需反应能垒,表明CaO不仅作为吸附剂,也能促进Se向SeO₂的转化;SeO₂分子在O₂/CaO（001）表面发生化学吸附时,吸附基底的部分价电子转移至SeO₂分子轨道中。     

From ephemers to monomers, oligomers and polymers. New methods for the generation and transformation of silanones

New efficient routes to the generation of silanones at relatively low temperatures are based on the following reactions:

1. (1) reaction of linear and branched perhydrocarbyldisiloxanes and oligosiloxanes, and of some of their C-functional derivatives, with gallium or indium iodides or bromides;

2. (2) reaction of hydrocarbylchlorosilanes R_4−nSiCl_n (n = 2–4) and SiCl₄ with dimethylsulphoxide (with or without Mg or Zn);

3. (3) Autodecomposition of organosilicon compounds containing and groups;

4. (4) reaction of R_4−nSiCl_n with metal oxides of high redox potential (with or without the presence of CH₃CN).

Insertions of dialkylsilanones into Si---O---Si and Si---O---C linkages as well as into the Si---Cl bond have been studied.     

O2和CO在Ni(111)表面的吸附活化

采用高分辨电子能量损失谱(HREELS)、俄歇电子能谱(AES)和低能电子衍射(LEED)研究镍单晶表面氧物种及CO与O₂的共吸附。实验结果表明,Ni(111)表面氧化后存在两种氧物种,位于54 meV能量损失峰的表面化学吸附氧物种和位于69 meV能量损失峰的表面氧化镍。首先,随着暴露氧量的增加,表面化学吸附氧物种的能量损失峰蓝移至58 meV;其次,通过真空退火及与CO相互作用考察,发现表面化学吸附氧物种较不稳定。在室温条件下,表面预吸附形成的表面化学吸附氧物种与CO共吸附,导致端位吸附CO增多,表明氧优先吸附在穴位上,随着CO暴露量的增加化学吸附氧物种与CO反应脱去;而表面氧化镍需在较高温度和较高CO分压下才能被CO还原。预吸附CO可被氧逐渐移去。     

活性炭纤维催化氧化NO的量子化学研究

利用密度泛函理论的B3LYP方法,6-31G(d)基组,在zigzag型的四并苯模型上对NO、O2分子在活性炭纤维(ACFs)表面的吸附行为进行研究,并探讨了ACFs催化氧化NO的主要机理路径。研究结果表明,环境气氛中的O2分子可以先吸附于ACFs表面形成两个半醌基(C-O),之后C-O和吸附态的NO(C-NO)发生氧化反应生成-NO2;游离态的O2也可以经过ACFs表面的催化作用形成活性氧原子(O*)从而直接和吸附态的NO反应生成-NO2。与NO相比,O2分子的吸附能大,在同NO的竞争吸附中占据优势,结合统计热力学分析,吸附态的NO和游离态的O2所产生的活性氧原子发生氧化反应是NO转化为NO2的主要途径。     

Photochemistry of perfluoroacyl halides in the presence of O2 and CO

Photolyses of CF₃C(O)X and C₂F₅C(O)X (X=Cl, F) at 254 nm in the presence of O₂ yield the perfluorinated radicals C₂F₅O (C₂) and CF₃O (C₁), respectively. The C₂ radicals decompose to give CF₃ radicals:

C₂F₅O→CF₃+CF₂O

which, in turn, react with O₂ leading to the formation of C₁ radicals. When in addition to O₂, CO is present, the C₁ radicals react with it leading to its catalytic oxidation to CO₂. The trioxide CF₃OC(O)O₃C(O)OCF₃ was observed following the photolysis of all four halides in the presence of O₂ and CO.

The other radical partners coming from the initial step in the photolysis (XC(O)) as well as the products of their reaction with O₂ (XC(O)O_y, y=1, 2) do not react with CO but when X=F they lead to the formation of a new stable peroxy molecule with the formula CF₃OC(O)O₂C(O)F. Some of the properties of this new molecule, its stability and its IR features are presented in this work.     

