传感器用镓掺杂氧化锌纳米盘/纳米花状结构催化剂的制备及表面表征（英文）

采用简便的旋涂过程和一步水热法在压电基片上制备了Ga掺杂的ZnO纳米薄膜(GZO).在水热处理过程中,通过添加不同的聚合物可形成纳米盘和纳米花状形貌的薄膜.采用场发射扫描电镜(Fe-SEM)、X射线衍射(XRD)和Raman光谱表征了样品的形貌、微结构和组成.XRD和FE-SEM结果证明,在AlN/Si压电基片上形成的纳米盘、纳米棒和纳米花状GZO均为纤维锌矿相.采用浸渍法进一步在所制GZO样品上固定了绿色的荧光蛋白质(GFP).运用原子力显微镜和荧光光谱分析了GFP与GZO表面结合的性质,考察了其用于传感器和生物成像技术的可行性.痕量GFP的固定使该材料产生荧光响应,表明其用于紫外光传感器时具有较好活性.     

钨酸锌纳米结构的水热合成及其光催化性能研究

使用柠檬酸钠辅助的水热法合成了具有不同形貌的ZnWO4(如片状、花状)纳米颗粒,并采用X-射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)、高分辨透射电子显微镜(HRTEM)等方法对样品的结构和组成进行表征。研究了溶剂组分和溶液pH值对产物形貌的影响。通过对反应产物形貌随时间变化的观察,提出了片状和花状ZnWO4纳米颗粒可能的生长机理。以罗丹明B(RhB)为催化降解对象,对样品在水溶液中的光催化性质进行了研究。结果表明,ZnWO4纳米颗粒的比表面积和孔径尺寸等结构特性对其光催化活性具有明显影响。     

气体扩散法制备垂直排列氢氧化镁纳米薄片

以氯化镁和氢氧化铵为原料,采用气体扩散技术制备了垂直排列氢氧化镁纳米薄片。利用场发射扫描电子显微镜(FE-SEM)、X射线衍射(XRD)、红外光谱(IR)以及差热分析(DTA)等分析测试技术研究了纳米氢氧化镁薄片的形貌、结构、成分以及热稳定性和比表面积等,结果表明,纳米氢氧化镁薄片的生长是一个成核-生长-组装过程,随着生长时间的延长,形貌从二维紧凑型结构演变成三维花状超结构,反应过程中液体-晶体和液-气界面的自由能作用使得纳米薄片趋向于垂直排列。此外,氢氧化镁纳米薄片薄膜的疏水性能也进行了研究。     

纳米铝/金对纳米二,五-二苯基噁唑薄膜荧光特性的调制

以直流溅射方法和真空蒸镀方法结合制备了单组份纳米铝薄膜、纳米金薄膜、纳米二,五-二苯基噁唑(DPO)薄膜和双组份纳米Al/DPO、Au/DPO复合叠层薄膜。利用双势垒伏安特性曲线模拟计算、荧光分光光度计和扫描电子显微镜(SEM)表征了薄膜样品的电学性质、荧光性质和表面形貌。固态荧光光谱观察到500nm膜厚的Au/DPO、Al/DPO叠层结构复合纳米薄膜样品的荧光主峰发生了明显红移。Au/DPO叠层结构复合薄膜样品与单组份DPO纳米薄膜样品的荧光发射光谱相比较,叠层薄膜内相互作用较弱,而Al/DPO叠层结构复合纳米薄膜样品相互作用较强、谱线峰型变化较大,Al的谱线的半高全宽明显增大,推测颗粒内部存在离散的能级结构。     

纳米铝/金对纳米2,5-二苯基噁唑薄膜荧光特性的调制

以直流溅射方法和真空蒸镀方法结合制备了单组份纳米铝薄膜、纳米金薄膜、纳米2,5-二苯基噁唑(DPO)薄膜和双组份纳米Al/DPO、Au/DPO复合叠层薄膜。利用双势垒伏安特性曲线模拟计算、荧光分光光度计和扫描电镜表征了薄膜样品的电学性质、荧光性质和表面形貌。固态荧光光谱中观察到Au/DPO和Al/DPO叠层结构复合纳米薄膜样品的荧光主峰发生了明显红移。Au/DPO叠层结构复合薄膜样品与单组份DPO纳米薄膜样品的荧光发射光谱相比较,叠层薄膜内相互作用较弱,而Al/DPO叠层结构复合纳米薄膜样品相互作用较强、谱线峰型变化较大,Al的谱线的半高全宽明显增大,推测颗粒内部存在离散的能级结构。     