The interaction of molecular oxygen with active sites of graphite: a theoretical study

The adsorption of molecular oxygen at defective edge sites of zigzag and armchair graphite surfaces has been investigated by adopting cluster models in conjunction with density functional theory. Several different types of chemisorbed O₂ species are identified. It was found that the defect edge sites exhibit the significant catalytic role toward the adsorption and activation of molecular oxygen. The O₂ molecule is not only able to strongly bind to these edge sites, but the O–O bond strength is obviously weakened. Moreover, the calculated adsorption energy for O₂ adsorbed on the clean graphite basal surface is fairly consistent with the weak interaction nature of O₂ with the surface observed in the experiment, indicating one-layer cluster model is an effective way to study O₂ adsorption on graphite surface in terms of accuracy and computational cost, which is in agreement with previous experience. Whereas, we note that the local detailed arrangement of edge carbon atoms can play an important effect on the adsorption of O₂ on defect surfaces.     

Al2O3/Au(111)反相催化剂在CO氧化反应中界面作用的理论研究

氧化物负载的金催化剂具有温和条件下优异的CO催化氧化活性。实验与理论计算表明,金与氧化物两相界面在催化反应过程中具有重要地位。反相催化剂提供了全新的角度以探究界面的重要地位。本文以Au（111）表面负载Al₂O₃团簇为反相催化剂模型,基于密度泛函理论,对催化剂模型的构型、界面性质以及O₂、CO的吸附与氧化进行了理论计算与研究。理论计算表明：电荷的迁移增强了Al₂O₃小团簇在Au（111）表面的附着,在催化剂金表面与氧化铝的两相界面位置,Au原子与Al原子的协同作用使得氧分子易于在界面位置吸附,并因此高度活化。对催化CO氧化反应路径,分别计算了缔合机理和解离机理不同路径,从活化能分析表明缔合机理比解离机理更可能发生。本文的工作揭示了反相催化剂催化CO氧化的活性本质,表明两相界面在金催化CO氧化中具有重要作用。     

NO reduction and CO oxidation over Cu/Ce/Mg/Al mixed oxide catalyst in FCC operation

Simultaneous NO reduction and CO oxidation in the presence of O₂, H₂O and SO₂ over Cu/Mg/Al/O (Cu-cat), Ce/Mg/Al/O (Ce-cat) and Cu/Ce/Mg/Al/O (CuCe-cat) were studied. At low temperatures (<340 °C), the presence of O₂ or H₂O enhanced the activity of CuCe-cat for NO and CO conversions, but significantly suppressed the activity of Cu-cat and Ce-cat. At high temperature (720 °C), the presence of O₂ or H₂O had no adverse effect on the NO and CO conversions over these catalysts. The addition of SO₂ to NO+CO+O₂+H₂O system had no effect on the reaction of CO+O₂ over Cu-cat, but deactivated this catalyst for NO+CO and CO+H₂O reactions; over Ce-cat, all of these reactions of NO+CO,CO+O₂ and CO+H₂O were suppressed significantly; over CuCe-cat, NO+CO and CO+O₂ reactions were not affected while the reaction of CO+H₂O was slightly inhibited.     

A computer program for searching the best model for describing different experimental systems

An algorithm for searching the best polynomial analytical function for describing different experimental systems is presented. It is based

1. (1)on the generation of all possible analytical functions of a given order, with a given number of terms and with a given number of independent variables, and

2. (2)on the calculation of the parameters of all selected functions using the linear regression method.

To show the ability of the program two different examples are given:

1. (1) searching the best univariate polynomial model, and

2. (2) modelling of the stability of a two-component mixture as a function of three factors.

An electron transfer mechanism of O4 formation

A resonating valence bond electron transfer mechanism of combining two O₂ molecules to form an O₄ molecule is presented. The predicted molecular states of the reaction path D_∞h→C_2v→D_2h are supported by the present ab initio molecular orbital calculations. The CASPT2 BSSE calculations yield a stable diamagnetic D_2h O₄ molecule with a very weak chemical bond between the monomers, in good agreement with experiments. A low activation barrier energy of 26 cal/mol for the O₄ formation is found.     

ZrO2修饰Cu催化剂还原以及反应过程中表面组成的变化

通过热分解法制备Cu模型催化剂,然后经浸渍制备ZrO₂/Cu催化剂,采用SEM、XPS考察了催化剂表面形态和组成,并采用in-situ Raman考察了催化剂在还原和吸附CO和水的过程中随时间的变化。结果表明,还原前Cu催化剂表面主要存在CuO物种,而在ZrO₂/Cu表面,除了CuO物种,还存在着大量的表面羟基物种。ZrO₂/Cu相对Cu更加容易还原为Cu⁰,同时,ZrO₂在催化剂表面聚集形成絮状态,而Cu催化剂还原后主要形成Cu₂O物种。Cu催化剂表面吸附CO后,除了形成Cu-CO外,Cu₂O物种均会迅速消失形成CO₂。Cu催化剂对水的作用比较弱,但是ZrO₂/Cu催化剂和水作用较强,并且通过Cu-OH中间物形成Cu₂O物种。     

吸附在活性Al2O3上的TEMPONE自由基ESR谱

近来,用ESR方法研究吸附在催化剂载体表面上的氧氮自由基行为引起了广泛的兴趣,Lozos等[1]观察到DTBN在Al₃O₃-SiO₃等载体上有两种谱:一种是¹⁴N(I=1)所引起的三重谱;另一种是²⁷Al(I=5/2)引起的六重谱。     

High temperature reaction of SiCl4 and O2 in quartz tubes

The reaction between SiCl₄ and O₂ at 1 atm between 25 and 1200°C has been followed by mass spectrometry. Below 600°C no reaction with O₂ is noted. Above 600°C the reaction proceeds in two steps. Between 800 and 1000°C the ²⁸Si/³²O₂ peak height ratio is constant with no evolution of Cl₂. It is suggested that silicon oxychlorides are being formed in this temperature regime. Above 1000°C the reaction between SiCl₄ and O₂ intensifies with concomitant production of Cl₂. It is suggested that above 1000°C the reaction SiCl₄ + O₂ → SiO₂ + Cl₂ becomes important.

At low temperatures (<800°C) adsorbed H₂O and OH groups from the surface of the fused silica tube react with SiCl₄ to form HCl. The importance of this reaction decreases with increasing temperature. The increased production of HCl above 1000°C is ascribed to H₂O and H₂ diffusing from the tube.     

Characterization of PdO/Ce0.8Y0.2O1.9 catalysts for carbon monoxide and methane oxidation

The Ce_0.8Y_0.2O_1.9 solid solution was prepared by nitrate sol–gel method, and a series of catalysts with different PdO loading were prepared using impregnation method. These catalysts were characterized by XRD, Raman, CO-TPR, CO₂- and O₂-TPD techniques. The PdO is highly dispersed on the surface of the solid solution when the loading is lower than 0.5 wt.%. As PdO loading increases to 2 wt.%, it begins to form the crystalline structure. CO₂-TPD profiles show that the CO adsorbed on highly dispersed PdO is more easily oxidized to CO₂ than that adsorbed on crystalline structure and O₂-TPD results indicate that it is more difficult to decompose for highly dispersed PdO than that for crystalline structure. CO-TPR profiles show that the highly dispersed PdO is easily reduced. Catalytic activities of these catalysts for CO and CH₄ oxidation indicate that both the highly dispersed and crystalline PdO are the active site for CO oxidation, while the crystalline structure is the active site for CH₄ oxidation.     

NO在Er2O3/Bi2O3催化剂上的程序升温分解

NOx是造成大气污染的化学物质之一,因此,消除NOx是环境保护的一项重要任务,目前比较成熟的消除NOx工艺是用氨为还原剂和V2O5/TiO2为催化剂的选择催化还原(SCR)法[1],但其成本过高.     

IN situ Confocal Microprobe Raman Spectroscopic Studies on Defective La-based Complex Oxides

ＩＮｓｉｔｕＣｏｎｆｏｃａｌＭｉｃｒｏｐｒｏｂｅＲａｍａｎＳｐｅｃｔｒｏｓｃｏｐｉｃＳｔｕｄｉｅｓｏｎＤｅｆｅｃｔｉｖｅＬａ－ｂａｓｅｄＣｏｍｐｌｅｘＯｘｉｄｅｓＣＨＥＮＤｕ－ｈｕｉ,ＣＡＩＪｕｎ－ｘｉｕ,ＬＩＡＯＹｕａｎ－ｙｉａｎ,ＷＡＮＨｕｉ－ｌ...     