形貌可控ZnO微纳米结构的水热合成及光催化性能

以乙醇胺为辅助溶剂,采用水热合成法,制备了花状、梭状和剑状的ZnO微纳米结构。采用扫描电镜(SEM)、X射线衍射(XRD)、光致发光光谱(PL)和拉曼光谱等测试手段对样品的形貌、结构、晶相等进行了表征。结果表明所有样品均为六方纤锌矿结构ZnO;其形貌和结晶度可通过改变物质的量的配比nZn2+/nOH-来调控。探讨了反应物配比对产物形貌结构的影响,乙醇胺对不同形貌ZnO的制备起到至关重要作用。以亚甲基蓝为目标降解物,采用紫外-可见吸收光谱(UV-Vis)并结合低温氮吸附-脱附比表面测试(BET),研究了花状、梭状和剑状ZnO的光催化活性。结果表明,与商用ZnO相比,制备的ZnO具有更好的光催化活性;样品催化活性与其比表面积不成正比,具有最小比表面积的花状ZnO拥有最好的光催化活性,这可能是由于其低的结晶度和特殊的花状形貌所致。     

花状结构纳米铟的制备及其摩擦学性能

在多元醇体系中, 用超声波辅助液相分散法成功制备了粒径约为450 nm的花状结构纳米铟, 并用TEM、XRD、TG/DTA等分析手段对制备的样品进行了形貌和结构表征. 结果表明, 花状铟纳米结构由纳米棒和纳米片组成, 与本体铟具有相同的晶体结构. 在四球摩擦实验机上考察了花状结构纳米铟作为润滑油添加剂的摩擦学性能, 实验结果表明, 花状结构纳米铟具有良好的抗磨性能.     

纳米金自组装膜的IgM压电免疫传感器的研究

利用等离子体聚合膜沉积技术和纳米金亚单层自组装技术设计传感器界面，用 于固定羊抗人M抗体，研制了一种新的M压电免疫传感器．先在石英品振上沉积正丁 胺等离子体聚合膜，通过戊二醛交联结合一半肮胺单层膜，利用膜上流基与纳米金 键合组装纳米金亚单层，得到可用于固定18kI抗体的界面，再以牛血清白蛋白 (BSA)和聚乙二醇(PEG)封闭晶振上的非特异性吸附位点．实验探讨了影响纳米金自 组装和抗体包被等主要实验参数和条件；考察了采用此固定化方法传感器的响应性 能，与戊二醛共价交联固定法和金电极表面直接吸附固定法进行了比较．结果表明 ，以纳米金单层作界面固定抗体时，具有传感界面不需活化、固定抗体的活性高、 检测时的非特异性吸附小、传感器能反复再生等优点．将传感器用于实际样品的检 测，结果令人满意．     

OTS自组装单层膜诱导定向生长SrTiO3功能陶瓷薄膜

采用自组装单层膜技术,以三氯十八烷基硅烷(octadecyl-trichioro-silane,OTS)为模版,在玻璃基片上成功制备了钛酸锶晶态薄膜.改性基板的亲水性测定与金相显微镜测试表明,紫外光照射使基板由疏水转变为亲水,OTS单分子膜对薄膜的沉积具有诱导作用:X射线衍射(XRD)与扫描电镜(SEM)表征显示,制备成功的钛酸锶薄膜结晶良好,样品表面均匀,在垂直基板表面方向上呈花状生长:EDS能谱测试为钛酸锶薄膜的化学组成提供了有力的证据;同时探讨了白组装单层膜和钛酸锶薄膜的形成机理.     

类胆碱离子液体中多级结构Bi_2S_3的形貌调控合成

本文通过简单温和的溶液合成方法,在类胆碱离子液体体系中制备了纳米线簇、绒球状、海胆状和纳米花状等不同形貌可控的Bi_2S_3纳米材料.通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)和电子透射电镜(TEM)对样品的形貌与结构进行了分析表征.实验结果表明,IL/H_2O/PEG-200的比例在调控不同形貌的Bi_2S_3形成过程中起到了决定性的作用.同时也研究了离子液体阳离子烷基侧链的长度和反应时间对样品形貌形成过程的影响.基于晶体分裂和溶解-重结晶过程对不同形貌Bi_2S_3样品的形成机理进行了分析讨论.     

Synthesis and characterization of ultrathin WO3 nanodisks utilizing long-chain poly(ethylene glycol)

Metal oxide nanostructures hold great potential for photovoltaic (PV), photoelectrochemical (PEC), and photocatalytic applications. Whereas thin films of various materials of both nanoparticle and nanorod morphologies have been widely investigated, there have been few inquiries into nanodisk structures. Here, we report the synthesis of ultrathin WO3 nanodisks using a wet chemical route with poly(ethylene glycol) (PEG) as a surface modulator. The reported nanodisk structure is based on the interaction of the nonionic 10000 g/mol PEG molecules with tungsten oxoanion precursors. The WO3 nanostructures formed are dominated by very thin disks with dimensions on the nanometer to micrometer scale. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images reveal the structures to have dimensions on the order of 350-1000 nm in length, 200-750 nm in width, and 7-18 nm in thickness and possessing textured single-crystalline features. A number of analytical techniques were used to characterize the WO3 nanodisks, including selected-area electron diffraction (SAED), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), Raman scattering spectroscopy, UV-visible spectrophotometry, and cyclic voltammetry (CV). The growth of the WO3 nanodisks was inhibited in the [010] crystal direction, leading to ultrathin morphologies in the monoclinic crystal phase. The large flat surface area and high aspect ratio of the WO3 nanodisks are potentially useful in PEC cells for hydrogen production via direct water splitting, as has been demonstrated in a preliminary experiment with external bias.     

Physicochemical Interaction of ZnO Fine Particles with 5‐Mono‐(4‐carboxyphenyl)‐10,15,20‐Triphenylporphyrin

This study deals with an investigation on the preparation and physicochemical interactions of ZnO nanoparticles with acid functionalized porphyrin [5‐mono‐(4‐carboxyphenyl)‐10,15,20‐triphenylporphyrin (CPTPP)] for photovoltaic applications in a detailed manner. Zinc acetate and sodium hydroxide were used as the starting materials for the synthesis of ZnO nanoparticles at 60 °C in an alcoholic medium. The freshly prepared fine particles were then functionalized with CPTPP. Both the virgin and pregnant ZnO particles were characterized by using UV‐Visible spectrophotometry (UV), fluorescence emission (PL), Fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The band gap energy obtained for ZnO particles, having a value of 3.47 eV, shows significant quantum confinement effect and enhanced photophysical activity. FTIR analysis of the doped ZnO nanostructures showed the presences of some chemical species. SEM analysis revealed a clear change in the surface morphologies of undoped ZnO. The average crystallite size of nanoparticles, calculated from XRD peaks, was found in the nano regime. The lattice parameters calculated for ZnO nanocrystals were also found in good agreement with those given in the literature. From the enhancement in the red shift of the UV‐Vis spectra, it is concluded that hybridization of acid functionalized porphyrin can cause a significant expansion in the total absorption region of ZnO semiconductor for photovoltaic applications.     

Ultra‐sensitive Amperometric Hydrazine Sensing via Dimethyl Glyoxomat Derived NiO Nanostructures

Here we report the synthesis of NiO nanostructures via glyoxomat assisted precipitation protocol using hydrothermal route under the influence of ammonia followed by annealing at 450 ^oC. These nanostructures were characterized via Scanning Electron Microscopy (SEM) and X‐ray Diffraction (XRD) method. The morphological investigation of the finally prepared NiO revealed foam‐like porous nanostructures. These NiO nanostructures were immobilized onto glassy carbon electrode (GCE) with nafion as binding material and used as highly sensitive and selective sensor for determining hydrazine in the range of 100–500 nM and 600–1600 nM with a calculated limit of detection (LOD) equal to 5 nM. The as prepared sensor was tested for the presence of various interfering species such as Na⁺, Cu²⁺, uric acid, hydrogen peroxide and glucose in the presence of equimolar concentration of hydrazine and negligible interference was noticed. The sensor was further tested for hydrazine detection using square wave voltammetry (SWV) however it only worked in the range of 50–1200 μM. Finally the sensor was successfully implemented for hydrazine determination in real water samples using amperometric protocol.     