氧气对褐煤水蒸气气化半焦的活化及机理

以胜利褐煤为原料,利用一段流化床/固定床石英反应器,进行N_2/O_2/H_2O/H_2O+O_2气氛的褐煤热解/气化实验。采用BET、Raman、FT-IR、微波消解ICP-AES、TGA等技术表征半焦。研究氧气添加对气化反应以及半焦结构和反应性的影响,解析了氧气对气化半焦的活化机理。结果表明,氧气添加可以改变半焦结构,活化半焦,从而促进转化率、H_2产率和CO_2产率的提高。氧气对气化半焦的活化作用主要包括两个方面,一是芳核与氧气发生氧化分解反应,破坏了芳环大π键,形成了新的官能团,从而促进了反应(C+H_2O→H_2+CO)的发生;二是随反应的进行,芳香大环(≥6)结构解聚为芳香小环(3-5)结构,同时氧原子进入芳核,形成缺陷位C-O-C,从而导致半焦微晶结构的缺陷程度提高、缩聚程度降低,进而导致半焦反应性和表面吸附作用提高,促进反应(CO+H_2O→H_2+CO_2)的发生。     

CO对褐煤快速热解行为的影响

利用快速升温固定床进行了霍林河褐煤在CO气氛下快速热解反应行为的研究,考察了热解半焦的产率、性质和气体产物的分布特点。半焦的红外光谱图、元素含量和表面结构性质分析表明,CO参与并改变了褐煤的热解行为。与N₂气氛相比,热解温度低于600 ℃时,带孤对电子的极性CO容易诱发半焦结构中芳香环的开裂,侧链、醚键和脂肪链的断裂,促进小分子片段和自由基的生成,自由基稳定了煤热解生成的碎片,导致挥发分的生成和逸出量增加,H₂、CH₄、CO和CO₂的产率增大,半焦产率降低,半焦的比表面积和孔容增大。热解温度高于700 ℃时,CO的歧化反应程度增大,产生的积碳附着于半焦的表面,阻塞了孔道,导致半焦的比表面积和孔容减小,从而抑制了CO在半焦孔隙结构内部的扩散,限制了CO与煤中有机大分子结构的接触和反应,导致H₂、CH₄和CO产率减小,而CO₂产率因CO歧化反应而增大。     

一氧化碳分子在Pt/t-ZrO2(101)表面的吸附性质

运用广义梯度密度泛函理论(GGA-PW91)结合周期平板模型方法,研究了CO分子在完整与Pt负载的四方ZrO2(101)表面的吸附行为.结果表明:表面第二层第二氧位和表面第二桥位分别为CO分子和Pt原子在完整ZrO2(101)表面的稳定吸附位,且覆盖度为0.25ML(monolayer)时均为稳定吸附构型,吸附能分别为56.2和352.7kJ·mol-1.CO分子在负载表面的稳定吸附模式为C-end吸附,吸附能为323.8kJ·mol-1.考察了CO分子在负载表面吸附前后的振动频率、态密度和轨道电荷布居分析,并与CO分子和Pt原子在ZrO2表面的结果进行比较.结果表明,C端吸附CO分子键长为0.1161nm,与自由的和吸附在ZrO2表面后的CO相应值(0.1141和0.1136nm)相比伸长.吸附后C―O键伸缩振动频率为2018cm-1,与自由CO分子相比发生红移;吸附后CO带部分正电荷,电子转移以Pt5dCO2π的π反馈机理占主导地位.     

低阶煤半焦利用热重在O2/CO2、O2/N2和O2/Ar气氛下燃烧特性研究

利用热重研究了两种中国西北典型低阶煤半焦的燃烧特性。探究了不同气氛（O₂/CO₂、O₂/N₂和O₂/Ar）和不同氧气浓度对其燃烧特性的影响。实验结果表明,无论是反应气氛还是氧气浓度都会对低阶煤半焦的燃烧产生影响。相比于N₂和Ar,CO₂明显有利于燃烧反应进行：当反应气氛由O₂/CO₂变为O₂/Ar时,两种不同低阶煤半焦的燃尽温度分别升高了63.7和68.8℃;而当反应气氛由O₂/CO₂变为O₂/N₂时,两种不同低阶煤半焦的燃尽温度分别升高了135.9和129.6℃。在研究范围内,氧气浓度的提高也能明显提高半焦的燃烧性能。与此同时,半焦燃烧特性的动力学分析表明,随着氧气浓度提高,两种半焦燃烧反应的表观活化能E和指前因子A均呈增大趋势。通过对E和A两者关系的分析结果表明,半焦富氧燃烧的活化能和指前因子存在动力学补偿效应。