One‐Pot Synthesis of Nitrogen‐doped TiO2 Nanowires with Enhanced Photocurrent Generation

A nitrogen‐doped TiO₂ (N‐TiO₂) nanowire film was synthesized via a one‐pot hydrothermal method using triethylamine as nitrogen source. The effect of the concentration of the triethylamine on the films was evaluated. In addition, the N‐TiO₂ nanowires were characterized using field‐emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, and ultraviolet–visible spectroscopy. A 3.2× enhancement of the photocurrent for N‐TiO₂ (0.6) was achieved over the as‐prepared TiO₂ nanowire, under AM1.5G solar illumination. This was due to nitrogen doping, which could narrow the bandgap of titania to extend the adsorption of the catalyst to the visible light region.     

Fructose 1,6‐Bisphosphate Trisodium Salt as A New Phosphorus Source for the Rapid Microwave Synthesis of Porous Calcium–Phosphate Microspheres and their Application in Drug Delivery

Calcium phosphates (CPs), as the major inorganic component of biological hard tissues, have been investigated for applications as biomaterials owing to their excellent biocompatibility. However, the traditional synthetic CPs are usually prepared from inorganic phosphorus and calcium sources. Herein, we report a new strategy for the synthesis of a variety of calcium–phosphate nanostructures, including porous amorphous calcium phosphate (ACP) microspheres, hydroxyapatite (HAP) nanorods, and ACP/HAP composite microspheres, by using fructose 1,6‐bisphosphate trisodium salt (FBP) as an organic phosphorus source in aqueous solution in a rapid microwave‐assisted hydrothermal reaction. The important role of FBP and the effect of the experimental conditions on the formation and evolution of the CPs nanostructures were investigated. The crystal phase and composition of the as‐prepared products were characterized by powder X‐ray diffraction (XRD), FTIR spectroscopy, and thermogravimetric (TGA) analysis and the morphologies of the products were characterized by SEM and TEM. This method is facile, rapid, surfactant‐free, and environmentally friendly. The as‐prepared porous ACP microspheres have a relatively high drug‐loading capacity and good sustained drug‐release behavior; thus, they are promising for applications in drug delivery.     

阳极氧化TiN薄膜制备N掺杂纳米TiO2薄膜及其可见光活性

室温下通过电泳沉积(EPD)的方法在Ti片表面制备TiN薄膜, 然后对TiN薄膜进行阳极氧化得到N掺杂多孔纳米结构的TiO2薄膜. 利用X射线衍射(XRD), X射线光电子能谱(XPS), 扫描电子显微镜(SEM)及光电化学方法对得到的薄膜进行表征. XRD测试结果表明, 经过阳极氧化并在350 ℃空气气氛中退火1 h的薄膜中存在锐钛矿晶型的TiO2. XPS的结果表明, 样品中的N元素取代部分O, 且N的摩尔分数为0.95%. SEM显示, 经阳极氧化后薄膜表面出现多孔纳米结构. 光电化学测试结果显示, 阳极氧化提高了N掺杂TiO2薄膜在可见光下的光电响应. 经阳极氧化并热处理的薄膜在0 V电位及可见光照射下光电流密度为2.325 μA·cm-2, 而单纯热处理的薄膜在相同条件下光电流密度仅为0.475 μA·cm-2. 阳极氧化得到纳米多孔结构提高了N掺杂纳米TiO2薄膜的表面积, 从而对可见光的响应增大.     

NaGdF4:Eu3+/AAO薄膜的制备与表征

采用水热法在多孔阳极氧化铝(AAO)模板上制备了NaGdF<,4>:Eu<'3+>(摩尔分数5.0%)/AAO薄膜,并研究了制备方法、溶液浓度和退火温度对薄膜样品形貌、结构和发光性质的影响.XRD结果表明,在低于500 ℃退火,得到具有NaGdF<,4>六方相结构的NaGdF<,4>:Eu<'3+>/AAO薄膜;而在5...     

Fabrication and characterization of poly(vinyl alcohol)/chitosan hydrogel thin films via UV irradiation

A series of poly(vinyl alcohol)/chitosan (PVA/CTS) hydrogel thin films were prepared via ultraviolet (UV) irradiation, with acrylic acid (AA) monomer added as a crosslinker without the addition of any other photo-initiator. The swelling behaviors, intermolecular chemical bonds, molecular structures, thermal behaviors, degrees of crystallinity, morphologies of the surfaces and internal structure, and their relationship to the AA content were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Poly(acrylic acid) (PAA) and its chemical crosslinks formed in hydrogel films via free-radical reactions were confirmed using FTIR and DSC analyses. The XRD patterns indicated that the degree of crystallinity of the hydrogel films decreased as the PAA content was increased. SEM micrographs showed that a uniform interconnected pore structure was formed through the entire hydrogel structure, and a gradient in the crosslinking density through the film thickness was observed to result from extended irradiation times. The swelling behaviors revealed that the formation of PAA and its crosslinking in the hydrogel thin films improved the pH stability and controlled the degree of swelling while retaining a high swelling rate. The successful formation of chemical crosslinking without any specific photo-initiator improves the natural characteristics of CTS and PVA and imparts the resulting PVA/CTS hydrogel thin films with properties that make them very promising in biomedical applications.     

Facile controlled synthesis of MnO2 nanostructures of novel shapes and their application in batteries

In this paper, MnO2 nanomaterials of different crystallographic types and crystal morphologies have been selectively synthesized via a facile hydrothermal route and electrochemically investigated as the cathode active materials of primary and rechargeable batteries. Beta-MnO2 nano/microstructures, including one-dimensional (1-D) nanowires, nanorods, and nanoneedles, as well as 2-D hexagramlike and dendritelike hierarchical forms, were obtained by simple hydrothermal decomposition of an Mn(NO3)2 solution under controlled reaction conditions. Alpha- and gamma-MnO2 nanowires and nanorods were also prepared on the basis of previous literature. The as-synthesized samples were characterized by instrumental analyses such as XRD, SEM, TEM, and HRTEM. Furthermore, the obtained 1-D alpha- and gamma-MnO2 nanostructures were found to exhibit favorable discharge performance in both primary alkaline Zn-MnO2 cells and rechargeable Li-MnO2 cells, showing their potential applications in high-energy batteries.     

Facile Non‐enzymatic Lactic Acid Sensor Based on Cobalt Oxide Nanostructures

In this study, we have investigated the effect of counter anions on the morphology of cobalt oxide nanostructures. The nanostructures of cobalt oxide are prepared by a low temperature aqueous chemical growth method. The morphology of cobalt oxide nanostructure material was investigated by scanning electron microscopy and the crystalline structure was studied by powder X‐ray diffraction technique. The cobalt oxide nanostructures exhibit the nanowire, lump, bundle of the nanowire and flower‐like morphologies. The XRD study has revealed a cubic phase of cobalt oxide nanostructures. The electro‐catalytic properties of cobalt oxide nanostructures were explored through cyclic voltammetry and amperometric techniques by sensing of lactic acid in the alkaline media. The cobalt oxide nanostructures prepared from cobalt nitrate have shown a well‐resolved redox peak. The proposed mechanism for the non‐enzymatic lactic acid sensor is elucidated by considering the morphology and cyclic voltammetry response. The limit of detection for the sensor was found to be 0.006 mM and it exhibits a linear range from 0.05–3 mM of lactic acid as shown by cyclic voltammetry. The amperometric response has shown the excellent current‐concentration response and the linear range of sensor was found to be 0.1 mM to 5.5 mM. The lactic acid sensor is stable, selective and can be used for practical applications. This study provides an excellent alternative analytical tool for the determination of lactic acid.